Glycogen ß-particles surface characterized by a combination of size exclusion chromatography and pyrene excimer fluorescence before and after ß-amylolysis.

Size exclusion chromatography (SEC) and pyrene excimer formation (PEF) experiments were conducted to characterize the local density profile inside a glycogen sample before (Glycogen) and after (Gly-ß-LD) treatment with ß-amylase. These experiments were conducted to assess whether the density at the periphery of the glycogen particles was very high to limit access to proteins involved in the metabolism of glycogen as predicted by the Tier model or low as suggested by the Gilbert model. SEC analysis indicated that the density inside the Glycogen and Gly-ß-LD samples remained constant with particle size and was not affected by ß-amylolysis. Analysis of the PEF experiments conducted on the Glycogen and Gly-ß-LD samples labeled with 1-pyrenebutyric acid showed that the particles have a dense interior and loose corona. The conclusions reached by the SEC and PEF experiments agree with the Gilbert model and have implications for the association of glycogen ß-particles into larger α-particles.

Analysis of aggregation profile of glucagon using SEC-HPLC and FFF-MALS methods.

Recently, the first generic glucagon for injection was approved for the treatment of severe hypoglycemia. Unlike its brand name recombinant glucagon, the generic glucagon is synthetic. Since glucagon has a high propensity to form aggregates in solution, it is essential to assess the aggregation profile of the synthetic glucagon compared to the recombinant glucagon. In this study, two robust separation methods, size-exclusion chromatography (SEC-HPLC) and field-flow fractionation coupled with a multi-angle light scattering detector (FFF-MALS), were employed to characterize generic and brand glucagon aggregation in six lots (three newly released, three expired). The presence of aggregation in samples was determined from the generated chromatograms and analyzed. The study showed that both products have comparable aggregation profiles. The SEC-HPLC demonstrated that in both glucagon versions, the expired lots had a higher percentage of dimers than the newly released lots, but even at expiration, the amount was negligible (∼0.1%). The FFF-MALS method did not detect any dimers or higher molecular weight aggregates. Further evaluation of the detection limit found that FFF-MALS was unable to detect aggregates at amounts lower than 0.5% of total glucagon. The negligible amounts of dimer detected in the generic and brand glucagon indicate that both versions are physically stable and are not prone to aggregation under clinically relevant conditions.

Multidimensional LC-MS with 1D multi-method option and parallel middle-up and bottom-up MS acquisition for in-depth characterization of antibodies.

Monoclonal antibodies (mAbs) are large and highly heterogeneous species typically characterized using a plethora of analytical methodologies. There is a trend within the biopharmaceutical industry to combine several of these methods in one analytical platform to simultaneously assess multiple structural attributes. Here, a protein analyzer for the fully automated middle-up and bottom-up liquid chromatography-mass spectrometry (LC-MS) analysis of charge, size and hydrophobic variants is described. The multidimensional set-up combines a multi-method option in the first dimension (1D) (choice between size exclusion - SEC, cation exchange - CEX or hydrophobic interaction chromatography - HIC) with second dimension (2D) on-column reversed-phase (RPLC) based desalting, denaturation and reduction prior to middle-up LC-MS analysis of collected 1D peaks and parallel on-column trypsin digestion of denatured and reduced peaks in the third dimension (3D) followed by bottom-up LC-MS analysis in the fourth dimension (4D). The versatile and comprehensive workflow is applied to the characterization of charge, hydrophobic and size heterogeneities associated with an engineered Fc fragment and is complemented with hydrogen-deuterium exchange (HDX) MS and FcRn affinity chromatography - native MS to explain observations in a structural/functional context.

Size exclusion chromatography of biopharmaceutical products: From current practices for proteins to emerging trends for viral vectors, nucleic acids and lipid nanoparticles.

The 21st century has been particularly productive for the biopharmaceutical industry, with the introduction of several classes of innovative therapeutics, such as monoclonal antibodies and related compounds, gene therapy products, and RNA-based modalities. All these new molecules are susceptible to aggregation and fragmentation, which necessitates a size variant analysis for their comprehensive characterization. Size exclusion chromatography (SEC) is one of the reference techniques that can be applied. The analytical techniques for mAbs are now well established and some of them are now emerging for the newer modalities. In this context, the objective of this review article is: i) to provide a short historical background on SEC, ii) to suggest some clear guidelines on the selection of packing material and mobile phase for successful method development in modern SEC; and iii) to highlight recent advances in SEC, such as the use of narrow-bore and micro-bore columns, ultra-wide pore columns, and low-adsorption column hardware. Some important innovations, such as recycling SEC, the coupling of SEC with mass spectrometry, and the use of alternative detectors such as charge detection mass spectrometry and mass photometry are also described. In addition, this review discusses the use of SEC in multidimensional setups and shows some of the most recent advances at the preparative scale. In the third part of the article, the possibility of SEC for the characterization of new modalities is also reviewed. The final objective of this review is to provide a clear summary of opportunities and limitations of SEC for the analysis of different biopharmaceutical products.

Determination of Molecular Dimensions of Carbohydrate Polymers (Polysaccharides) by Size Exclusion Chromatography (SEC).

Calibrated size exclusion chromatography (SEC) is a useful tool for the analysis of molecular dimensions of polysaccharides. The calibration takes place with a set of narrow distributed dextran standards and peak position technique. Adapted columns systems and dissolving processes enable for the adequate separation of carbohydrate polymers. Plant-extracted fructan (a homopolymer with low molar mass and excellent water solubility) and mucilage (differently structured, high molar mass heteropolysaccarides that include existing supramolecular structures, and require a long dissolving time) are presented as examples of the versatility of this technique. Since narrow standards similar to the samples (chemically and structurally) are often unavailable, it must be noted that the obtained molar mass values and distributions by this method are only apparent (relative) values, expressed as dextran equivalents.

Beyond the Surface: A Methodological Exploration of Enzyme Impact along the Cellulose Fiber Cross-Section.

Despite the wide range of analytical tools available for the characterization of cellulose, the in-depth characterization of inhomogeneous, layered cellulose fiber structures remains a challenge. When treating fibers or spinning man-made fibers, the question always arises as to whether the changes in the fiber structure affect only the surface or the entire fiber. Here, we developed an analysis tool based on the sequential limited dissolution of cellulose fiber layers. The method can reveal potential differences in fiber properties along the cross-sectional profile of natural or man-made cellulose fibers. In this analytical approach, carbonyl groups are labeled with a carbonyl selective fluorescence label (CCOA), after which thin fiber layers are sequentially dissolved with the solvent system DMAc/LiCl (9% w/v) and analyzed with size exclusion chromatography coupled with light scattering and fluorescence detection. The analysis of these fractions allowed for the recording of the changes in the chemical structure across the layers, resulting in a detailed cross-sectional profile of the different functionalities and molecular weight distributions. The method was optimized and tested in practice with LPMO (lytic polysaccharide monooxygenase)-treated cotton fibers, where it revealed the depth of fiber modification by the enzyme.

Development of a high throughput oxidation profiling strategy for monoclonal antibody products.

Oxidation is one of the most common degradation pathways of biopharmaceutics, potentially leading to altered product stability, pharmacokinetics, reduced biological activity and/or an increased immunogenicity. However, it is often insufficiently assessed in early development stages, leaving potential molecule liabilities undiscovered. Aim of the present work was the development of a high throughput oxidation profiling strategy, applicable throughout various stages of biopharmaceutical development. The study demonstrates that the combination of multiple stress assays, including peroxide-based, visible light, and metal-catalyzed oxidation (MCO), enables a comprehensive understanding of a mAb's oxidation susceptibility. The most effective parameters to evaluate oxidation in a high-throughput screening workflow are aggregation, tryptophan oxidation and changes in the hydrophobicity profile of the Fc and Fab subunit measured via Size Exclusion Chromatography, Intrinsic Tryptophan Fluorescence Emission spectroscopy and Reversed-Phase Chromatography subunit analysis, respectively. This oxidation profiling approach is valuable tool to systematically characterize the oxidation susceptibility under relevant conditions, time effective and with minimal sample consumption.

Size-Exclusion Chromatography Combined with Ultrafiltration Efficiently Isolates Extracellular Vesicles from Human Blood Samples in Health and Disease.

There is still a need for an efficient method for the isolation of extracellular vesicles (EVs) from human blood that provides a reliable yield with acceptable purity. Blood is a source of circulating EVs, but soluble proteins and lipoproteins hamper their concentration, isolation, and detection. This study aims to investigate the efficiency of EV isolation and characterization methods not defined as "gold standard". EVs were isolated from human platelet-free plasma (PFP) of patients and healthy donors through size-exclusion chromatography (SEC) combined with ultrafiltration (UF). Then, EVs were characterized using transmission electron microscopy (TEM), imaging flow cytometry (IFC), and nanoparticle tracking analysis (NTA). TEM images showed intact and roundish nanoparticles in pure samples. IFC analysis detected a prevalence of CD63+ EVs compared to CD9+, CD81+, and CD11c+ EVs. NTA confirmed the presence of small EVs with a concentration of ~1010 EVs/mL that were comparable when stratifying the subjects by baseline demographics; conversely, concentration differed according to the health status across healthy donors and patients affected with autoimmune diseases (130 subjects in total, with 65 healthy donors and 65 idiopathic inflammatory myopathy (IIM) patients). Altogether, our data show that a combined EV isolation method, i.e., SEC followed by UF, is a reliable approach to isolate intact EVs with a significant yield from complex fluids, which might characterize disease conditions early.

Effect of Lyophilization on Stability of PEG-Protein Conjugate: A Case Study with Peginterferon alfa-2b

Abstract The purpose of the present study was to develop stable lyophilized formulation of peginterferon alfa-2b which is acquiescent to the short lyophilization process. The present study evaluates the effect of buffering components and cryoprotectant(s) on depegylation of the peginterferon alfa-2b in combination with lyophilization process. Finally, a short lyophilization process was identified which can produce a stable pharmaceutical form of peginterferon alfa-2b without any depegylation during long-term storage. Formulations were analyzed mainly for depegylation by HP-size exclusion chromatography and in-vitro antiviral activity. Residual moisture content in the lyophilized product was also used as a key indicating parameter to check its role with respect to depegylation upon storage under various temperature conditions. It was observed that the peginterferon alfa-2b when formulated in presence of cryoprotectant like sucrose requires longer lyophilization process of about 5 days, irrespective of the buffering components used, to reduce the level of residual moisture content and thereby to produce the stable formulation without depegylation. A stable formulation in presence of high concentration of lactose as a cryoprotectant was developed which can withstand stresses exerted to protein-polymer conjugate during lyophilization phases without any significant depegylation. A short lyophilization process of about 48 hours can be utilized for peginterferon alfa-2b when formulated in presence of lactose as a cryoprotectant through which a stable lyophilized formulation can be produced as against longer process required when sucrose is used a cryoprotectant, which is essential from commercial point of view as lyophilization is a costly process.

Caracterización del polirribosilribitol fosfato por cromatografía de exclusión molecular de alta eficacia con detección ultravioleta / Characterization of polyribosylribitol phosphate by high efficiency size exclusion chromatography with ultraviolet detection

Haemophilus influenzae tipo b es un importante patógeno del hombre causante de varias de las enfermedades invasivas en niños menores de cinco años, contra el cual fueron autorizadas las vacunas glicoconjugadas a partir del polirribosilribitol fosfato. Quimi-Hib® es la primera y única vacuna contra este patógeno que utiliza el polisacárido obtenido por síntesis química. El Ingrediente Farmacéutico Activo es producido por el Centro de Ingeniería Genética y Biotecnología y se obtiene a partir de su conjugación al toxoide tetánico. En el presente reporte se hizo una caracterización del polirribosilribitol fosfato mediante la técnica de cromatografía de exclusión molecular de alta eficacia con detección ultravioleta a 215 nm. En el estudio se evaluaron tres lotes y se determinó el perfil de elución en una columna SuperdexTM 75 10/300 GL Increase con un porciento de pureza de 77,42 ± 8,97 y una masa molar promedio de 7.381 Da ± 210,93. La principal impureza presente en el polirribosilribitol fosfato es el dimetilsulfóxido, disolvente utilizado en la reacción de activación con el éster N-hidroxisuccinimidilo del ácido β-maleimidopropiónico. El polirribosilribitol fosfato se purificó por filtración con un Amicon Ultra-15 de 2.000 Da hasta una pureza de 99,1 por ciento y se conjugó al toxoide tetánico. El rendimiento de la reacción de conjugación con el polisacárido purificado fue de 30,0 por ciento 1,77 el cual no muestra diferencias significativas con el control que fue 33,7 por ciento ± 3,57 demostrándose que el dimetilsulfóxido no afecta el desempeño de la reacción de conjugación(AU)

Haemophilus influenzae type b is an important human pathogen causing some invasive diseases in children less than five years of age. Glycoconjugate vaccines based on polyribosylribitol phosphate have been licensed against this bacterium. Quimi-Hib® is the first and only vaccine against this pathogen using the chemically synthesized polysaccharide. The Active Pharmaceutical Ingredient is produced by the Center for Genetic Engineering and Biotechnology and is obtained from its conjugation to tetanus toxoid. In the present report a characterization of polyribosylribitol phosphate was performed by high performance molecular exclusion chromatography with ultraviolet detection at 215 nm. Three batches were evaluated in the study and the elution profile was determined on a SuperdexTM 75 10/300 GL Increase column with a purity percentage of 77.42 ± 8.97 and an average molecular weight of 7,381 Da ± 210.93. The main impurity present in polyribosylribitol phosphate was dimethylsulfoxide, the solvent used in the activation reaction with N-hydroxysuccinimidyl ester of β-maleimidopropionic acid. Polyribosylribitol phosphate was purified by filtration using a 2,000 Da cut-off Amicon Ultra-15 to a purity of 99.1 percent and conjugated to tetanus toxoid. The yield of the conjugation reaction with the purified polysaccharide was 30.0 percent ± 1.77 which shows no significant difference with the control which was 33.7 percent ± 3.57 demonstrating that dimethylsulfoxide does not affect the performance of the conjugation reaction(AU)

Understanding the structure and composition of recalcitrant oligosaccharides in hydrolysate using high-throughput biotin-based glycome profiling and mass spectrometry.

Novel Immunological and Mass Spectrometry Methods for Comprehensive Analysis of Recalcitrant Oligosaccharides in AFEX Pretreated Corn Stover. Lignocellulosic biomass is a sustainable alternative to fossil fuel and is extensively used for developing bio-based technologies to produce products such as food, feed, fuel, and chemicals. The key to these technologies is to develop cost competitive processes to convert complex carbohydrates present in plant cell wall to simple sugars such as glucose, xylose, and arabinose. Since lignocellulosic biomass is highly recalcitrant, it must undergo a combination of thermochemical treatment such as Ammonia Fiber Expansion (AFEX), dilute acid (DA), Ionic Liquid (IL) and biological treatment such as enzyme hydrolysis and microbial fermentation to produce desired products. However, when using commercial fungal enzymes during hydrolysis, only 75-85% of the soluble sugars generated are monomeric sugars, while the remaining 15-25% are soluble recalcitrant oligosaccharides that cannot be easily utilized by microorganisms. Previously, we successfully separated and purified the soluble recalcitrant oligosaccharides using a combination of charcoal and celite-based separation followed by size exclusion chromatography and studies their inhibitory properties on enzymes. We discovered that the oligosaccharides with higher degree of polymerization (DP) containing methylated uronic acid substitutions were more recalcitrant towards commercial enzyme mixtures than lower DP and neutral oligosaccharides. Here, we report the use of several complementary techniques that include glycome profiling using plant biomass glycan specific monoclonal antibodies (mAbs) to characterize sugar linkages in plant cell walls and enzymatic hydrolysate, matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF-MS) using structurally-informative diagnostic peaks offered by negative ion post-secondary decay spectra, gas chromatography followed by mass spectrometry (GC-MS) to characterize oligosaccharide sugar linkages with and without derivatization. Since oligosaccharides (DP 4-20) are small, it is challenging to mobilize these molecules for mAbs binding and characterization. To overcome this problem, we have applied a new biotin-coupling based oligosaccharide immobilization method that successfully tagged most of the low DP soluble oligosaccharides on to a micro-plate surface followed by specific linkage analysis using mAbs in a high-throughput system. This new approach will help develop more advanced versions of future high throughput glycome profiling methods that can be used to separate and characterize oligosaccharides present in biomarkers for diagnostic applications.

Inline-tandem purification of viruses from cell lysate by agarose-based chromatography.

An efficient chromatography-based virus purification method has been developed and validated for the non-pathogenic infectious virus PRD1. Compared to the conventional method that consists of relatively time-consuming and labour-intensive precipitation and density gradient ultracentrifugation steps, the method developed here is performed in a single flow using tandem-coupled anion exchange and size exclusion chromatography (AIEX-SEC) columns. This inline approach helps to minimize the loss of virus in the process and streamlines time consumption, since no physical transfer of the sample is required between purification steps. In the development process, sample feed composition, dynamic binding capacity and elution conditions for the AIEX resin as well as different exclusion limits for SEC resins were optimized to achieve maximal yield of pure infectious viruses. Utilizing this new approach, a high-quality virus sample was produced from a lysate feed in 320 min with a total yield of 13 mg purified particles per litre of cell lysate, constituting a 3.5-fold yield increase as compared to the conventional method, without compromising the high specific infectivity of the product (6 × 1012 to 7 × 1012 pfu/mg of protein). The yield of infectious viruses of the lysate feed was 54%. The easy scalability of chromatography-based methods provide a direct route to industrial usage without any significant changes needed to be made to the purification regime. This is especially interesting as the method has high potential to be used for purification of various viruses and nanoparticles, including adenovirus.

Native Liquid Chromatography and Mass Spectrometry to Structurally and Functionally Characterize Endo-Xylanase Proteoforms.

Xylanases are of great value in various industries, including paper, food, and biorefinery. Due to their biotechnological production, these enzymes can contain a variety of post-translational modifications, which may have a profound effect on protein function. Understanding the structure-function relationship can guide the development of products with optimal performance. We have developed a workflow for the structural and functional characterization of an endo-1,4-ß-xylanase (ENDO-I) produced by Aspergillus niger with and without applying thermal stress. This workflow relies on orthogonal native separation techniques to resolve proteoforms. Mass spectrometry and activity assays of separated proteoforms permitted the establishment of structure-function relationships. The separation conditions were focus on balancing efficient separation and protein functionality. We employed size exclusion chromatography (SEC) to separate ENDO-I from other co-expressed proteins. Charge variants were investigated with ion exchange chromatography (IEX) and revealed the presence of low abundant glycated variants in the temperature-stressed material. To obtain better insights into the effect on glycation on function, we enriched for these species using boronate affinity chromatography (BAC). The activity measurements showed lower activity of glycated species compared to the non-modified enzyme. Altogether, this workflow allowed in-depth structural and functional characterization of ENDO-I proteoforms.

Stability assessment of FDA-approved ramucirumab monoclonal antibody; validated SE-HPLC method for degradation pattern evaluation.

Ramucirumab (RAMU) is a recently US Food and Drug Administration-approved monoclonal antibody that is included in various anticancer protocols. It has a structural complexity and high degradation risk that have a significant effect on its safety and effectiveness. The major aim of this work was to assess the degradation pattern of RAMU based on physicochemical characterization. Mechanical agitation, repeated freeze-thaw cycles, pH and temperature were the selected stress conditions to which RAMU samples were subjected. The SE-HPLC method was applied and validated to monitor the RAMU monomer along with its aggregates and/or fragments. The purity of the separated peaks together with system suitability parameters were determined through the calculation of percentage purity and percentage drop in RAMU concentration. The results were interpreted by correlating them with those of dynamic light scattering and reducing and non-reducing sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Samples incubated at pH 2.0-10.0 and 37°C for up to 4 weeks were analysed, recording detection of reversed phase (RP) aggregates and low molecular weight peptide fragments. Similarly, samples under short-term storage conditions of 4 weeks at different temperatures (-20, 2-8, 25, 37 and 50°C) showed low molecular weight peptide fragments but to a lesser extent. These results highlight the alarming effect on RAMU multidose vial efficacy and safety.

Automated multi-attribute method sample preparation using high-throughput buffer exchange tips.

RATIONALE: The multi-attribute method (MAM) has become a valuable mass spectrometry (MS)-based tool that can identify and quantify the site-specific product attributes and purity information for biotherapeutics such as monoclonal antibodies (mAbs) and fusion molecules in recent years. As we expand the use of the MAM at various stages of drug development, it is critical to enhance the sample preparation throughput without additional chemical modifications and variability. METHODS: In this study, a fully automated MAM sample preparation protocol is presented, where rapid desalting in less than 15 minutes is achieved using miniaturized size-exclusion chromatography columns in pipette tips on an automated liquid handler. The peptide samples were analyzed using an electrospray ionization (ESI) orbitrap mass spectrometer coupled to an ultra-high-performance liquid chromatography (UHPLC) system with a dual column switching system. RESULTS: No significant change was observed in product attributes and their quantities compared with manual, low-artifact sample preparation. The sample recovery using the buffer exchange tips was greatly enhanced over the manual spin cartridges while still demonstrating excellent reproducibility for a wide variety of starting sample concentrations. Unlike a plate desalting system, the individual columns provide flexibility in the number of samples prepared at a time and sample locations within plates. CONCLUSIONS: This automated protocol enables the preparation of up to 96 samples with less "at-bench" time than the manual preparation of a smaller batch of samples, thereby greatly facilitating support of process development and the use of the MAM in quality control.

Characterizing the Diffusion and Rheological Properties of Aged Asphalt Binder Rejuvenated with Bio-Oil Based on Molecular Dynamic Simulations and Laboratory Experimentations.

Soybean-derived bio-oil is one of the vegetable-based oils that is gaining the most interest for potential use in the rejuvenation of aged asphalt binders. This laboratory study was conducted to characterize and quantify the diffusion and rheological properties of bio-oil-rejuvenated aged asphalt binder (BRAA) using soybean oil. In the study, the chemical structure of the soybean oil was comparatively characterized using an element analyzer (EA), gel permeation chromatography (GPC), and a Fourier infrared (FTIR) spectrometer, respectively. Based on the chemical structure of the bio-oil, BRAA molecular models were built for computing the diffusion parameters using molecular dynamic simulations. Likewise, a dynamic shear rheometer (DSR) test device was used for measuring and quantifying the rheological properties of the aged asphalt binder rejuvenated with 0%, 1%, 2%, 3%, 4%, and 5% soybean oil, respectively. The laboratory test results indicate that bio-oil could potentially improve the diffusion coefficients and phase angle of the aged asphalt binder. Similarly, the corresponding decrease in the complex shear modulus has a positive effect on the low-temperature properties of BRAA. For a bio-oil dosage 4.0%, the diffusion coefficients of the BRAA components are 1.52 × 10-8, 1.33 × 10-8, 3.47 × 10-8, 4.82 × 10-8 and 3.92 × 10-8, respectively. Similarly, the corresponding reduction in the complex shear modulus from 1.27 × 107 Pa to 4.0 × 105 Pa suggests an improvement in the low-temperature properties of BRAA. Overall, the study contributes to the literature on the potential use of soybean-derived bio-oil as a rejuvenator of aged asphalt binders.

Post-Column Denaturation-Assisted Native Size-Exclusion Chromatography-Mass Spectrometry for Rapid and In-Depth Characterization of High Molecular Weight Variants in Therapeutic Monoclonal Antibodies.

The high molecular weight (HMW) size variants present in therapeutic monoclonal antibody (mAb) samples need to be closely monitored and characterized due to their impact on product safety and efficacy. Because of the complexity and often low abundances in final drug substance (DS) samples, characterization of such HMW species is challenging and traditionally requires offline enrichment of the HMW species followed by analysis using various analytical tools. Here, we report the development of a postcolumn denaturation-assisted native SEC-MS method that allows rapid and in-depth characterization of mAb HMW species directly from unfractionated DS samples. This method not only provides high-confidence identification of HMW complexes based on accurate mass measurement of both the intact assembly and the constituent subunits but also allows in-depth analysis of the interaction nature and location. In addition, using the extracted ion chromatograms, derived from high-quality, native-like mass spectra, the elution profiles of each noncovalent and/or nondissociable complex can be readily reconstructed, facilitating the comprehension of a complex HMW profile. The utility of this novel method was demonstrated in different applications, ranging from enriched HMW characterization at late stage development, comparability assessment due to process changes, and forced degradation study of coformulated mAbs. As this method does not require prior enrichment, it is thus desirable for providing both rapid and in-depth characterization of HMW species during the development of therapeutic mAbs.

Framework for rapid comparison of extracellular vesicle isolation methods.

Extracellular vesicles (EVs) are released by all cells into biofluids and hold great promise as reservoirs of disease biomarkers. One of the main challenges in studying EVs is a lack of methods to quantify EVs that are sensitive enough and can differentiate EVs from similarly sized lipoproteins and protein aggregates. We demonstrate the use of ultrasensitive, single-molecule array (Simoa) assays for the quantification of EVs using three widely expressed transmembrane proteins: the tetraspanins CD9, CD63, and CD81. Using Simoa to measure these three EV markers, as well as albumin to measure protein contamination, we were able to compare the relative efficiency and purity of several commonly used EV isolation methods in plasma and cerebrospinal fluid (CSF): ultracentrifugation, precipitation, and size exclusion chromatography (SEC). We further used these assays, all on one platform, to improve SEC isolation from plasma and CSF. Our results highlight the utility of quantifying EV proteins using Simoa and provide a rapid framework for comparing and improving EV isolation methods from biofluids.

Enabling online determination of the size-dependent RNA content of lipid nanoparticle-based RNA formulations.

The potential of lipid nanoparticles (LNPs) as nucleic acid delivery vehicles has been demonstrated in recent years, culminating in the emergency use approval of LNP-based mRNA SARS-CoV-2 vaccines in late 2020. The determination of RNA content relative to LNP size can be important to the understanding of efficacy and adverse effects. This work presents the first description of a facile and rapid analytical method for online, size-dependent RNA payload distribution measurement using data from multi-angle light scattering, ultraviolet and refractive index detectors following separation of the LNPs by size-exclusion chromatography. The analysis was validated by size-based fractionation of the LNPs with subsequent offline analysis of the fractions. Four LNPs formulated with different PEG-lipids and different lipid compositions were tested. Good agreement was observed between the online and offline size-based RNA distributions among all four LNPs, demonstrating the utility of the online method for LNP-encapsulated RNA in general, and suggesting a means for simplified biophysical quantitation of a dosing-related critical quality attribute.

Microwave Heating Promotes the S-Alkylation of Aziridine Catalyzed by Molecular Sieves: A Post-Synthetic Approach to Lanthionine-Containing Peptides.

Aziridine derivatives involved in nucleophilic ring-opening reactions have attracted great interest, since they allow the preparation of biologically active molecules. A chemoselective and mild procedure to convert a peptide cysteine residue into lanthionine via S-alkylation on aziridine substrates is presented in this paper. The procedure relies on a post-synthetic protocol promoted by molecular sieves to prepare lanthionine-containing peptides and is assisted by microwave irradiation. In addition, it represents a valuable alternative to the stepwise approach, in which the lanthionine precursor is incorporated into peptides as a building block.