Programmable 3D rigid clathrate hydrogels based on self-assembly of tetrahedral DNA and linker PCR products.

A clathrate tetrahedral DNA gel was assembled by combining tetrahedral DNA and rigid linker PCR products to achieve visible detection of Salmonella spp. This method overcame the shortcomings of AuNPs in coloration and enriched the use of tetrahedral DNA for the visible detection of virtually any target concerned with pathogens.

Ultrasensitive Electrochemical Impedance Detection of Mycoplasma agalactiae DNA by Low-Cost and Disposable Au-Decorated NiO Nanowall Electrodes.

Nanostructured electrodes detecting bacteria or viruses through DNA hybridization represent a promising method, which may be useful in on-field applications where PCR-based methods are very expensive, time-consuming, and require trained personnel. Indeed, electrochemical sensors combine disposability, fast response, high sensitivity, and portability. Here, a low-cost and high-surface-area electrode, based on Au-decorated NiO nanowalls, demonstrates a highly sensitive PCR-free detection of a real sample of Mycoplasma agalactiae (Ma) DNA. NiO nanowalls, synthesized by aqueous methods, thermal annealing, and Au decoration, by electroless deposition, ensure a high-surface-area platform for successful immobilization of Ma thiolated probe DNA. The morphological, chemical, and electrochemical properties of the electrode were characterized, and a reproducible detection of synthetic Ma DNA was observed and investigated by impedance measurements. Electrochemical impedance spectroscopy (EIS) ascribed the origin of impedance signal to the Ma DNA hybridization with its probe immobilized onto the electrode. The electrode successfully discriminates between DNA extracted from healthy and infected sheep milk, showing the ability to detect Ma DNA in concentrations as low as 53 ± 2 copy number µL-1. The Au-decorated NiO nanowall electrode represents a promising route toward PCR-free, disposable, rapid, and molecular detection.

Chemical synthesis rewriting of a bacterial genome to achieve design flexibility and biological functionality.

Understanding how to program biological functions into artificial DNA sequences remains a key challenge in synthetic genomics. Here, we report the chemical synthesis and testing of Caulobacter ethensis-2.0 (C. eth-2.0), a rewritten bacterial genome composed of the most fundamental functions of a bacterial cell. We rebuilt the essential genome of Caulobacter crescentus through the process of chemical synthesis rewriting and studied the genetic information content at the level of its essential genes. Within the 785,701-bp genome, we used sequence rewriting to reduce the number of encoded genetic features from 6,290 to 799. Overall, we introduced 133,313 base substitutions, resulting in the rewriting of 123,562 codons. We tested the biological functionality of the genome design in C. crescentus by transposon mutagenesis. Our analysis revealed that 432 essential genes of C. eth-2.0, corresponding to 81.5% of the design, are equal in functionality to natural genes. These findings suggest that neither changing mRNA structure nor changing the codon context have significant influence on biological functionality of synthetic genomes. Discovery of 98 genes that lost their function identified essential genes with incorrect annotation, including a limited set of 27 genes where we uncovered noncoding control features embedded within protein-coding sequences. In sum, our results highlight the promise of chemical synthesis rewriting to decode fundamental genome functions and its utility toward the design of improved organisms for industrial purposes and health benefits.

Development and characterization of a synthetic DNA, NUversa, to be used as a standard in quantitative polymerase chain reactions for molecular pneumococcal serotyping.

Identification of Streptococcus pneumoniae and its more than 90 serotypes is routinely conducted by culture and Quellung reactions. Quantitative polymerase chain reactions (qPCRs) have been developed for molecular detection, including a pan-pneumococcus lytA assay, and assays targeting 79 serotypes. Reactions require genomic DNA from every target to prepare standards, which can be time consuming. In this study, we have developed a synthetic DNA molecule as a surrogate for genomic DNA and present new single-plex qPCR reactions to increase molecular detection to 94 pneumococcal serotypes. Specificity of these new reactions was confirmed with a limit of detection between 2 and 20 genome equivalents/reaction. A synthetic DNA (NUversa, ∼8.2 kb) was then engineered to contain all available qPCR targets for serotyping and lytA. NUversa was cloned into pUC57-Amp-modified to generate pNUversa (∼10.2 kb). Standards prepared from pNUversa and NUversa were compared against standards made out of genomic DNA. Linearity [NUversa (R2 > 0.982); pNUversa (R2 > 0.991)] and efficiency of qPCR reactions were similar to those utilizing chromosomal DNA (R2 > 0.981). Quantification with plasmid pNUversa was affected, however, whereas quantification with synthetic NUversa was comparable to that of genomic DNA. Therefore, NUversa may be utilized as DNA standard in single-plex assays of the currently known 94 pneumococcal serotypes.

Design and synthesis of a minimal bacterial genome.

We used whole-genome design and complete chemical synthesis to minimize the 1079-kilobase pair synthetic genome of Mycoplasma mycoides JCVI-syn1.0. An initial design, based on collective knowledge of molecular biology combined with limited transposon mutagenesis data, failed to produce a viable cell. Improved transposon mutagenesis methods revealed a class of quasi-essential genes that are needed for robust growth, explaining the failure of our initial design. Three cycles of design, synthesis, and testing, with retention of quasi-essential genes, produced JCVI-syn3.0 (531 kilobase pairs, 473 genes), which has a genome smaller than that of any autonomously replicating cell found in nature. JCVI-syn3.0 retains almost all genes involved in the synthesis and processing of macromolecules. Unexpectedly, it also contains 149 genes with unknown biological functions. JCVI-syn3.0 is a versatile platform for investigating the core functions of life and for exploring whole-genome design.

Synthetic genomics and the construction of a synthetic bacterial cell.

The first synthetic cellular organism was created in 2010 and based on a very small, very simple bacterium called Mycoplasma mycoides. The bacterium was called synthetic because its DNA genome was chemically synthesized rather than replicated from an existing template DNA, as occurs in all other known cellular life on Earth. The experiment was undertaken in order to develop a system that would allow creation of a minimal bacterial cell that could lead to a better understand of the first principles of cellular life. The effort resulted in new synthetic genomics techniques called genome assembly and genome transplantation. The ability of scientists to design and build bacteria opens new possibilities for creating microbes to solve human problems.

Synthetic biology: now that we're creators, what should we create?

A 'synthetic' microbe has been created by introducing the artificially produced genome of one species into the cytoplasm of another. The technology allows the introduction of easily transferable adaptive units, as well as sets of genes that have likely never been transferred successfully.

Creation of a bacterial cell controlled by a chemically synthesized genome.

We report the design, synthesis, and assembly of the 1.08-mega-base pair Mycoplasma mycoides JCVI-syn1.0 genome starting from digitized genome sequence information and its transplantation into a M. capricolum recipient cell to create new M. mycoides cells that are controlled only by the synthetic chromosome. The only DNA in the cells is the designed synthetic DNA sequence, including "watermark" sequences and other designed gene deletions and polymorphisms, and mutations acquired during the building process. The new cells have expected phenotypic properties and are capable of continuous self-replication.

The mutagenicity of thymidine glycol in Escherichia coli is increased when it is part of a tandem lesion.

Tandem lesions are comprised of two contiguously damaged nucleotides. Tandem lesions make up the major family of reaction products generated from a pyrimidine nucleobase radical, which are formed in large amounts by ionizing radiation. One of these tandem lesions contains a thymidine glycol lesion flanked on its 5'-side by 2-deoxyribonolactone (LTg). The replication of this tandem lesion was investigated in Escherichia coli using single-stranded genomes. LTg is a much more potent replication block than thymidine glycol and is bypassed only under SOS-induced conditions. The adjacent thymidine glycol does not significantly affect nucleotide incorporation opposite 2-deoxyribonolactone in wild-type cells. In contrast, the misinsertion frequency opposite thymidine glycol, which is negligible in the absence of 2-deoxyribonolactone, increases to 10% in wild-type cells when LTg is flanked by a 3'-dG. Experiments in which the flanking nucleotides are varied and in cells lacking one of the SOS-induced bypass polymerases indicate that the mutations are due to a mechanism in which the primer misaligns prior to bypassing the lesion, which allows for an additional nucleotide to be incorporated across from the 3'-flanking nucleotide. Subsequent realignment and extension results in the observed mutations. DNA polymerases II and IV are responsible for misalignment induced mutations and compete with DNA polymerase V which reads through the tandem lesion. These experiments reveal that incorporation of the thymidine glycol into a tandem lesion indirectly induces increases in mutations by blocking replication, which enables the misalignment-realignment mechanism to compete with direct bypass by DNA polymerase V.

Complete chemical synthesis, assembly, and cloning of a Mycoplasma genitalium genome.

We have synthesized a 582,970-base pair Mycoplasma genitalium genome. This synthetic genome, named M. genitalium JCVI-1.0, contains all the genes of wild-type M. genitalium G37 except MG408, which was disrupted by an antibiotic marker to block pathogenicity and to allow for selection. To identify the genome as synthetic, we inserted "watermarks" at intergenic sites known to tolerate transposon insertions. Overlapping "cassettes" of 5 to 7 kilobases (kb), assembled from chemically synthesized oligonucleotides, were joined by in vitro recombination to produce intermediate assemblies of approximately 24 kb, 72 kb ("1/8 genome"), and 144 kb ("1/4 genome"), which were all cloned as bacterial artificial chromosomes in Escherichia coli. Most of these intermediate clones were sequenced, and clones of all four 1/4 genomes with the correct sequence were identified. The complete synthetic genome was assembled by transformation-associated recombination cloning in the yeast Saccharomyces cerevisiae, then isolated and sequenced. A clone with the correct sequence was identified. The methods described here will be generally useful for constructing large DNA molecules from chemically synthesized pieces and also from combinations of natural and synthetic DNA segments.

The early years--across the bench from Bruce (1963-1966).

This personal reflection on the author's experience as Bruce Merrifield's first graduate student has been adapted from a talk given at the Merrifield Memorial Symposium at the Rockefeller University on November 13, 2006.

Synthetic agonists of Toll-like receptors 7, 8 and 9.

TLRs (Toll-like receptors) are a family of innate immune receptors that induce protective immune responses against infections. Single-stranded viral RNA and bacterial DNA containing unmethylated CpG motifs are the ligands for TLR7 and TLR8 and 9 respectively. We have carried out extensive structure-activity relationship studies of DNA- and RNA-based compounds to elucidate the impact of nucleotide motifs and structures on these TLR-mediated immune responses. These studies have led us to design novel DNA- and RNA-based compounds, which act as potent agonists of TLR9 and TLR7 and 8 respectively. These novel synthetic agonists produce different immune response profiles depending on the structures and nucleotide motifs present in them. The ability to modulate TLR-mediated immune responses with these novel DNA- and RNA-based agonists in a desired fashion may allow targeting a broad range of diseases, including cancers, asthma, allergies and infections, alone or in combination with other therapeutic agents, and their use as adjuvants with vaccines. IMO-2055, our first lead candidate, is a TLR9 agonist that is currently in clinical evaluation in oncology patients. A second candidate, IMO-2125, is also a TLR9 agonist that has been shown to induce high and sustained levels of IFN (interferon) in non-human primates and is being evaluated in HepC-infected human subjects.

Development and application of real-time PCR assays for quantification of erm genes conferring resistance to macrolides-lincosamides-streptogramin B in livestock manure and manure management systems.

Erythromycin and tylosin are commonly used in animal production, and such use is perceived to contribute to the overall antimicrobial resistance (AR) reservoirs. Quantitative measurements of this type of AR reservoir in microbial communities are required to understand AR ecology (e.g., emergence, persistence, and dissemination). We report here the development, validation, and use of six real-time PCR assays for quantifying six classes of erm genes (classes A through C, F, T, and X) that encode the major mechanism of resistance to macrolides-lincosamides-streptogramin B (MLS(B)). These real-time PCR assays were validated and used in quantifying the six erm classes in five types of samples, including those from bovine manure, swine manure, compost of swine manure, swine waste lagoons, and an Ekokan upflow biofilter system treating hog house effluents. The bovine manure samples were found to contain much smaller reservoirs of each of the six erm classes than the swine manure samples. Compared to the swine manure samples, the composted swine manure samples had substantially reduced erm gene abundances (by up to 7.3 logs), whereas the lagoon or the biofilter samples had similar erm gene abundances. These preliminary results suggest that the methods of manure storage and treatment probably have a substantial impact on the persistence and decline of MLS(B) resistance originating from food animals, thus likely affecting the dissemination of such resistance genes into the environment. The abundances of these erm genes appeared to be positively correlated with those of the tet genes determined previously among these samples. These real-time PCR assays provide a rapid, quantitative, and cultivation-independent measurement of six major classes of erm genes, which should be useful for ecological studies of AR.

Stepwise binding and bending of DNA by Escherichia coli integration host factor.

Integration host factor (IHF) is a prokaryotic protein required for the integration of lambda phage DNA into its host genome. An x-ray crystal structure of the complex shows that IHF binds to the minor groove of DNA and bends the double helix by 160 degrees [Rice PA, Yang S, Mizuuchi K, Nash HA (1996) Cell 87:1295-1306]. We sought to dissect the complex formation process into its component binding and bending reaction steps, using stopped-flow fluorimetry to observe changes in resonance energy transfer between DNA-bound dyes, which in turn reflect distance changes upon bending. Different DNA substrates that are likely to increase or decrease the DNA bending rate were studied, including one with a nick in a critical kink position, and a substrate with longer DNA ends to increase hydrodynamic friction during bending. Kinetic experiments were carried out under pseudofirst-order conditions, in which the protein concentration is in substantial excess over DNA. At lower concentrations, the reaction rate rises linearly with protein concentration, implying rate limitation by the bimolecular reaction step. At high concentrations the rate reaches a plateau value, which strongly depends on temperature and the nature of the DNA substrate. We ascribe this reaction limit to the DNA bending rate and propose that complex formation is sequential at high concentration: IHF binds rapidly to DNA, followed by slower DNA bending. Our observations on the bending step kinetics are in agreement with results using the temperature-jump kinetic method.

Viscoelastic modeling of template-directed DNA synthesis.

In the present study, we have used the QCM-D technology to study the replication of surface attached oligonucleotide template strands using Escherichia coli DNA polymerase I (Klenow fragment, KF). Changes in resonance frequency (F) and energy dissipation (D) for DNA hybridization and polymerization were recorded at multiple harmonics. Formation of the polymerase/DNA complex led to a significant decrease in energy dissipation, which is consistent with a conformational change induced upon enzyme binding. This interpretation was further strengthened by a data analysis using a Voigt-based viscoelastic model. The analysis revealed a significant increase in shear viscosity and shear modulus during KF binding, whereas the viscoelastic properties of single- and double-stranded templates were almost identical. During the actual DNA synthesis, an initial increase in rigidity (shear viscosity) was followed by a gradual decrease that has two components corresponding to the release of enzyme and to the presence of the catalytically active enzyme/substrate complex. The corresponding decrease in surface concentration was found to underestimate the rate of enzyme release due to viscously coupled water that compensates for the loss in enzyme mass. Furthermore, the modeling elucidates that significant changes in both F and D originate from variations in the viscoelastic properties, which means that changes in F alone should be used with care for estimations of coupled mass and kinetics. Therefore, the modeled temporal variation in effective thickness, being proportional to coupled mass and, thus, independent of structural changes, was used to estimate the catalytic constants of the polymerization reaction. The reported work is the first example providing this type of structural information for the catalytic action of an enzyme, thereby demonstrating the potential of the technique for advanced analysis of complex biological reactions, including proper analysis of enzyme kinetics.