RESUMO
Low-cost improvised continuous positive airway pressure (CPAP) device is safe and efficacious in neonatal respiratory distress. There is a great necessity for similar device in adults, and this has been especially made apparent by the recent Coronavirus Disease 2019 (COVID-19) pandemic, which is unmasking the deficiencies of healthcare system in several low-resource countries. We propose a simplified and inexpensive model of improvised CPAP in adults using locally available resources including aquarium air pumps and a novel pressure release mechanism. Although the safety and efficacy of improvised CPAP in adults are not established, the conceptual model we propose has the potential to serve as a lifesaving technology in many low-resource settings during this ongoing pandemic and thus calls for expedited research.
Assuntos
COVID-19/terapia , Pressão Positiva Contínua nas Vias Aéreas/instrumentação , Desenho de Equipamento/economia , Terapia Respiratória/instrumentação , Adulto , Humanos , Ventilação não Invasiva/instrumentação , SARS-CoV-2RESUMO
BACKGROUND: In silico medicine allows for pre-clinical and clinical simulated assessment of medical technologies and the building of patient-specific models to support medical decisions and forecast personal health status. While there is increasing trust in the potential central role of in silico medicine, there is a need to recognize its degree of reliability and evaluate its economic impact. An in silico platform has been developed within a Horizon 2020-funded project (In-Silc) for simulations functional to designing, developing, and assessing drug-eluting bioresorbable vascular scaffolds.The main purpose of this study was to compare the costs of 2 alternative strategies: the adoption of In-Silc platform versus the performance of only physical bench tests. METHODS: A case study was provided by a medical device company. The values of the model parameters were principally set by the project partners, with use of interviews and semi-structured questionnaires, and, when not available, through literature searches or derived by statistical techniques. An economic model was built to represent the 2 scenarios. RESULTS: The InSilc strategy is superior to the adoption of physical bench tests only. Ceteris paribus, the costs are 424,355 for the former versus 857,811 for the latter. CONCLUSIONS: In silico medicine tools can decrease the cost of the research and development of medical devices such as bioresorbable vascular scaffolds. Further studies are needed to explore the impact of such solutions on the innovation capacity of companies and the consequent potential advantages for target patients and the healthcare system.
Assuntos
Implantes Absorvíveis , Simulação por Computador/economia , Stents Farmacológicos , Desenho de Equipamento/métodos , Teste de Materiais/métodos , Desenho Assistido por Computador , Análise Custo-Benefício , Desenho de Equipamento/economia , Humanos , Teste de Materiais/economia , Reprodutibilidade dos TestesRESUMO
High-throughput, high-accuracy detection of emerging viruses allows for the control of disease outbreaks. Currently, reverse transcription-polymerase chain reaction (RT-PCR) is currently the most-widely used technology to diagnose the presence of SARS-CoV-2. However, RT-PCR requires the extraction of viral RNA from clinical specimens to obtain high sensitivity. Here, we report a method for detecting novel coronaviruses with high sensitivity by using nanopores together with artificial intelligence, a relatively simple procedure that does not require RNA extraction. Our final platform, which we call the artificially intelligent nanopore, consists of machine learning software on a server, a portable high-speed and high-precision current measuring instrument, and scalable, cost-effective semiconducting nanopore modules. We show that artificially intelligent nanopores are successful in accurately identifying four types of coronaviruses similar in size, HCoV-229E, SARS-CoV, MERS-CoV, and SARS-CoV-2. Detection of SARS-CoV-2 in saliva specimen is achieved with a sensitivity of 90% and specificity of 96% with a 5-minute measurement.
Assuntos
Inteligência Artificial , Teste de Ácido Nucleico para COVID-19/métodos , Aprendizado de Máquina , Nanoporos , Teste de Ácido Nucleico para COVID-19/instrumentação , Coronavirus Humano 229E/genética , Desenho de Equipamento/economia , Humanos , Limite de Detecção , Coronavírus da Síndrome Respiratória do Oriente Médio/genética , Nanopartículas/química , Reação em Cadeia da Polimerase , SARS-CoV-2/genética , Saliva/virologia , Sensibilidade e Especificidade , SoftwareRESUMO
INTRODUCTION: Heart exploration is an essential clinical competence that requires continuous training and exposure. Low availability and accessibility to patients with heart disease constitutes a barrier to acquiring this competence. Inadequate cardiac auscultation skills in medical students, residents, and graduate physicians have been documented. OBJECTIVE: To develop and validate a low-cost, high-fidelity simulator for heart exploration. METHODS: A low-cost, high-fidelity heart examination simulator capable of reproducing normal cardiac sounds was designed and developed. Subsequently, the simulator was validated by a group of experts who gave their opinion according to a Likert scale. RESULTS: Ninety-four percent agreed that the simulator motivates the learning of heart exploration, and 92 % considered it to be a realistic model; 91 % considered that the simulator is an attractive tool to reinforce learning and 98 % recommended its further use. CONCLUSIONS: The use of the simulator facilitates the acquisition of skills and stimulates learning in the student, which can be attributed to repeated practice, longer exposure time and cognitive interaction.
INTRODUCCIÓN: La exploración cardiaca es una competencia clínica fundamental que requiere exposición o entrenamiento continuo. La baja disponibilidad y accesibilidad de pacientes con patología cardiaca constituye una barrera para adquirir esta competencia. Se han documentado inadecuadas habilidades de auscultación cardiaca en estudiantes de medicina, residentes y médicos graduados. OBJETIVO: Elaborar y validar un simulador de alta fidelidad y bajo costo para exploración cardiaca. MÉTODOS: Se diseñó y elaboró un simulador para exploración cardiaca, realista y de bajo costo capaz de reproducir ruidos cardiacos normales. Posteriormente se realizó la validación del simulador por un grupo de expertos que emitieron su opinión de acuerdo con una escala tipo Likert. RESULTADOS: El 94 % afirmó que el simulador motiva el aprendizaje de la exploración cardiaca y 92 % lo consideró un modelo realista; 91 % consideró que el simulador es una herramienta atractiva para fortalecer el aprendizaje y 98 % recomendó seguir utilizándolo. CONCLUSIONES: El uso del simulador facilita la adquisición de competencias y estimula el aprendizaje en el estudiante, lo cual puede ser atribuido a la práctica deliberada, a un mayor tiempo de exposición y a la interacción cognitiva.
Assuntos
Desenho de Equipamento , Ruídos Cardíacos , Treinamento com Simulação de Alta Fidelidade/métodos , Fonocardiografia/instrumentação , Desenho de Equipamento/economia , Treinamento com Simulação de Alta Fidelidade/economia , Humanos , Fonocardiografia/economia , Reprodutibilidade dos TestesRESUMO
Rapid developments of robotics and virtual reality technology are raising the requirements of more advanced human-machine interfaces for achieving efficient parallel control. Exoskeleton as an assistive wearable device, usually requires a huge cost and complex data processing to track the multi-dimensional human motions. Alternatively, we propose a triboelectric bi-directional sensor as a universal and cost-effective solution to a customized exoskeleton for monitoring all of the movable joints of the human upper limbs with low power consumption. The corresponding movements, including two DOF rotations of the shoulder, twisting of the wrist, and the bending motions, are detected and utilized for controlling the virtual character and the robotic arm in real-time. Owing to the structural consistency between the exoskeleton and the human body, further kinetic analysis offers additional physical parameters without introducing other types of sensors. This exoskeleton sensory system shows a great potential of being an economic and advanced human-machine interface for supporting the manipulation in both real and virtual worlds, including robotic automation, healthcare, and training applications.
Assuntos
Desenho de Equipamento/instrumentação , Exoesqueleto Energizado , Aparelhos Ortopédicos , Amplitude de Movimento Articular/fisiologia , Robótica/instrumentação , Extremidade Superior/fisiologia , Simulação por Computador , Desenho de Equipamento/economia , Desenho de Equipamento/métodos , Humanos , Articulações/fisiologia , Movimento/fisiologia , Robótica/economia , Robótica/métodosRESUMO
In this work, the design, modeling, and development of a low-cost lower limb exoskeleton (LLES) system are presented for paediatric rehabilitation (age: 8-12 years, mass: 25-40 kg, height: 115-125 cm). The exoskeleton system, having three degrees-of-freedom (DOFs) for each limb, is designed in the SolidWorks software. A wheel support module is introduced in the design to ensure the user's stability and safety. The finite element analysis of the hip joint connector along with the wheel support module is realized for maximum loading conditions. The holding torque capacity of exoskeleton joints is estimated using an affordable spring-based experimental setup. A working prototype of the LLES is developed with holding torque rated actuators. Thereafter, the dynamic analysis for the human-exoskeleton coupled system is carried out using the Euler-Lagrange principle and SimMechanics model. The simulation results of estimating joint actuator torques are obtained for two paraplegic subjects (Case I: 10 years age, 30 kg mass, 120 cm height and Case II: 12 years age, 40 kg mass, 125 cm height). The details of input parameters such as body mass, link lengths, joint angles, and contact forces are discussed. The simulation results of dynamic analysis have shown the potential of estimating the torques of joint actuators for the developed prototype during motion assistance and gait rehabilitation.
Assuntos
Desenho de Equipamento , Exoesqueleto Energizado/economia , Marcha , Perna (Membro) , Pediatria , Reabilitação , Fenômenos Biomecânicos , Criança , Desenho de Equipamento/economia , Articulação do Quadril , Humanos , Masculino , TorqueRESUMO
Strictly anaerobic bacteria are important to both human health and industrial usage. These bacteria are sensitive to oxygen, therefore, it is preferable to manipulate these microbes in an anaerobic chamber. However, commercial anaerobic chambers (CACs) are expensive, making them less accessible to scientists with a limited budget, especially to those in developing countries. The high price of commercial chambers has hindered, at least partially, the progress of research on anaerobes in developing countries. In the research presented here, we developed an inexpensive and reliable anaerobic chamber and successfully achieved routine maintenance of eleven strictly anaerobic bacterial strains. Furthermore, genetic manipulation examples have been set for both Clostridioidesdifficile 630 and Clostridiumbeijerinckii NCIMB 8052 strains to validate that the chamber could applied to advanced genetic engineering of strictly anaerobes. C. difficile and C. beijerinckii were both genetically manipulated in this chamber, showing it's utility for the genetic engineering of anaerobes. Most importantly, the anaerobic chamber was 76% - 88% less expensive than a CACs and has similar functionality with regards to the cultivation and manipulation of strictly anaerobic bacteria. The anaerobic chamber described in this study will promote the research of anaerobes in developing counties and scientists who have limited research budgets.
Assuntos
Bactérias Anaeróbias/genética , Clostridium/genética , Desenho de Equipamento/economia , Fusobacterium/genética , Engenharia Genética/economia , Engenharia Genética/instrumentação , Engenharia Genética/métodos , Bactérias Anaeróbias/crescimento & desenvolvimento , Clostridium/crescimento & desenvolvimento , Fusobacterium/crescimento & desenvolvimento , HumanosRESUMO
Resumen Introducción: La exploración cardiaca es una competencia clínica fundamental que requiere exposición o entrenamiento continuo. La baja disponibilidad y accesibilidad de pacientes con patología cardiaca constituye una barrera para adquirir esta competencia. Se han documentado inadecuadas habilidades de auscultación cardiaca en estudiantes de medicina, residentes y médicos graduados. Objetivo: Elaborar y validar un simulador de alta fidelidad y bajo costo para exploración cardiaca. Métodos: Se diseñó y elaboró un simulador para exploración cardiaca, realista y de bajo costo capaz de reproducir ruidos cardiacos normales. Posteriormente se realizó la validación del simulador por un grupo de expertos que emitieron su opinión de acuerdo con una escala tipo Likert. Resultados: El 94 % afirmó que el simulador motiva el aprendizaje de la exploración cardiaca y 92 % lo consideró un modelo realista; 91 % consideró que el simulador es una herramienta atractiva para fortalecer el aprendizaje y 98 % recomendó seguir utilizándolo. Conclusiones: El uso del simulador facilita la adquisición de competencias y estimula el aprendizaje en el estudiante, lo cual puede ser atribuido a la práctica deliberada, a un mayor tiempo de exposición y a la interacción cognitiva.
Abstract Introduction: Heart exploration is an essential clinical competence that requires continuous training and exposure. Low availability and accessibility to patients with heart disease constitutes a barrier to acquiring this competence. Inadequate cardiac auscultation skills in medical students, residents, and graduate physicians have been documented. Objective: To develop and validate a low-cost, high-fidelity simulator for heart exploration. Methods: A low-cost, high-fidelity heart examination simulator capable of reproducing normal cardiac sounds was designed and developed. Subsequently, the simulator was validated by a group of experts who gave their opinion according to a Likert scale. Results: Ninety-four percent agreed that the simulator motivates the learning of heart exploration, and 92 % considered it to be a realistic model; 91 % considered that the simulator is an attractive tool to reinforce learning and 98 % recommended its further use. Conclusions: The use of the simulator facilitates the acquisition of skills and stimulates learning in the student, which can be attributed to repeated practice, longer exposure time and cognitive interaction.
Assuntos
Humanos , Fonocardiografia/instrumentação , Ruídos Cardíacos , Desenho de Equipamento/economia , Treinamento com Simulação de Alta Fidelidade/métodos , Fonocardiografia/economia , Reprodutibilidade dos Testes , Treinamento com Simulação de Alta Fidelidade/economiaRESUMO
Disposable N95 respirator masks are the current standard for healthcare worker respiratory protection in the COVID-19 pandemic. In addition to shortages, qualitative fit testing can have low sensitivity for detecting poor fit, leading to inconsistent protection. Multiple groups have developed alternative solutions such as modified snorkel masks to overcome these limitations, but validation of these solutions has been lacking. We sought to determine if N95s and snorkel masks with attached high-efficiency filters provide consistent protection levels in healthcare workers and if the addition of positive pressure via an inexpensive powered-air purifying respirator to the snorkel mask would provide enhanced protection. Fifty-one healthcare workers who were qualitatively fitted with N95 masks underwent quantitative mask fit testing according to a simulated workplace exercise protocol. N95, snorkel masks with high-efficiency filters and snorkel masks with powered-air purifying respirators were tested. Respiratory filtration ratios were collected for each step and averaged to obtain an overall workplace protocol fit factor. Failure was defined as either an individual filtration ratio or an overall fit factor below 100. N95s and snorkel masks with high-efficiency filters failed one or more testing steps in 59% and 20% of participants, respectively, and 24% and 12% failed overall fit factors, respectively. The snorkel masks with powered-air purifying respirators had zero individual or overall failures. N95 and snorkel masks with high-efficiency filter respirators were found to provide inconsistent respiratory protection in healthcare workers.
Assuntos
COVID-19/prevenção & controle , Análise Custo-Benefício/normas , Pessoal de Saúde/normas , Máscaras/normas , Respiradores N95/normas , Adulto , COVID-19/economia , Estudos de Coortes , Desenho de Equipamento/economia , Desenho de Equipamento/normas , Feminino , Pessoal de Saúde/economia , Humanos , Masculino , Máscaras/economia , Pessoa de Meia-Idade , Respiradores N95/economia , Exposição Ocupacional/economia , Exposição Ocupacional/prevenção & controle , Equipamento de Proteção Individual/economia , Equipamento de Proteção Individual/normas , Estudos Prospectivos , Reprodutibilidade dos TestesRESUMO
Introduction: Negative pressure wound therapy (NPWT) has become a mainstay in the armamentarium for wound care. Since the initial commercial vacuum-assisted closure device became available in 1995, subsequent research has confirmed the positive physiological effects of negative pressure on wound healing. Traditionally, NPWT has been used to improve healing of open nonsurgical wounds by secondary intention. However, the clinical applications of NPWT have significantly broadened, and now also include use in open surgical wounds, closed surgical incisions, and skin graft surgery. In addition, devices have evolved and now include functionality and features such as instillation, antimicrobial sponges, and portability.Areas covered: This article reviews the history, background, and physiology underlying NPWT, as well as the most commonly used devices. In addition, an evidence-based discussion of the current clinical applications of NPWT is presented, with a focus on those with high levels of evidence.Expert opinion: Future directions for device development include modifications to increase ease of use by patients and to allow its use in a broader array of anatomic areas. Lastly, more research with high levels of evidence is needed to better define the outcomes associated with NPWT, including in relation to specific clinical applications and cost.
Assuntos
Tratamento de Ferimentos com Pressão Negativa/instrumentação , Ensaios Clínicos como Assunto , Análise Custo-Benefício , Desenho de Equipamento/economia , Humanos , Tratamento de Ferimentos com Pressão Negativa/economia , Transplante de Pele , Cicatrização/fisiologiaAssuntos
Dermoscopia/instrumentação , Microscopia Confocal/instrumentação , Sistemas Automatizados de Assistência Junto ao Leito/economia , Dermatopatias/diagnóstico , Pele/diagnóstico por imagem , Dermoscopia/economia , Dermoscopia/métodos , Desenho de Equipamento/economia , Estudos de Viabilidade , Humanos , Processamento de Imagem Assistida por Computador/economia , Processamento de Imagem Assistida por Computador/instrumentação , Microscopia Confocal/economia , Microscopia Confocal/métodos , Sistemas Automatizados de Assistência Junto ao Leito/organização & administração , Smartphone/economiaRESUMO
Keyboard input has played an essential role in human-computer interaction with a vast user base, and the keyboard design has always been one of the fundamental objects of studies on smart devices. With the development of screen technology, more precise data and indicators could be collected by smartphones to in-depth evaluate the keyboard design. The enlargement of the phone screen has led to unsatisfactory input experience and finger pain, especially for one-handed input. The input efficiency and comfort have attracted the attention of researchers and designers, and the curved keyboard with size-adjustable buttons, which roughly accorded with the physiological structure of thumbs, was proposed to optimize the one-handed usage on large-screen smartphones. However, its real effects remained ambiguous. Therefore, this protocol demonstrated a general and summarized method to evaluate the effect of curved QWERTY keyboard design on a 5-inch smartphone through a self-developed software with detailed variables, including objective behavioral data, subjective feedback, and the coordinate data of each touchpoint. There is sufficient existing literature on evaluating virtual keyboards; however, only a few of them systematically summarized and took reflection on the evaluation methods and processes. Therefore, this protocol fills in the gap and presents a process and method of the systematic evaluation of keyboard design with available codes for analysis and visualization. It needs no additional or expensive equipment and is easy to conduct and operate. In addition, the protocol also helps to get potential reasons for the disadvantages of the design and enlightens the optimization of designs. In conclusion, this protocol with the open-source resources could not only be an in-class demonstrative experiment to inspire the novice to start their studies but also contributes to improving the user experience and the revenue of input method editor companies.
Assuntos
Desenho de Equipamento/métodos , Smartphone , Custos e Análise de Custo , Desenho de Equipamento/economia , TecnologiaAssuntos
Infecções por Coronavirus , Endoscopia Gastrointestinal , Desenho de Equipamento , Controle de Infecções/instrumentação , Transmissão de Doença Infecciosa do Paciente para o Profissional/prevenção & controle , Pandemias , Pneumonia Viral , Betacoronavirus/isolamento & purificação , COVID-19 , Infecções por Coronavirus/epidemiologia , Infecções por Coronavirus/prevenção & controle , Infecções por Coronavirus/transmissão , Endoscopia Gastrointestinal/efeitos adversos , Endoscopia Gastrointestinal/instrumentação , Endoscopia Gastrointestinal/métodos , Desenho de Equipamento/economia , Desenho de Equipamento/métodos , Gastroenteropatias/diagnóstico , Humanos , Controle de Infecções/métodos , Exposição Ocupacional , Pandemias/prevenção & controle , Pneumonia Viral/epidemiologia , Pneumonia Viral/prevenção & controle , Pneumonia Viral/transmissão , Dispositivos de Proteção Respiratória , SARS-CoV-2RESUMO
As the number of coronavirus 2019 disease (COVID-19) cases in the United States began mounting in the early weeks of March, health care workers raised the alarm about a looming shortage of ventilators to treat patients. On March 30, 2020, Ford Motor Company announced plans to produce 50,000 ventilators in 100 days [1], and General Motors followed suit on April 8, stating that it would deliver out 6,000 ventilators by the end of May and another 24,000 by August [2].
Assuntos
Betacoronavirus , Infecções por Coronavirus/terapia , Pneumonia Viral/terapia , Ventiladores Mecânicos/provisão & distribuição , Engenharia Biomédica , COVID-19 , Pressão Positiva Contínua nas Vias Aéreas/economia , Pressão Positiva Contínua nas Vias Aéreas/instrumentação , Infecções por Coronavirus/epidemiologia , Custos e Análise de Custo , Desenho de Equipamento/economia , Humanos , Pandemias , Pneumonia Viral/epidemiologia , Impressão Tridimensional/economia , SARS-CoV-2 , Estados Unidos/epidemiologia , United States Food and Drug Administration , Ventiladores Mecânicos/economiaRESUMO
Noise pollution reduction in the environment is a major challenge from a societal and health point of view. To implement strategies to improve sound environments, experts need information on existing noise. The first source of information is based on the elaboration of noise maps using software, but with limitations on the realism of the maps obtained, due to numerous calculation assumptions. The second is based on the use of measured data, in particular through professional measurement observatories, but in limited numbers for practical and financial reasons. More recently, numerous technical developments, such as the miniaturization of electronic components, the accessibility of low-cost computing processors and the improved performance of electric batteries, have opened up new prospects for the deployment of low-cost sensor networks for the assessment of sound environments. Over the past fifteen years, the literature has presented numerous experiments in this field, ranging from proof of concept to operational implementation. The purpose of this article is firstly to review the literature, and secondly, to identify the expected technical characteristics of the sensors to address the problem of noise pollution assessment. Lastly, the article will also put forward the challenges that are needed to respond to a massive deployment of low-cost noise sensors.
Assuntos
Monitoramento Ambiental/instrumentação , Monitoramento Ambiental/métodos , Ruído , Cidades , Monitoramento Ambiental/economia , Desenho de Equipamento/economia , Tecnologia sem Fio/instrumentaçãoRESUMO
OBJECTIVE: The development of new endovascular technologies and techniques for mechanical thrombectomy in stroke has greatly relied on benchtop simulators. This paper presents an affordable, versatile, and realistic benchtop simulation model for stroke. METHODS: A test bed for embolic occlusion of cerebrovascular arteries and mechanical thrombectomy was developed with 3D-printed and commercially available cerebrovascular phantoms, a customized hydraulic system to generate physiological flow rate and pressure, and 2 types of embolus analogs (elastic and fragment-prone) capable of causing embolic occlusions under physiological flow. RESULTS: The test bed was highly versatile and allowed realistic, radiation-free mechanical thrombectomy for stroke due to large-vessel occlusion with rapid exchange of geometries and phantom types. Of the transparent cerebrovascular phantoms tested, the 3D-printed phantom was the easiest to manufacture, the glass model offered the best visibility of the interaction between embolus and thrombectomy device, and the flexible model most accurately mimicked the endovascular system during device navigation. None of the phantoms modeled branches smaller than 1 mm or perforating arteries, and none underwent realistic deformation or luminal collapse from device manipulation or vacuum. The hydraulic system created physiological flow rate and pressure leading to iatrogenic embolization during thrombectomy in all phantoms. Embolus analogs with known fabrication technique, structure, and tensile strength were introduced and consistently occluded the middle cerebral artery bifurcation under physiological flow, and their interaction with the device was accurately visualized. CONCLUSIONS: The test bed presented in this study is a low-cost, comprehensive, realistic, and versatile platform that enabled high-quality analysis of embolus-device interaction in multiple cerebrovascular phantoms and embolus analogs.
Assuntos
Procedimentos Endovasculares/instrumentação , Desenho de Equipamento/métodos , Embolia Intracraniana/cirurgia , Pesquisa , Acidente Vascular Cerebral/cirurgia , Trombectomia/instrumentação , Trombectomia/métodos , Idoso , Circulação Cerebrovascular , Embolia/patologia , Embolia/cirurgia , Procedimentos Endovasculares/economia , Desenho de Equipamento/economia , Vidro , Humanos , Masculino , Pessoa de Meia-Idade , Modelos Anatômicos , Imagens de Fantasmas , Impressão Tridimensional , Silicones , Resistência à Tração , Resultado do TratamentoRESUMO
Electroporation is a basic yet powerful method for delivering small molecules (RNA, DNA, drugs) across cell membranes by application of an electrical field. It is used for many diverse applications, from genetically engineering cells to drug- and DNA-based vaccine delivery. Despite this broad utility, the high cost of electroporators can keep this approach out of reach for many budget-conscious laboratories. To address this need, we develop a simple, inexpensive, and handheld electroporator inspired by and derived from a common household piezoelectric stove lighter. The proposed "ElectroPen" device can cost as little as 23 cents (US dollars) to manufacture, is portable (weighs 13 g and requires no electricity), can be easily fabricated using 3D printing, and delivers repeatable exponentially decaying pulses of about 2,000 V in 5 ms. We provide a proof-of-concept demonstration by genetically transforming plasmids into Escherichia coli cells, showing transformation efficiency comparable to commercial devices, but at a fraction of the cost. We also demonstrate the potential for rapid dissemination of this approach, with multiple research groups across the globe validating the ease of construction and functionality of our device, supporting the potential for democratization of science through frugal tools. Thus, the simplicity, accessibility, and affordability of our device holds potential for making modern synthetic biology accessible in high school, community, and resource-poor laboratories.
Assuntos
Eletroporação/instrumentação , Técnicas de Transferência de Genes/instrumentação , Análise Custo-Benefício , Eletricidade , Eletroporação/economia , Desenho de Equipamento/economia , Escherichia coli , Técnicas de Transferência de Genes/economia , Humanos , Laboratórios/economia , Manufaturas/economia , Áreas de Pobreza , Impressão Tridimensional , Transformação Bacteriana , Meios de TransporteRESUMO
OBJECTIVE: to present a low-cost model for bleeding control training with the use of a tourniquet and the results of the training evaluation. METHOD: low-cost and easy-to-purchase materials, such as upholstery foam, ethylene-vinyl acetate (EVA) sheet, plastic propulsion pump, saline container, water, school paint, serum equipment, rubber tubing for tourniquet, and a leg and an arm of a ghost mannequin, were used. In the model assembly, we created an active bleeding simulation system, which could only be controlled with the correct application of the tourniquet. The model was submitted to professional and academic evaluation. RESULTS: the model was similar to human anatomy, proved to be practical in the bleeding control training with the use of a tourniquet, and had low cost. CONCLUSION: the model for bleeding control training had excellent acceptability, was considered viable for educational purposes of tourniquet use, and had low cost.
OBJETIVO: apresentar um modelo de baixo custo para treinamento de controle de sangramento com o uso de torniquete e os resultados da avaliação do treinamento. MÉTODO: foram utilizados materiais de fácil aquisição e de baixo custo, como espuma de estofado, placa de etileno-acetato de vinila (EVA), bomba plástica de propulsão, recipiente de soro fisiológico, água, tinta escolar, equipos de soro, tubo de látex para garrote e manequins comerciais de perna e de braço. Na montagem, foi criado um sistema de simulação de sangramento ativo que só podia ser controlado com aplicação correta do torniquete. O modelo foi submetido à avaliação de profissionais e acadêmicos. RESULTADOS: o modelo teve semelhança com a anatomia humana, mostrou-se prático no treinamento da contenção de sangramento com uso de torniquete e teve baixo custo financeiro. CONCLUSÃO: o modelo para treinamento de controle de sangramento teve excelente aceitabilidade, foi considerado viável para fins educacionais do uso de torniquete e teve baixo custo.