3D X-ray microscope acts as an accurate and effective equipment of pathological diagnosis in craniofacial imaging.

Craniofacial structure and dental hard tissue used to be researched on by traditional imaging tools such as light microscope, electron microscope and micro-CT. Due to the limitations of imaging principle, resolution and 3D rendering reconstruction technique, traditional imaging tools are constrained for presenting fine structure and precise measurements. Here a brand-new imaging equipment-3D X-ray microscope is introduced to realize a more efficient scanning by demonstrating the comparison of the craniofacial structures and dental hard tissue of diabetes and normal DBA mouse. To explore a higher resolution, more efficient imaging measurement and 3D reconstruction method on craniofacial structure and dental hard tissue. The study included 12 DBA mice which were divided into two groups (control group and diabetes group). The heads were separated and scanned by 3D X-ray microscope, after which regions of interest were selected, followed by measurement and 3D reconstruction based on microscope attached software Dragonfly pro©. Hemi-mandibles were collected for enamel mineral density assessment supported by QRM-MicroCT-HA phantom. Data was submitted to paired t-tests at a 95% confidence level. The automatic assessed enamel thickness of diabetes mice decreased on average, whereas the rest of manual measurements and automatic assessed density showed no statistical difference. We constructed HA phantom assisted enamel density procedure in Dragonfly software. Craniofacial structure and dental hard tissue were well-presented both in 2D slide and 3D reconstruction viewport by 3D X-ray microscope which can be routinely used as craniofacial structure and dental hard tissue imaging tool.

Evaluation of REFIX Technology on the Remineralization of Artificial Early Enamel Caries Lesion by Laser Speckle Tracking Analysis.

OBJECTIVE: To assess the effectiveness of the REFIX technology in the remineralization process of initial caries simulated on bovine enamel. The assessment involved the analysis of backscatter intensity, which was determined from laser speckle images. METHOD: Twenty-one bovine teeth were divided into three groups: G1 and G7 were submitted to treatment with the REFIX technology for 1 and 7 days, respectively. The control group was treated with deionized water. RESULTS: A significant difference in backscatter was found between the carious and sound areas in all groups (p = 0.0038, p < 0.0001, and p = 0.0002 for the control group, G1, and G7, respectively). The intergroup comparison revealed no significant difference among the groups studied. CONCLUSION: REFIX technology did not alter the optical properties of the samples of bovine teeth with simulated initial caries lesions after 1 and 7 days of treatment.

Effect of interproximal enamel reduction on interradicular bone volume in clear aligner therapy: a three-dimensional cone-beam computed tomography study.

OBJECTIVES: To assess the effect of inter-proximal enamel reduction (IPR) on interradicular bone volume and incisal inclination in patients undergoing clear aligner therapy (CAT). MATERIALS AND METHODS: The study sample consisted of 60 cases which underwent orthodontic CAT, in a private clinic in Dammam, KSA. A total of 120 CBCT scans (60 pre-treatment and 60 post- treatment) were measured using the CS 3D Imaging software to examine bone volume (using height, width, and depth of the interproximal area) and incisal inclination. The corresponding ClinCheck models were collected to determine the amount and locations of interproximal reduction performed. Little's Irregularity Index values were measured using OrthoCAD software. Paired sample t-test was used to address the measurements of bone height, width, depth, bone volume, and inclination of upper and lower incisors before and after IPR. RESULTS: IPR did not affect the upper or lower bone volume except at LR3-2 and UL 2 - 1 where a significant difference between the bone volume with and without IPR was detected (p = 0.02 and p = 0.04 respectively). Upper and lower incisor inclination showed a statistically significant decrease after IPR. There was no correlation between IPR and bone volume difference between upper and lower teeth except at LR3-2 and UL 2 - 1. CONCLUSIONS: IPR had no significant effect on inter-radicular bone volume except at areas of lower right canine-lateral and at areas of upper left central-lateral. There was a positive correlation between the amount of IPR and incisal inclination. CLINICAL RELEVANCE: The current study findings suggest that while IPR has a minimal and localized effect on bone volume in certain areas, it plays a role in adjusting incisal inclination, highlighting its significance in the careful planning of orthodontic treatment using clear aligners.

Clinical SWIR and CP-OCT imaging of interproximal lesions.

BACKGROUND: Enamel is highly transparent at short wavelength infrared imaging (SWIR) wavelengths allowing the detection of dental decay without the need for ionizing radiation. The purpose of this study was to use SWIR imaging methods including cross polarization optical coherence tomography (CP-OCT), occlusal transillumination (SWIR-OT), proximal transillumination (SWIR-PT), and occlusal reflectance (SWIR-R) to image interproximal lesions in vivo and compare the sensitivity with radiography. METHODS: Participants (n = 30) aged 18-80 each with a radiopositive interproximal lesion scheduled for restoration were enrolled in the study. Studies have shown that the opposing proximal surfaces across the contact will likely also have lesions. SWIR images were acquired of the adjoining teeth at each contact with an interproximal lesion scheduled for restoration. Lesion presence and depth were assessed on each side of the contact for radiography and each SWIR imaging method. Lesions on radiographs and in CP-OCT images were identified by a single examiner while lesions in SWIR images were identified by a contrast threshold via semi-automatic image segmentation. RESULTS: All SWIR imaging methods had significantly higher sensitivity (P < 0.05) than radiographs for the detection of interproximal lesions on the teeth opposite those restored. CP-OCT and SWIR-R imaging methods had significantly higher sensitivity than the other methods. SWIR imaging methods showed significantly higher lesion contrast than radiography. CONCLUSIONS: SWIR imaging methods can be used to detect interproximal lesions on posterior teeth with higher diagnostic performance than radiographs. CP-OCT appears well suited as a potential gold standard for the detection of interproximal lesions and assessment of their severity in vivo.

Radiographic evaluation of enamel thickness of permanent teeth: relevance and applicability.

OBJECTIVE: This descriptive observational study aimed to determine clinically relevant and applicable data of enamel thickness (ETH), considering the mesio-distal differences of anterior and posterior permanent teeth and their relationships. MATERIAL AND METHODS: The sample consisted of right-sided standardized radiographs of 34 individuals (21 females and 13 males), aged between 13 and 24 (average 16) years, with all permanent teeth intact and without crowding. Four periapical and four interproximal radiographs were obtained and digitized. ETH measurements (mesial to distal contact points at the dentin-enamel junction) were performed after correction for radiographic image magnification. The Students' t-test was applied to the differences between paired means, with the Pearson correlation to evaluate the correlation between them. RESULTS: The mesial and distal ETH increased from the anterior to the posterior teeth. Incisor ETH ranged between 0.60 and 0.84 mm. Canines, premolars, and molars were more than 1.0 mm thick, and molar enamel reached values between 1.26 and 1.44 mm. CONCLUSION: Distal ETH was significantly greater than the mesial ETH, and progressively thicker from the anterior to posterior teeth. Interproximal reduction (IPR) of the lower central and upper lateral incisors should be avoided, reduced, or performed on their distal surfaces. There is a positive and significant correlation between ETH and the mesial and distal surfaces of the teeth. Periapical radiographs and evaluation of the remaining ETH are necessary in cases of retreatment. The location and number of tooth size discrepancies should be considered in treatment planning and appropriately compensated with IPR.

External validation of an artificial intelligence-based method for the detection and classification of molar incisor hypomineralisation in dental photographs.

OBJECTIVES: This ex vivo diagnostic study aimed to externally validate an open-access artificial intelligence (AI)-based model for the detection, classification, localisation and segmentation of enamel/molar incisor hypomineralisation (EH/MIH). METHODS: An independent sample of web images showing teeth with (n = 277) and without (n = 178) EH/MIH was evaluated by a workgroup of dentists whose consensus served as the reference standard. Then, an AI-based model was used for the detection of EH/MIH, followed by automated classification and segmentation of the findings (test method). The accuracy (ACC), sensitivity (SE), specificity (SP) and area under the curve (AUC) were determined. Furthermore, the correctness of EH/MIH lesion localisation and segmentation was evaluated. RESULTS: An overall ACC of 94.3 % was achieved for image-based detection of EH/MIH. Cross-classification of the AI-based class prediction and the reference standard resulted in an agreement of 89.2 % for all diagnostic decisions (n = 594), with an ACC between 91.4 % and 97.8 %. The corresponding SE and SP values ranged from 81.7 % to 92.8 % and 91.9 % to 98.7 %, respectively. The AUC varied between 0.894 and 0.945. Image size had only a limited impact on diagnostic performance. The AI-based model correctly predicted EH/MIH localisation in 97.3 % of cases. For the detected lesions, segmentation was fully correct in 63.4 % of all cases and partially correct in 33.9 %. CONCLUSIONS: This study documented the promising diagnostic performance of an open-access AI tool in the detection and classification of EH/MIH in external images. CLINICAL SIGNIFICANCE: Externally validated AI-based diagnostic methods could facilitate the detection of EH/MIH lesions in dental photographs.

Reliability of impedance spectroscopy versus digital radiograph and ICDAS-II in occlusal caries detection: a prospective clinical trial.

The traditional methods in early caries detection had many limitations. So, this study aimed to evaluate the clinical performance of alternating current impedance spectroscopy ACIST in comparison with digital radiograph and ICDAS-II in detection of occlusal carious lesions. Occlusal surfaces of molar and premolar teeth from 40 adult participants were examined by two observers using three diagnostic methods: (1) international caries detection and assessment system (ICDAS-II) (2) digital radiograph (DR) and (3) Cariescan Pro device (ACIST). Agreement analysis and the difference in sensitivities and specificities were evaluated. The results showed an excellent agreement in the different groups. The difference from the visual tactile against ACIST scoring for enamel caries detection, was statistically significant (p = 0.012) and the agreement was moderate (k = 0.509). For dentinal caries the difference was not statistically significant (p > 0.05) and the agreement was similarly moderate (k < 0.6). The difference from the digital radiograph against ACIST scoring, for enamel caries, digital radiography had significantly higher sensitivity and specificity than ACIST (p < 0.001) while for dentinal caries detection and overall, ACIST had higher sensitivity and digital radiography had higher specificity and the difference was statistically significant (p < 0.001). Visual-tactile examination is a considered as feasible and valid technique for occlusal caries detection, digital radiography is superior to ACIST in diagnosing enamel caries, but it could underestimate the caries depth, ACIST is a reliable tool for detecting occlusal caries in dentin.

Clinical, Radiographic, and Histological Changes in Enamel and Dentin, According to Caries Care International™ Evaluation, In Permanent Posterior Teeth: An Observational Study / Cambios Clínicos, Radiográficos e Histológicos en Esmalte y Dentina, Según Evaluación de Caries Care International™, en Dientes Posteriores Permanentes: Un Estudio Observacional

SUMMARY: CariesCare International ™ practical guide is a tool for the comprehensive assessment and treatment of caries that synthesizes clinical and radiographic diagnosis and risk factors, classifying the severity, progression, and activity of lesions. The objective of this study was to analyze the validity and prediction characteristics of the proposed dental caries classification in the CariesCare International ™ practical guide as a reference through clinical and radiographic evaluation versus histological evaluation. Ninety-seven permanent posterior teeth were evaluated, and clinical and radiographic diagnoses were determined according to parameters defined in the CariesCare International™ guide as a reference. Subsequently, histological evaluation was performed to compare each stage of dental caries progression, and statistical analysis was applied. When comparing the validity and prediction values between radiographic and clinical diagnoses in relation to histological evaluation, a low sensitivity and high specificity relationship was found. The sensitivity and specificity percentages between the clinical and radiographic methods show that the clinical method has a lower number of false negatives. Histological changes in dental tissue were evident from the earliest stages of lesions, even in those not related to the caries process, indicating that the dentist should be careful when deciding on a treatment plan and take into account all variables involved in the caries process, as proposed by the CariesCare International ™ guide.

La guía práctica CariesCare International™ es una herramienta para la evaluación y tratamiento integral de la caries que sintetiza el diagnóstico clínico y radiográfico y los factores de riesgo, clasificando la gravedad, progresión y actividad de las lesiones. El objetivo de este estudio fue analizar la validez y características de predicción de la clasificación de caries dental propuesta en la guía práctica CariesCare International™ como referencia a través de la evaluación clínica y radiográfica versus la evaluación histológica. Se evaluaron noventa y siete dientes posteriores permanentes y se determinaron diagnósticos clínicos y radiográficos según parámetros definidos en la guía CariesCare International™ como referencia. Posteriormente se realizó una evaluación histológica para comparar cada etapa de progresión de la caries dental y se aplicó análisis estadístico. Al comparar los valores de validez y predicción entre los diagnósticos radiológicos y clínicos en relación con la evaluación histológica, se encontró una relación de baja sensibilidad y alta especificidad. Los porcentajes de sensibilidad y especificidad entre el método clínico y radiográfico muestran que el método clínico tiene un menor número de falsos negativos. Los cambios histológicos en el tejido dental fueron evidentes desde las primeras etapas de las lesiones, incluso en aquellas no relacionadas con el proceso de caries, lo que indica que el odontólogo debe tener cuidado al decidir un plan de tratamiento y tener en cuenta todas las variables involucradas en el proceso de caries, tal como propone la guía CariesCare International™.

Enamel Caries Lesion Depth Obtained by Optical Coherence Tomography and Transverse Microradiography: A Comparative Study.

INTRODUCTION: Visual imaging of subsurface caries lesions is of vital interest in dentistry, which can be obtained by invasive radiography technique as well as by available non-destructive imaging approaches. Thus, as a first step toward the development of a new innovative approach, Spectral-domain optical coherence tomography (SD-OCT) was applied to detect the lesion depth in comparison to the established reference technique (transverse microradiography [TMR]). METHODS: Bovine enamel specimens were demineralized for 5 days, following previous studies. For OCT, the resulting artificial lesions were scanned three-dimensionally (SD-OCT) and semi-automated measured (CarLQuant). For TMR, specimens were sectioned and the lesion depth was manually determined (Inspektor Research System). RESULTS: The range of lesion depth detected with OCT was 24.0-174.0 µm (mouth rinse study), 18.0-178.0 µm (toothpastes study) and with TMR 59.2-198.0 µm (mouth rinse study), 33.2-133.4 µm (toothpastes study). We found a strong correlation between both methods in terms of lesion depth (Spearman rankwith outlierp < 0.001, Rho = 0.75, Spearman rankwithout outlierp = 0.001, Rho = 0.79). The two methods produce similar results (Passing-Bablok regression, 1.16). As deeper is the lesion, the smallest is the difference between both methods as indicated by Bland-Altman-plots. CONCLUSION: Especially in the case of deep lesions, the values obtained by both methods are in agreement, and OCT can potentially substitute TMR to detect and assess lesion depth with the benefit of being non-destructive.

Technical note: Micro-computed tomography calibration using dental tissue for bone mineral research.

Computed tomography (CT) and microcomputed tomography (µCT) require calibration against density phantoms scanned with specimens or during routine internal calibration for assessment of mineral concentration (MC) and density. In clinical studies involving bone, alternative calibration methods using bodily tissues and fluids ("phantomless" calibration) have been suggested. However, such tissues are seldom available in archeological and osteological research. This study investigates the potential of dental tissue as internal reference for calibration of µCT scans, facilitating the analysis of bone MC. We analyzed 70 molars from 24 extant primate species, including eight human teeth, each scanned with density phantoms for calibration. Our findings indicate that sampling specific regions of molars (lateral aspects of the mesial cusps) yields low variation in enamel and dentine MC values, averaging 1.27 g/cm3 (±0.03) for dentine and 2.25 g/cm3 (±0.03) for enamel. No significant differences were observed across molar types or among scanning procedures, including scanner model, resolution, and filters. An ad hoc test on 12 mandibles revealed low variance in MC between the conventional phantom and dental tissue calibration methods; all 36 measurements (low, medium, and high MC for each mandible) were within 0.05 g/cm3 of each other -81% were within 0.03 g/cm3 and 94% within 0.04 g/cm3. Based on these results, we propose a new "phantomless" calibration technique using these mean enamel and dentine MC values. The presented phantomless calibration method could aid in the assessment of bone pathology and enhance the scope of studies investigating bone structure and physical property variations in archeological, osteological, and laboratory-based research.

Conquering class imbalances in deep learning-based segmentation of dental radiographs with different loss functions.

OBJECTIVE: The imbalanced nature of real-world datasets is an ongoing challenge in the field of machine and deep learning. In medicine and in dentistry, most data samples represent patients not affected by pathologies, and on imagery, pathologic image areas are often smaller than healthy ones. Selecting suitable loss functions during deep learning is essential and may help to overcome the resulting imbalance. We assessed six different loss functions for one exemplary task, tooth structure segmentation on bitewing radiographs, for their performance. METHODS: Six different loss functions (Focal Loss, Dice Loss, Tversky Loss and hybrid losses of Cross-Entropy and Dice Loss, Focal and Dice Loss, Focal and Generalized Dice Loss) were compared on a tooth structure segmentation task of 1,625 bitewing radiographs. Training was performed using three different model architectures (U-Net, Linknet, DeepLavbV3+) over a 5-fold cross-validation. Tooth structures consisted of the classes (occurrence in% of samples/captures areas measured on pixel level) enamel (100 %/25 %), dentin (100 %/50 %), root canal (100 %/10 %), filling (81 %/8 %) and crown (28 %/5 %). RESULTS: Hybrid loss functions significantly outperformed standalone ones and provided robust results over the different architectures for the classes enamel, dentin, root canal and filling. Specifically, the Dice Focal loss reached high performance to conquer both image level and pixel level class imbalance, respectively. CLINICAL SIGNIFICANCE: In dental use cases it is often important to predict minority classes such as pathologies accurately. Using specific loss function may be an effective strategy to overcome data imbalance when training deep learning models.

Machine learning assisted 5-part tooth segmentation method for CBCT-based dental age estimation in adults.

BACKGROUND: The utilization of segmentation method using volumetric data in adults dental age estimation (DAE) from cone-beam computed tomography (CBCT) was further expanded by using current 5-Part Tooth Segmentation (SG) method. Additionally, supervised machine learning modelling -namely support vector regression (SVR) with linear and polynomial kernel, and regression tree - was tested and compared with the multiple linear regression model. MATERIAL AND METHODS: CBCT scans from 99 patients aged between 20 to 59.99 was collected. Eighty eligible teeth including maxillary canine, lateral incisor, and central incisor were used in this study. Enamel to dentine volume ratio, pulp to dentine volume ratio, lower tooth volume ratio, and sex was utilized as independent variable to predict chronological age. RESULTS: No multicollinearity was detected in the models. The best performing model comes from maxillary lateral incisor using SVR with polynomial kernel ( = 0.73). The lowest error rate achieved by the model was given also by maxillary lateral incisor, with 4.86 years of mean average error and 6.05 years of root means squared error. However, demands a complex approach to segment the enamel volume in the crown section and a lengthier labour time of 45 minutes per tooth.

High throughput automated characterization of enamel microstructure using synchrotron tomography and optical flow imaging.

The remarkable damage-tolerance of enamel has been attributed to its hierarchical microstructure and the organized bands of decussated rods. A thorough characterization of the microscale rod evolution within the enamel is needed to elucidate this complex structure. While prior efforts in this area have made use of single particle tracking to track a single rod evolution to various degrees of success, such a process can be both computationally and labor intensive, limited to the evolution path of a single rod, and is therefore prone to error from potentially tracking outliers. Particle image velocimetry (PIV) is a well-established algorithm to derive field information from image sequences for processes that are time-dependent, such as fluid flows and structural deformation. In this work, we demonstrate the use of PIV in extracting the full-field microstructural distribution of rods within the enamel. Enamel samples from a wild African lion were analyzed using high-energy synchrotron X-ray micro-tomography. Results from the PIV analysis provide sufficient full-field information to reconstruct the growth of individual rods that can potentially enable rapid analysis of complex microstructures from high resolution synchrotron datasets. Such information can serve as a template for designing damage-tolerant bioinspired structures for advanced manufacturing. STATEMENT OF SIGNIFICANCE: Thorough characterization and analysis of biological microstructures (viz. dental enamel) allows us to understand the basis of their excellent mechanical properties. Prior efforts have successfully replicated these microstructures via single particle tracking, but the process is computationally and labor intensive. In this work, optical flow imaging algorithms were used to extract full-field microstructural distribution of enamel rods from synchrotron X-ray computed tomography datasets, and a field method was used to reconstruct the growth of individual rods. Such high throughput information allows for the rapid production/prototyping and advanced manufacturing of damage-tolerant bioinspired structures for specific engineering applications. Furthermore, the algorithms used herein are freely available and open source to broaden the availability of the proposed workflow to the general scientific community.

Progression of proximal caries in primary molars using the radiographic ICDAS: a retrospective cohort study.

PURPOSE: To evaluate the proximal caries progression in primary molars using the radiographic International Caries Detection and Assessment System (ICDAS). METHODS: A study was conducted on 196 children aged 3-9 years old who underwent the clinical examination and bitewing radiography during baseline and 6-month (and over) follow-up visits. The primary molars bitewing radiographs with initial enamel caries (RA1 and RA2) or outer dentine caries (RA3) of proximal surfaces were included. Caries advancement was scored using ICDAS criteria and statistical analyses with the chi-square test. Median survival time was evaluated using Kaplan-Meier survival curves and log-rank tests. RESULTS: A total of 439 surfaces of primary molars were included in this study and an averaged follow-up period of enamel and dentine caries group were 18.3 ± 9.6 months and 16.5 ± 9.5 months respectively. The progression of proximal enamel lesions significantly differed between primary maxillary and mandibular molars (p = 0.002) and among each patient's primary mandibular second molar and the others (p = 0.002). On the contrary, the outer dentine caries of each group of primary molars was not different. The median survival time of the initial enamel proximal caries (23.30 months) was non-significantly longer than that of the dentine (20.80 months). CONCLUSIONS: Progressions of the initial enamel proximal caries were significantly different among primary molars at the average 18.3-month follow-up. The median survival period of the enamel proximal caries was more extended than that of dentine but without statistical difference. These results provide essential information for dentists regarding an appropriate appointment for bitewing examinations.

Characterizing the microstructures of mammalian enamel by synchrotron phase contrast microCT.

The enamel of mammalian teeth is a highly mineralized tissue that must endure a lifetime of cyclic contact and is inspiring the development of next-generation engineering materials. Attempts to implement enamel-inspired structures in synthetic materials have had limited success, largely due to the absence of a detailed understanding of its microstructure. The present work used synchrotron phase-contrast microCT imaging to evaluate the three-dimensional microstructure of enamel from four mammals including Lion, Gray Wolf, Snow Leopard, and Black Bear. Quantitative results of image analysis revealed that the decussation pattern of enamel consists of discrete diazone (D) and parazone (P) bands of rods organized with stacking arrangement of D+/P/D-/P in all mammals evaluated; the D+ and D- refer to distinct diazone bands with juxtaposed rod orientations from the reference plane. Furthermore, the rod orientations in the bands can be described in terms of two principal angles, defined here as the pitch and yaw. While the pitch angle increases from the outer enamel to a maximum (up to ≈ 40°) near the dentin enamel junction, minimal spatial variations are observed in yaw across the enamel thickness. There are clear differences in the decussation parameters of enamel across species that are interpreted here with respect to the structural demands placed on their teeth. The rod pitch and band width of enamel are identified as important design parameters and appear to be correlated with the bite force quotient of the four mammals evaluated. STATEMENT OF SIGNIFICANCE: The multi-functionality of tooth enamel requires both hardness and resistance to fracture, properties that are generally mutually exclusive. Ubiquitous to all mammalian teeth, the enamel is expected to have undergone adaptations in microstructure to accommodate the differences in diet, body size and bite force across animals. For the first time, we compare the complex three-dimensional microstructure of enamel from teeth of multiple mammalian species using synchrotron micro-computed tomography. The findings provide new understanding of the "design" of mammalian enamel microstructures, as well as how specific parameters associated with the decussation of rods appear to be engineered to modulate its fracture resistance.

Optical coherence tomography and gray scale digital analysis as noninvasive techniques for evaluating molar-incisor hypomineralization severity: A comparative study with microcomputed tomography.

Molar-incisor hypomineralization (MIH) is a qualitative defect of dental enamel characterized by demarcated opacities present in permanent first molars and other teeth. It is considered a major clinical challenge in dentistry because it makes affected teeth more susceptible to fractures and dental caries. Its diagnosis is mainly clinical and there are few technological resources that allow for a more accurate diagnosis, especially with respect to the depth of the defect in the dental enamel. In this context, optical coherence tomography (OCT), which is routinely used in ophthalmology, can produce images of the depth of the dental enamel, making it a promising method. In this study, 33 teeth with different MIH severities were evaluated using OCT and microcomputed tomography (microCT). Semi-quantitative methods of grayscale pattern analysis were used to compare images obtained from different severities of MIH with the mineral density obtained through microCT. MicroCT evaluation revealed that hypomineralized enamel had a significantly lower mineral density than intact enamel. However, this difference was not observed between the mild and severe MIH lesions. In the OCT evaluation, significant differences were observed between the intact and hypomineralized enamel, and the gray value comparison provided a method for quantitative differentiation between the two. This study suggests that OCT could be a useful adjunct to traditional diagnostic methods for MIH, offering a noninvasive approach to evaluate enamel defects. RESEARCH HIGHLIGHTS: Combining optical coherence tomography with grayscale digital analysis shows potential as a promising method for diagnosing molar-incisor hypomineralization and assessing its level of severity.

Effect of composite radiopacity and margin location of the restoration on the diagnosis of secondary caries.

This research aimed to evaluate the effect of the radiopacity of a Bulk-Fill composite (X-TraFil, VOCO, Germany) and a Conventional composite (P60, 3M ESPE, USA) and assessment of the margin location in the enamel and dentin on the diagnosis of secondary caries. 76 intact premolars with MOD preparation were divided into two equal groups and filled with the conventional and bulk-fill composite. Four regions were considered to simulate carious lesions (two regions in enamel and two regions in dentin). In each group, half of the regions in the dentin and half in the enamel were randomly selected for secondary caries simulation and filled with a wax-plaster combination while the remaining regions stayed intact. Bitewing imaging was done using the PSP digital sensor. Five examiners reviewed the images, and lesions were recorded. Caries diagnosis indicators and paired-sample t-test were used for statistical analysis. The reproducibility and accuracy of the examiners' responses were evaluated using the kappa and agreement coefficient (α=0.05). The sensitivity, specificity, and accuracy of diagnosing secondary carious lesions in enamel were significantly better under conventional than bulk-fill composite. Similarly, the sensitivity and accuracy of diagnosing secondary caries in dentin were significantly higher under conventional composite than bulk-fill composite (p<0.05). No significant differences were found in the agreement and kappa coefficient between conventional and bulk-fill composites in the enamel and dentin (p>0.05). The diagnostic accuracy of carious lesions was higher under conventional composite than bulk-fill composite. However, the location of the secondary was ineffective in caries diagnosis.

Use of micro-computed tomography and scanning electron microscopy with energy-dispersive spectroscopy to distinguish natural white spot enamel lesions from sound enamel in human premolars.

PURPOSE: The aim of the present study was to develop a novel method for distinguishing white spot lesions (WSLs) from sound enamel in human premolars using micro-computed tomography (micro-CT) and scanning electron microscopy (SEM) with energy-dispersive spectroscopy (EDS), and to examine differences in surface morphology, chemical composition, and mineral density (MD) between these two areas. METHODS: Fourteen premolars with natural WSLs on the enamel surface of the crowns were examined. After sectioning the teeth, each specimen containing WSLs adjacent to intact enamel was examined for MD, surface morphology, and atomic percentages (At%) of chemical components using micro-CT and SEM/EDS, respectively. Differences between these areas of the same specimen were analyzed statistically using paired t-test. RESULTS: SEM images highlighted increased roughness and irregularity in the lesion area. EDS analysis revealed significant reductions in calcium (Ca), phosphorus (P), fluorine (F), chlorine (Cl), and sodium (Na) levels at the lesion surface in comparison to intact enamel (P < 0.05). The decreases in the MD of the lesions were statistically significant in comparison to sound enamel (P < 0.05). CONCLUSION: These findings provide standard measurements for evaluating the essential characteristics of WSLs and intact enamel, being vital for assessment of treatment outcomes and development of innovative biomaterials for management of hypo-mineralized enamel lesions.

Variation in enamel prism size in primate molars.

OBJECTIVE: This study examines whether larger enamel prism diameters accommodate a greater enamel volume from the enamel-dentine junction (EDJ) to the outer-enamel surface (OES) in primate molars, and how prism size relates to enamel thickness and crown location. DESIGN: We assessed variation in enamel prism diameter in relation to crown location and enamel thickness in catarrhine lower molars (n = 14 species) and one platyrrhine. Prism diameter and enamel thickness were recorded in four locations (lingual lateral; lingual cuspal; buccal cuspal; buccal lateral), using a buccal-lingual section through the centre of the mesial cusps. Ten prism diameter readings were collected at inner (near the EDJ), outer (near the OES) and middle (between the two locations) enamel for each location. RESULTS: Mean prism diameter values for each species were similar (range: 4.06 µm to 5.81 µm). Prism diameter enlarged from inner to outer enamel, suggesting larger prisms help accommodate the increase in enamel volume from the EDJ to the OES. Average prism diameter does not associate with enamel thickness. Instead, cuspal positions had significantly smaller prism diameter at the EDJ than lateral positions, and larger prism sizes at the OES, leading to an overall similar prism diameter mean for all positions (Lingual lateral: 5.11 µm; Lingual cuspal: 5.04 µm; Buccal cuspal: 4.78 µm; Buccal lateral: 4.99 µm). CONCLUSIONS: Our study revealed consistent average enamel prism diameters in various crown locations of lower primate molars, potentially contributing to the mechanical integrity and functional optimization of enamel in primates.

Evaluation of Dental Enamel Thickness in Maxillary Teeth of Alouatta guariba clamitans, Alouatta caraya, and Sapajus nigritus by Cone Beam Computed Tomography.

Tooth enamel thickness is widely studied in primates and is important in differentiating taxa and in interpreting diet and feeding behavior. The objective of this study was to measure enamel thickness and discuss whether the results can be associated with different feeding patterns. Thirty-four syncraniums of Alouatta guariba clamitans, Alouatta caraya, and Sapajus nigritus were subjected to cone beam computed tomographic (CBCT) scans, and the dental enamel was measured in different regions of the crown using the multiplanar reconstruction tool. The differences observed indicate that for many variables and teeth, A. guariba clamitans showed significantly higher values compared to the other 2 species, with the exception of the cuspid region. Although the A. guariba clamitans is a folivorous species, it showed thicker enamel for most of the variables. CBCT was efficient in performing the measurements, allowing analysis of the syncraniums.