Assessing Polymorphic Purity of Rifampicin in Double and Triple-Drug Fixed-Dose Combination Products.

First-line tuberculostatic agents, Rifampicin (RIF), Isoniazid (ISH), Ethambutol (ETB), and Pyrazinamide (PZA) are generally administered as a fixed-dose combination (FDC) for improving patient adherence. The major quality challenge of these FDC products is their variable bioavailability, where RIF and its solid state are key factors. In this work, the analysis of the impact of the polymorphism in the performance of RIF in RIF-ISH and PZA-RIF-ISH combined products was carried out by an overall approach that included the development and validation of two methodologies combining near-infrared (NIR) spectroscopy and partial least squares (PLS) to the further evaluation of commercial products. For NIR-PLS methods, training and validation sets were prepared with mixtures of Form I/Form II of RIF, and the appropriate amount of ISH (for double associations) or ISH-PZA (for triple associations). The corresponding matrix of the excipients was added to the mixture of APIs to simulate the environment of each FDC product. Four PLS factors, reduced spectral range, and the combination of standard normal variate and Savitzky-Golay 1st derivative (SNV-D') were selected as optimum data pre-treatment for both methods, yielding satisfactory recoveries during the analysis of validation sets (98.5±2.0%, and 98.7±1.8% for double- and triple-FDC products, respectively). The NIR-PLS model for RIF-ISH successfully estimated the polymorphic purity of Form II in double-FDC capsules (1.02 ± 0.02w/w). On the other hand, the NIR-PLS model for RIF-ISH-PZA detected a low purity of Form II in triple FDC tablets (0.800 ± 0.021w/w), these results were confirmed by X-ray powder diffraction. Nevertheless, the triple-FDC tablets showed good performance in the dissolution test (Q=99-102%), implying a Form II purity about of 80% is not low enough to affect the safety and efficacy of the product.

Insights into therapeutic liquid mixtures and formulations towards tuberculosis therapy.

Therapeutic liquid mixtures, as deep eutectic systems, are considered a sustainable strategy that can be useful for the modification and enhancement of the pharmacokinetics and pharmacodynamics of different active ingredients. In this study, we assessed the stability and antibacterial activity of therapeutic liquid formulations prepared with anti-tuberculosis drugs. Tuberculosis therapy presents various pitfalls related, for example, to the administration of prolonged regimens of multiple drugs, different severe adverse effects, low compliance of the patient to treatment and the development of drug resistance. During this study, it was possible to assess the physicochemical stability of the formulations for 6 months, by polarized optical microscopy, 1H NMR and FTIR-ATR. Furthermore, the mixtures present an antibacterial effect against a drug-susceptible Mycobacterium tuberculosis strain (H37Rv). This was particularly evident for the mixtures with ethambutol incorporated, making them interesting to pursue with further studies and evaluation of clinical applicability. Upon infection, it was also observed that a single and higher dose appears to be more effective than lower separate doses, which could allow the production of patient-friendly formulations.

Development and Optimization of a New UPLC-UV/MS Method through DoE and MLR for Detecting Substandard Drug Products to Treat Tuberculosis.

Drug products used for treating tuberculosis are one of the most widely reported medicines to be classified as falsified or substandard in low- and middle-income countries, representing a major hazard to health. The aim of this study was, firstly, to develop an ultra-performance liquid chromatography (UPLC) method which is able to analyze fixed combination tablets with up to four active pharmaceutical ingredients, including isoniazid, pyrazinamide, rifampicin, and ethambutol. Secondly, we aimed to optimize it through the design of experiments and multi-linear regression based on a central composite design and to validate it according to the guidelines of the International Conference on Harmonization. The application of this tools enabled the identification of the influential factors (flow rate, formic acid, and temperature) and their effects on the studied responses (retention factor and percentage for each drug) as part of the quality by design approach. The method proved to be to be linear in the range from 5.0 to 15 µg/mL for isoniazid, pyrazinamide, and rifampicin, being precise (<1%) and accurate (97−101%). In addition, the method validated for ethambutol proved to be linear from 1.4 to 4.2 µg/mL, as well as precise (0.54%) and accurate (97.3%). The method was stability indicated for all the active pharmaceutical ingredients studied and was able to detect two substandard formulations sampled on the African market.

Tuberculosis drug discovery: Progression and future interventions in the wake of emerging resistance.

The emergence of drug resistance continues to afflict TB control where drug resistant strains have become a global health concern. Contrary to drug-sensitive TB, the treatment of MDR/XDR-TB is more complicated requiring the administration of second-line drugs that are inefficient than the first line drugs and are associated with greater side effects. The emergence of drug resistant Mtb strains had coincided with an innovation void in the field of drug discovery of anti-mycobacterials. However, the approval of bedaquiline and delamanid recently for use in MDR/XDR-TB has given an impetus to the TB drug discovery. The review discusses the drug discovery efforts in the field of tuberculosis with a focus on the strategies adopted and challenges confronted by TB research community. Here, we discuss the diverse clinical candidates in the current TB drug discovery pipeline. There is an urgent need to combat the current TB menace through multidisciplinary approaches and strategies making use of the recent advances in understanding the molecular biology and pathogenesis of Mtb. The review highlights the recent advances in drug discovery, with the host directed therapeutics and nanoparticles-drug delivery coming up as important tools to fight tuberculosis in the future.

The Role of Alcohol Dehydrogenase in Drug Metabolism: Beyond Ethanol Oxidation.

Alcohol dehydrogenases (ADHs) are most known for their roles in oxidation and elimination of ethanol. Although less known, ADHs also play a critical role in the metabolism of a number of drugs and metabolites that contain alcohol functional groups, such as abacavir (HIV/AIDS), hydroxyzine (antihistamine), and ethambutol (antituberculosis). ADHs consist of 7 gene family numbers and several genetic polymorphic forms. ADHs are cytosolic enzymes that are most abundantly found in the liver, although also present in other tissues including gastrointestinal tract and adipose. Marked species differences exist for ADHs including genes, proteins, enzymatic activity, and tissue distribution. The active site of ADHs is relatively small and cylindrical in shape. This results in somewhat narrow substrate specificity. Secondary alcohols are generally poor substrates for ADHs. In vitro-in vivo correlations for ADHs have not been established, partly due to insufficient clinical data. Fomepizole (4-methylpyrazole) is a nonspecific ADH inhibitor currently being used as an antidote for the treatment of methanol and ethylene glycol poisoning. Fomepizole also has the potential to treat intoxication of other substances of abuse by inhibiting ADHs to prevent formation of toxic metabolites. ADHs are inducible through farnesoid X receptor (FXR) and other transcription factors. Drug-drug interactions have been observed in the clinic for ADHs between ethanol and therapeutic drugs, and between fomepizole and ADH substrates. Future research in this area will provide additional insights about this class of complex, yet fascinating enzymes.

Stability of Azathioprine, Clonidine Hydrochloride, Clopidogrel Bisulfate, Ethambutol Hydrochloride, Griseofulvin, Hydralazine Hydrochloride, Nitrofurantoin, and Thioguanine Oral Suspensions Compounded with SyrSpend SF pH4.

To allow for tailored dosing and overcome swallowing difficulties, compounded liquid medication is often required in pediatric patients. The objective of this study was to evaluate the stability of oral suspensions compounded with SyrSpend SF PH4 and the commonly used active pharmaceutical ingredients azathioprine (powder) 50 mg/mL, azathioprine (from tablets) 50 mg/mL, clonidine hydrochloride (powder) 0.1 mg/mL, clopidogrel bisulfate (from tablets) 5 mg/mL, ethambutol hydrochloride (powder) 50 mg/mL, ethambutol hydrochloride (from tablets) 50 mg/mL, ethambutol hydrochloride (powder) 100 mg/mL, griseofulvin (powder) 25 mg/mL, hydralazine hydrochloride (powder) 4 mg/mL, nitrofurantoin (powder) 10 mg/mL, and thioguanine (powder) 2.5 mg/mL. Suspensions were compounded at the concentrations listed above and stored at controlled room and refrigerated temperatures. Stability was assessed by measuring the percentage recovery at 0 day (baseline), and at 7 days, 14 days, 30 days, 60 days, and 90 days. Active pharmaceutical ingredients quantification was performed by high-performance liquid chromatography, via a stability-indicating method. The following oral suspensions compounded using SyrSpend SF PH4 as the vehicle showed a beyond-use date of 90 days when stored both at room or refrigerated temperatures: clonidine hydrochloride 0.1 mg/mL, ethambutol hydrochloride 50 mg/mL and 100 mg/mL, griseofulvin 25 mg/mL, nitrofurantoin 10 mg/mL, and thioguanine 2.5 mg/mL, all compounded from the active pharmaceutical ingredients in powder form. Suspensions compounded using the active pharmaceutical ingredients from tablets presented a lower beyond-use date: 30 days for ethambutol hydrochloride 50 mg/mL and hydralazine hydrochloride 4 mg/mL, stored at both temperatures, and for clopidogrel bisulfate 5 mg/mL when stored only at refrigerated temperature. Azathioprine suspensions showed a beyond-use date of 14 days when compounded using active pharmaceutical ingredients in powder form at both temperatures. This suggests that SyrSpend SF PH4 is suitable for compounding active pharmaceutical ingredients from different pharmacological classes.

Structures of cell wall arabinosyltransferases with the anti-tuberculosis drug ethambutol.

The arabinosyltransferases EmbA, EmbB, and EmbC are involved in Mycobacterium tuberculosis cell wall synthesis and are recognized as targets for the anti-tuberculosis drug ethambutol. In this study, we determined cryo-electron microscopy and x-ray crystal structures of mycobacterial EmbA-EmbB and EmbC-EmbC complexes in the presence of their glycosyl donor and acceptor substrates and with ethambutol. These structures show how the donor and acceptor substrates bind in the active site and how ethambutol inhibits arabinosyltransferases by binding to the same site as both substrates in EmbB and EmbC. Most drug-resistant mutations are located near the ethambutol binding site. Collectively, our work provides a structural basis for understanding the biochemical function and inhibition of arabinosyltransferases and the development of new anti-tuberculosis agents.

Improved processability of ethambutol hydrochloride by spherical agglomeration.

Ethambutol hydrochloride (ETB), high dose anti-tubercular drug exhibits poor micromeritics and compressibility. The current study aimed to enhance flow, compressibility and packing characteristics, thereby improving processability of ETB by spherical agglomeration. Quasi emulsion solvent diffusion method was used for agglomeration process in which saturated aqueous ETB solution was prepared and the crystallization was carried out subsequently at different ratios of acetone and ethyl acetate which act as anti-solvent. Further the process was optimised statistically using 32 factorial design keeping 'speed of stirring' and 'ratio acetone and ethyl acetate' as independent variables and particle size as dependent variable. Optimised batch of ethambutol hydrochloride spherical agglomerates (ETB-SA) was characterised for sieve analysis, solid state characteristics and Kawakita analysis. The uniformity of ETB-SA was observed with SEM while XRPD studies revealed reduction in crystallinity for ETB-SA. DSC and FTIR indicated no polymeric or chemical alteration during crystallization process. The flow properties of ETB-SA were found superior and its Kawakita parameters indicated improved packability and flowability compared to ETB. ETB has high solubility in water therefore was no significant difference was observed in in vitro dissolution of ETB and ETB-SA. Thus spherical agglomeration, a revered particle engineering technique, continues to be a salient approach for enhancing processability of high-dose drugs like ETB.

Compatibility Between Four Anti-TB Drugs and Tablet Excipients Determined By Microcalorimetry.

Previous isothermal microcalorimetry studies at 40 °C, with and without humidity (RH 75%), had shown no incompatibility between rifampicin (RIF), isoniazid (INH), pyrazinamide (PZA) and ethambutol HCl (EMB). The purpose of this study was to explore any interactions at an increased temperature of 50 °C and also to investigate the possibility of incompatibilities between the drugs and tablet excipients used in the most commonly prescribed commercial four-drug TB FDC. No incompatibilities were observed between the excipients, or when the excipients were tested with the four drugs individually. Incompatibility was observed with the four drugs combined.

Ethambutol-Loaded Solid Lipid Nanoparticles as Dry Powder Inhalable Formulation for Tuberculosis Therapy.

Ethambutol hydrocloride (EMB) is an anti-tuberculosis drug, which is commonly used as a protection agent against of unrecognized resistance to other drugs employed to treat this disease. Since oral form of EMB has some side effects and cellular toxicity, direct administration of EMB into lungs seems to be an attractive and reasonable option in order to overcome these side effects. Our main goal in this study was assessment of pulmonary administration through dry powder inhaler (DPI) using EMB-loaded solid lipid nanoparticles (SLNs). We prepared EMB-loaded SLNs using two techniques (hot homogenization and ultrasonication). DPI formulations were made by spray drying of EMB-loaded SLNs with and without mannitol. For investigation of flowbility of the prepared powders, Carr's index and Hausner ratio, and for in vitro deposition of the powders, Next Generation Impactor (NGI) analysis were used. The encapsulation efficiency and particle size of obtained particles were higher than 98% and sub-100 nm, respectively. Toxicity investigation of EMB-loaded SLNs via MTT assay showed biocompatibility and non-toxicity of the SLNs. Results of flowability and aerodynamic traits assessment of EMB-loaded SLN DPI powder confirmed the suitability of prepared powders. Overall, the attained results showed that EMB-loaded SLN DPI has high potential for direct treatment of tuberculosis.

Continuous-flow protocol for the synthesis of enantiomerically pure intermediates of anti epilepsy and anti tuberculosis active pharmaceutical ingredients.

Continuous-flow production of chiral intermediates plays an important role in the development of building blocks for Active Pharmaceutical Ingredients (APIs), being α-amino acids and their derivatives widely applied as building blocks. In this work we developed two different strategies for the synthesis of intermediates used on the synthesis of levetiracetam/brivaracetam and ethambutol. The results obtained show that methionine methyl ester can be continuously converted to the desired ethambutol intermediate by RANEY® Nickel dessulfurization/reduction strategy whereas levetiracetam/brivaracetam intermediates could be synthesized by both RANEY® Nickel (without H2) and Pd/C-H2 approach or by photochemical desulfurization.

Development and biological evaluation of a new nanotheranostic for tuberculosis.

In this study, we developed, characterized, and tested in vivo polymeric nanoparticle of ethambutol labeled with 99mTc as nanoradiopharmaceutical for early diagnosis of tuberculosis by single-photon emission computed tomography, also as a therapeutic choice. Nanoparticles were developed by double emulsification. All characterization tests were performed, as scanning electron microscopy and dynamic light scattering. The labeling process with 99mTc was performed using the direct labeling process. In vitro and in vivo assays were performed with animals and cells. The results showed that a spherical ethambutol nanoparticle with a size range of 280-300 nm was obtained. The stability test showed that the nanoparticles were well labeled with 99mTc (> 99.1%) and keep labeled over 24 h. The biodistribution assay showed that almost 18% of the nanoparticles were uptake by the lung in infected mice (male C57Bl/6) with Mycobacterium bovis BCG (4 × 105 CFU/cavity), corroborating its use as a nanodrug for tuberculosis imaging. The results for the cell assay corroborate its therapeutical effect. We developed and efficiently tested a new nanodrug that can be used for both imaging and therapy of tuberculosis, acting as a novel nanotheranostic.

Properties of Therapeutic Deep Eutectic Solvents of l-Arginine and Ethambutol for Tuberculosis Treatment.

The treatment for tuberculosis infection usually involves a prolonged regimen of multiple antibacterial drugs, which might lead to various secondary effects. For preventing drug resistance and side-effects of anti-tuberculosis drugs, new methods for improving the bioavailability of APIs were investigated. The strategy proposed consists of the preparation of therapeutic deep eutectic solvents (THEDES), that incorporate l-arginine and ethambutol. The eutectic mixtures were prepared by mixing the components at a certain molar ratio, until a clear liquid solution was formed. The prepared mixtures were characterized by differential scanning calorimetry (DSC), polarized optical microscopy (POM) and nuclear magnetic resonance spectroscopy (¹H and 13C-NMR). The solubility and permeability of the drugs when they are in the THEDES form was evaluated at 37 °C, in phosphate buffered saline (PBS). Solubility studies showed an increase of the solubility of ethambutol when incorporated in the eutectic system. The cytotoxicity was evaluated using a model cell line (Caco-2), comparing the cytotoxicity of the API incorporated in the eutectic system. We observed that the cell viability in the THEDES was affected by the presence of citric acid, and higher cytotoxicity values were observed. Nonetheless, these findings do not compromise the possibility to use these systems as new delivery systems for ethambutol and arginine.

Dibasic Derivatives of Phenylcarbamic Acid against Mycobacterial Strains: Old Drugs and New Tricks?

In order to provide a more detailed view on the structure⁻antimycobacterial activity relationship (SAR) of phenylcarbamic acid derivatives containing two centers of protonation, 1-[2-[({[2-/3-(alkoxy)phenyl]amino}carbonyl)oxy]-3-(dipropylammonio)propyl]pyrrolidinium oxalates (1a⁻d)/dichlorides (1e⁻h) as well as 1-[2-[({[2-/3-(alkoxy)phenyl]amino}carbonyl)oxy]-3-(di-propylammonio)propyl]azepanium oxalates (1i⁻l)/dichlorides (1m⁻p; alkoxy = butoxy to heptyloxy) were physicochemically characterized by estimation of their surface tension (γ; Traube's stalagmometric method), electronic features (log ε; UV/Vis spectrophotometry) and lipophilic properties (log kw; isocratic RP-HPLC) as well. The experimental log kw dataset was studied together with computational logarithms of partition coefficients (log P) generated by various methods based mainly on atomic or combined atomic and fragmental principles. Similarities and differences between the experimental and in silico lipophilicity descriptors were analyzed by unscaled principal component analysis (PCA). The in vitro activity of compounds 1a⁻p was inspected against Mycobacterium tuberculosis CNCTC My 331/88 (identical with H37Rv and ATCC 2794, respectively), M. tuberculosis H37Ra ATCC 25177, M. kansasii CNCTC My 235/80 (identical with ATCC 12478), the M. kansasii 6509/96 clinical isolate, M. kansasii DSM 44162, M. avium CNCTC My 330/80 (identical with ATCC 25291), M. smegmatis ATCC 700084 and M. marinum CAMP 5644, respectively. In vitro susceptibility of the mycobacteria to reference drugs isoniazid, ethambutol, ofloxacin or ciprofloxacin was tested as well. A very unique aspect of the research was that many compounds from the set 1a⁻p were highly efficient almost against all tested mycobacteria. The most promising derivatives showed MIC values varied from 1.9 µM to 8 µM, which were lower compared to those of used standards, especially if concerning ability to fight M. tuberculosis H37Ra ATCC 25177, M. kansasii DSM 44162 or M. avium CNCTC My 330/80. Current in vitro biological assays and systematic SAR studies based on PCA approach as well as fitting procedures, which were supported by relevant statistical descriptors, proved that the compounds 1a⁻p represented a very promising molecular framework for development of 'non-traditional' but effective antimycobacterial agents.

Improved Stability of Tuberculosis Drug Fixed-Dose Combination Using Isoniazid-Caffeic Acid and Vanillic Acid Cocrystal.

The classic fixed-dose combination (FDC) of 4 tuberculosis drugs, namely rifampicin (RIF), isoniazid (INH), pyrazinamide (PZA), and ethambutol dihydrochloride (EDH) has the twin issues of physical stability and RIF cross-reaction in the 4-FDC. The major reason for these quality issues is the interaction between RIF and INH to yield isonicotinyl hydrazone in drug tablets. Pharmaceutical cocrystals of INH with caffeic acid (CFA) (PZA + EDH + RIF + INH-CFA cocrystal) and vanillic acid (VLA) (PZA + EDH + RIF + INH-VLA cocrystal) are able to stabilize the FDC formulation compared with the reference batch (PZA + EDH + RIF + INH). Stability studies under accelerated humidity and temperature stress conditions of 40°C and 75% relative humidity showed that the physical stability of the cocrystal formulation was superior by powder X-ray diffraction and scanning electron microscopy analysis, and chemical purity was analyzed by high-performance liquid chromatography. Changes in the composition and structure were monitored on samples drawn at 7, 15, 22, and 30 days of storage. FDC-INH-CFA cocrystal batch exhibited greater stability compared with FDC-INH-VLA cocrystal and FDC reference drug batches. The superior stability of INH-CFA cocrystal is attributed to the presence of stronger hydrogen bonds and cyclic O-H⋯O synthon in the crystal structure.

Achieving High 1 H Nuclear Hyperpolarization Levels with Long Lifetimes in a Range of Tuberculosis Drug Scaffolds.

Despite the successful use of isoniazid, rifampicin, pyrazinamide and ethambutol in the treatment of tuberculosis (TB), it is a disease of growing global concern. We illustrate here a series of methods that will dramatically improve the magnetic resonance imaging (MRI) detectability of nineteen TB-relevant agents. We note that the future probing of their uptake and distribution in vivo would be expected to significantly enhance their efficacy in disease treatment. This improvement in detectability is achieved by use of the parahydrogen based SABRE protocol in conjunction with the 2 H-labelling of key sites within their molecular structures and the 2 H-labelling of the magnetization transfer catalyst. The T1 relaxation times and polarization levels of these agents are quantified under test conditions to produce a protocol to identify structurally optimized motifs for future detection. For example, deuteration of the 6-position of a pyrazinamide analogue leads to a structural form that exhibits T1 values of 144.5 s for 5-H with up to 20 % polarization. This represents a >7-fold extension in relaxation time and almost 10-fold improvement in polarization level when compared to its unoptimized structure.

Nano-Formulation of Ethambutol with Multifunctional Graphene Oxide and Magnetic Nanoparticles Retains Its Anti-Tubercular Activity with Prospects of Improving Chemotherapeutic Efficacy.

Tuberculosis (TB) is a dreadful bacterial disease, infecting millions of human and cattle every year worldwide. More than 50 years after its discovery, ethambutol continues to be an effective part of the World Health Organization's recommended frontline chemotherapy against TB. However, the lengthy treatment regimens consisting of a cocktail of antibiotics affect patient compliance. There is an urgent need to improve the current therapy so as to reduce treatment duration and dosing frequency. In this study, we have designed a novel anti-TB multifunctional formulation by fabricating graphene oxide with iron oxide magnetite nanoparticles serving as a nano-carrier on to which ethambutol was successfully loaded. The designed nanoformulation was characterised using various analytical techniques. The release of ethambutol from anti-TB multifunctional nanoparticles formulation was found to be sustained over a significantly longer period of time in phosphate buffer saline solution at two physiological pH (7.4 and 4.8). Furthermore, the nano-formulation showed potent anti-tubercular activity while remaining non-toxic to the eukaryotic cells tested. The results of this in vitro evaluation of the newly designed nano-formulation endorse its further development in vivo.

Ester-prodrugs of ethambutol control its antibacterial activity and provide rapid screening for mycobacterial hydrolase activity.

M. tuberculosis contains an unusually high number of serine hydrolases by proteome percentage compared to other common bacteria or humans. This letter describes a method to probe the global substrate specificity of mycobacterial serine hydrolases with ester-protected prodrugs of ethambutol, a first-line antibiotic treatment for TB. These compounds were synthesized directly from ethambutol using a selective o-acylation to yield products in high yield and purity with minimal workup. A library of derivatives was screened against M. smegmatis, a non-infectious model for M. tuberculosis, which displayed significantly lowered biological activity compared to ethambutol. Incubation with a general serine hydrolase reactivated each derivative to near-ethambutol levels, demonstrating that esterification of ethambutol should provide a simple screen for mycobacterial hydrolase activity.

Production of (S)-2-aminobutyric acid and (S)-2-aminobutanol in Saccharomyces cerevisiae.

BACKGROUND: Saccharomyces cerevisiae (baker's yeast) has great potential as a whole-cell biocatalyst for multistep synthesis of various organic molecules. To date, however, few examples exist in the literature of the successful biosynthetic production of chemical compounds, in yeast, that do not exist in nature. Considering that more than 30% of all drugs on the market are purely chemical compounds, often produced by harsh synthetic chemistry or with very low yields, novel and environmentally sound production routes are highly desirable. Here, we explore the biosynthetic production of enantiomeric precursors of the anti-tuberculosis and anti-epilepsy drugs ethambutol, brivaracetam, and levetiracetam. To this end, we have generated heterologous biosynthetic pathways leading to the production of (S)-2-aminobutyric acid (ABA) and (S)-2-aminobutanol in baker's yeast. RESULTS: We first designed a two-step heterologous pathway, starting with the endogenous amino acid L-threonine and leading to the production of enantiopure (S)-2-aminobutyric acid. The combination of Bacillus subtilis threonine deaminase and a mutated Escherichia coli glutamate dehydrogenase resulted in the intracellular accumulation of 0.40 mg/L of (S)-2-aminobutyric acid. The combination of a threonine deaminase from Solanum lycopersicum (tomato) with two copies of mutated glutamate dehydrogenase from E. coli resulted in the accumulation of comparable amounts of (S)-2-aminobutyric acid. Additional L-threonine feeding elevated (S)-2-aminobutyric acid production to more than 1.70 mg/L. Removing feedback inhibition of aspartate kinase HOM3, an enzyme involved in threonine biosynthesis in yeast, elevated (S)-2-aminobutyric acid biosynthesis to above 0.49 mg/L in cultures not receiving additional L-threonine. We ultimately extended the pathway from (S)-2-aminobutyric acid to (S)-2-aminobutanol by introducing two reductases and a phosphopantetheinyl transferase. The engineered strains produced up to 1.10 mg/L (S)-2-aminobutanol. CONCLUSIONS: Our results demonstrate the biosynthesis of (S)-2-aminobutyric acid and (S)-2-aminobutanol in yeast. To our knowledge this is the first time that the purely synthetic compound (S)-2-aminobutanol has been produced in vivo. This work paves the way to greener and more sustainable production of chemical entities hitherto inaccessible to synthetic biology.

Study on the interaction between anti-tuberculosis drug ethambutol and bovine serum albumin: multispectroscopic and cyclic voltammetric approaches.

The binding of bovine serum albumin (BSA) to ethambutol (EMB) was investigated using spectroscopic methods, viz., fluorescence, Fourier transform infrared (FTIR), ultraviolet (UV)/vis absorption and cyclic voltammetry techniques. Spectroscopic analysis of the emission quenching at different temperatures revealed that the quenching mechanism of serum albumin by EMB is static, which was also confirmed by lifetime measurements. The number of binding sites, n, and binding constant, K, were obtained at various temperatures. The distance, r, between EMB and the protein was evaluated according to the Förster energy transfer theory. Based on displacement experiments using site probes, viz., warfarin, ibuprofen and digitoxin, the site of binding of EMB in BSA was proposed to be Sudlow's site I. The effect of EMB on the conformation of BSA was analyzed by using synchronous fluorescence spectra (SFS) and 3D fluorescence spectra. The results of fluorescence, UV/vis absorption and FTIR spectra showed that the conformation of BSA was changed in the presence of EMB. The thermodynamic parameters including enthalpy change (ΔH0 ), entropy change (ΔS0 ) and free energy change (ΔG0 ) for BSA-EMB were calculated according to the van't Hoff equation and are discussed.