RESUMO
In the industrial sector, vegetable residual materials have received attention in the production of bio-colorant for textile dyeing. The current research endeavor is centered on investigating the possibility of using sugar beet leaves as a natural source of dye for the purpose of dyeing cotton fabrics. Different extraction methods were utilized to isolate the bio-colorant present in sugar beet residual material, and the most favorable colorant yield was obtained using a 5% methanolic KOH solution. For optimal dyeing results, the cotton fabric performed dyeing for a duration of 45 min at a temperature of 60â °C, using a salt solution concentration of 6 g/100 mL and 50 mL of the extracted dye solution. Characterization of dye using Fourier transform infrared spectroscopy analysis confirmed the presence of quercetin in the leaf extract. For the creation of a range of color variations, mordants that were chemical in nature, such as tannic acid, iron sulfate, potassium dichromate, and copper sulfate, as well as mordants that were bio-based, such as onion peel, pomegranate peel, henna, golden shower bark, and turmeric, were employed in harmony. In comparison, the utilization of bio-mordants resulted in darker shades that exhibited enhanced color intensity and superior color fastness properties with the value of 4-5 for wash, 4 for wet rubbing, 4-5 for dry rubbing, and 4-5 for light. The findings of this study hold significant value in terms of ecofriendly waste management and contribute to advancements in the industrial sector by utilizing waste residual materials as a natural source of colorants.
Assuntos
Beta vulgaris , Corantes , Folhas de Planta , Beta vulgaris/química , Folhas de Planta/química , Corantes/química , Extratos Vegetais/química , Espectroscopia de Infravermelho com Transformada de Fourier , Fibra de Algodão/análise , Cor , Indústria TêxtilRESUMO
Cotton is used for the production of textiles, hygiene and cosmetic materials. During cultivation and technological processes, various types of substances (surfactants, softeners, lubricants, etc.) penetrate cotton, which can have a harmful effect on both the human body and the environment. The aim of this study was to analyze selected cotton products in order to identify the substances contained and to describe the potential possibilities of inducing textile contact dermatitis (CD). The impact of the identified compounds on the aquatic environment was also taken into account. Nine samples of cotton clothing and seven samples of cotton pads from various manufacturers were tested. Samples after extraction using the FUSLE (Focused Ultrasonic Liquid Extraction) technique were analyzed with GC/MS. Qualitative analysis was based on comparing mass spectra with library spectra using the following mass spectra deconvolution programs: MassHunter (Agilent), AMDIS (NIST), and PARADISE (University of Copenhagen). The parameter confirming the identification of the substance was the retention index. Through the non-target screening process, a total of 36 substances were identified, with an average AMDIS match factor of approximately 900 ("excellent match"). Analyzing the properties of the identified compounds, it can be concluded that most of them have potential properties that can cause CD, also due to the relatively high content in samples. This applies primarily to long-chain alkanes (C25-C31), saturated fatty acids, fatty alcohols (e.g., oleyl alcohol), and fatty acid amides (e.g., oleamide). However, there are not many reports describing cases of cotton CD. Information on the identified groups of compounds may be helpful in the case of unexplained sources of sensitization when the skin comes into contact with cotton materials. Some of the identified compounds are also classified as dangerous for aquatic organisms, especially if they can be released during laundering.
Assuntos
Fibra de Algodão , Cromatografia Gasosa-Espectrometria de Massas , Cromatografia Gasosa-Espectrometria de Massas/métodos , Fibra de Algodão/análise , Humanos , Têxteis/análise , Dermatite de Contato/etiologiaRESUMO
The growing activity in the textile industry has been demanding the search for new and innovative technologies to meet consumers' needs regarding more sustainable and ecological processes, with functionality receiving more attention. Bee products are known for their wide spectra of properties, including antioxidant and antibacterial activities. Propolis and honey are the most popular and used since ancient times for the most diverse applications due to their health benefits. With the increasing need for safer and more sustainable practices, the use of natural products for the functional finishing process can be a suitable alternative due to their safety and eco-friendly nature. For that, a biosolution, composed of a mixture of propolis and honey in water, was used to perform the functional finishing of cotton knits, both in the presence and in the absence of potassium alum as a chemical mordant. The fastness strength was also evaluated after three washing cycles. The antioxidant potential of the biosolution, assessed with the in vitro ABTS scavenging assay, provided textiles with the capacity to reduce more than 90% of the ABTS radical, regardless of the mordant presence and even after three washing cycles. Furthermore, biofunctional textiles decreased the growth of Bacillus subtilis, Propionibacterium acnes, Escherichia coli, and, particularly, Staphylococcus aureus cultures after 24 h of incubation with an increase in antibacterial activity when potassium alum was used. These findings show that bee products are promising and effective alternatives to be used in the textile industry to confer antioxidant and antibacterial properties to cotton textiles, thereby enhancing human health.
Assuntos
Antibacterianos , Antioxidantes , Mel , Própole , Própole/química , Própole/farmacologia , Mel/análise , Antioxidantes/farmacologia , Antioxidantes/química , Antibacterianos/farmacologia , Antibacterianos/química , Têxteis , Fibra de Algodão/análise , Staphylococcus aureus/efeitos dos fármacos , Staphylococcus aureus/crescimento & desenvolvimento , Testes de Sensibilidade Microbiana , Escherichia coli/efeitos dos fármacos , Escherichia coli/crescimento & desenvolvimento , Compostos de Alúmen/química , Bacillus subtilis/efeitos dos fármacos , Bacillus subtilis/crescimento & desenvolvimentoRESUMO
With the development of technology, people's demand for pressure sensors with high sensitivity and a wide working range is increasing. An effective way to achieve this goal is simulating human skin. Herein, we propose a facile, low-cost, and reproducible method for preparing a skin-like multi-layer flexible pressure sensor (MFPS) device with high sensitivity (5.51 kPa-1 from 0 to 30 kPa) and wide working pressure range (0-200 kPa) by assembling carbonized fabrics and micro-wrinkle-structured Ag@rGO electrodes layer by layer. In addition, the highly imitated skin structure also provides the device with an extremely short response time (60/90 ms) and stable durability (over 3000 cycles). Importantly, we integrated multiple sensor devices into gloves to monitor finger movements and behaviors. In summary, the skin-like MFPS device has significant potential for real-time monitoring of human activities in the field of flexible wearable electronics and human-machine interaction.
Assuntos
Fibra de Algodão , Pressão , Dispositivos Eletrônicos Vestíveis , Humanos , Fibra de Algodão/análise , Monitorização Fisiológica/instrumentação , Monitorização Fisiológica/métodos , Técnicas Biossensoriais/instrumentação , Técnicas Biossensoriais/métodos , Eletrodos , Pele , Têxteis , Atividades HumanasRESUMO
Plasmodesmata are transmembrane channels embedded within the cell wall that can facilitate the intercellular communication in plants. Plasmodesmata callose-binding (PDCB) protein that associates with the plasmodesmata contributes to cell wall extension. Given that the elongation of cotton fiber cells correlates with the dynamics of the cell wall, this protein can be related to the cotton fiber elongation. This study sought to identify PDCB family members within the Gossypium. hirsutum genome and to elucidate their expression profiles. A total of 45 distinct family members were observed through the identification and screening processes. The analysis of their physicochemical properties revealed the similarity in the amino acid composition and molecular weight across most members. The phylogenetic analysis facilitated the construction of an evolutionary tree, categorizing these members into five groups mainly distributed on 20 chromosomes. The fine mapping results facilitated a tissue-specific examination of group V, revealing that the expression level of GhPDCB9 peaked five days after flowering. The VIGS experiments resulted in a marked decrease in the gene expression level and a significant reduction in the mature fiber length, averaging a shortening of 1.43-4.77 mm. The results indicated that GhPDCB9 played a pivotal role in the cotton fiber development and served as a candidate for enhancing cotton yield.
Assuntos
Fibra de Algodão , Gossypium , Filogenia , Proteínas de Plantas , Plasmodesmos , Gossypium/genética , Gossypium/metabolismo , Plasmodesmos/metabolismo , Fibra de Algodão/análise , Proteínas de Plantas/genética , Proteínas de Plantas/metabolismo , Regulação da Expressão Gênica de Plantas , Glucanos/metabolismo , Família Multigênica , Parede Celular/metabolismo , Parede Celular/genética , Proteínas de Transporte/genética , Proteínas de Transporte/metabolismoRESUMO
Non-degradable plastic mulch films used in agriculture are polluting the environment by leaving residues and microplastics in the soil. They are also difficult to recycle due to contamination during their use. Biodegradable mulch films are needed as alternatives so that they can be used effectively during the growing season and later be ploughed to be degraded in soil. However, market-available so-called biodegradable mulch films are very slow to degrade in the natural environment and thus do not fit with crop rotation demands or annual cultivation. In this study, we have developed mulch films from cotton gin trash (CGT) and/or gin motes (GM) in combination with biodegradable polycaprolactone and demonstrated their effectiveness over 3 months in outdoor conditions. Both the stability and degradation behaviours of mulch film samples were observed when they were placed on top of the soil and buried in the soil, respectively. Pesticide residue analysis also was carried out on CGT powder to identify and quantify individual pesticides against a matrix of known pesticides. The mulch films prepared in this study showed comparable and stable mechanical properties compared to commercial biodegradable mulch film, though were much quicker to degrade when buried in the soil. No pesticides were detected in the CGT samples. The films produced were vapour-permeable and may be useful in practical agricultural settings by being able to maintain consistent soil moisture and allowing precipitation to penetrate gradually. The lab-scale production cost for the film was 98.8 AUD/kg, which could be lowered by integrating a continuous film line in large-scale production.
Assuntos
Resíduos de Praguicidas , Poluentes do Solo , Resíduos de Praguicidas/análise , Poluentes do Solo/análise , Agricultura/métodos , Biodegradação Ambiental , Gossypium , Fibra de Algodão/análiseRESUMO
To determine the genes associated with the fiber strength trait in cotton, three different cotton cultivars were selected: Sea Island cotton (Xinhai 32, with hyper-long fibers labeled as HL), and upland cotton (17-24, with long fibers labeled as L, and 62-33, with short fibers labeled as S). These cultivars were chosen to assess fiber samples with varying qualities. RNA-seq technology was used to analyze the expression profiles of cotton fibers at the secondary cell wall (SCW) thickening stage (20, 25, and 30 days post-anthesis (DPA)). The results showed that a large number of differentially expressed genes (DEGs) were obtained from the three assessed cotton cultivars at different stages of SCW development. For instance, at 20 DPA, Sea Island cotton (HL) had 6,215 and 5,364 DEGs compared to upland cotton 17-24 (L) and 62-33 (S), respectively. Meanwhile, there were 1,236 DEGs between two upland cotton cultivars, 17-24 (L) and 62-33 (S). Gene Ontology (GO) term enrichment identified 42 functions, including 20 biological processes, 11 cellular components, and 11 molecular functions. Kyoto Encyclopedia of Genes and Genomes (KEGG) enrichment analysis identified several pathways involved in SCW synthesis and thickening, such as glycolysis/gluconeogenesis, galactose metabolism, propanoate metabolism, biosynthesis of unsaturated fatty acids pathway, valine, leucine and isoleucine degradation, fatty acid elongation pathways, and plant hormone signal transduction. Through the identification of shared DEGs, 46 DEGs were found to exhibit considerable expressional differences at different fiber stages from the three cotton cultivars. These shared DEGs have functions including REDOX enzymes, binding proteins, hydrolases (such as GDSL thioesterase), transferases, metalloproteins (cytochromatin-like genes), kinases, carbohydrates, and transcription factors (MYB and WRKY). Therefore, RT-qPCR was performed to verify the expression levels of nine of the 46 identified DEGs, an approach which demonstrated the reliability of RNA-seq data. Our results provided valuable molecular resources for clarifying the cell biology of SCW biosynthesis during fiber development in cotton.
Assuntos
Parede Celular , Fibra de Algodão , Regulação da Expressão Gênica de Plantas , Gossypium , Gossypium/genética , Gossypium/metabolismo , Gossypium/crescimento & desenvolvimento , Fibra de Algodão/análise , Parede Celular/metabolismo , Parede Celular/genética , Perfilação da Expressão Gênica , TranscriptomaRESUMO
Cotton fabric has extensive application due to its comfort and breathability. However, the inherent flammability limits its wide application. Durable polysaccharide-based flame retardants with a low impact on the softness of fabrics are rarely reported. In this work, a novel flame retardant ammonium phosphate of lentinan (APLNT) was synthesized and grafted on the surface of cotton fabric. The treated cotton fabric had a high limiting oxygen index (LOI) value of 43.3 % and passed the vertical burning test (VBT) with a 21.1 % weight gain of APLNT. Compared with control cotton, the peak heat release rate and total heat release values of Cotton-APLNT2 decreased by 92.8 % and 50.9 %, respectively. In addition, the cotton fabric still passed the VBT and kept an LOI value of 27.0 % even after 50 laundering cycles, indicating that the fabric can be used for daily needs. More importantly, the treated fabric remains soft. This research provided a new strategy for preparing bio-based durable flame retardant cotton fabrics.
Assuntos
Fibra de Algodão , Retardadores de Chama , Lentinano , Retardadores de Chama/análise , Fibra de Algodão/análise , Lentinano/química , Têxteis , Fosfatos/químicaRESUMO
In order to fulfill the demands for degradability, a broad working range, and heightened sensitivity in flexible sensors, biodegradable polyurethane (BTPU) was synthesized and combined with CNTs to produce BTPU/CNTs coated cotton fabric using an ultrasonic-assisted inkjet printing process. The synthesized BTPU displayed a capacity for degradation in a phosphate buffered saline solution, resulting in a weight loss of 25 % after 12 weeks of degradation. The BTPU/CNTs coated cotton fabric sensor achieved an extensive strain sensing range of 0-137.5 %, characterized by high linearity and a notable sensitivity (gauge factor (GF) of 126.8). Notably, it demonstrated a low strain detection limit (1 %), rapid response (within 280 ms), and robust durability, enabling precise monitoring of both large and subtle human body movements such as finger, wrist, neck, and knee bending, as well as swallowing. Moreover, the BTPU/CNTs coated cotton fabric exhibited favorable biocompatibility with human epidermis, enabling potential applications as wearable skin-contact sensors. This work provides insight into the development of degradable and high sensing performance sensors suitable for applications in electronic skins and health monitoring devices.
Assuntos
Fibra de Algodão , Nanotubos de Carbono , Poliésteres , Poliuretanos , Poliuretanos/química , Fibra de Algodão/análise , Humanos , Poliésteres/química , Nanotubos de Carbono/química , Dispositivos Eletrônicos Vestíveis , Impressão , Têxteis , Materiais Biocompatíveis/químicaRESUMO
A novel flame retardant containing Si, N, and S elements, ((2-(triethoxysilyl)ethyl)thio)ethan-1-amine hydrochloride (TETEA), was synthesized via a click reaction and characterized using nuclear magnetic resonance spectroscopy (NMR) and fourier transform infrared spectroscopy (FTIR). Subsequently, the flame-retardant cotton fabric was fabricated by sol-gel method. The results indicated that TETEA was successfully loaded on cotton fabric and formed a uniform protective layer on the surface of cotton fabric, exhibiting excellent flame retardancy. The flame-retardant cotton fabric achieved limiting oxygen index (LOI) of 28.3 % and passed vertical combustion test without after-flame or afterglow time at TETEA concentration of 500 g/L. Thermogravimetric analysis revealed that the residual carbon content of the flame-retardant cotton fabric was much higher than that of the control under air and N2 conditions. Besides, the flame-retardant cotton fabric was not ignited in cone calorimeter test with an external heat flux of 35 kW/m2. The peak heat release rate and the total heat release decreased from 133.4 kW/m2 to 25.8 kW/m2 and from 26.46 MJ/m2 to 17.96 MJ/m2, respectively. This phosphorus-free flame retardant offers a simplified synthesis process without adverse environmental impacts, opening up a new avenue for the development environmentally friendly flame retardants compared to traditional alternatives.
Assuntos
Celulose , Fibra de Algodão , Retardadores de Chama , Retardadores de Chama/síntese química , Retardadores de Chama/análise , Fibra de Algodão/análise , Celulose/química , Celulose/análogos & derivados , Nitrogênio/química , Silício/química , Espectroscopia de Infravermelho com Transformada de Fourier , Termogravimetria , Substâncias Macromoleculares/química , Substâncias Macromoleculares/síntese químicaRESUMO
Pilling is a form of textile mechanical damage, forming fibrous bobbles on the surface of garments, resulting in premature disposal of clothing by consumers. However, our understanding on how the structural properties of the cellulosic matrix compliment the three-dimensional shape of cotton pills remains limited. This knowledge gap has hindered the development of effective 'pillase' technologies over the past 20 years due to challenges in balancing depilling efficacy with fabric integrity preservation. Therefore, the main focus here was characterising the role of cellulose and the hemicellulose components in cotton textiles to elucidate subtle differences between the chemistry of pills and fibre regions involved in structural integrity. State-of-the-art bioimaging using carbohydrate binding modules, monoclonal antibodies, and Leica SP8 and a Nikon A1R confocal microscopes, revealed the biophysical structure of cotton pills for the first time. Identifying regions of increased crystalline cellulose in the base of anchor fibres and weaker amorphous cellulose at dislocations in their centres, enhancing our understanding of current enzyme specificity. Surprisingly, pills contained a 7-fold increase in the concentration of xyloglucan compared to the main textile. Therefore, xyloglucan offers a previously undescribed target for overcoming this benefit-to-risk paradigm, suggesting a role for xyloglucanase enzymes in future pillase systems.
Assuntos
Celulose , Fibra de Algodão , Glucanos , Xilanos , Celulose/química , Fibra de Algodão/análise , Xilanos/química , Xilanos/metabolismo , Glucanos/química , Cristalização , Têxteis , Polissacarídeos/químicaRESUMO
This study reports the findings from using time-domain nuclear magnetic resonance (TD-NMR) to analyze the pore structures of cotton fibers. Cotton fibers, which swell and soften in water, present challenges for conventional pore measurement techniques. TD-NMR overcomes these by measuring the transverse relaxation time (T2) of water protons within the fibers, indicative of internal pore sizes. We established a T2-to-pore size conversion equation using mixed cellulose ester membranes. This enabled differentiation between strongly bound, loosely bound, and free water within the fibers, and detailed the water distribution. A method for measuring the pore size distribution of wet cotton fiber was developed using TD-NMR. We then examined how various pretreatments affect the fibers' internal pores by comparing their pore size distribution and porosity. Specifically, caustic mercerization primarily enlarges the porosity and size of larger pores, while liquid ammonia treatment increases porosity but reduces the size of smaller pores. This research confirms TD-NMR's utility in assessing cotton fabrics' wet processing performance.
Assuntos
Fibra de Algodão , Espectroscopia de Ressonância Magnética , Fibra de Algodão/análise , Porosidade , Espectroscopia de Ressonância Magnética/métodos , Água/químicaRESUMO
INTRODUCTION: Surgical cap attire plays an important role in creating a safe and sterile environment in procedural suites, thus the choice of reusable versus disposable caps has become an issue of much debate. Given the lack of evidence for differences in surgical site infection (SSI) risk between the two, selecting the cap option with a lower carbon footprint may reduce the environmental impact of surgical procedures. However, many institutions continue to recommend the use of disposable bouffant caps. METHODS: ISO-14044 guidelines were used to complete a process-based life cycle assessment to compare the environmental impact of disposable bouffant caps and reusable cotton caps, specifically focusing on CO2 equivalent (CO2e) emissions, water use and health impacts. RESULTS: Reusable cotton caps reduced CO2e emissions by 79% when compared to disposable bouffant caps (10 kg versus 49 kg CO2e) under the base model scenario with a similar reduction seen in disability-adjusted life years. However, cotton caps were found to be more water intensive than bouffant caps (67.56 L versus 12.66 L) with the majority of water use secondary to production or manufacturing. CONCLUSIONS: Reusable cotton caps have lower total lifetime CO2e emissions compared to disposable bouffant caps across multiple use scenarios. Given the lack of evidence suggesting a superior choice for surgical site infection prevention, guidelines should recommend reusable cotton caps to reduce the environmental impact of surgical procedures.
Assuntos
Equipamentos Descartáveis , Reutilização de Equipamento , Reutilização de Equipamento/normas , Humanos , Pegada de Carbono , Fibra de Algodão/análise , Campos Cirúrgicos , Infecção da Ferida Cirúrgica/prevenção & controle , Infecção da Ferida Cirúrgica/etiologiaRESUMO
This study addresses the challenge of incomplete separation of mechanically recovered residual films and impurities in cotton fields, examining their impact on resource utilization and environmental pollution. It introduces an innovative screening method that combines pneumatic force and mechanical vibration for processing crushed film residue mixtures. A double-action screening device integrating pneumatic force and a key-type vibrating screen was developed. The working characteristics of this device were analyzed to explore the dynamic characteristics and kinematic laws of the materials using theoretical analysis methods. This led to the revelation of the screening laws of residual films and impurities. Screening tests were conducted using the Central Composite Design method, considering factors such as fan outlet, fan speed, vibration frequency of the screen, and feeding amount, with the impurity-rate-in-film (Q) and film-content-in-impurity (W) as evaluation indexes. The significant influence of each factor on the indexes was determined, regression models between the test factors and indexes were established, and the effect laws of key parameters and their significant interaction terms on the indexes were interpreted. The optimal combination of working parameters for the screening device was identified through multivariable optimization methods. Validation tests under this optimal parameters combination showed that the impurity-rate-in-film was 3.08% and the film-content-in-impurity was 1.94%, with average errors between the test values and the predicted values of 3.36% and 5.98%, respectively, demonstrating the effectiveness of the proposed method. This research provides a novel method and technical reference for achieving effective separation of residual film and impurities, thereby enhancing resource utilization.
Assuntos
Gossypium , Fibra de Algodão/análise , Poluição Ambiental/prevenção & controleRESUMO
KEY MESSAGE: A Bayesian linkage disequilibrium-based multiple-locus mixed model identified QTLs for fibre, seed and oil traits and predicted breeding worthiness of test lines, enabling their simultaneous improvement in cotton. Improving cotton seed and oil yields has become increasingly important while continuing to breed for higher lint yield. In this study, a novel Bayesian linkage disequilibrium-based multiple-locus mixed model was developed for QTL identification and genomic prediction (GP). A multi-parent population consisting of 256 recombinant inbred lines, derived from four elite cultivars with distinct combinations of traits, was used in the analysis of QTLs for lint percentage, seed index, lint index and seed oil content and their interrelations. All four traits were moderately heritable and correlated but with no large influence of genotype × environment interactions across multiple seasons. Seven to ten major QTLs were identified for each trait with many being adjacent or overlapping for different trait pairs. A fivefold cross-validation of the model indicated prediction accuracies of 0.46-0.62. GP results based on any two-season phenotypes were strongly correlated with phenotypic means of a pooled analysis of three-season experiments (r = 0.83-0.92). When used for selection of improvement in lint, seed and oil yields, GP captured 40-100% of individuals with comparable lint yields of those selected based on the three-season phenotypic results. Thus, this quantitative genomics-enabled approach can not only decipher the genomic variation underlying lint, seed and seed oil traits and their interrelations, but can provide predictions for their simultaneous improvement. We discuss future breeding strategies in cotton that will enhance the entire value of the crop, not just its fibre.
Assuntos
Teorema de Bayes , Gossypium , Desequilíbrio de Ligação , Fenótipo , Melhoramento Vegetal , Locos de Características Quantitativas , Sementes , Gossypium/genética , Gossypium/crescimento & desenvolvimento , Sementes/genética , Sementes/crescimento & desenvolvimento , Melhoramento Vegetal/métodos , Genótipo , Genômica/métodos , Mapeamento Cromossômico/métodos , Fibra de Algodão/análise , Modelos Genéticos , Seleção GenéticaRESUMO
Information on boll distribution within a cotton plant is critical to evaluate the adaptation and response of cotton plants to environmental and biotic stress in cotton production. Cotton researchers have applied available conventional fiber measurements, such as the high volume instrument (HVI) and advanced fiber information system (AFIS), to map the location and the timing of boll development and distribution within plants and further to determine within-plant variability of cotton fiber properties. Both HVI and AFIS require numerous cotton bolls combined for the measurement. As an alternative approach, attenuated total reflection Fourier transform infrared (ATR FT-IR) spectroscopy was proposed to measure fiber maturity (MIR) and crystallinity (CIIR) of a sample as little as 0.5 mg lint. Extending fiber maturity and crystallinity measurement into a single boll for node-by-node mapping, FT-IR method might be advantageous due to less sampling amount compared with HVI and AFIS methods. Results showed that FT-IR technique enabled the evaluation of fiber MIR and CIIR at a boll level, which resulted in average MIR and CIIR values highly correlated with HVI micronaire (MIC) and AFIS maturity ratio (M). Hence, FT-IR technique possesses a good potential for a rapid and non-destructive node-by-node mapping of cotton boll maturity and crystallinity distribution.
Assuntos
Algoritmos , Fibra de Algodão , Gossypium , Fibra de Algodão/análise , Espectroscopia de Infravermelho com Transformada de Fourier/métodos , Gossypium/química , Gossypium/crescimento & desenvolvimentoRESUMO
Rapid development of society and the improvement of people's living standards have stimulated people's keen interest in fashion clothing. This trend has led to the acceleration of new product innovation and the shortening of the lifespan for cotton fabrics, which has resulting in the accumulation of waste cotton textiles. Although cotton fibers can be degraded naturally, direct disposal not only causes a serious resource waste, but also brings serious environmental problems. Hence, it is significant to explore a cleaner and greener waste textile treatment method in the context of green and sustainable development. To realize the high-value utilization of cellulose II aerogel derived from waste cotton products, great efforts have been made and considerable progress has been achieved in the past few decades. However, few reviews systematically summarize the research progress and future challenges of preparing high-value-added regenerated cellulose aerogels via dissolving cotton and other cellulose wastes. Therefore, this article reviews the regenerated cellulose aerogels obtained through solvent methods, summarizes their structure, preparation strategies and application, aimed to promote the development of the waste textile industry and contributed to the realization of carbon neutrality.
Assuntos
Celulose , Fibra de Algodão , Géis , Têxteis , Celulose/química , Fibra de Algodão/análise , Géis/químicaRESUMO
BACKGROUND: Respiratory diseases have been associated with the exposure of populations to some environmental pollutants such as pesticides. To assess effects of pesticides on farmers' respiratory health, this study aimed to evaluate the pulmonary function of cotton farmers exposed to synthetic and natural pesticides in the Central-West region of Burkina Faso. METHODS: A cross-sectional study was conducted from June to July 2022 among 281 conventional and 189 organic cotton farmers. After collecting information on pesticide use conditions, pulmonary function tests (PFTs) were performed on each farmer according to the American Thoracic Society/European Respiratory Society guidelines, in order to assess chronic respiratory effects among cotton producers. Binary logistic regression was used to assess factors associated with the occurrence of ventilatory changes. RESULTS: Both conventional and organic cotton farmers reported similar chronic respiratory symptoms in different proportions. The main reported were rhinitis (54.45% conventional vs. 34.92% organic), chest pains (41.28% conventional vs. 23.81% organic), cough (33.45% conventional, 24.34% organic), breathlessness (31.67% conventional, 4.23% organic) (p<0.05). 16.18% and 27.50% of conventional male and female cotton farmers, respectively, had a restrictive defect. Among organic cotton farmers, 15.85% and 18.69%, respectively, of males and females had a restrictive defect. Furthermore, a significant increase in the predicted average percentage of FEV1/FVC ratio was observed among organic cotton farmers after salbutamol's use (p = 0.039). The type of cultivated cotton was not associated with ventilatory changes neither in the univariate analysis, nor in the multivariate analysis. Other factors such as farmers' age, BMI and insecticides use frequency per year were also important. Farmers who used insecticides more than 6 times per season had an increased risk of developing an obstructive defect (OR = 1.603; 95%CI: 0.484-5.309) compared to those who used them 6 times or less. CONCLUSION: Chronic respiratory signs and ventilatory impairments were found among conventional and, to our knowledge, for the first time among organic cotton producers. However, these health effects were more prevalent among conventional cotton farmers than organic ones.
Assuntos
Fazendeiros , Exposição Ocupacional , Praguicidas , Testes de Função Respiratória , Humanos , Masculino , Praguicidas/efeitos adversos , Feminino , Exposição Ocupacional/efeitos adversos , Adulto , Estudos Transversais , Pessoa de Meia-Idade , Burkina Faso/epidemiologia , Doenças dos Trabalhadores Agrícolas/epidemiologia , Doenças dos Trabalhadores Agrícolas/induzido quimicamente , Agricultura , Fibra de Algodão/análise , Gossypium , Agricultura OrgânicaRESUMO
Cotton fabric is extensively utilized due to its numerous applications, but the flammability associated with cotton fabric poses potential security risks to individuals. A halogen-free efficient flame retardant named poly [(tetramethylcyclosiloxyl spirocyclic pentaerythritol)-piperazin phosphate] (PCPNTSi) was developed to consolidate the fire retardance of cotton fabrics. After PCPNTSi treatment, the limiting oxygen index (LOI) of cotton fabric with 30 % weight gain (CP3) was raised to 32.8 %. In the vertical flammability test (VFT), CP3 has self-extinguished performance with a char length of 8.7 cm. The heat release rate (HRR) of cotton fabric with 20 % weight gain (CP2) is 78.8 % lower than that of pure cotton fabric (CP0). In addition, the total smoke release (TSP) of CP2 is 41.7 % lower than that of CP0, indicating PCPNTSi gives cotton fabric a good capability to inhibit smoke release. Finally, the possible flame retardant mechanism was discussed by the data of scanning electron microscope (SEM), energy dispersive spectrometer (EDS), X-ray photoelectron spectroscopy (XPS), Fourier Transform infrared spectroscopy (FT-IR) and thermogravimetric infrared spectroscopy (TG-IR). The results show that PCPNTSi is an intumescent flame retardant acting in both gas phase and solid phase.
Assuntos
Fibra de Algodão , Retardadores de Chama , Retardadores de Chama/análise , Fibra de Algodão/análise , Nitrogênio/química , Têxteis/análiseRESUMO
Gossypium barbadense, which is one of several species of cotton, is well known for its superior fiber quality. However, the genetic basis of its high-quality fiber remains largely unexplored. Here, we resequenced 269 G. barbadense accessions. Phylogenetic structure analysis showed that the set of accessions was clustered into 3 groups: G1 and G2 mainly included modern cultivars from Xinjiang, China, and G3 was related to widely introduced accessions in different regions worldwide. A genome-wide association study of 5 fiber quality traits across multiple field environments identified a total of 512 qtls (main-effect QTLs) and 94 qtlEs (QTL-by-environment interactions) related to fiber quality, of which 292 qtls and 57 qtlEs colocated with previous studies. We extracted the genes located in these loci and performed expression comparison, local association analysis, and introgression segment identification. The results showed that high expression of hormone-related genes during fiber development, introgressions from Gossypium hirsutum, and the recombination of domesticated elite allelic variation were 3 major contributors to improve the fiber quality of G. barbadense. In total, 839 candidate genes with encoding region variations associated with elite fiber quality were mined. We confirmed that haplotype GB_D03G0092H traced to G. hirsutum introgression, with a 1-bp deletion leading to a frameshift mutation compared with GB_D03G0092B, significantly improved fiber quality. GB_D03G0092H is localized in the plasma membrane, while GB_D03G0092B is in both the nucleus and plasma membrane. Overexpression of GB_D03G0092H in Arabidopsis (Arabidopsis thaliana) significantly improved the elongation of longitudinal cells. Our study systematically reveals the genetic basis of the superior fiber quality of G. barbadense and provides elite segments and gene resources for breeding high-quality cotton cultivars.