Dynamic Peripheral Hemoperfusion Distribution Monitoring Based on Janus Flexible Sensor System.

OBJECTIVE: Peripheral vascular disease is a worldwide leading health concern. Real-time peripheral hemoperfusion monitoring during treatment is essential to plan treatment strategies to improve circulatory enhancement effects. METHODS: The present work establishes a Janus flexible perfusion (JFP) sensor system for dynamic peripheral hemoperfusion monitoring. We develop a Janus structure with different Young's modulus to improve the mechanical properties for motion artifacts suppression. Besides, we propose a peripheral perfusion index (PPI) based on an optical perfusion model that is experimentally verified using an in-vitro model. The effectiveness of the system is assessed in three experimental scenarios, including motion artifact-robust test, induced vascular occlusion, and peripheral hemoperfusion monitoring with the intermittent pneumatic compression treatment. RESULTS: The noise level of the traditional rigid sensor is five times that of the JFP sensor within the effective signal frequency domain when there is movement. The PPI can effectively discriminate between different peripheral hemoperfusion states and has a correlation coefficient of 0.92 with the Laser Doppler flowmetry (LDF) mean values. The kappa statistic between the JFP sensor and LDF is 0.78, indicating substantial agreement to estimate the peripheral hemoperfusion improvements. CONCLUSION: The sensor system we proposed can monitor peripheral hemoperfusion variation in real-time and is insensitive to motion artifacts. SIGNIFICANCE: The proposed sensing system provides a functional module for real-time estimation of peripheral hemoperfusion during clinical interventions.

Diagnosis of Skin Vascular Complications Revealed by Time-Frequency Analysis and Laser Doppler Spectrum Decomposition.

Nowadays, photonics-based techniques are used extensively in various applications, including functional clinical diagnosis, progress monitoring in treatment, and provision of metrological control. In fact, in the frame of practical implementation of optical methods, such as laser Doppler flowmetry (LDF), the qualitative interpretation and quantitative assessment of the detected signal remains vital and urgently required. In the conventional LDF approach, the key measured parameters, index of microcirculation and perfusion rate, are proportional to an averaged concentration of red blood cells (RBC) and their average velocity within a diagnostic volume. These quantities compose mixed signals from different vascular beds with a range of blood flow velocities and are typically expressed in relative units. In the current paper we introduce a new signal processing approach for the decomposition of LDF power spectra in terms of ranging blood flow distribution by frequency series. The developed approach was validated in standard occlusion tests conducted on healthy volunteers, and applied to investigate the influence of local pressure rendered by a probe on the surface of the skin. Finally, in limited clinical trials, we demonstrate that the approach can significantly improve the diagnostic accuracy of detection of microvascular changes in the skin of the feet in patients with Diabetes Mellitus type 2, as well as age-specific changes. The results obtained show that the developed approach of LDF signal decomposition provides essential new information about blood flow and blood microcirculation and has great potential in the diagnosis of vascular complications associated with various diseases.

Implantable Doppler Removal After Free Flap Monitoring Among Head and Neck Microvascular Surgeons.

OBJECTIVE: Investigate current practice patterns of head and neck microvascular reconstructive surgeons when removing an implantable Doppler after free flap surgery. STUDY DESIGN: Cross-sectional survey study. METHODS: Survey distributed to head and neck microvascular reconstructive surgeons. Data regarding years performing free tissue transfer, case numbers, management of implantable Doppler wire, and complications were collected. RESULTS: Eighty-five responses were analyzed (38,000 cases). Sixty-six responders (77.6%) use an implantable Doppler for postoperative monitoring, with 97% using the Cook-Swartz Doppler Flow Monitoring System. Among this group, 65.2% pull the wire after monitoring was complete, 3% cut the wire, and 31.8% have both cut and pulled the wire. Of those who have cut and pulled the wire, 48% report cutting and pulling the wire with equal frequency, 43% formerly pulled the wire and now cut the wire, and 9% previously cut the wire but now pull the wire. Of those who pull the wire, there were two injuries to the pedicle requiring return to the operating for flap salvage, and one acute venous congestion. Of the nine who previously pulled the wire, six (67%) cited concerns with major bleeding/flap compromise as the reason for cutting the wire. CONCLUSION: In this study, most surgeons use an implantable Doppler for monitoring of free flaps postoperatively. In extremely rare instances, pulling the implantable Doppler wire has resulted in flap compromise necessitating revision of the vascular anastomosis. Cutting the wire and leaving the proximal portion in the surgical site has been adopted as a management option. LEVEL OF EVIDENCE: 4 Laryngoscope, 132:554-559, 2022.

Noninvasive assessment of bowel blood perfusion using intraoperative laser speckle flowgraphy.

PURPOSE: Laser speckle flowgraphy (LSFG) is a noninvasive method for quantitative evaluation of blood flow using the mean blur rate (MBR) as the blood flow index. We investigated whether LSFG can intraoperatively detect the demarcation line after vessel dissection and reduce the incidence of anastomotic leakage (AL). METHODS: This study included 36 patients who underwent left-sided colorectal surgery. First, we compared the demarcation line (determined by LSFG) with the transection line (TL) at which the marginal vessels were divided. We then measured the MBR on both sides of the TL to determine where the MBR changed significantly. We investigated the presence or absence of significant differences between the MBR on the proximal side and that on the distal side of the TL. Finally, we retrospectively compared the patient characteristics and AL rates in the LSFG group (n = 36) and control group (n = 87). RESULTS: In total, 58.3% (21/36) of the demarcation lines determined by LSFG matched the TL. The median distance between the demarcation line determined by LSFG and the TL was 0.0 mm (0.0-12.1 mm). The MBR sharply decreased at the TL in 80.6% (29/36) of cases. The median MBR was significantly lower on the distal than proximal side. The AL rate was not significantly lower in the LSFG group than in the control group. CONCLUSION: LSFG accurately detected the demarcation line during surgery. However, LSFG did not reduce the incidence of AL.

Endothelial dysfunction assessed by digital tonometry and discrepancy between fraction flow reserve and instantaneous wave free ratio.

Background: We tested whether the level of endothelial dysfunction assessed by digital tonometry, and expressed as reactive hyperemia index (RHI), is related to occurrences of a discrepancy between fractional flow reserve (FFR) and the instantaneous wave free ratio (iFR) (ClinicalTrials.gov identifier: NCT03033810).Methods: We examined patients with coronary stenosis in the range of 40-70%, assessed by both FFR and iFR (system Philips-Volcano) for stable angina. We included consecutive patients with FFR and iFR in one native coronary artery, and who had had no previous intervention.Results: We included 138 patients. Out of those, 24 patients (17.4%) had a negative FFR (with an FFR value >0.8) and positive iFR (with a iFR value ≤0.89) - designated the FFRn/iFRp discrepancy group, and 22 patients (15.9%) had a positive FFR (≤0.8) and negative iFR (>0.89) - designated the FFRp/iFRn discrepancy. RHI was higher in the discrepancy groups compared the group without discrepancy (1.73 ± 0.79 vs. 1.48 ± 0.50, p = 0.025). However, this finding was not confirmed in multivariant logistic regression analyses. Patients with any type of discrepancy differed from the agreement group by having a higher occurrence of diabetes mellitus [9 patients (21.4%) vs. 36 patients (39.6%), p = 0.029], active smoking (23 patients or 54.8% vs. 26 patients or 28.6%, p = 0.003) and lower use of calcium channel blockers (9 patients, 21.4%, vs. 43 patients, 46.7%, p = 0.004).Conclusion: The presence of endothelial dysfunction can be associated with a discrepancy in FFR/iFR. However, RHI correlated with risk factors of atherosclerosis, not with FFR or iFR.

Retrospective evaluation of diagnostic accuracy of free flap monitoring with the Cook-Swartz-Doppler probe in head and neck reconstruction.

The Cook-Swartz-Doppler probe is an easy to handle and reliable tool for free flap monitoring. In the head and neck region different confounders can affect the read out. We therefore analyzed the use of the Doppler probe regarding these potential difficulties and to compare the diagnostic accuracy in arterial or venous monitoring of free flaps in the head and neck region. A retrospective study was performed in which all patients were included who underwent free flap surgery in the head and neck region in the Department of Plastic Surgery and the Department of Maxillofacial Surgery of our institution between 2010 and 2018 and were monitored with an implanted Doppler probe. 147 free tissue transfers were included. No significance was found for arterial and venous placement of the Doppler probe for sensitivity (artery 83.3%; vein 84.6%; p = 0.87), specificity (artery 89.2%; vein 96.1%; p = 0.17) and negative predictive value (artery 96.7%; vein 94.2%; p = 0.55). A better positive predictive value for placing the Doppler probe around the artery (82.7%) than the vein (61.1%) was found in our study (p = 0.056). The better positive predictive value in arterial monitoring suggests that this is the more reliable measuring method to assess flap perfusion in the head and neck region.

Validation of speed-resolved laser Doppler perfusion in a multimodal optical system using a blood-flow phantom.

The PeriFlux 6000 EPOS system combines diffuse reflectance spectroscopy (DRS) and laser Doppler flowmetry (LDF) for the assessment of oxygen saturation (expressed in percentage), red blood cell (RBC) tissue fraction (expressed as volume fraction, %RBC), and perfusion (%RBC × mm / s) in the microcirculation. It also allows the possibility of separating the perfusion into three speed regions (0 to 1, 1 to 10, and >10 mm / s). We evaluate the speed-resolved perfusion components, i.e., the relative amount of perfusion within each speed region, using a blood-flow phantom. Human blood was pumped through microtubes with an inner diameter of 0.15 mm. Measured DRS and LDF spectra were compared to Monte Carlo-simulated spectra in an optimization routine, giving the best-fit parameters describing the measured spectra. The root-mean-square error for each of the three speed components (0 to 1, 1 to 10, and >10 mm / s, respectively) when describing the blood-flow speed in the microtubes was 2.9%, 8.1%, and 7.7%. The presented results show that the system can accurately discriminate blood perfusion originating from different blood-flow speeds, which may enable improved measurement of healthy and dysfunctional microcirculatory flow.

A multipixel diffuse correlation spectroscopy system based on a single photon avalanche diode array.

The autocorrelation of laser speckles from coherent near infrared light is used for noninvasive estimates of relative changes in blood perfusion in techniques such as laser Doppler flowmetry (LDF) and diffuse correlation spectroscopy (DCS). In this study, a 2D array of single photon avalanche diodes (SPADs) was used to combine the strengths of multiple detectors in LDF with high light sensitivity in DCS. The system was tested on milk phantoms with varying detector fiber diameter (200 and 600 µm), source-detector fiber separation (4.6-10.2 mm), fiber-SPAD distance (2.5-36.5 mm), contiguous measurement time per repetition for the autocorrelation (1-33 ms) and temperature (15.6-46.7°C). An in vivo blood occlusion test was also performed. The multipixel approach improved signal-to-noise ratio (SNR) and, in our setup, the use of a multimode detector fiber was beneficial for SNR. In conclusion, the multipixel system works, but improvements and further studies regarding, for example, the data acquisition and optimal settings are still needed.

Choosing a laser for laser speckle contrast imaging.

The use of laser speckle contrast imaging (LSCI) has expanded rapidly for characterizing the motion of scattering particles. Speckle contrast is related to the dynamics of the scattering particles via a temporal autocorrelation function, but the quality of various elements of the imaging system can adversely affect the quality of the signal recorded by LSCI. While it is known that the laser coherence affects the speckle contrast, it is generally neglected in in vivo LSCI studies and was not thoroughly addressed in a practical matter. In this work, we address the question of how the spectral width of the light source affects the speckle contrast both experimentally and through numerical simulations. We show that commonly used semiconductor laser diodes have a larger than desired spectral width that results in a significantly reduced speckle contrast compared with ideal narrow band lasers. This results in a reduced signal-to-noise ratio for estimating changes in the motion of scattering particles. We suggest using a volume holographic grating stabilized laser diode or other diodes that have a spectrum of emitted light narrower than ≈1 nm to improve the speckle contrast.

A prototype system of portable laser speckle imager based on embedded graphics processing unit platform.

Laser speckle contrast imaging (LSCI) is a high-resolution full-field optical technique for measuring blood flow, which has been widely used in clinical and biomedical research. However, most of the current LSCI instruments are bulky, limiting their application settings. In this work, we proposed a prototype system of portable laser speckle imager. Different from the desktop laser speckle systems that utilize personal computer (PC), our system was designed with embedded GPU system (Jetson TX2, NVIDIA, USA) and a LCD touch screen (16.5 × 12.4 cm in size, 380 g in weight). In-vivo experiments showed that the portable GPU-based system had comparable performance with our laboratory LSCI system. Such a portable LSCI imager could be potentially used in a situation that requires for easy operation and installation, such as intraoperative monitoring or bedside diagnosis.

Continuous Blood Pressure Monitoring Algorithm using Laser Doppler Flowmetry.

A novel machine learning algorithm is introduced to estimate continuous blood pressure monitoring using Laser Doppler Flowmetry (LDF). LDF provides instantaneous, continuous, and noninvasive measurements of blood flow in a small tissue sample. The proposed algorithm segments the continuous blood flow profile based on heartbeat cycles to subsequently extract multiple features. The beat-to-beat blood pressure was estimated from a multi-layer neural network algorithm using the extracted features. The algorithm was also validated with clinically proven cuff based continuous blood pressure sensors. Mean average error values of 4.54 \sim5.37 mmHg were observed, which conform to a Grade B/C category per the IEEE standard 1708-2014 for cuffless blood pressure measuring devices.

Utilidad de la flujometría doppler en pacientes preeclámpticas con restricción de crecimiento intrauterino / Usefulness of doppler flowmetry in preeclamptic patients with intrauterine grow restriction

Introducción: La flujometría doppler constituye un método de control y evaluación para determinar la culminación de la gestación, permite entender de una mejor manera la dinámica fetoplacetaria lo que posibilita evitar todo riesgo que pueda dañar la maduración fetal, y a su vez la prematuridad, bajo peso al nacer y patologías de la preeclampsia. Objetivo: Determinar la utilidad de la flujometría doppler color, en el diagnóstico y manejo de la restricción de crecimiento intrauterino en embarazadas preeclámpticas. Métodos: Se realizó un estudio no experimental, transversal, de tipo descriptivo comparativo en el departamento de ecografía de la clínica Bolívar, Babahoyo - Ecuador durante el año 2013. Participaron 96 mujeres gestantes en edades entre 15 a 40 años, a las que se le realizó las intervenciones: Flujometría doppler, prueba de índice cerebro placentario, arteria cerebral media/arteria umbilical; para el análisis se emplearon los indicadores descriptivos entre las variables. Resultados: La prueba de índice cerebro placentario fue descompensada en el 53,1 por ciento de las mujeres, el volumen de líquido amniótico estuvo disminuido en el 46,9 por ciento, y la edad gestacional más vulnerable fue de las 32 a las 37 semanas de gestación. Conclusiones: La flujometría doppler con la prueba índice cerebro placentario es un indicador efectivo y seguro de bienestar fetal cuando esta prueba es normal, y un predictor de resultado adverso, así como un marcador de hipoxia fetal cuando está alterado, convirtiéndose en una herramienta útil para la decisión de interrumpir la gestación cuando la salud del feto está en peligro, o de mantener el embarazo cuando su comportamiento es normal(AU)

Adaptable switching schemes for time-encoded multichannel optical coherence tomography.

We introduce the approach of variable time encoding for multichannel optical coherence tomography (OCT). High-speed fiber optical switches are applied for sequential sample arm switching to enable quasisimultaneous image acquisition from three different orientation angles. In comparison with previous multichannel OCT (using simultaneous sample illumination), time-encoded multichannel OCT has no need for division of illumination power among the respective channels to satisfy laser safety requirements. Especially for ophthalmic applications-in particular retinal imaging, which the presented prototype was developed for-this advantage strongly influences image quality through an enhanced sensitivity. Nevertheless, time encoding comes at the cost of a decrease in imaging speed due to sequential channel illumination. For the typical multichannel OCT modality Doppler OCT, this results in a reduction of the maximum unambiguously determinable Doppler velocity. However, we demonstrate that this drawback can be overcome by adaptation of the illumination channel switching scheme. Thus, a re-extension of the maximum unambiguously determinable Doppler frequency to the full A-scan rate of the tunable light source is presented. The performance of the technique is demonstrated by flow phantom experiments and measurements of retinal blood flow in the eyes of healthy human volunteers.

Processing methods for photoacoustic Doppler flowmetry with a clinical ultrasound scanner.

Photoacoustic flowmetry (PAF) based on time-domain cross correlation of photoacoustic signals is a promising technique for deep tissue measurement of blood flow velocity. Signal processing has previously been developed for single element transducers. Here, the processing methods for acoustic resolution PAF using a clinical ultrasound transducer array are developed and validated using a 64-element transducer array with a -6 dB detection band of 11 to 17 MHz. Measurements were performed on a flow phantom consisting of a tube (580 µm inner diameter) perfused with human blood flowing at physiological speeds ranging from 3 to 25 mm / s. The processing pipeline comprised: image reconstruction, filtering, displacement detection, and masking. High-pass filtering and background subtraction were found to be key preprocessing steps to enable accurate flow velocity estimates, which were calculated using a cross-correlation based method. In addition, the regions of interest in the calculated velocity maps were defined using a masking approach based on the amplitude of the cross-correlation functions. These developments enabled blood flow measurements using a transducer array, bringing PAF one step closer to clinical applicability.

Laser Doppler sensing for blood vessel detection with a biologically inspired steerable needle.

Puncturing blood vessels during percutaneous intervention in minimally invasive brain surgery can be a life threatening complication. Embedding a forward looking sensor in a rigid needle has been proposed to tackle this problem but, when using a rigid needle, the procedure needs to be interrupted and the needle extracted if a vessel is detected. As an alternative, we propose a novel optical method to detect a vessel in front of a steerable needle. The needle itself is based on a biomimetic, multi-segment design featuring four hollow working channels. Initially, a laser Doppler flowmetry probe is characterized in a tissue phantom with optical properties mimicking those of human gray matter. Experiments are performed to show that the probe has a 2.1 mm penetration depth and a 1 mm off-axis detection range for a blood vessel phantom with 5 mm s-1 flow velocity. This outcome demonstrates that the probe fulfills the minimum requirements for it to be used in conjunction with our needle. A pair of Doppler probes is then embedded in two of the four working channels of the needle and vessel reconstruction is performed using successive measurements to determine the depth and the off-axis position of the vessel from each laser Doppler probe. The off-axis position from each Doppler probe is then used to generate a 'detection circle' per probe, and vessel orientation is predicted using tangent lines between the two. The vessel reconstruction has a depth root mean square error (RMSE) of 0.3 mm and an RMSE of 15° in the angular prediction, showing real promise for a future clinical application of this detection system.

Pulpal blood flow recorded from exposed dentine with a laser Doppler flow meter using red or infrared light.

OBJECTIVE: To determine the percentage of the blood flow signal that is derived from dental pulp when recording from exposed dentine in a human premolar. DESIGN: Recordings were made from 7 healthy teeth in 5 subjects (aged 22-33 yr.) with a laser Doppler flow meter (Periflux 4001) using either a red (635 nm) or an infrared (780 nm) laser. After exposing dentine above the buccal pulpal horn (cavity diam. 1.6 mm, depth 3 mm) and isolating the crown with opaque rubber dam, blood flow was recorded alternately with infrared or red light from the exposed dentine under four conditions: before and after injecting local anaesthetic (3% Mepivacaine without vasoconstrictor) (LA) over the apex of the root of the tooth; after exposing the pulp by cutting a buccal, class V cavity in the tooth; and after sectioning the coronal pulp transversely through the exposure. RESULTS: There was no significant change in mean blood flow recorded with either light source when the tooth was anaesthetized or when the pulp was exposed. After the pulp had been sectioned, the blood flow recorded with infrared light fell by 67.8% and with red light, by 68.4%. The difference between these effects was not significant. CONCLUSIONS: When recording blood flow from exposed coronal dentine with either infrared or red light in a tooth isolated with opaque rubber dam, about 68% to the signal was contributed by the pulp. The signal:noise ratio was better with infrared than red light, and when recording from dentine than enamel.

Oesophageal mucosal blood flow changes after thoracic endovascular stent graft implantation using a novel sensor probe.

OBJECTIVES: Secondary aorto-oesophageal fistula is a rare, lethal complication occurring after thoracic endovascular aneurysmal repair. The cause of secondary aorto-oesophageal fistula is unknown, but a reduction in local oesophageal mucosal blood flow (OMBF) may be a basis for such a devastating sequela. Our study aims to develop a novel blood flow sensor probe to detect changes in OMBF after thoracic stent graft implantation in an experimental swine model. METHODS: A novel laser Doppler flowmetry sensor probe incorporating an optical fibre sensor within a nasogastric tube was developed using microelectromechanical system technology. OMBF was measured at various levels using this sensor probe, to test its feasibility before and after thoracic endovascular stent graft implantation covering Th4-Th8 vertebral levels in 6 swine. RESULTS: In the middle oesophagus (Th5-Th7), where the aorta was covered with a stent graft, the measured OMBFs were significantly decreased after thoracic endovascular stent graft implantation than those of baseline (8.6 ± 2.7 vs 18.4 ± 7.9 ml/min/100 g, P < 0.0001), followed by a plateau period for at least 2 h after stent grafting (8.7 ± 3.3 ml/min/100 g, P < 0.0001 vs baseline). OMBFs in the upper (Th1-Th3) and lower (Th9-Th11) oesophagus, where the aorta was not covered with a stent graft, were unaffected by thoracic endovascular stent grafting. CONCLUSIONS: The novel laser Doppler flowmetry sensor probe was useful to monitor precise changes of OMBF in a swine model, demonstrating a significant reduction in OMBF after thoracic endovascular stent graft implantation.

Repeatability and Reproducibility of Retinal Blood Flow Measurement Using a Doppler Optical Coherence Tomography Flowmeter in Healthy Subjects.

Purpose: To evaluate the repeatability and reproducibility of retinal blood flow (RBF) measurements in humans by using new auto-alignment and measurement software in a commercially available Doppler optical coherence tomography (DOCT) system. Methods: The DOCT flowmeter assessed the intrasession repeatability and the intersession and interobserver reproducibility of the RBF measurements. For intrasession repeatability, the coefficients of variation (CVs) of five repeated RBF measurements were calculated at the retinal arteries and veins in 20 normal eyes of 20 healthy volunteers. For intersession reproducibility, two sets of three measurements obtained by one observer on 2 different days were compared. For interobserver reproducibility, two sets of three measurements obtained by two observers on the same day were compared. Intraclass correlation coefficients (ICCs) also were used to evaluate the repeatability and reproducibility. The relevance of the DOCT flowmeter and laser Doppler velocimetry (LDV) also was assessed. Results: Regarding intrasession repeatability, the ICC of the RBF exceeded 0.90 in arterioles and venules (ICC: 0.994 and 0.970, respectively). The CVs of the RBF in the arterioles and venules were 6.0% ± 3.4% and 8.8% ± 5.1%, respectively. The intersession and interobserver RBF values had high reproducibility in the arterioles (ICC: 0.980 and 0.993, respectively) and venules (ICC: 0.982 and 0.986, respectively). The RBF measured with the DOCT flowmeter was correlated strongly with LDV in the arterioles (r = 0.76; P < 0.001). Conclusions: The DOCT flowmeter had good reproducibility in the arterioles and venules and precisely measured the RBF as compared to the LDV in the arterioles.