Efficacy of calcium hypochlorite in disinfection of gutta-percha cones contaminated with Candida albicans.

This study aimed to compare the efficacy of 2.5% sodium hypochlorite (NaOCl), 2.5% calcium hypochlorite [Ca(OCl)2], and 2% chlorhexidine (CHX) in the rapid disinfection of gutta-percha cones contaminated with Candida albicans. The minimum inhibitory and minimum fungicidal concentrations of each solution for C. albicans were determined and the ability of each solution to destroy and inhibit biofilm in culture wells was tested. In addition, ninety-eight gutta-percha cones contaminated with the fungal suspension were disinfected according to the type of solution (2.5% NaOCl, 2.5% Ca(OCl)2 or 2% CHX) in its different application methods (without agitation, ultrasonic agitation or agitation with Easy Clean), and regarding the exposure time to each irrigating solution (1 or 5 min). Next, the samples were checked for turbidity and evaluation of viable colonies. The compounds that showed the best performance in biofilm destruction were NaOCl and Ca(OCl)2 at a concentration of 2xMIC (p < 0.001). Regarding inhibited biofilm, the only compound that was effective at all MIC concentrations tested was 2.5% Ca(OCl)2 (p < 0.0001). Regarding the viable colonies, all solutions were effective concerning the control group, for all application methods, in 1 and 5 min (p < 0.05). The densitometer reading showed that CHX was the only effective solution in all application methods performed (p < 0.05). The results demonstrate that all tested solutions were effective in the rapid decontamination of cones contaminated with C. albicans.

Antimicrobial efficacy of acacia Nilotica (Babul) extract and its effectiveness in disinfecting gutta percha cones - An in vitro study.

BACKGROUND: Gutta-percha cones used directly from the manufacturer's sealed packs harbour micro-organisms. During clinical use, the chances of contamination of gutta-percha increases. Hence, disinfection of gutta-percha cones before use is essential to prevent canal recontamination. AIM: To evaluate the antimicrobial efficacy of babul against chemical disinfectants, and its effectiveness in disinfecting gutta-percha cones. MATERIALS AND METHODS: The extract of babul was used to assess its antimicrobial activity against E-faecalis, S. aureus and C. albicans using the agar diffusion method. A total of 120 cones acquired from freshly opened manufacturers' pack were cut into three equal parts and divided into group I which was directly placed into a nutrient broth, group II was clinically contaminated with gloves for 30 s and placed into a nutrient broth, and the third part was clinically contaminated with gloves and decontaminated for 5 min using the experimental disinfectants to check for the presence of turbidity. STATISTICAL ANALYSIS: The data were analysed by an Unpaired t-test and Chi-square test at a significance level of P < 0.05 using software SPSS 20. RESULTS: Two percent chlorhexidine showed maximum antibacterial action against E. faecalis and S. aureus followed by babul extract. It was also found more efficacious in decontaminating gutta-percha cones followed by babul and 3% sodium hypochlorite in 5 min. CONCLUSION: Babul herbal extract is indeed effective in decontaminating gutta-percha cones and is a better alternative to chemical disinfectants.

The use of solvents for gutta-percha dissolution/removal during endodontic retreatments: A scoping review.

This scoping review study aimed to map the evidence about solvents' use for gutta-percha dissolution and removal during endodontic retreatments. The study protocol followed the Joanna Briggs Institute guidelines, available online (https://osf.io/5vy8n/). Reporting was based on PRISMA Extension for Scoping Reviews. We selected dentistry studies that considered the effectiveness of solvents in gutta-percha dissolution in endodontic retreatments and compared their performance to the use of instrumentation techniques without solvents. The search and study screening were performed in PubMed and Scopus databases by two independent researchers. A descriptive analysis considered the study design, method/technique used for obturation, method/technique used for instrumentation during retreatment, solvent solutions tested, exposure time, and main findings. A total of 41 studies were included. Despite that, most studies suggested that solvents' use may complicate root canal cleanliness, regardless of the type of instrumentation used, and facilitate the presence of gutta-percha remnants in the root surface. Thus, the use of solvents should be avoided and its use should only be considered if the previous working length was not possible to access without it. Despite that, high heterogeneity was observed, further studies are still encouraged comparing the performance and effects of different solvents in different clinical scenarios.

GuttaFlow® Bioseal Cytotoxicity Assessment: In Vitro Study.

The sealers used for root canal treatment should be biocompatible for the peri-radicular tissues, to evaluate the cytotoxic effects of GuttaFlow® bioseal sealer and to compare them with AH26® epoxy resin. Culture media were conditioned with the GuttaFlow® bioseal and AH26® pellets. MDPC-23 odontoblast cell cultures were treated with conditioned medium and serial dilutions. To evaluate the metabolic activity and cellular viability, the MTT and SRB assays were performed. To determine the production of reactive oxygen species, the DHE and DCF-DA probes were used. Cell cycle and cell-death types were assessed by cytometry, and to evaluate the mineralization capacity, the Alizarin Red S coloration was used. Statistical analysis was performed using analysis of variance (ANOVA) when normality was found and Kruskal-Wallis on the opposite case. For the comparison with normality values, the Student t-test was used. Cells exposed to the GuttaFlow® bioseal conditioned medium maintained high metabolic activities, except at higher concentrations. Likewise, viability was maintained, but a significant decrease was observed after exposure to the highest concentration (p < 0.001), associated with cell death by late apoptosis and necrosis. When cell cultures were exposed to AH26®, metabolic activity was highly compromised, resulting in cell death. An imbalance in the production of peroxides and superoxide anion was observed. GuttaFlow® bioseal showed higher biocompatibility than AH26®.

Immunoinflammatory response and bioactive potential of GuttaFlow bioseal and MTA Fillapex in the rat subcutaneous tissue.

To evaluate the effect of GuttaFlow bioseal (GFB) and MTA Fillapex (MTAF) in comparison with Endofill (EF) in the subcutaneous tissue. Polyethylene tubes with GFB, MTAF, EF or empty tubes (control group; CG) were implanted into subcutaneous of rats. After 7, 15, 30 and 60 days, the capsule thickness, inflammatory reaction, interleukin-6 (IL-6), vascular endothelial growth factor (VEGF), caspase-3, TUNEL-positive cells, von Kossa and ultrastructural features were evaluated. The data were statistically analyzed (p ≤ 0.05). At all periods, the number of IL-6- and VEGF-immunolabelled cells, and capsule thickness were lower in GFB than MTAF, which was lower than EF (p < 0.0001). At 60 days, the number of inflammatory cells was similar in GFB and MTAF (p = 0.58). Significant differences in the number of TUNEL- and caspase-3-positive cells were not observed among GFB, MTAF and CG whereas the highest values were found in EF specimens. The EF specimens exhibited several cells with condensed chromatin, typical of apoptosis. von Kossa-positive and birefringent structures were only observed in GFB and MTAF, suggesting the presence of calcite crystals. Taken together, these results show that cellular and structural damage induced by GFB and MTAF sealers were recovery over time. Moreover, these sealers express bioactive potential in subcutaneous tissue.

Presence of voids after warm vertical compaction and single-cone obturation in band-shaped isthmuses using micro-computed tomography: A phantom study.

The present micro-computed tomography (micro-CT) study compared the presence of voids in the band-shaped isthmuses obturated by warm vertical compaction (WVC) and single-cone (SC) techniques. Twenty mesial roots from mandibular first molar teeth showing a band-shaped isthmus were selected and assigned into two groups based on their preoperative anatomical dimensions (n = 10), according to the filling technique: WVC or SC. Post-filling micro-CT scanning was performed. The percentage volume of root canal filling materials and voids were calculated and data were analyzed using the Mann-Whitney U test with a significance level of 5 and 95% confidence interval. Mean percentage volumes of filling materials and voids were 86.88 ± 8.53 and 13.11 ± 8.53 for the WVC group, 84.39 ± 8.30 and 15.60 ± 8.30 for the SC group, respectively, with no significant difference between them (p > .05). Neither WVC nor SC produced void-free root canal fillings in the band-shaped isthmuses and both techniques resulted in a similar quality of root canal filling.

Bond strength and solubility of a novel polydimethylsiloxane-gutta-percha calcium silicate-containing root canal sealer.

BACKGROUND: Endodontic sealers are essential for sealing gutta-percha to the dentin walls. They help to ensure that the canal remains free of microorganisms which might lead to infection. In order to perform their intended function, the sealers should properly adhere to the dentin walls and remain insoluble when set in the canal. OBJECTIVES: The purpose of this study was to evaluate the bond strength and solubility of a novel polydimethylsiloxane-gutta-percha calcium silicate-containing root canal sealer (GuttaFlow® bioseal) and compare it with the zinc oxide and eugenol sealer (Zical®). MATERIAL AND METHODS: The endodontic sealers used in this study were GuttaFlow bioseal and Zical. The bond strength was assessed using push-out bond strength test in 3 root segments: coronal, middle and apical. The solubility was tested according to the American National Standards Institute / American Dental Association (ANSI/ADA) specification No. 57 at 3 different time intervals: 1, 7 and 14 days. RESULTS: The push-out bond strength in all root segments was significantly higher in Zical compared to GuttaFlow bioseal. The solubility was significantly higher on day 1 and 7 in Zical compared to GuttaFlow bioseal, and on day 14, the difference between them was not significant. CONCLUSIONS: Within the limitations of this study, the endodontic sealer GuttaFlow bioseal showed low bond strength values compared to Zical. The solubility of the set GuttaFlow bioseal and Zical were both within the recommended ANSI/ADA levels.

Influence of final irrigation protocols and endodontic sealer on bond strength of root filling material with root dentin previously treated with photodynamic therapy.

INTRODUCTION: The aim of this study was to evaluate the influence of final irrigation protocols and endodontic sealer on bond strength of root filling material on root dentin previously treated with photodynamic therapy (PDT). METHODS: One hundred root canals were prepared up to #F3 file of Pro-Taper system to receive the root filling material. All samples were submitted to PDT and randomly divided into five groups (n = 20) according to final irrigation protocols: Group 1-distilled water + ultrasonic activation (US); Group 2-17% EDTA; Group 3-QMix; Group 4-17% EDTA + US; Group 5-QMix + US. Each group was randomly divided into two subgroups (n = 10), according to the endodontic sealer used for cementation of gutta-percha points: AH Plus or MTA Fillapex. The bond strength was evaluated by a push-out test. The patterns of failure were observed under optical microscopy. The bond strength was evaluated using a two-way Anova followed by the Tukey post-hoc test, and the failure mode was evaluated using the chi-square test (α = 5%). RESULTS: The use of 17% EDTA and QMix associated or not to US improved the bond strength of root filling material with either endodontic sealer (p < 0.05). AH Plus showed higher bond strength than MTA Fillapex (p < 0.05). There was a higher predominance of cohesive failure in all groups, regardless of the tested final irrigation protocols and endodontic sealer (p < 0.05). CONCLUSIONS: The use of 17% EDTA and QMix, regardless of association with US, and the use of AH Plus improve the bond strength of the root filling material on root dentin previously treated with PDT.

Effect of chitosan nanoparticle, QMix, and EDTA on TotalFill BC sealers' dentinal tubule penetration: a confocal laser scanning microscopy study.

The aim of the present study was to compare the effect of chitosan nanoparticle, QMix, and 17% EDTA on the penetrability of a calcium silicate-based sealer into dentinal tubules using a confocal laser scanning microscope (CLSM). Sixty mandibular premolar teeth were selected and randomly divided into three groups (n = 20) before root canal preparation according to the solution used in the final rinse protocol: chitosan, QMix, and EDTA groups. Twenty teeth of each group were filled with a TotalFill BC sealers' single gutta-percha cone and with 0.1% rhodamine B. The specimens were horizontally sectioned at 3 and 5 mm from the apex, and the slices were analyzed in CLSM (4×). Total percentage and maximum depth of sealer penetration were measured using confocal laser scanning microscopy with using Image J analysis software. Dentinal tubule's penetration depth, percentage, and area were measured using imaging software. Kruskal-Wallis test was used for statistical analysis. The level of significance was set at 5%. Results of Kruskal-Wallis analysis showed that there was a significant difference in the percentage and depth of sealer penetration among all groups at 3 and 5 mm level sections (P < 0.05). Within the groups, the minimum sealer penetration depth was recorded for chitosan nanoparticle group. Greater depth of sealer penetration was recorded at 5 mm as compared to 3 mm in all the groups. Within the limitation of the present study, it can be concluded that QMix and EDTA promoted sealer penetration superior to that achieved by chitosan nanoparticle.

Detection of Vertical Root Fractures Using Cone-Beam Computed Tomography in the Presence and Absence of Gutta-Percha.

BACKGROUND: Vertical root fractures (VRFs) can significantly reduce dental prognosis. Cone-beam computed tomography (CBCT) offers better visualization of VRF than conventional radiography. However, gutta-percha creates artifacts in cone-beam CT (CBCT) images and reduces the diagnosis quality. The purpose of this study was to evaluate the accuracy of CBCT in detection of VRF in presence and absence of gutta-percha in canals. MATERIALS AND METHODS: In this cross-sectional study, 50 extracted mandibular premolars were selected. After preparing the access cavity, canals were instrumented using step-back method, and gutta-percha #40 was placed afterwards. The fractures were created using electromechanical universal testing machine on 25 teeth. The teeth were randomly placed in dry mandibular dental sockets, and the first CBCTs were taken. Then the gutta-percha was removed, and the second CBCTs were taken. RESULTS: The results of Kappa coefficient between two observers in roots with and without gutta-percha were 0.644 and 0.830, respectively (p value ≤ 0.001). The sensitivity and specificity of VRF diagnosis in assessing gutta-percha filled canals were 32% and 68% for the first observer, respectively (Kappa < 0.000, p value = 1.000), and 40% and 68% for the second observer, respectively (Kappa = 0.080, p value = 0.556). The sensitivity and specificity of VRF diagnosis in assessing the empty canals (without gutta-percha) were 72% and 96% for the first observer, respectively (Kappa = 0.680, p value ≤ 0/001), and 72% and 96% for the second observer, respectively (Kappa = 0.680, p value ≤ 0/001). CONCLUSION: The intracanal filling materials such as gutta-percha reduce the diagnostic ability of vertical root fractures. Hence, it is recommended to remove those materials from root canals before imaging to improve the diagnostic potential of CBCT.

Novel endodontic sealers induced satisfactory tissue response in mice.

OBJECTIVES: The aim of this study was to evaluate the subcutaneous response induced by Roeko Guttaflow2 (RG), Sealapex Xpress (SX), AH Plus (AHP) sealers. METHODS: 100 BALB/c mice received implants in the subcutaneous tissue with the tested materials (10 animals per period for each evaluated sealer) and were evaluated after different experimental periods (7, 21 and 63 days), in each animal was placed a tube, the control group was an empty tube. Histological analysis evaluated semi-quantitatively the inflammatory infiltration, collagen fiber formation and tissue thickness. In addition, immunohistochemistry was performed for interleukin-6 (IL-6). Data were statistically analyzed (α = 0.05). RESULTS: RG promoted a greater collagen fiber formation at 7 days and 63 days compared to the CG (p = 0.004) and AHP (p = 0.005) respectively, while at 21 days, the SX promoted a greater reaction (p = 0.021). For the tissue thickness, there was a greater reaction at 7 days with CG (p = 0.0156) and with RG at 63 days (p = 0.03). Regarding the inflammatory infiltrate, there was no difference at 7 days and 63 days (p = 0.5; p = 0.27), while at 21 days, a statistically difference was found between SX, CG (p = 0.04) and RG (p = 0.027). In addition, the presence of IL-6 was observed in almost all groups, with a more intense marking at 7days. SIGNIFICANCE: All cements evaluated presented a satisfactory tissue response, however, RG was the one that presented a more satisfactory tissue response.

Antimicrobial Efficacy of Materials Used for Sealing the Implant Abutment Screw Hole: An In Vitro Evaluation.

AIM: The aim of this in vitro study was to assess the antimicrobial efficacy of materials (gutta percha [GP], polytetrafluoroethylene [PTFE] tape, and vinyl polysiloxane [VP]) used for sealing the implant abutment screw hole (IASH). METHODS: Sixty implants with a Morse cone connection were used. The implants were randomly divided into 3 groups (20 implants/group). In groups 1, 2, and 3, the IASH was sealed with GP, PTFE, and VP, respectively. Unstimulated whole saliva (UWS) was used as a contaminant medium for the incubation of the specimens. After 7 days of incubation, the specimens were opened under aseptic conditions, and the contents of the inner parts of the IASH were collected using sterile microbrushes. The occurrence of microbial leakage through the screw access channel interface was assessed with the checkerboard DNA-DNA hybridization method. P < 0.05 was considered statistically significant. RESULTS: Among samples in groups 1, 2, and 3, the UWS collected before incubation showed no statistically significant differences in relation to the prevalence of species investigated. Aggregatibacter actinomycetemcomitans, Porphyromonas gingivalis, Treponema denticola, Tannerella forsythia, and Candida albicans were isolated from group 1 than groups 2 and 3. CONCLUSION: The choice of material for sealing the IASH is entirely dependent on the operators' choice and experience.

Semiconductor laser irradiation improves root canal sealing during routine root canal therapy.

OBJECTIVE: To evaluate the effect of semiconductor laser irradiation on root canal sealing after routine root canal therapy (RCT). METHODS: Sixty freshly extracted single-rooted human teeth were randomly divided into six groups (n = 10). The anatomic crowns were sectioned at the cementoenamel junction and the remaining roots were prepared endodontically with conventional RCT methods. Groups A and B were irradiated with semiconductor laser at 1W for 20 seconds; Groups C and D were ultrasonically rinsed for 60 seconds as positive control groups; Groups E and F without treatment of root canal prior to RCT as negative control groups. Root canal sealing of Groups A, C and E were evaluated by measurements of apical microleakage. The teeth from Groups B, D and F were sectioned, and the micro-structures were examined with scanning electron microscopy (SEM). One way ANOVA and LSD-t test were used for statistical analysis (α = .05). RESULTS: The apical sealing of both the laser irradiated group and the ultrasonic irrigated group were significantly different from the control group (p<0.5). There was no significant difference between the laser irradiated group and the ultrasonic irrigated group (p>0.5). SEM observation showed that most of the dentinal tubules in the laser irradiation group melted, narrowed or closed, while most of the dentinal tubules in the ultrasonic irrigation group were filled with tooth paste. CONCLUSION: The application of semiconductor laser prior to root canal obturation increases the apical sealing of the roots treated.

Furcation Perforation: Periradicular Tissue Response to Biodentine as a Repair Material by Histopathologic and Indirect Immunofluorescence Analyses.

INTRODUCTION: The purpose of this study was to evaluate the in vivo response of periradicular tissues after sealing of furcation perforations with Biodentine, mineral trioxide aggregate (MTA), and gutta-percha by means of histopathologic and indirect immunofluorescence analyses. METHODS: Thirty teeth of 3 dogs were divided into 3 groups: Biodentine (n = 14 teeth), MTA (negative control, n = 10 teeth), and gutta-percha (positive control, n = 6 teeth). After endodontic treatment, perforations were made on the center of the pulp chamber floor and filled with the materials. After 120 days, the animals were killed, and blocks containing the teeth and periradicular tissues were processed histotechnically for histopathologic semiquantitative (new mineralized tissue formation and bone resorption at the perforation site) and quantitative (thickness and area of newly formed mineralized tissue and number of inflammatory cells) analyses and RUNX2 immunofluorescence assay. Data were analyzed by χ2, Fisher exact test, Mann-Whitney test, one-way analysis of variance, Kruskal-Wallis test, and Dunn posttest (α = 0.05). RESULTS: MTA and Biodentine induced the formation of significantly more new mineralized tissue (P < .0001) than gutta-percha, which did not induce the formation of mineralized tissue in any case. Complete sealing of the perforations was more frequent with MTA, which formed mineralized tissue with greater thickness and area. Biodentine and MTA exhibited no bone resorption in the furcation region, fewer inflammatory cells, and greater RUNX2 immunostaining intensity than gutta-percha. CONCLUSIONS: Although MTA presented higher frequency of complete sealing and greater thickness and area of newly formed mineralized tissue, Biodentine also had good histopathologic results and can be considered as an adequate furcation perforation repair material.

Effect of MTA particle size on periapical healing.

AIM: To examine the effect of reduction in MTA particle size on dento-alveolar and osseous healing in dogs. METHODOLOGY: Root canals of 24 mandibular premolars in four 2-year-old beagles were prepared and filled with gutta-percha and sealer. Two to four weeks later, during periapical surgery, the root-end cavity preparations in these teeth were filled with either grey ProRoot MTA or modified (reduced particle sizes with faster setting time) MTA. The animals were sacrificed 4 months later. Degrees of inflammation, type of inflammatory cells, fibrous connective tissue adjacent to the root-end filling materials, cementum formation over the resected roots and root-end filling materials and bone healing were examined. Data were analysed using the McNemar test. RESULTS: No significant differences in healing of periapical tissues were found when comparing ProRoot MTA to a modified MTA containing reduced particle sizes. CONCLUSION: Reducing the particle sizes of MTA did not impact its biological properties.

Antimicrobial influence of different root canal filling techniques in experimentally infected human root canals.

OBJECTIVE: The aim of the present study was to evaluate the antimicrobial influence of different root canal filling techniques using gutta-percha and an epoxy resin-based sealer in experimentally infected root canals of extracted human teeth. METHOD AND MATERIALS: In total, 96 intact sterilized, permanent human anterior teeth and premolars with single patent root canals were prepared and infected with a clinical isolate of Enterococcus faecalis. After 72 hours, all root canals were sampled using three sterile paper points. The tooth specimens were randomly divided into three groups and a control of 24 specimens each, according to the respective obturation techniques: lateral condensation (LC group), ProTaper Thermafil (PT group), and vertical compaction technique (VC group). AH Plus was used as sealer. The control group was left untreated (without root canal filling). After 7 days root canal fillings were removed and collected. The root canals were sampled using three sterile paper points and dentin chips were obtained from the root canal walls. The samples were cultured on blood agar, and colony forming units were counted. RESULTS: All root canal filling techniques significantly reduced bacterial viability, eliminating more than 99.9% of E faecalis. In the LC group, three (13%) root canals were culture negative. In the PT group, 21 (88%) root canals and in the VC group 15 (54%) were culture negative. CONCLUSION: All root canal filling techniques significantly reduced E faecalis in root canals. In cases where warm filling techniques can be applied, these should be preferred to cold obturation.

Cytocompatibility of calcium silicate-based sealers in a three-dimensional cell culture model.

OBJECTIVES: The aim of the present study was to evaluate cytotoxic effects and cytokine production of calcium silicate-based sealers (EndoSeal, EndoSequence BC Sealer, and MTA Fillapex) using an in vitro root canal filling model and three-dimensional (3D) cell culture. AH Plus as a reference was compared to contemporary calcium silicate cements regarding cell viability and cytokine production. MATERIAL AND METHODS: Root canals of 30 human maxillary incisors were prepared using a single-file reciprocating technique. The samples were randomly distributed and canals filled with either AH Plus, EndoSeal, EndoSequence BC Sealer, and MTA Fillapex (n = 6). In the negative control group, the root canal remained unfilled. Sealers were placed into the canals along with a gutta-percha cone placed to working length. Balb/c 3T3 fibroblasts, cultured in a type I collagen 3D scaffold, were exposed to filling material and the respective root apex for 24 h. Cytocompatibility of the materials was evaluated using the methyl-thiazoldiphenyl-tetrazolium (MTT) assay. The production of IL-1ß, IL-6, and IL-8 was analyzed using enzyme-linked immunosorbent assay (ELISA). One-way analysis of variance was performed, and when the F-ratios were significant, data were compared by Duncan's multiple-range test. The alpha-type error was set at 0.05. RESULTS: EndoSeal, Endosequence BC Sealer and AH Plus showed cell viability that was similar to the negative control group (P > 0.05), while MTA Fillapex sealer was cytotoxic (P < 0.05). Varying production of IL-1ß, IL-6, and IL-8 was detected in all samples. CONCLUSIONS: In an in vitro root canal filling model with 3D cell culture, AH Plus, EndoSeal, and EndoSequence BC Sealer were cytocompatible. CLINICAL RELEVANCE: These results may suggest that AH Plus, EndoSeal and EndoSequence BC Sealer may achieve better biological response when compared to MTA Fillapex.

An Evaluation of GuttaFlow2 in Filling Artificial Internal Resorption Cavities: An in vitro Study.

INTRODUCTION: Obturation of root canal with internal resorption represents a major challenge in Endodontics. In spite of that, usual obturation techniques are often employed without considering the best technique to solve this problem. The goal of this study was to investigate the ability of GuttaFlow2 in filling artificial internal resorption cavities. MATERIALS AND METHODS: The study sample included 36 human upper central incisors that were prepared using Protaper system (F4). Internal resorption cavities were prepared by cutting each tooth at 7 mm from the apex and preparing hemispherical cavities on both the sides and then re-attaching them. The sample was randomly separated into three groups (n = 12 in each group). In the first group, thermal injection technique (Obtura II) was employed and served as the control group. In the second group, injection of cold free-flow obturation technique with a master cone (GF2-C) was employed, whereas in the third group injection of cold free-flow obturation without a master cone (GF2) was followed. The teeth were re-cut at the same level as before and examined under a stereomicroscope. Subsequently, the captured images were transferred to AutoCAD program to measure the percentage of total filling "TF," gutta-percha "G," sealer "S," and voids "V" out of the total surface of the cross sections. RESULTS: All materials showed high filling properties in terms of "total filling," ranging from 99.17% (for Obtura II) to 99.72% (for GF2-C). Regarding gutta-percha percentages of filling, they ranged from 83.15 to 83.93%, whereas those for the sealer ranged from 5.71 to 15.24%. GuttaFlow2 group with a master cone appeared to give the best results despite the insignificant differences among the three groups. CONCLUSION: The GuttaFlow2 with a master cone technique seemed to be a promising filling material and gave results similar to those observed with Obtura II. It is recommended for use to obturate internal resorption cavities in clinical practice due to its good adaptability to root canal walls, ease of handling, and application. CLINICAL SIGNIFICANCE: Internal resorption defects can be successfully filled with GuttaFlow2 material when supplemented with a master cone, and the results are comparable with those obtained with the Obtura II technique.

Comparison between gutta-percha and resin-coated gutta-percha using different obturation techniques.

BACKGROUND: The aim of this study was to evaluate and compare the obturation quality between canals obturated with gutta-percha/AH Plus sealer (GP group) and resin-coated GP/EndoREZ® sealer (ER group). METHODS: A total sample of 90 mandibular premolar teeth was divided into 2 groups (2 × 45 canals): the GP group and ER group. Each group was further divided into 3 subgroups (n = 15): cold lateral compaction (CLC), warm lateral compaction (WLC) and single cone (SC). The teeth were subsequently embedded in resin and sectioned horizontally at 1, 3, 6 and 9 mm. All sections were then viewed with a stereomicroscope at ×40 magnification. The area occupied by core filling materials was determined using Cell^D software. RESULTS: With CLC, the percentage of core filling materials in the ER group was significantly higher than in the GP group at the 1- and 3-mm levels. Similarly, with WLC, the percentage of core filling material in the ER group was significantly higher than in the GP group at the 1-, 3- and 9-mm levels. With SC, the percentage of core filling materials in the ER group was significantly higher than in the GP group at all levels. CONCLUSIONS: It can be concluded that the resin-coated GP/EndoREZ® sealer is superior to the gutta-percha/AH Plus in the percentage of core filling material.

In vitro antibacterial activity of a silicone-based endodontic sealer and two conventional sealers.

The aim of this study was to evaluate whether the modification in the silver component is capable of providing GuttaFlow 2 with antibacterial activity against Enterococcus faecalis compared with epoxy resin-based (AH Plus) and zinc oxide and eugenol-based (Endofill) sealers. The antibacterial activity was evaluated using a reference strain of E. faecalis (ATCC 29212). Freshly mixed sealers were subjected to the agar diffusion test (ADT), while the direct contact test (DCT) was performed after materials setting. ADT results were obtained through measurements, in millimeters, of the inhibition zones promoted by the materials, using a digital caliper. In DCT, values of CFU/mL promoted by the three sealers were compared in three experimental periods (1 min, 1 h, and 24 h). The data were analyzed using Kruskal-Wallis and Dunn post-hoc tests (p < 0.05). In both ADT and DCT, GuttaFlow 2 presented no effect against E. faecalis, while Endofill and AH Plus showed similar inhibition zones. Endofill was the only material capable of reducing bacterial growth in DCT. In conclusion, modifications in the silver particle of GuttaFlow 2 did not result in a sealer with antibacterial effect against E. faecalis.