RESUMO
In the present study, we developed and evaluated an in situ gelling system based on hexanoyl glycol chitosan (H-GCS) for enhanced ocular bioavailability. An aqueous solution of H-GCS exhibited a typical sol-gel transition at 32⯰C. The formed H-GCS hydrogel was characterized by rheology and scanning electron microscopy (SEM). H-GCS had minimal in vitro cytotoxicity against L-929 and HCEC cells over a concentration range of 0-0.8â¯mg/mL. Additionally, the H-GCS hydrogel exhibited good ocular tolerance and biocompatibility after a single instillation. Moreover, H-GCS hydrogel significantly prolonged the precorneal retention of fluorescein sodium compared with its aqueous solution. An in vivo pharmacokinetic study demonstrated that the levofloxacin-loaded H-GCS hydrogel could provide a significantly higher Cmax and AUC0-12h compared with the levofloxacin aqueous solution, thus increasing ocular bioavailability. Overall, the proposed H-GCS hydrogel acts as an in situ gelling system that might represent a promising vehicle for topical ocular drug delivery.
Assuntos
Quitosana/química , Olho/efeitos dos fármacos , Olho/metabolismo , Hidrogel de Polietilenoglicol-Dimetacrilato/química , Soluções Oftálmicas/química , Soluções Oftálmicas/metabolismo , Animais , Disponibilidade Biológica , Linhagem Celular , Sistemas de Liberação de Medicamentos/métodos , Liberação Controlada de Fármacos/efeitos dos fármacos , Humanos , Hidrogel de Polietilenoglicol-Dimetacrilato/metabolismo , Levofloxacino/química , Levofloxacino/metabolismo , Coelhos , TemperaturaRESUMO
Hydrogels are homogenous materials that are limited in their ability to form oriented multilayered architecture in three-dimensional (3D) tissue constructs. Current techniques have led to advancements in this area. Such techniques often require extra devices and/or involve complex processes that are inaccessible to many laboratories. Here is described a one-step methodology that permits reliable alignment of cells into multiple layers using a self-assembling multidomain peptide (MDP) hydrogels. We characterized the structural features, viability, and molecular properties of dental pulp cells fabricated with MDP and demonstrated that manipulation of the layering of cells in the scaffolds was achieved by decreasing the weight by volume percentage (w/v%) of MDP contained within the scaffold. This approach allows cells to remodel their environment and enhanced various gene expression profiles, such as cell proliferation, angiogenesis, and extracellular matrix (ECM) remodeling-related genes. We further validated our approach for constructing various architectural configurations of tissues by fabricating cells into stratified multilayered and tubular structures. Our methodology provides a simple, rapid way to generate 3D tissue constructs with multilayered architectures. This method shows great potential to mimic in vivo microenvironments for cells and may be of benefit in modeling more complex tissues in the field of regenerative medicine.
Assuntos
Polpa Dentária/fisiologia , Hidrogel de Polietilenoglicol-Dimetacrilato/metabolismo , Peptídeos/metabolismo , Técnicas de Cultura de Tecidos/métodos , Alicerces Teciduais , Animais , Linhagem Celular , CamundongosRESUMO
Envenomings by snakebites constitute a serious and challenging global health issue. The mainstay in the therapy of snakebite envenomings is the parenteral administration of animal-derived antivenoms. Significantly, antivenoms are only partially effective in the control of local tissue damage. A novel approach to mitigate the progression of local tissue damage that could complement the antivenom therapy of envenomings is proposed. We describe an abiotic hydrogel nanoparticle engineered to bind to and modulate the activity of a diverse array of PLA2 and 3FTX isoforms found in Elapidae snake venoms. These two families of protein toxins share features that are associated with their common (membrane) targets, allowing for nanoparticle sequestration by a mechanism that differs from immunological (epitope) selection. The nanoparticles are non-toxic in mice and inhibit dose-dependently the dermonecrotic activity of Naja nigricollis venom.
Assuntos
Venenos Elapídicos/metabolismo , Naja , Nanopartículas/metabolismo , Necrose/prevenção & controle , Dermatopatias/prevenção & controle , Mordeduras de Serpentes/complicações , Toxinas Biológicas/metabolismo , Animais , Modelos Animais de Doenças , Hidrogel de Polietilenoglicol-Dimetacrilato/metabolismo , Camundongos , Ligação ProteicaRESUMO
Amphiphilic urea 1 with a hydrophilic lactose group was prepared as a low-molecular-weight hydrogelator, which formed a transparent supramolecular hydrogel. Enzymatic hydrolysis of the lactose moiety using ß-galactosidase allowed a gel-to-sol phase transition of the supramolecular hydrogel. A ß-galactosidase inhibitor enables us to control the time course of this phase transition.
Assuntos
Hidrogel de Polietilenoglicol-Dimetacrilato/metabolismo , Lactose/análogos & derivados , Lactose/metabolismo , beta-Galactosidase/química , Actinidia/enzimologia , Inibidores Enzimáticos/química , Frutas/enzimologia , Hidrogel de Polietilenoglicol-Dimetacrilato/química , Hidrólise , Lactose/química , Transição de Fase , Compostos de Fenilureia/química , Compostos de Fenilureia/metabolismo , Tiogalactosídeos/química , Temperatura de Transição , beta-Galactosidase/antagonistas & inibidoresRESUMO
Micro- and nanomotors and their use for biomedical applications have recently received increased attention. However, most designs use top-down methods to construct inorganic motors, which are labour-intensive and not suitable for biomedical use. Herein, we report a high-throughput design of an asymmetric hydrogel microparticle with autonomous movement by using a microfluidic chip to generate asymmetric, aqueous, two-phase-separating droplets consisting of poly(ethylene glycol) diacrylate (PEGDA) and dextran, with the biocatalyst placed in the PEGDA phase. The motor is propelled by enzyme-mediated decomposition of fuel. The speed of the motors is influenced by the roughness of the PEGDA surface after diffusion of dextran and was tuned by using higher molecular weight dextran. This roughness allows for easier pinning of oxygen bubbles and thus higher speeds of the motors. Pinning of bubbles occurs repeatedly at the same location, thereby resulting in constant circular or linear motion.
Assuntos
Materiais Biocompatíveis/síntese química , Dextranos/metabolismo , Ensaios de Triagem em Larga Escala , Hidrogel de Polietilenoglicol-Dimetacrilato/metabolismo , Técnicas Analíticas Microfluídicas , Polietilenoglicóis/metabolismo , Biocatálise , Materiais Biocompatíveis/química , Dextranos/química , Hidrogel de Polietilenoglicol-Dimetacrilato/química , Microscopia de Fluorescência , Tamanho da Partícula , Polietilenoglicóis/química , Propriedades de SuperfícieRESUMO
Interactions between tumor cells and fibroblasts play a pivotal role in cancer development and progression. Indeed, the paracrine communication between these two cell types is known to have physiological effects that alter carcinogenic and metastatic potential. An often overlooked player in these interactions is the involvement of the extracellular matrix (ECM). The network of ECM proteins secreted from fibroblasts is reportedly altered with cancer initiation and progression, and in several cases has been associated with patient outcome. The androgen receptor (AR) is one such example and has been shown to be a dynamic and inducible regulator of ECM production. Contemporary assessment of dynamic multicellular interactions leading to cancer initiation and progression necessitates 3D in vitro modeling to better mimic the in vivo environment. In the current chapter, we describe some simple approaches to generate 3D models of fibroblast-produced ECM, how hormone manipulation of fibroblasts can lead to production of different ECMs, and how these ECM models can be used to test processes implicated in cancer progression and metastasis.
Assuntos
Neoplasias da Próstata/patologia , Células Estromais/patologia , Fibroblastos Associados a Câncer/metabolismo , Fibroblastos Associados a Câncer/patologia , Adesão Celular , Linhagem Celular Tumoral , Matriz Extracelular/metabolismo , Fibroblastos/metabolismo , Humanos , Hidrogel de Polietilenoglicol-Dimetacrilato/metabolismo , Masculino , Neoplasias da Próstata/metabolismo , Proteômica/métodos , Reprodutibilidade dos Testes , Esferoides Celulares , Células Estromais/metabolismo , Células Tumorais CultivadasRESUMO
The interaction between bacteria and graphene-family materials like pristine graphene, graphene oxide (GO) and reduced graphene oxide (rGO) is such an elusive issue that its implication in environmental biotechnology is unclear. Herein, two kinds of self-assembled bio-rGO-hydrogels (BGHs) were prepared by cultivating specific Shewanella sp. strains with GO solution for the first time. The microscopic examination by SEM, TEM and CLSM indicated a porous 3D structure of BGHs, in which live bacteria firmly anchored and extracellular polymeric substances (EPS) abundantly distributed. Spectra of XRD, FTIR, XPS and Raman further proved that GO was reduced to rGO by bacteria along with the gelation process, which suggests a potential green technique to produce graphene. Based on the characterization results, four mechanisms for the BGH formation were proposed, i.e., stacking, bridging, rolling and cross-linking of rGO sheets, through the synergistic effect of activities and EPS from special bacteria. More importantly, the BGHs obtained in this study were found able to achieve unique cleanup performance that the counterpart free bacteria could not fulfill, as exemplified in Congo red decolorization and Cr(VI) bioreduction. These findings therefore enlighten a prospective application of graphene materials for the biological treatment of wastewaters in the future.
Assuntos
Bactérias/metabolismo , Biodegradação Ambiental , Grafite/metabolismo , Hidrogel de Polietilenoglicol-Dimetacrilato , Purificação da Água/métodos , Bactérias/efeitos dos fármacos , Grafite/química , Hidrogel de Polietilenoglicol-Dimetacrilato/química , Hidrogel de Polietilenoglicol-Dimetacrilato/metabolismo , Hidrogel de Polietilenoglicol-Dimetacrilato/farmacologia , Águas Residuárias/microbiologiaRESUMO
BACKGROUND: Carcinoma associated fibroblasts (CAFs or myofibroblasts) are activated fibroblasts which participate in breast tumor growth, angiogenesis, invasion, metastasis and therapy resistance. As such, recent efforts have been directed toward understanding the factors responsible for activation of the phenotype. In this study, we have investigated how changes in the mechanical stiffness of a 3D hydrogel alter the behavior and myofibroblast-like properties of human mammary fibroblasts (HMFs). RESULTS: Here, we utilized microbial transglutaminase (mTG) to mechanically tune the stiffness of gelatin hydrogels and used rheology to show that increasing concentrations mTG resulted in hydrogels with greater elastic moduli (G'). Upon encapsulation of HMFs in 200 (compliant), 300 (moderate) and 1100 Pa (stiff) mTG hydrogels, it was found that the HMFs remained viable and proliferated over the 7 day culture period. Specifically, rates of proliferation were greatest for HMFs in moderate hydrogels. Regarding morphology, HMFs in compliant and moderate hydrogels exhibited a spindle-like morphology while HMFs in stiff hydrogels exhibited a rounded morphology with several large cellular protrusions. Quantification of cell morphology revealed that HMFs cultured in all mTG hydrogels overall assumed a more elongated phenotype over time in culture; however, few significant differences in morphology were observed between HMFs in each of the hydrogel conditions. To determine whether matrix stiffness upregulated expression of ECM and myofibroblast markers, western blot was performed on HMFs in compliant, moderate and stiff hydrogels. It was found that ECM and myofibroblast proteins varied in expression during both the culture period and according to matrix stiffness with no clear correlation between matrix stiffness and a myofibroblast phenotype. Finally, TGF-ß levels were quantified in the conditioned media from HMFs in compliant, moderate and stiff hydrogels. TGF-ß was significantly greater for HMFs encapsulated in stiff hydrogels. CONCLUSIONS: Overall, these results show that while HMFs are viable and proliferate in mTG hydrogels, increasing matrix stiffness of mTG gelatin hydrogels doesn't support a robust myofibroblast phenotype from HMFs. These results have important implications for further understanding how modulating 3D matrix stiffness affects fibroblast morphology and activation into a myofibroblast phenotype.
Assuntos
Técnicas de Cultura de Células/métodos , Matriz Extracelular/metabolismo , Fibroblastos/citologia , Hidrogel de Polietilenoglicol-Dimetacrilato/metabolismo , Transglutaminases/metabolismo , Diferenciação Celular/efeitos dos fármacos , Proliferação de Células/efeitos dos fármacos , Sobrevivência Celular/efeitos dos fármacos , Células Cultivadas , Meios de Cultivo Condicionados/química , Fibroblastos/efeitos dos fármacos , Fibroblastos/fisiologia , Regulação da Expressão Gênica/efeitos dos fármacos , Humanos , Hidrogel de Polietilenoglicol-Dimetacrilato/química , Hidrogel de Polietilenoglicol-Dimetacrilato/farmacologia , Miofibroblastos/citologia , Miofibroblastos/fisiologia , Fenótipo , Proteínas/genética , Fator de Crescimento Transformador beta/genética , Fator de Crescimento Transformador beta/metabolismo , Transglutaminases/químicaRESUMO
Amyloid based hydrogels can mimic the extracellular matrix and serve as matrices for tissue engineering both in vitro and in vivo. A pH responsive self-assembled amyloid hydrogel system is used to encapsulate various growth factors for driving stem cell differentiation toward neuronal lineage. Diffusion studies with fluorescence recovery after photobleaching and bulk release with the model protein fluorescein isothiocyanate-bovine serum albumin show that encapsulated protein molecules can be released in a sustained fashion from the hydrogel over a considerable period of time (30 d). Moreover, by modulating the porosity of the hydrogel by the simple addition of salt, the encapsulated protein molecules can be retained for a longer period of time within the hydrogel. Mesenchymal stem cells, when cultured in 3D amyloid hydrogels with growth factors fibroblast growth factor 8 and sonic hedgehog, show more neuron specific differentiation as compared to hydrogel alone. This higher differentiation potential of growth factor encapsulated amyloid hydrogels can be due to concomitant exposure of cells to biomechanical as well as biochemical cues during the course of differentiation. The present study suggests that amyloid based hydrogel can be exploited for controlled growth factor delivery as well as directed stem cell differentiation to neuron.
Assuntos
Amiloide/metabolismo , Diferenciação Celular/fisiologia , Hidrogel de Polietilenoglicol-Dimetacrilato/metabolismo , Peptídeos e Proteínas de Sinalização Intercelular/metabolismo , Células Cultivadas , Matriz Extracelular/metabolismo , Fluorescência , Humanos , Células-Tronco Mesenquimais/metabolismo , Células-Tronco Mesenquimais/fisiologia , Engenharia Tecidual/métodosRESUMO
This is the first report on the development of a covalently bone morphogenetic protein-2 (BMP2)-immobilized hydrogel that is suitable for osteogenic differentiation of human periodontal ligament stem cells (hPLSCs). O-propargyl-tyrosine (OpgY) was site-specifically incorporated into BMP2 to prepare BMP2-OpgY with an alkyne group. The engineered BMP2-OpgY exhibited osteogenic characteristics after in vitro osteogenic differentiation of hPLSCs, indicating the osteogenic ability of BMP2-OpgY. A methoxy polyethylene glycol-(polycaprolactone-(N3)) block copolymer (MC-N3) was prepared as an injectable in situ-forming hydrogel. BMP2 covalently immobilized on an MC hydrogel (MC-BMP2) was prepared quantitatively by a simple biorthogonal reaction between alkyne groups on BMP2-OpgY and azide groups on MC-N3 via a Cu(I)-catalyzed click reaction. The hPLSCs-loaded MC-BMP2 formed a hydrogel almost immediately upon injection into animals. In vivo osteogenic differentiation of hPLSCs in the MC-BMP2 formulation was confirmed by histological staining and gene expression analyses. Histological staining of hPLSC-loaded MC-BMP2 implants showed evidence of mineralized calcium deposits, whereas hPLSC-loaded MC-Cl or BMP2-OpgY mixed with MC-Cl, implants showed no mineral deposits. Additionally, MC-BMP2 induced higher levels of osteogenic gene expression in hPLSCs than in other groups. In conclusion, BMP2-OpgY covalently immobilized on MC-BMP2 induced osteogenic differentiation of hPLSCs as a noninvasive method for bone tissue engineering.
Assuntos
Proteína Morfogenética Óssea 2/metabolismo , Diferenciação Celular/efeitos dos fármacos , Hidrogel de Polietilenoglicol-Dimetacrilato/metabolismo , Osteogênese/efeitos dos fármacos , Ligamento Periodontal/citologia , Células-Tronco/efeitos dos fármacos , Adulto , Proteína Morfogenética Óssea 2/administração & dosagem , Feminino , Humanos , Hidrogel de Polietilenoglicol-Dimetacrilato/administração & dosagem , Injeções , Adulto JovemRESUMO
In the nacre or aragonitic layer of an oyster pearl, there exists a 12-member proteome that regulates both the early stages of nucleation and nanoscale-to-mesoscale assembly of nacre tablets and calcitic crystals from mineral nanoparticle precursors. Several approaches to understanding protein-associated mechanisms of pearl nacre formation have been developed, yet we still lack insight into how protein ensembles or proteomes manage nucleation and crystal growth. To provide additional insights, we have created a proportionally defined combinatorial model consisting of two pearl nacre-associated proteins, PFMG1 and PFMG2 (shell oyster pearl nacre, Pinctada fucata) whose individual in vitro mineralization functionalities are distinct from one another. Using scanning electron microscopy, atomic force microscopy, Ca(II) potentiometric titrations, and quartz crystal microbalance with dissipation monitoring quantitative analyses, we find that at 1:1 molar ratios, rPFMG2 and rPFMG1 co-aggregate in specific molecular ratios to form hybrid hydrogels that affect both the early and later stages of in vitro calcium carbonate nucleation. Within these hybrid hydrogels, rPFMG2 plays a role in defining protein co-aggregation and hydrogel dimension, whereas rPFMG1 defines participation in nonclassical nucleation processes; both proteins exhibit synergy with regard to surface and subsurface modifications to existing crystals. The interactions between both proteins are enhanced by Ca(II) ions and may involve Ca(II)-induced conformational events within the EF-hand rPFMG1 protein, as well as putative interactions between the EF-hand domain of rPFMG1 and the calponin-like domain of rPFMG2. Thus, the pearl-associated PFMG1 and PFMG2 proteins interact and exhibit mineralization functionalities in specific ways, which may be relevant for pearl formation.
Assuntos
Hidrogel de Polietilenoglicol-Dimetacrilato/metabolismo , Nácar/metabolismo , Pinctada/metabolismo , Proteínas/metabolismo , Animais , Proteínas de Ligação ao Cálcio/química , Cristalização , Motivos EF Hand , Proteínas dos Microfilamentos/química , Microscopia de Força Atômica , Microscopia Eletrônica de Varredura , Modelos Moleculares , Pinctada/ultraestrutura , Agregados Proteicos , Domínios Proteicos , Proteínas/química , CalponinasRESUMO
Transdermal protein delivery is a useful and attractive method for protein therapy and dermal vaccination. However, this delivery method is restricted by the low permeability of the stratum corneum. The purpose of this study was to develop a transdermal delivery system for enhancement of protein permeability into the skin. First, we prepared a transparent gel patch made of polysaccharides with gold nanorods on the gel surface and fluorescein isothiocyanate-modified ovalbumin (FITC-OVA) inside. Next, the gel patch was placed on mouse skin to allow contact with the coated gold nanorods, and irradiated by a continuous-wave laser. The laser irradiation heated the gold nanorods and the skin temperature increased to 43°C, resulting in enhanced translocation of FITC-OVA into the skin. These results confirmed the capability of the transdermal protein delivery system to perforate the stratum corneum and thus facilitate the passage of proteins across the skin.
Assuntos
Ouro/metabolismo , Temperatura Alta , Hidrogel de Polietilenoglicol-Dimetacrilato/metabolismo , Nanotubos , Ovalbumina/metabolismo , Polissacarídeos/metabolismo , Administração Cutânea , Animais , Sistemas de Liberação de Medicamentos/métodos , Ouro/administração & dosagem , Hidrogel de Polietilenoglicol-Dimetacrilato/administração & dosagem , Masculino , Camundongos , Ovalbumina/administração & dosagem , Polissacarídeos/administração & dosagem , Pele/efeitos dos fármacos , Pele/metabolismoRESUMO
Hydrogel fibers with biodegradable and biocompatible features are useful for the fabrication of filament-like tissues. We developed cell-laden hyaluronic acid (HA)-based hollow hydrogel fibers to create single and bundled filament-like tissues. The cell-laden fibers were fabricated by crosslinking phenolic-substituted hyaluronic acid (HA-Ph) in an aqueous solution containing cells through a horseradish peroxidase (HRP)-catalyzed reaction in the presence of catalase by extruding the solution in ambient flow of an aqueous solution containing H2O2. The encapsulated cells proliferated and grew within the hollow core, and the cells formed filament-like constructs in both single and bundled fibers, which were obtained by collection on a rotating cylindrical tube. Single and bundled filament-like tissues covered with an additional heterogeneous cell layer were obtained by degrading the fiber membrane using hyaluronidase after covering the fiber surface with heterogeneous cells. Cellular viability was preserved during HA-Ph hydrogel fiber fabrication and filament-like tissue formation. These results demonstrate the feasibility of HA-based hollow hydrogel fibers obtained through HRP- and catalase-mediated reactions to engineer filament-like tissues.
Assuntos
Materiais Biocompatíveis/química , Ácido Hialurônico/química , Hidrogel de Polietilenoglicol-Dimetacrilato/química , Alicerces Teciduais/química , Materiais Biocompatíveis/metabolismo , Materiais Biocompatíveis/farmacologia , Sobrevivência Celular/efeitos dos fármacos , Células HeLa , Humanos , Hidrogel de Polietilenoglicol-Dimetacrilato/metabolismo , Hidrogel de Polietilenoglicol-Dimetacrilato/farmacologia , Água/químicaRESUMO
The osteochondral interface functions as a structural barrier between cartilage and bone, maintaining tissue integrity postinjury and during homeostasis. Regeneration of this calcified cartilage region is thus essential for integrative cartilage healing, and hydrogel-ceramic composite scaffolds have been explored for calcified cartilage formation. The objective of this study is to test the hypothesis that Ca/P ratio of the ceramic phase of the composite scaffold regulates chondrocyte biosynthesis and mineralization potential. Specifically, the response of deep zone chondrocytes to two bioactive ceramics with different calcium-phosphorus ratios (1.35 ± 0.01 and 1.41 ± 0.02) was evaluated in agarose hydrogel scaffolds over two weeks in vitro. It was observed that the ceramic with higher calcium-phosphorus ratio enhanced chondrocyte proliferation, glycosaminoglycan production, and induced an early onset of alkaline phosphorus activity, while the ceramic with lower calcium-phosphorus ratio performed similarly to the ceramic-free control. These results underscore the importance of ceramic bioactivity in directing chondrocyte response, and demonstrate that Ca/P ratio is a key parameter to be considered in osteochondral scaffold design. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 2694-2702, 2017.
Assuntos
Materiais Biocompatíveis/metabolismo , Calcificação Fisiológica , Cálcio/metabolismo , Cerâmica/metabolismo , Condrócitos/metabolismo , Fósforo/metabolismo , Animais , Apatitas/metabolismo , Materiais Biocompatíveis/química , Cálcio/química , Bovinos , Proliferação de Células , Sobrevivência Celular , Células Cultivadas , Cerâmica/química , Condrócitos/citologia , Condrogênese , Hidrogel de Polietilenoglicol-Dimetacrilato/química , Hidrogel de Polietilenoglicol-Dimetacrilato/metabolismo , Fósforo/química , Alicerces Teciduais/químicaRESUMO
The purpose of the present study was to develop and optimize sertaconazole microemulsion-loaded hydrogel (STZ ME G) to enhance the dermal delivery and skin retention of the drug. Following screening of various oils for maximum drug solubility, 12 pseudoternary phase diagrams were constructed using oils (Peceol®, Capryol® 90), surfactants (Tween® 80, Cremophor® EL), a cosurfactant (Transcutol® P) and water. A 21 × 31 × 21 × 31 full factorial design was employed to optimize a ME of desirable characteristics. The MEs were formulated by varying the oil type, oil concentration, surfactant type and surfactant: cosurfactant ratio. Optimized ME formulae F22 [5% Peceol®, 55% Tween® 80: Transcutol® (1:2), 40% water] and F31 [5% Peceol®, 55% Cremophor® EL: Transcutol® (1:2), 40% water] acquired mean droplet size of 75.21 and 8.68 nm, and zeta potential of 34.65 and 24.05 mV, respectively. Since F22 showed higher STZ skin retention during ex vivo studies (686.47 µg/cm2) than F31 (338.11 µg/cm2); hence it was incorporated in 0.5% Carbopol 934 gel to augment STZ skin retention capability. STZ ME G exhibited higher STZ skin retention (1086.1 µg/cm2) than the marketed product "Dermofix® cream" (270.3 µg/cm2). The antimycotic activity against C.albicans revealed increased zones of inhibition for F22 and STZ ME G (35.75 and 30.5 mm, respectively) compared to Dermofix® cream (26 mm). No histopathological changes were observed following topical application of STZ ME G on rats' skin (n = 9). Overall, the obtained results confirmed that the fabricated formulation could be a promising vehicle for the dermal delivery of STZ.
Assuntos
Antifúngicos/farmacologia , Candida albicans/efeitos dos fármacos , Hidrogel de Polietilenoglicol-Dimetacrilato/metabolismo , Imidazóis/administração & dosagem , Imidazóis/farmacologia , Polietilenoglicóis/metabolismo , Polissorbatos/metabolismo , Tiofenos/administração & dosagem , Tiofenos/farmacologia , Administração Cutânea , Animais , Antifúngicos/administração & dosagem , Antifúngicos/química , Candida albicans/química , Química Farmacêutica , Hidrogel de Polietilenoglicol-Dimetacrilato/química , Imidazóis/química , Polietilenoglicóis/química , Polissorbatos/química , Ratos , Solubilidade , Tensoativos/metabolismo , Tiofenos/químicaRESUMO
With a significant portion of the world suffering from chronic pain, the management and treatment of this condition still requires extensive research to successfully mobilize and functionalize its sufferers. This article details the in vitro and in vivo evaluation of a transdermal electro-modulated hydrogel-microneedle array (EMHM) device for the treatment of chronic pain. In vitro characterization of the electro-modulated hydrogel was undertaken before the determination of the in vivo release, histopathologic and pharmacokinetic profiles of the EMHM in a Sprague Dawley rat model. Pharmacokinetic modeling was conducted to establish a level A in vitro-in vivo correlation. Data analysis was carried out by segmenting the combined in vivo release profile into individualistic profiles before analysis.
Assuntos
Analgesia/métodos , Sistemas de Liberação de Medicamentos/métodos , Hidrogel de Polietilenoglicol-Dimetacrilato/administração & dosagem , Hidrogel de Polietilenoglicol-Dimetacrilato/metabolismo , Microinjeções/métodos , Absorção Cutânea/fisiologia , Administração Cutânea , Animais , Estimulação Elétrica/métodos , Ratos , Ratos Sprague-Dawley , Absorção Cutânea/efeitos dos fármacosRESUMO
OBJECTIVES: To test whether or not chemical and/or physical modifications of polyethylene glycol (PEG) hydrogels influence degradation time, matrix/membrane stability, and integration into surrounding hard and soft tissues. MATERIAL AND METHODS: In 28 rabbits, six treatment modalities were randomly applied to six sites on the rabbit skull: a dense network PEG hydrogel (PEG HD), a medium-dense network PEG hydrogel (PEG MD), a medium-dense network PEG hydrogel modified with an RGD sequence (PEG MD/RGD), a medium-dense network PEG hydrogel modified with RGD with reduced carboxymethyl cellulose (PEG MD/RGD_LV), a loose network PEG hydrogel modified with RGD (PEG LD/RGD), and a collagen membrane (BG). Descriptive histology and histomorphometry were performed at 1, 2, 4, and 6 weeks. RESULTS: PEG HD revealed the highest percentage of residual matrix at all time points starting with 47.2% (95% CI: 32.8-63.8%) at 1 week and ending with 23.4% (95% CI: 10.3-49.8%) at 6 weeks. The hydrogel with the loosest network (PEG LD/RGD) was stable the first 2 weeks and then degraded continuously with a final area of 8.3% (95% CI: 3.2-21.2%). PEG HD was the most stable and densely stained membrane, whereas PEG MD and PEG LD matrices integrated faster, but started to degrade to a higher degree between 2 and 4 weeks. PEG MD degradation was dependent on the addition of RGD and the amount of CMC. CONCLUSIONS: Chemical and/or physical modifications of PEG hydrogels influenced matrix stability. PEG MD/RGD demonstrated an optimal balance between degradation time and integration into the surrounding soft and hard tissues.
Assuntos
Implantes Absorvíveis , Materiais Biocompatíveis/metabolismo , Polietilenoglicóis/metabolismo , Animais , Regeneração Óssea , Hidrogel de Polietilenoglicol-Dimetacrilato/metabolismo , Coelhos , Crânio/patologia , Crânio/cirurgiaRESUMO
The purpose of this study was to explore the use of molecular bio-imaging systems and biomechanical dynamics to elucidate the fate of a nanocomposite hydrogel system prepared by merging FITC-labeled nanolipobubbles within a cross-linked hydrogel network. The nanocomposite hydrogel system was characterized by size distribution analysis and zeta potential as well as shears thinning behavior, elastic modulus (G'), viscous loss moduli (G"), TEM, and FTIR. In addition, molecular bio-imaging via Vevo ultrasound and Cell-viZio techniques evaluated the stability and distribution of the nanolipobubbles within the cross-linked hydrogel. FITC-labeled and functionalized nanolipobubbles had particle sizes between 135 and 158 nm (PdI = 0.129 and 0.190) and a zeta potential of -34 mV. TEM and ultrasound imaging revealed the uniformity and dimensional stability of the functionalized nanolipobubbles pre- and post-embedment into the cross-linked hydrogel. Biomechanical characterization of the hydrogel by shear thinning behavior was governed by the polymer concentration and the cross-linker, glutaraldehyde. Ultrasound analysis and Cell-viZio bio-imaging were highly suitable to visualize the fluorescent image-guided nanolipobubbles and their morphology post-embedment into the hydrogel to form the NanoComposite system. Since the nanocomposite is intended for targeted treatment of neurodegenerative disorders, the distribution of the functionalized nanolipobubbles into PC12 neuronal cells was also ascertained via confocal microscopy. Results demonstrated effective release and localization of the nanolipobubbles within PC12 neuronal cells. The molecular structure of the synthetic surface peptide remained intact for an extended period to ensure potency for targeted delivery from the hydrogel ex vivo. These findings provide further insight into the properties of nanocomposite hydrogels for specialized drug delivery.
Assuntos
Hidrogel de Polietilenoglicol-Dimetacrilato/química , Nanocompostos/química , Animais , Linhagem Celular Tumoral , Sistemas de Liberação de Medicamentos/métodos , Fluoresceína-5-Isotiocianato/química , Hidrogel de Polietilenoglicol-Dimetacrilato/metabolismo , Células PC12 , Tamanho da Partícula , Ratos , Distribuição Tecidual/efeitos dos fármacosRESUMO
OBJECTIVE: This work aimed to develop an alternative sustained-release thermosensitive praziquantel-loaded nanoemulsion (PZQ-NE) hydrogel for better schistosomiasis treatment. SIGNIFICANCE: PZQ-NE-dispersed chitosan/glycerol 2-phosphate disodium/HPMC (NE/CS/ß-GP/HMPC) hydrogel was successfully prepared to improve bioavailability of PZQ. METHODS: Solubility tests and pseudo-ternary phase diagrams were applied to screen optimal oils, surfactants and co-surfactants of NE. The hydrogels were characterized for gelling time, surface exudates, rheological properties and in vitro drug release. Formulation optimization of NE/CS/ß-GP/HMPC hydrogel was conducted by Box-Behnken experimental design combined with response surface methodology. In vitro cytotoxicity of hydrogel was studied by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide method. The sustained-release property of PZQ in NE and optimized hydrogel was evaluated by pharmacokinetic study in rabbits. RESULTS: The formulation of PZQ-NE consisted of mass ratio of 12.5% capryol 90 containing PZQ (160 mg/g), 40% cremophor RH 40/tween 20 and transcutol HP (S/CoS = 2:1), 47.5% deionized water. PZQ releasing from NE/CS/ß-GP/HMPC hydrogels was best fitted to Higuchi model and governed by diffusion. Rheological investigation evidenced the themosensitive gelation of different hydrogel systems and their gel-like character at 37 °C. The optimized hydrogel formulation consisted of HPMC solution (103.69 mg/g), 3.03% (w/v) chitosan and 14.1% (w/v) ß-GP showed no cytotoxicity when the addition of NE was no more than 100 mg/g. Pharmacokinetic parameters indicated that NE/CS/ß-GP/HMPC hydrogel can significantly slow down drug elimination, prolong mean residence time and improve bioavailability of PZQ. CONCLUSIONS: NE/CS/ß-GP/HMPC hydrogel possessed sustained-release property and could be an alternative antischistosomal drug delivery system with improved therapeutic effect.
Assuntos
Preparações de Ação Retardada/química , Emulsões/química , Hidrogel de Polietilenoglicol-Dimetacrilato/química , Nanopartículas/química , Praziquantel/química , Animais , Disponibilidade Biológica , Química Farmacêutica/métodos , Quitosana/química , Preparações de Ação Retardada/metabolismo , Feminino , Glicerofosfatos/química , Hidrogel de Polietilenoglicol-Dimetacrilato/metabolismo , Masculino , Praziquantel/metabolismo , Coelhos , Reologia , Solubilidade , Soluções/química , Tensoativos/química , TemperaturaRESUMO
There is an increasing interest in the nanostructured polysaccharide-iron hydrogel produced by Klebsiella oxytoca. Critical physicochemical and biological characteristics of these nanostructures should be revealed for biomedical applications. Accordingly, an iron reducing strain K. oxytoca, which synthesizes biogenic polysaccharide-iron hydrogel nanoparticles, known as Fe (III)-exopolysaccharide (Fe-EPS) was isolated from a mineral spring. For microbiological identification purpose 16S rRNA sequence analysis and different morphological, physiological, and biochemical characteristics of the isolate were studied. Critical physicochemical and biological characteristics of the produced Fe-EPS were evaluated using transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, X-ray crystallography (XRD), vibrating sample magnetometer (VSM). In addition, for the first time, Fe-EPS which synthesized by K. oxytoca was evaluated by dynamic light scattering (DLS), thermo gravimetric analysis (TGA), and cytotoxicity assay. TEM micrographs showed that the biogenic Fe-EPS is composed of ultra-small (about 1.8 nm) iron oxide nanoparticles (IONs) which are trapped in a polysaccharide matrix. The matrix was about 17% (w/w) of Fe-EPS total weight and provided a large negative charge of -71 mV. Interestingly, Fe-EPS showed a growth promotion effect on hepatocarcinoma cell line (Hep-G2) and 36% increase in the percentage of viability was observed by 24 h exposure to 500 µg ml-1 Fe-EPS.