Reverse Thiol Trapping Approach to Assess the Thiol Status of Metal-Binding Mitochondrial Proteins.

Thiol-disulfide interconversions are pivotal in the intricate chemistry of biological systems. They play a vital role in governing cellular redox potential and shielding against oxidative harm. These interconversions can also act as molecular switches within an expanding array of redox-regulated proteins, facilitating dynamic and responsive processes. Furthermore, metal-binding proteins often use thiols for coordination. Reverse thiol trapping is a valuable analytical tool to study the redox state of cysteines in biological systems. By selectively capturing and stabilizing free thiol species with an alkylating agent, reverse thiol trapping allows for their subsequent identification and quantification. Various methods can be employed to analyze the trapped thiol adducts, including electrophoresis-based methods, mass spectrometry, nuclear magnetic resonance spectroscopy, and chromatographic techniques. In this chapter, we will focus on describing a simple and sensitive method to sequentially block thiols in their cellular state with a cell-permeant agent (iodoacetamide), and following reduction and denaturation of the samples, trap the native disulfides with a second blocker that shifts the apparent molecular weight of the protein. The oxidation status of proteins for which suitable antibodies are available can then be analyzed by immunoblotting. We present examples of mitochondrial proteins that use cysteine thiols to coordinate metal factors such as iron-sulfur clusters, zinc, and copper.

A Mass Spectrometry Strategy for Protein Quantification Based on the Differential Alkylation of Cysteines Using Iodoacetamide and Acrylamide.

Mass spectrometry has become the most prominent yet evolving technology in quantitative proteomics. Today, a number of label-free and label-based approaches are available for the relative and absolute quantification of proteins and peptides. However, the label-based methods rely solely on the employment of stable isotopes, which are expensive and often limited in availability. Here we propose a label-based quantification strategy, where the mass difference is identified by the differential alkylation of cysteines using iodoacetamide and acrylamide. The alkylation reactions were performed under identical experimental conditions; therefore, the method can be easily integrated into standard proteomic workflows. Using high-resolution mass spectrometry, the feasibility of this approach was assessed with a set of tryptic peptides of human serum albumin. Several critical questions, such as the efficiency of labeling and the effect of the differential alkylation on the peptide retention and fragmentation, were addressed. The concentration of the quality control samples calculated against the calibration curves were within the ±20% acceptance range. It was also demonstrated that heavy labeled peptides exhibit a similar extraction recovery and matrix effect to light ones. Consequently, the approach presented here may be a viable and cost-effective alternative of stable isotope labeling strategies for the quantification of cysteine-containing proteins.

A detailed mapping of the readily accessible disulphide bonds in the cortex of wool fibres.

Trichocyte keratin intermediate filament proteins (keratins) and keratin associated proteins (KAPs) differ from their epithelial equivalents by having significantly more cysteine residues. Interactions between these cysteine residues within a mammalian fiber, and the putative regular organization of interactions are likely important for defining fiber mechanical properties, and thus biological functionality of hairs. Here we extend a previous study of cysteine accessibility under different levels of exposure to reducing compounds to detect a greater resolution of statistically non-random interactions between individual residues from keratins and KAPs. We found that most of the cysteines with this non-random accessibility in the KAPs were close to either the N- or C- terminal domains of these proteins. The most accessible non-random cysteines in keratins were present in the head or tail domains, indicating the likely function of cysteine residues in these regions is in readily forming intermolecular bonds with KAPs. Some of the less accessible non-random cysteines in keratins were discovered either close to or within the rod region in positions previously identified in human epithelial keratins as involved in crosslinking between the heterodimers of the tetramer. Our present study therefore provides a deeper understanding of the accessibility of disulfides in both keratins and KAPs and thus proves that there is some specificity to the disulfide bond interactions leading to these inter- and intra-molecular bonds stabilizing the fiber structure. Furthermore, these suggest potential sites of interaction between keratins and KAPs as well as keratin-keratin interactions in the trichocyte intermediate filament.

Optimization of cysteine residue alkylation using an on-line LC-MS strategy: Benefits of using a cocktail of haloacetamide reagents.

Several common reagents for the alkylation of cysteine residues of model intact proteins were evaluated for reaction speed, yield of alkylated product and degree of over-alkylation using an online LC-MS platform. The efficiency of the alkylation reaction is found to be dependent on the (1) reagent, (2) peptide/protein, (3) reagent concentration and (4) reaction time. At high reagent concentrations, iodoacetic acid was found to produce significant levels of over-alkylation products wherein methionine residues become modified. For optimal performance of the alkylation reaction, we found the use of a cocktail of chloroacetamide, bromoacetamide and iodoacetamide worked best. The alkylating efficiency of each haloacetamide is a balance between the characteristics of the halogen leaving group and the steric hindrance of the alkylation site on the peptide or protein. A key aspect of using a cocktail of haloacetamides is that they all produce the same modification (+57.0209 Da) to the cysteine residues of the protein while the alkylation efficiency of each site may differ for each of the three reagents. Over-alkylation effects appear to be lower with the cocktail due to a lower concentration of each reagent. The haloacetamide cocktail could be useful when considering complex mixtures of proteins.

SP3-FAIMS Chemoproteomics for High-Coverage Profiling of the Human Cysteinome*.

Chemoproteomics has enabled the rapid and proteome-wide discovery of functional, redox-sensitive, and ligandable cysteine residues. Despite widespread adoption and considerable advances in both sample-preparation workflows and MS instrumentation, chemoproteomics experiments still typically only identify a small fraction of all cysteines encoded by the human genome. Here, we develop an optimized sample-preparation workflow that combines enhanced peptide labeling with single-pot, solid-phase-enhanced sample-preparation (SP3) to improve the recovery of biotinylated peptides, even from small sample sizes. By combining this improved workflow with on-line high-field asymmetric waveform ion mobility spectrometry (FAIMS) separation of labeled peptides, we achieve unprecedented coverage of >14000 unique cysteines in a single-shot 70 min experiment. Showcasing the wide utility of the SP3-FAIMS chemoproteomic method, we find that it is also compatible with competitive small-molecule screening by isotopic tandem orthogonal proteolysis-activity-based protein profiling (isoTOP-ABPP). In aggregate, our analysis of 18 samples from seven cell lines identified 34225 unique cysteines using only ∼28 h of instrument time. The comprehensive spectral library and improved coverage provided by the SP3-FAIMS chemoproteomics method will provide the technical foundation for future studies aimed at deciphering the functions and druggability of the human cysteineome.

Simple and sensitive quantification of glutathione hydropersulfide alkylated using iodoacetamide by high-performance liquid chromatography with post-column derivatization.

A novel analytical method was developed for the quantification of glutathione hydropersulfide (G-SSH) in biological samples by high-performance liquid chromatography (HPLC) with post-column derivatization. G-SSH was treated with iodoacetamide as an alkylating agent for 5 min at 37 °C, and the resultant acetamide-labeled G-SSH (G-SS-acetamide) was subjected to HPLC. After separation on a reversed-phase column, G-SS-acetamide was quantified by detection using a post-column reaction with orthophthalaldehyde under alkaline conditions. The standard G-SS-acetamide was synthesized through the S-S exchange reaction between oxidized glutathione and 2-mercaptoacetamide. It should be noted that some types of alkylating agents, including N-ethylmaleimide and monobromobimane, cleave the polysulfide chains of polysulfides that consist of glutathione, resulting in the production of alkylated G-SSHs. We confirmed that iodoacetamide did not enhance the cleavage of acetamide-labeled glutathione trihydropersulfide (G-SSS-acetamide). The lowest quantification limit was estimated to be 25 nM for G-SS-acetamide. This method can be useful for studying the dynamics of sulfane sulfur in glutathione-containing matrices.

High-Precision Sulfur Metabolomics Innovated by a New Specific Probe for Trapping Reactive Sulfur Species.

Aims: Persulfides and other reactive sulfur species are endogenously produced in large amounts in vivo and participate in multiple cellular functions underlying physiological and pathological conditions. In the current study, we aimed to develop an ideal alkylating agent for use in sulfur metabolomics, particularly targeting persulfides and other reactive sulfur species, with minimal artifactual decomposition. Results: We synthesized a tyrosine-based iodoacetamide derivative, N-iodoacetyl l-tyrosine methyl ester (TME-IAM), which reacts with the thiol residue of cysteine identically to that of ß-(4-hydroxyphenyl)ethyl iodoacetamide (HPE-IAM), a commercially available reagent. Our previous study revealed that although various electrophilic alkylating agents readily decomposed polysulfides, HPE-IAM exceptionally stabilized the polysulfides by inhibiting their alkaline hydrolysis. The newly synthesized TME-IAM stabilizes oxidized glutathione tetrasulfide more efficiently than other alkylating agents, including HPE-IAM, iodoacetamide, and monobromobimane. In fact, our quantitative sulfur-related metabolome analysis showed that TME-IAM is a more efficient trapping agent for endogenous persulfides/polysulfides containing a larger number of sulfur atoms in mouse liver and brain tissues compared with HPE-IAM. Innovation and Conclusions: We developed a novel iodoacetamide derivative, which is the most ideal reagent developed to date for detecting endogenous persulfides/polysulfides formed in biological samples, such as cultured cells, tissues, and plasma. This new probe may be useful for investigating the unique chemical properties of reactive persulfides, thereby enabling identification of novel reactive sulfur metabolites that remain unidentified because of their instability, and thus can be applied in high-precision sulfur metabolomics in redox biology and medicine. We did not perform any clinical experiments in this study. Antioxid. Redox Signal. 34, 1407-1419.

Chemical Tagging of Protein Lipoylation.

Protein lipoylation is a post-translational modification of emerging importance in both prokaryotes and eukaryotes. However, labeling and large-scale profiling of protein lipoylation remain challenging. Here, we report the development of iLCL (iodoacetamide-assisted lipoate-cyclooctyne ligation), a chemoselective reaction that enables chemical tagging of protein lipoylation. We demonstrate that the cyclic disulfide of lipoamide but not linear disulfides can selectively react with iodoacetamide to produce sulfenic acid, which can be conjugated with cyclooctyne probes. iLCL enables tagging of lipoylated proteins for gel-based detection and cellular imaging. Furthermore, we apply iLCL for proteomic profiling of lipoylated proteins in both bacteria and mammalian cells. In addition to all of the eight known lipoylated proteins, we identified seven candidates for novel lipoylated proteins. The iLCL strategy should facilitate uncovering the biological function of protein lipoylation.

Cryo-electron microscopy structures of pyrene-labeled ADP-Pi- and ADP-actin filaments.

Since the fluorescent reagent N-(1-pyrene)iodoacetamide was first used to label skeletal muscle actin in 1981, the pyrene-labeled actin has become the most widely employed tool to measure the kinetics of actin polymerization and the interaction between actin and actin-binding proteins. Here we report high-resolution cryo-electron microscopy structures of actin filaments with N-1-pyrene conjugated to cysteine 374 and either ADP (3.2 Å) or ADP-phosphate (3.0 Å) in the active site. Polymerization buries pyrene in a hydrophobic cavity between subunits along the long-pitch helix with only minor differences in conformation compared with native actin filaments. These structures explain how polymerization increases the fluorescence 20-fold, how myosin and cofilin binding to filaments reduces the fluorescence, and how profilin binding to actin monomers increases the fluorescence.

Design and Evaluation of Artificial Hybrid Photoredox Biocatalysts.

A pair of 9-mesityl-10-phenyl acridinium (Mes-Acr+ ) photoredox catalysts were synthesized with an iodoacetamide handle for cysteine bioconjugation. Covalently tethering of the synthetic Mes-Acr+ cofactors with a small panel of thermostable protein scaffolds resulted in 12 new artificial enzymes. The unique chemical and structural environment of the protein hosts had a measurable effect on the photophysical properties and photocatalytic activity of the cofactors. The constructed Mes-Acr+ hybrid enzymes were found to be active photoinduced electron-transfer catalysts, controllably oxidizing a variety of aryl sulfides when irradiated with visible light, and possessed activities that correlated with the photophysical characterization data. Their catalytic performance was found to depend on multiple factors including the Mes-Acr+ cofactor, the protein scaffold, the location of cofactor immobilization, and the substrate. This work provides a framework toward adapting synthetic photoredox catalysts into artificial cofactors and includes important considerations for future bioengineering efforts.

Mechanistic Studies of Cytochrome P450 3A4 Time-Dependent Inhibition Using Two Cysteine-Targeting Electrophiles.

Experiments designed to identify the mechanism of cytochrome P450 inactivation are critical to drug discovery. Small molecules irreversibly inhibit P450 enzymatic activity via two primary mechanisms: apoprotein adduct formation or heme modification. Understanding the interplay between chemical structures of reactive electrophiles and the impact on CYP3A4 structure and function can ultimately provide insights into drug design to minimize P450 inactivation. In a previous study, raloxifene and N-(1-pyrene) iodoacetamide (PIA) alkylated CYP3A4 in vitro; however, only raloxifene influenced enzyme activity. Here, two alkylating agents with cysteine selectivity, PIA and pyrene maleimide (PM), were used to investigate this apparent compound-dependent disconnect between CYP3A4 protein alkylation and activity loss. The compound's effect on 1) enzymatic activity, 2) carbon monoxide (CO) binding capacity, 3) intact heme content, and 4) protein conformation were measured. Results showed that PM had a large time-dependent loss of enzyme activity, whereas PIA did not. The differential effect on enzymatic activity between PM and PIA was mirrored in the CO binding data. Despite disruption of CO binding, neither compound affected the heme concentrations, inferring there was no destruction or alkylation of the heme. Lastly, differential scanning fluorescence showed PM-treated CYP3A4 caused a shift in the onset temperature required to induce protein aggregation, which was not observed for CYP3A4 treated with PIA. In conclusion, alkylation of CYP3A4 apoprotein can have a variable impact on catalytic activity, CO binding, and protein conformation that may be compound-dependent. These results highlight the need for careful interpretation of experimental results aimed at characterizing the nature of P450 enzyme inactivation. SIGNIFICANCE STATEMENT: Understanding the mechanism of CYP3A4 time-dependent inhibition is critical to drug discovery. In this study, we use two cysteine-targeting electrophiles to probe how subtle variation in inhibitor structure may impact the mechanism of CYP3A4 time-dependent inhibition and confound interpretation of traditional diagnostic experiments. Ultimately, this simplified system was used to reveal insights into CYP3A4 biochemical behavior. The insights may have implications that aid in understanding the susceptibility of CYP enzymes to the effects of electrophilic intermediates generated via bioactivation.

Integrated microfluidic chip for on-line proteome analysis with combination of denaturing and rapid digestion of protein.

A microfluidic platform based on the integration of denaturation and online immobilized enzyme reactor (IMER) digestion for protein pretreatment was first developed on a glass chip. The design of three inlet channels and two groups of snake channel in glass chip can allow the protein solution, the reducing reagent and the alkylating agent to be simultaneously injected into the chip channel and ensured the reaction solution on-line efficient mixing and sufficient reacting. By thiol-ene click chemistry, the capillary-based and glass chip-based trypsin IMER on the surface of poly(trimethylolpropane trimethacrylate) monolith were fabricated. The wide range of flow rate tolerance (0.8-5.0 µL/min), and the acceptable reproducibility (RSD% = 3.1%, n = 5) and stability (13.8% decrease of enzyme activity in 2 months) indicated the feasibility of using IMER for online digestion of proteins. Compared with the solution denaturation-offline IMER digestion, the integrated microfluidic platform of chip denaturation-chip IMER and chip denaturation-online IMER have comparable protein identification ability for mouse liver protein with a similar number of protein (798 or 826 vs. 843) and unique peptides (3923 or 4593 vs. 3916). More importantly, the easy and fast digestion of protein samples and possible combination with MS revealed that this microfluidic platform can be a potential method for rapid proteomics analysis.

Profiling Cysteine Reactivity and Oxidation in the Endoplasmic Reticulum.

The endoplasmic reticulum (ER) is the initial site of biogenesis of secretory pathway proteins, including proteins localized to the ER, Golgi, lysosomes, intracellular vesicles, plasma membrane, and extracellular compartments. Proteins within the secretory pathway contain a high abundance of disulfide bonds to protect against the oxidative extracellular environment. These disulfide bonds are typically formed within the ER by a variety of oxidoreductases, including members of the protein disulfide isomerase (PDI) family. Here, we establish chemoproteomic platforms to identify oxidized and reduced cysteine residues within the ER. Subcellular fractionation methods were utilized to enrich for the ER and significantly enhance the coverage of ER-localized cysteine residues. Reactive-cysteine profiling ranked ∼900 secretory pathway cysteines by reactivity with an iodoacetamide-alkyne probe, revealing functional cysteines annotated to participate in disulfide bonds, or S-palmitoylation sites within proteins. Through application of a variation of the OxICAT protocol for quantifying cysteine oxidation, the percentages of oxidation for each of ∼700 ER-localized cysteines were calculated. Lastly, perturbation of ER function, through chemical induction of ER stress, was used to investigate the effect of initiation of the unfolded protein response (UPR) on ER-localized cysteine oxidation. Together, these studies establish a platform for identifying reactive and functional cysteine residues on proteins within the secretory pathway as well as for interrogating the effects of diverse cellular stresses on ER-localized cysteine oxidation.

Biotinylating Antibodies Using Biotin Polyethylene Oxide (PEO) Iodoacetamide.

There are several techniques for biotinylating antibodies, from the most basic (using NHS-ester biotin to label primary amines) to more complex experiments (modifying sulfhydryls and carbohydrates). Biotinylation of free sulfhydryls, described here, can be effectively mediated using haloacetyl biotin derivatives. To modify an antibody using this reagent, sulfhydryls must be available. Digestion of antibodies by the enzyme pepsin produces F(ab')2 fragments, which can be separated by mild reduction into two sulfhydryl-containing, univalent Fab' fragments. Alternatively, thiol groups can be added by modifying amines with an appropriate cross-linker.

Synthesis of chitosan iodoacetamides via carbodiimide coupling reaction: Effect of degree of substitution on the hemostatic properties.

Uncontrolled hemorrhage continues to be the leading cause of death from traumatic injuries both in the battlefield and in the civilian life. Chitosan is among the very few materials that have made the short list of military recommended field-deployable hemostatic dressings. However, the detailed mechanism of its action is still not fully understood. Moreover, in the cases when patients developed coagulopathy, the efficacy of the dressings rely solely on those mechanisms that work outside of the regular blood coagulation cascade. In addition to the well-known erythrocyte agglutination, we proposed to use the reactive N-iodoacetyl group on a new chitosan derivative to accelerate hemostasis. In this paper, we describe the synthesis of chitosan iodoacetamide (CI) with considerations of the stoichiometry among the reagents, the choice of solvent, the pH of the reaction medium, and the reaction time. The reaction was confirmed by FT-IR, 1H and 13C NMR, elemental analysis, iodine content analysis, and SEM-EDS. Water contact angle measurements and Erythrocyte Sedimentation Rate (ESR) method were used to evaluate the hemostatic potential of the newly synthesized CI as a function of their degree of substitution (DS). The range of DS was 5.9% to 27.8% for CI. The mid-range of DS gave the best results for the ESR. CIs exhibit favorable cytocompatibilities up to DS 18.7 compared to the generic unmodified chitosan. In general, the biocompatibility of chitosan iodoacetamide slightly declined with increasing the iodide content up to DS 21.5 owing to its affinity to SH groups of cells.

Exploring the nature of inclusion bodies by MALDI mass spectrometry using recombinant proinsulin as a model protein.

The present study deals with mass spectrometric investigation to characterize the nature of proinsulin in inclusion bodies. Various derivatives of human proinsulin were cloned, expressed in E. coli and inclusion bodies prepared under weak acidic conditions (pH 6.5), which protected the native thiols. Non-reductive PAGE showed that proinsulin migrated as monomer (approximately 10 kDa). MALDI-MS protocol was developed for the direct analysis of proinsulin derivatives in inclusion bodies. It was found that the masses of the derivatives corresponded to polypeptides containing six cysteines in reduced form. Iodoacetamide or iodoacetic acid treatment of proinsulin inclusion bodies, in suspension under non-reducing conditions and without any chaotropic agents, showed six alkylations, suggesting that these cytoplasmic aggregates were assembled from reduced monomers, with their -SH groups pointing towards hydrophilic surface. The MALDI analysis of inclusion bodies was extended to a proinsulin derivatives labelled with 13C and 15N giving an excellent agreement between experimental and theoretical masses. These mass spectrometric studies also provide early information about post-translational modification as evident in one of the derivatives MTRR-pi showing N-terminal cleavage of methionine. This shows the potential value of the protocol for the accurate analysis of polypeptides, expressed as inclusion bodies, prior to undertaking further purification.

Major cause of antibody artifact bands on non-reducing SDS-PAGE and methods for minimizing artifacts.

When monoclonal antibodies (mAbs) are analysed by non-reducing sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), method-induced artifacts are a frequent phenomenon. Previous studies suggested that incomplete denaturation and disulfide-bond scrambling are two main causes of artifact bands. Thus, in practice samples are normally heated and treated with alkylating agent iodoacetamide (IAM) before loading to promote denaturation and block free sulfhydryl groups, respectively. In this work, we further studied the major cause of artifact bands on non-reducing SDS-PAGE and ways of eliminating artifacts with two purified mAbs. In both cases, it was found that artifact bands on non-gradient Tris-glycine gels are mainly caused by incomplete denaturation under typical gel conditions. In general, heating minimizes artifact bands due to incomplete denaturation but it also generates some extra bands. Combining heating with IAM treatment achieved slightly better results than heating alone. As an alternative to heating, treating the samples with 8 M urea also allows close to complete denaturation of samples and thus minimizes artifact bands. In addition, we learned that untreated samples (samples that are not heated or treated with urea) may look different on Bis-Tris gel depending on gel composition (non-gradient vs. gradient) and the buffer used (MES vs. MOPS). In certain case, the apparent lack of artifact bands on gradient Bis-Tris gel may be in fact due to insufficient resolution. In conclusion, this study further confirmed that full-denaturation of sample is critical for minimizing/avoiding artifact bands on non-reducing SDS-PAGE.

A redox sensitivity-based method to quantify both pentameric and monomeric C-reactive protein in a single assay.

C-reactive protein (CRP) can exist in both pentameric (pCRP) and monomeric conformation (mCRP). Though serum pCRP is an established marker of inflammation, the diagnostic significance of mCRP remains unknown largely due to the lack of a reliable assay. The power and specificity of antibody-based assays are limited by the antibody reagents used and by the degree of cross-reactivity that may exist in detecting each antigen, as mCRP is known to be formed from the pentameric and both conformations usually coexist in clinical samples. Here, we describe an assay that measures both CRP conformations in simple samples in a single assay. This assay depends on the rationale that the intra-molecular disulfide bonds in pCRP resist reduction, while those in mCRP can be readily reduced. The distinct sensitivity of pCRP and mCRP to reduction can be easily detected and separated by electrophoresis. This assay may provide a means to study clinical correlation between pCRP and mCRP in clinical samples in the future and to evaluate their respective significance as disease markers.

Cysteine-Selective Phosphonamidate Electrophiles for Modular Protein Bioconjugations.

We describe a new technique in protein synthesis that extends the existing repertoire of methods for protein modification: A chemoselective reaction that induces reactivity for a subsequent bioconjugation. An azide-modified building block reacts first with an ethynylphosphonite through a Staudinger-phosphonite reaction (SPhR) to give an ethynylphosphonamidate. The resulting electron-deficient triple bond subsequently undergoes a cysteine-selective reaction with proteins or antibodies. We demonstrate that ethynylphosphonamidates display excellent cysteine-selective reactivity combined with superior stability of the thiol adducts, when compared to classical maleimide linkages. This turns our technique into a versatile and powerful tool for the facile construction of stable functional protein conjugates.

Speciation of reactive sulfur species and their reactions with alkylating agents: do we have any clue about what is present inside the cell?

BACKGROUND AND PURPOSE: Posttranslational modifications of cysteine residues represent a major aspect of redox biology, and their reliable detection is key in providing mechanistic insights. The metastable character of these modifications and cell lysis-induced artifactual oxidation render current state-of-the-art protocols to rely on alkylation-based stabilization of labile cysteine derivatives before cell/tissue rupture. An untested assumption in these procedures is that for all cysteine derivatives, alkylation rates are faster than their dynamic interchange. However, when the interconversion of cysteine derivatives is not rate limiting, electrophilic labelling is under Curtin-Hammett control; hence, the final alkylated mixture may not represent the speciation that prevailed before alkylation. EXPERIMENTAL APPROACH: Buffered aqueous solutions of inorganic, organic, cysteine, GSH and GAPDH polysulfide species were used. Additional experiments in human plasma and serum revealed that monobromobimane can extract sulfide from the endogenous sulfur pool by shifting speciation equilibria, suggesting caution should be exercised when interpreting experimental results using this tool. KEY RESULTS: In the majority of cases, the speciation of alkylated polysulfide/thiol derivatives depended on the experimental conditions. Alkylation perturbed sulfur speciation in both a concentration- and time-dependent manner and strong alkylating agents cleaved polysulfur chains. Moreover, the labelling of sulfenic acids with dimedone also affected cysteine speciation, suggesting that part of the endogenous pool of products previously believed to represent sulfenic acid species may represent polysulfides. CONCLUSIONS AND IMPLICATIONS: We highlight methodological caveats potentially arising from these pitfalls and conclude that current derivatization strategies often fail to adequately capture physiological speciation of sulfur species. LINKED ARTICLES: This article is part of a themed section on Chemical Biology of Reactive Sulfur Species. To view the other articles in this section visit http://onlinelibrary.wiley.com/doi/10.1111/bph.v176.4/issuetoc.