RESUMO
Near-infrared (NIR) radiation plays an important role in guided external stimulus therapies; its application in bone-related treatments is becoming more and more frequent. Therefore, metallic biomaterials that exhibit properties activated by NIR are promising for further orthopedic procedures. In this work, we present an adapted electroforming approach to attain a biomorphic nano-holed TiO2 coating on Ti6Al4V alloy. Through a precise control of the anodization conditions, structures revealed the formation of localized nano-pores arranged in a periodic assembly. This specific organization provoked higher stability against thermal oxidation and precise hydrophobic wettability behavior according to Cassie-Baxter's model; both characteristics are a prerequisite to ensure a favorable biological response in an implantable structure for guided bone regeneration. In addition, the periodically arranged sub-wavelength-sized unit cell on the metallic-dielectric structure exhibits a peculiar optical response, which results in higher NIR reflectivity. Accordingly, we have proved that this effect enhances the efficiency of the scattering processes and provokes a significant improvement of light confinement producing a spontaneous NIR fluorescence emission. The combination of the already favorable mechanical and biocompatibility properties of Ti6Al4V, along with suitable thermal stability, wetting, and electro-optical behavior, opens a promising path toward strategic bone therapeutic procedures.
Assuntos
Ligas/química , Materiais Biomiméticos/química , Materiais Revestidos Biocompatíveis/química , Ligas/efeitos da radiação , Materiais Biomiméticos/efeitos da radiação , Materiais Revestidos Biocompatíveis/efeitos da radiação , Interações Hidrofóbicas e Hidrofílicas , Raios Infravermelhos , Porosidade , Titânio/química , Titânio/efeitos da radiação , MolhabilidadeRESUMO
To solve the poor sustainability of electroactive stimulation in clinical therapy, a strategy of combining a piezoelectric BaTiO3-coated Ti6Al4V scaffold and low-intensity pulsed ultrasound (LIPUS) was unveiled and named here as piezodynamic therapy. Thus, cell behavior could be regulated phenomenally by force and electricity simultaneously. First, BaTiO3 was deposited uniformly on the surface of the three-dimensional (3D) printed porous Ti6Al4V scaffold, which endowed the scaffold with excellent force-electricity responsiveness under pulsed ultrasound exposure. The results of live/dead staining, cell scanning electron microscopy, and F-actin staining showed that cells had better viability, better pseudo-foot adhesion, and more muscular actin bundles when they underwent the piezodynamic effect of ultrasound and piezoelectric coating. This piezodynamic therapy activated more mitochondria at the initial stage that intervened in the cell cycle by promoting cells' proliferation and weakened the apoptotic damage. The quantitative real-time polymerase chain reaction data further confirmed that the costimulation of the ultrasound and the piezoelectric scaffolds could trigger adequate current to upregulated the expression of osteogenic-related genes. The continuous electric cues could be generated by the BaTiO3-coated scaffold and intermittent LIPUS stimulation; thereon, more efficient bone healing would be promoted by piezodynamic therapy in future treatment.
Assuntos
Ligas/química , Compostos de Bário/química , Alicerces Teciduais/química , Titânio/química , Ondas Ultrassônicas , Ligas/efeitos da radiação , Animais , Apoptose/efeitos dos fármacos , Compostos de Bário/efeitos da radiação , Adesão Celular/efeitos dos fármacos , Diferenciação Celular/efeitos dos fármacos , Proliferação de Células/efeitos dos fármacos , Sobrevivência Celular/efeitos dos fármacos , Potencial da Membrana Mitocondrial/efeitos dos fármacos , Células-Tronco Mesenquimais/efeitos dos fármacos , Mitocôndrias/efeitos dos fármacos , Osteogênese/efeitos dos fármacos , Porosidade , Pseudópodes/efeitos dos fármacos , Ratos Sprague-Dawley , Titânio/efeitos da radiação , MolhabilidadeRESUMO
The method of pulsed laser processing with a nanosecond pulse duration was employed to obtain a nanotexture on the surface of copper alloys. The effect of the obtained micro- and nanotexture on the bactericidal properties of the surface upon its contact with suspensions containing of E. coli K12 C600 or K. pneumoniae 811 cells in a nutrient medium were studied. The evolution of cell morphology after on the nanotextured surface was analyzed using scanning electron microscopy, and changes in biological fluid during this contact were studied by mass spectrometry. It was shown that massive death of bacterial cells both in the suspension and on the nanotextured surface was determined by combined toxic effects of the hierarchically textured surface and high concentration of Cu2+ ions in the medium.
Assuntos
Ligas/farmacologia , Antibacterianos/farmacologia , Cobre/farmacologia , Escherichia coli K12/efeitos dos fármacos , Klebsiella pneumoniae/efeitos dos fármacos , Nanopartículas/toxicidade , Ligas/química , Ligas/efeitos da radiação , Antibacterianos/química , Antibacterianos/efeitos da radiação , Cobre/química , Cobre/efeitos da radiação , Escherichia coli K12/crescimento & desenvolvimento , Escherichia coli K12/ultraestrutura , Interações Hidrofóbicas e Hidrofílicas , Klebsiella pneumoniae/crescimento & desenvolvimento , Klebsiella pneumoniae/ultraestrutura , Lasers , Testes de Sensibilidade Microbiana , Microscopia Eletrônica de Varredura , Nanopartículas/química , Nanopartículas/efeitos da radiação , Propriedades de SuperfícieRESUMO
Background/Aims: Radiopaque metal markers are required to improve X-ray absorption by self-expandable metal stents (SEMSs) to enable precise stent placement. A new tantalum radiopaque marker was recently developed using an ultrasonic spray technique. The aim of the present study was to evaluate the safety and visibility of tantalum markers. Methods: A total of three beagle dogs were used for a gastrointestinal tract absorption test. Five tantalum markers were placed in the stomach of each dog endoscopically. Excreted tantalum markers were collected, and their weights were compared to the original weights. In radiopacity tests, marker radiopacities on X-ray images were quantified using ImageJ software and compared with those of commercially available metal markers. Finally, the radiographic images of six patients who underwent biliary SEMS placement using tantalum marker Nitinol SEMSs (n=3) or gold marker Nitinol SEMSs (n=3) were compared with respect to marker brightness on fluoroscopic images. Results: Absorption testing showed that the marker structures and weights were unaffected. Radiopacity tests showed that the mean brightness and total brightness scores were greater for tantalum markers (226.22 and 757, respectively) than for gold (A, 209 and 355, respectively; B, 204.96 and 394, respectively; C, 194.34 and 281, respectively) or platinum markers (D, 203.6 and 98, respectively). On fluoroscopic images, tantalum markers had higher brightness and total brightness scores (41.47 and 497.67, respectively) in human bile ducts than gold markers (28.37 and 227, respectively). Conclusions: Tantalum markers were found to be more visible than other commercially available markers in X-ray images and to be resistant to gastrointestinal absorption.
Assuntos
Meios de Contraste/efeitos da radiação , Radiografia , Stents Metálicos Autoexpansíveis , Tantálio/efeitos da radiação , Ligas/efeitos da radiação , Animais , Ductos Biliares/cirurgia , Cães , Marcadores Fiduciais , Humanos , Teste de MateriaisRESUMO
Although magnesium and magnesium alloys are considered biocompatible and biodegradable, they suffer from poor corrosion performance in the human body environment. In light of this, surface modification via rapid surface melting of AZ31B Mg alloy using a continuous-wave Nd:YAG laser was conducted. Laser processing was performed with laser energy ranging from 1.06 to 3.18 J/mm2. The corrosion behavior in simulated body fluid of laser surface-treated and untreated AZ31B Mg alloy samples was evaluated using electrochemical technique. The effect of laser surface treatment on phase and microstructure evolution was evaluated using X-ray diffraction and scanning electron microscopy. Microstructure examination revealed grain refinement as well as formation and uniform distribution of Mg17Al12 phase along the grain boundary for laser surface-treated samples. Evolution of such unique microstructure during laser surface treatment indicated enhancement in the corrosion resistance of laser surface-treated samples compared to untreated alloy.
Assuntos
Ligas/química , Ligas/efeitos da radiação , Materiais Biocompatíveis/química , Materiais Biocompatíveis/efeitos da radiação , Lasers , Magnésio/química , Magnésio/efeitos da radiação , Teste de Materiais/métodos , Próteses e Implantes , Corrosão , Técnicas Eletroquímicas , Humanos , Microscopia Eletrônica de Varredura , Propriedades de Superfície , Difração de Raios XRESUMO
Ti-Nb alloys are excellent candidates for biomedical applications such as implantology and joint replacement because of their very low elastic modulus, their excellent biocompatibility and their high strength. A low elastic modulus, close to that of the cortical bone minimizes the stress shielding effect that appears subsequent to the insertion of an implant. The objective of this study is to investigate the microstructural and mechanical properties of a Ti-Nb alloy elaborated by selective laser melting on powder bed of a mixture of Ti and Nb elemental powders (26 at.%). The influence of operating parameters on porosity of manufactured samples and on efficacy of dissolving Nb particles in Ti was studied. The results obtained by optical microscopy, SEM analysis and X-ray microtomography show that the laser energy has a significant effect on the compactness and homogeneity of the manufactured parts. Homogeneous and compact samples were obtained for high energy levels. Microstructure of these samples has been further characterized. Their mechanical properties were assessed by ultrasonic measures and the Young's modulus found is close to that of classically elaborated Ti-26 Nbingot.
Assuntos
Ligas/química , Lasers , Nióbio/química , Titânio/química , Ligas/efeitos da radiação , Materiais Biocompatíveis/química , Módulo de Elasticidade , Microscopia Eletrônica de Varredura , Porosidade , Difração de Raios XRESUMO
PURPOSE: Ultraviolet-mediated photofunctionalization is a new technology to improve bone and titanium integration. We hypothesized that photofunctionalization would enhance the stability of titanium screws used for segmental bone defects. MATERIALS AND METHODS: Disks were prepared of a titanium alloy (Ti6Al4V) for an in vitro study to evaluate the attachment, proliferation, and differentiation of osteoblasts. Commercially available Ti6Al4V screws were used in vivo. Segmental bone defects were created in rat femurs as an immediate loading reconstruction model. The defects were reconstructed with commercially available titanium plates and Ti6Al4V screws, with or without photofunctionalization. The screw survival rates and mechanical stability were evaluated at 2 and 4 weeks, and the bone formation around the screws was analyzed. RESULTS: Osteoblasts showed greater attachment, proliferation, and differentiation on the photofunctionalized Ti6Al4V disks. Photofunctionalized screws had significantly greater survival rates and mechanical stability at 2 and 4 weeks. The bone formation around the photofunctionalized screws was significantly greater than that around the untreated screws at 4 weeks. CONCLUSIONS: The results of the present study have demonstrated the efficacy of photofunctionalization on enhancing the survival and stability of Ti6Al4V screws under a loaded condition in the reconstruction of segmental defects. This was associated with increased bioactivity and bone formation around the photofunctionalized Ti6Al4V material.
Assuntos
Ligas/efeitos da radiação , Materiais Biocompatíveis/efeitos da radiação , Parafusos Ósseos , Interface Osso-Implante/efeitos da radiação , Fêmur/cirurgia , Titânio/efeitos da radiação , Raios Ultravioleta , Ligas/química , Animais , Materiais Biocompatíveis/química , Doenças Ósseas/cirurgia , Placas Ósseas , Adesão Celular/fisiologia , Diferenciação Celular/fisiologia , Proliferação de Células/fisiologia , Células Cultivadas , Masculino , Teste de Materiais , Microscopia Eletrônica de Varredura , Osteoblastos/fisiologia , Osteogênese/fisiologia , Ratos , Ratos Sprague-Dawley , Procedimentos de Cirurgia Plástica/instrumentação , Espectrometria por Raios X , Estresse Mecânico , Análise de Sobrevida , Fatores de Tempo , Titânio/químicaRESUMO
The challenge of fine compositional tuning and microstructure control in complex oxides is overcome by developing a general two-step synthetic approach. Antimony-alloyed bismuth vanadate, which is identified as a novel light absorber for solar fuel applications, is prepared in a wide compositional range. The bandgap of this quaternary oxide linearly decreases with the Sb content, in agreement with first-principles calculations.
Assuntos
Antimônio/química , Antimônio/efeitos da radiação , Bismuto/química , Bismuto/efeitos da radiação , Luz , Vanadatos/química , Vanadatos/efeitos da radiação , Ligas/química , Ligas/efeitos da radiação , Modelos Químicos , Oxirredução , Processos Fotoquímicos , Energia Solar , Análise Espectral , Difração de Raios XRESUMO
The applications of hierarchical micro/nano-structures, which possess properties of two-scale roughness, have been studied in various fields. In this study, hierarchical periodic micro/nano-structures were fabricated on nitinol, an equiatomic Ni-Ti alloy, using a femtosecond laser for the surface modification of intravascular stents. By controlling the laser fluence, two types of surfaces were developed: periodic nano- and micro/nano-structures. Evaluation of water contact angles indicated that the nano-surface was hydrophilic and the micro/nano-surface was hydrophobic. Endothelial cells aligned along the nano-structures on both surfaces, whereas platelets failed to adhere to the micro/nano-surface. Decorrelation between the responses of the two cell types and the results of water contact angle analysis were a result of the pinning effect. This is the first study to show the applicability of hierarchical periodic micro/nano-structures for surface modification of nitinol.
Assuntos
Ligas/química , Materiais Biocompatíveis/química , Plaquetas/fisiologia , Células Endoteliais/fisiologia , Nanopartículas Metálicas/química , Adesividade Plaquetária/fisiologia , Ligas/efeitos da radiação , Animais , Materiais Biocompatíveis/efeitos da radiação , Plaquetas/citologia , Polaridade Celular , Células Cultivadas , Células Endoteliais/citologia , Interações Hidrofóbicas e Hidrofílicas/efeitos da radiação , Lasers , Nanopartículas Metálicas/efeitos da radiação , Nanopartículas Metálicas/ultraestrutura , Propriedades de Superfície/efeitos da radiação , SuínosRESUMO
Laser Engineered Net Shaping (LENS™), a commercially available additive manufacturing technology, has been used to fabricate dense equiatomic NiTi alloy components. The primary aim of this work is to study the effect of laser power and scan speed on microstructure, phase constituents, hardness and corrosion behavior of laser processed NiTi alloy. The results showed retention of large amount of high-temperature austenite phase at room temperature due to high cooling rates associated with laser processing. The high amount of austenite in these samples increased the hardness. The grain size and corrosion resistance were found to increase with laser power. The surface energy of NiTi alloy, calculated using contact angles, decreased from 61 mN/m to 56 mN/m with increase in laser energy density from 20 J/mm(2) to 80 J/mm(2). The decrease in surface energy shifted the corrosion potentials to nobler direction and decreased the corrosion current. Under present experimental conditions the laser power found to have strong influence on microstructure, phase constituents and corrosion resistance of NiTi alloy.
Assuntos
Ligas/química , Ligas/efeitos da radiação , Lasers , Níquel/química , Níquel/efeitos da radiação , Titânio/química , Titânio/efeitos da radiação , Corrosão , Relação Dose-Resposta à Radiação , Doses de Radiação , Propriedades de Superfície/efeitos da radiaçãoRESUMO
OBJECTIVE: Microwaves are used in one method of physical therapy and can increase muscle tissue temperature which is useful for improving muscle, tendon and bone injuries. In the study, we sought to determine whether titanium alloy internal fixations influence apoptosis in tissues subjected to microwave treatments at 2,450 MHz and 40 W during the healing of fractures because this issue is not yet fully understood. METHODS: In this study, titanium alloy internal fixations were used to treat 3.0-mm transverse osteotomies in the middle of New Zealand rabbits' femurs. After the operation, 30-day microwave treatments were applied to the 3.0 mm transverse osteotomies 3 days after the operation. The changes in the temperatures of the muscle tissues in front of the implants or the 3.0 mm transverse osteotomies were measured during the microwave treatments. To characterize the effects of titanium alloy internal fixations on apoptosis in the muscles after microwave treatment, we performed TUNEL assays, fluorescent real-time (quantitative) PCR, western blotting analyses, reactive oxygen species (ROS) detection and transmission electron microscopy examinations. RESULTS: The temperatures were markedly increased in the animals with the titanium alloy implants. Apoptosis in the muscle cells of the implanted group was significantly more extensive than that in the non-implanted control group at different time points. Transmission electron microscopy examinations of the skeletal muscles of the implanted groups revealed muscular mitochondrial swelling, vacuolization. ROS, Bax and Hsp70 were up-regulated, and Bcl-2 was down-regulated in the implanted group. CONCLUSION: Our results suggest that titanium alloy internal fixations caused greater muscular tissue cell apoptosis following 2,450 MHz, 40 W microwave treatments in this rabbit femur fracture models.
Assuntos
Ligas/efeitos da radiação , Diatermia/efeitos adversos , Fêmur/lesões , Fixação Interna de Fraturas/instrumentação , Consolidação da Fratura/efeitos da radiação , Fixadores Internos , Micro-Ondas/efeitos adversos , Mitocôndrias Musculares/patologia , Titânio/efeitos da radiação , Animais , Temperatura Corporal , Diatermia/métodos , Fêmur/patologia , Perfilação da Expressão Gênica , Proteínas de Choque Térmico HSP70/biossíntese , Proteínas de Choque Térmico HSP70/genética , Temperatura Alta/efeitos adversos , Marcação In Situ das Extremidades Cortadas , Fixadores Internos/efeitos adversos , Masculino , Micro-Ondas/uso terapêutico , Proteínas Musculares/biossíntese , Proteínas Musculares/genética , Músculo Esquelético/patologia , Osteotomia , Proteínas Proto-Oncogênicas c-bcl-2/biossíntese , Proteínas Proto-Oncogênicas c-bcl-2/genética , Coelhos , Espécies Reativas de Oxigênio/análise , Proteína X Associada a bcl-2/biossíntese , Proteína X Associada a bcl-2/genéticaRESUMO
Transition metal dichalcogenides (TMDs) have emerged as a new class of two-dimensional materials that are promising for electronics and photonics. To date, optoelectronic measurements in these materials have shown the conventional behavior expected from photoconductors such as a linear or sublinear dependence of the photocurrent on light intensity. Here, we report the observation of a new regime of operation where the photocurrent depends superlinearly on light intensity. We use spatially resolved photocurrent measurements on devices consisting of CVD-grown monolayers of TMD alloys spanning MoS2 to MoSe2 to show the photoconductive nature of the photoresponse, with the photocurrent dominated by recombination and field-induced carrier separation in the channel. Time-dependent photoconductivity measurements show the presence of persistent photoconductivity for the S-rich alloys, while photocurrent measurements at fixed wavelength for devices of different alloy compositions show a systematic decrease of the responsivity with increasing Se content associated with increased linearity of the current-voltage characteristics. A model based on the presence of different types of recombination centers is presented to explain the origin of the superlinear dependence on light intensity, which emerges when the nonequilibrium occupancy of initially empty fast recombination centers becomes comparable to that of slow recombination centers.
Assuntos
Dissulfetos/química , Dissulfetos/efeitos da radiação , Eletroquímica/instrumentação , Nanopartículas Metálicas/química , Nanopartículas Metálicas/efeitos da radiação , Molibdênio/química , Molibdênio/efeitos da radiação , Fotoquímica/instrumentação , Ligas/química , Ligas/efeitos da radiação , Cristalização/métodos , Condutividade Elétrica , Desenho de Equipamento , Análise de Falha de Equipamento , Gases/química , Luz , Modelos Lineares , Teste de Materiais , Modelos Químicos , Nanotecnologia/instrumentação , Nanotecnologia/métodos , Doses de RadiaçãoRESUMO
Nanoscale surface modification of medical grade metallic alloys was conducted using a neodymium-doped yttrium aluminum garnet laser-based dopant diffusion technique. The objective of this approach was to minimize the induction heating by reducing the absorbed radio frequency field. Such an approach is advantageous in that the dopant is diffused into the alloy and is not susceptible to detachment or spallation as would an externally applied coating, and is expected to not deteriorate the mechanical and electrical properties of the base alloy or device. Experiments were conducted using a controlled environment laser system with the ability to control laser properties (i.e., laser power, spot size, and irradiation time) and dopant characteristics (i.e., temperature, concentration, and pressure). The reflective and transmissive properties of both the doped and untreated samples were measured in a radio frequency (63.86 MHz) magnetic field using a system comprising a high power signal generator, a localized magnetic field source and sensor, and a signal analyzer. The results indicate an increase in the reflectivity of the laser-treated samples compared to untreated samples. The effect of reflectivity on the heating of the alloys is investigated through a mathematical model incorporating Maxwell's equations and heat conduction.
Assuntos
Ligas/química , Materiais Biocompatíveis/química , Temperatura Alta , Lasers , Imageamento por Ressonância Magnética , Modelos Químicos , Ligas/efeitos da radiação , Materiais Biocompatíveis/efeitos da radiação , Simulação por Computador , Relação Dose-Resposta à Radiação , Campos Magnéticos , Teste de Materiais , Doses de Radiação , Propriedades de Superfície/efeitos da radiaçãoRESUMO
A process to surface pattern polydimethylsiloxane (PDMS) with ferromagnetic structures of varying sizes (micrometer to millimeter) and thicknesses (>70 µm) is developed. Their flexibility and magnetic reach are utilized to confer dynamic, additive properties to a variety of substrates, such as coverslips and Eppendorf tubes. It is found that these substrates can generate additional modes of magnetic droplet manipulation, and can tunably steer magnetic-cell organization.
Assuntos
Ligas/química , Dimetilpolisiloxanos/química , Galvanoplastia/métodos , Imãs , Técnicas Analíticas Microfluídicas/instrumentação , Ligas/efeitos da radiação , Cristalização , Dimetilpolisiloxanos/efeitos da radiação , Módulo de Elasticidade , Desenho de Equipamento , Análise de Falha de Equipamento , Campos Magnéticos , Teste de Materiais , Miniaturização , Tamanho da PartículaRESUMO
Resistivity ρ(T), Hall coefficient RH(T), superconducting transition temperature Tc and slopes of the upper critical field dHc2/dT were studied in (Ba1-xKx)Fe2As2 (x = 0.218, 0.356, 0.531) single crystals irradiated with fast neutrons. It is found that dTc/dρSC-the rate of decreasing Tc as a function of the ρSC (ρSC is the resistivity at T = Tc)-linearly increases with concentration x. Slow changes in the Hall coefficient RH, as well as the quadratic electronic contribution to the resistivity, show that there are no substantial changes in the topology of the Fermi surface caused by irradiation. The slopes of the upper critical field dHc2/dT in ab and c directions as a function of ρSC determined by Hall measurements show a reasonable agreement with a model that suggests constancy of the band parameters.
Assuntos
Arsênio/química , Bário/química , Ferro/química , Modelos Químicos , Potássio/química , Ligas/química , Ligas/efeitos da radiação , Arsênio/efeitos da radiação , Bário/efeitos da radiação , Simulação por Computador , Cristalização , Condutividade Elétrica , Impedância Elétrica , Ferro/efeitos da radiação , Campos Magnéticos , Nêutrons , Potássio/efeitos da radiação , Doses de Radiação , Temperatura de TransiçãoRESUMO
Laser shock processing (LSP) is an innovative surface treatment technique with high peak power, short pulse, and cold hardening for strengthening metal materials. LSP is based on the application of a high intensity pulsed laser beam (I > 1 GW/cm(2); t < 50 ns) at the interface between the metallic target and the surrounding medium (a transparent confining material, normally water) forcing a sudden vaporization of the metallic surface into a high temperature and density plasma that immediately develops inducing a shock wave propagating into the material. The shock wave induces plastic deformation and a residual stress distribution in the target material. In this paper we study the increase of microhardness and surface roughness with the increase of laser pulse energy in 2024-T3 Al alloy. The influence of the thickness of the confining layer (water) on microhardness and surface roughness is also studied. In addition, the effect of LSP treatment with best conditions on wear behaviors of the alloy was investigated.
Assuntos
Ligas/química , Ligas/efeitos da radiação , Alumínio/química , Alumínio/efeitos da radiação , Lasers , Corrosão , Dureza/efeitos da radiação , Teste de Materiais , Doses de Radiação , Propriedades de Superfície/efeitos da radiaçãoRESUMO
It is known that the main factors in a variation in the shape memory alloy properties under insonation are heating of the material and alternate stresses action. In the present work the experimental study of the mechanical behaviour and functional properties of shape memory alloy under the action of alternate stresses and varying temperature was carried out. The data obtained had demonstrated that an increase in temperature of the sample resulted in a decrease or increase in deformation stress depending on the structural state of the TiNi sample. It was shown that in the case of the alloy in the martensitic state, a decrease in stress was observed, and on the other hand, in the austenitic state an increase in stress took place. It was found that action of alternate stresses led to appearance of strain jumps on the strain-temperature curves during cooling and heating the sample through the temperature range of martensitic transformation under the constant stress. The value of the strain jumps depended on the amplitude of alternate stresses and the completeness of martensitic transformation. It was shown that the heat action of ultrasonic vibration to the mechanical behaviour of shape memory alloys was due to the non-monotonic dependence of yield stress on the temperature. The force action of ultrasonic vibration to the functional properties was caused by formation of additional oriented martensite.
Assuntos
Ondas de Choque de Alta Energia , Níquel/química , Níquel/efeitos da radiação , Sonicação/métodos , Titânio/química , Titânio/efeitos da radiação , Ligas/química , Ligas/efeitos da radiação , Módulo de Elasticidade/efeitos da radiação , Dureza/efeitos da radiação , Teste de Materiais , Estresse Mecânico , Temperatura , VibraçãoRESUMO
BACKGROUND: The use of ethylene-vinyl alcohol copolymer for liquid embolization of cranial vascular lesions has resulted in microcatheter fragments entrapped in patients following endovascular procedures. Undergoing subsequent diagnostic MRI examinations poses a safety concern due to the possibility of radiofrequency heating of the metallic braid incorporated into the microcatheter. Heating of nitinol, tungsten, and polyetheretherketone (PEEK) braided microcatheters was assessed and compared using a phantom model. METHODS: Microcatheters coupled with fluoroptic temperature probes were embedded in a polyacrylamide gel within a head and torso phantom. Experiments were performed at 1.5 T and 3 T, analyzing the effects of different catheter immersion lengths, specific absorption rate (SAR) levels, short clinical scans, long clinical scans, and microcatheter fragment lengths. RESULTS: The maximal increase in temperature for the nitinol braided microcatheter during a 15 min scan was 3.06°C using the T1 fast spin echo sequence at 1.5 T and 0.45°C using the balanced steady state free precession sequence at 3 T. The same scans for fragment lengths of 9, 18, 36, and 72 cm produced maximal temperature rises of 0.68, 0.80, 1.70, and 1.07°C at 1.5 T, respectively. The temperature changes at 3 T for these fragment lengths were 0.66, 0.83, 1.07, and 0.72°C, respectively. The tungsten and PEEK braided microcatheters did not demonstrate heating. CONCLUSIONS: Substantial heating of nitinol braided microcatheters occurred and was a function of SAR level and geometric considerations. SAR and time limitations on MR scanning are proposed for patients with this microcatheter entrapped in their vasculature. In contrast, tungsten and PEEK braided microcatheters showed potential safe use in MRI.
Assuntos
Ligas/efeitos da radiação , Embolização Terapêutica/efeitos adversos , Temperatura Alta/efeitos adversos , Cetonas/efeitos da radiação , Imageamento por Ressonância Magnética/efeitos adversos , Polietilenoglicóis/efeitos da radiação , Tungstênio/efeitos da radiação , Dispositivos de Acesso Vascular/efeitos adversos , Benzofenonas , Radiação Eletromagnética , Humanos , PolímerosRESUMO
When exposed to corrosive anodic electrochemical environments, Pt alloy nanoparticles (NPs) undergo selective dissolution of the less noble component, resulting in catalytically active bimetallic Pt-rich core-shell structures. Structural evolution of PtNi6 and PtNi3 NP catalysts during their electrochemical activation and catalysis was studied by in situ anomalous small-angle X-ray scattering to obtain insight in element-specific particle size evolution and time-resolved insight in the intraparticle structure evolution. Ex situ high-energy X-ray diffraction coupled with pair distribution function analysis was employed to obtain detailed information on the atomic-scale ordering, particle phases, structural coherence lengths, and particle segregation. Our studies reveal a spontaneous electrochemically induced formation of PtNi particles of ordered Au3Cu-type alloy structures from disordered alloy phases (solid solutions) concomitant with surface Ni dissolution, which is coupled to spontaneous residual Ni metal segregation during the activation of PtNi6. Pt-enriched core-shell structures were not formed using the studied Ni-rich nanoparticle precursors. In contrast, disordered PtNi3 alloy nanoparticles lose Ni more rapidly, forming Pt-enriched core-shell structures with superior catalytic activity. Our X-ray scattering results are confirmed by STEM/EELS results on similar nanoparticles.
Assuntos
Níquel/química , Níquel/efeitos da radiação , Platina/química , Platina/efeitos da radiação , Ligas/química , Ligas/efeitos da radiação , Campos Eletromagnéticos , Substâncias Macromoleculares/química , Substâncias Macromoleculares/efeitos da radiação , Teste de Materiais , Conformação Molecular/efeitos da radiação , Tamanho da Partícula , Propriedades de Superfície/efeitos da radiaçãoRESUMO
As a new type of intelligent material, magnetically shape memory alloy (MSMA) has a good performance in its applications in the actuator manufacturing. Compared with traditional actuators, MSMA actuator has the advantages as fast response and large deformation; however, the hysteresis nonlinearity of the MSMA actuator restricts its further improving of control precision. In this paper, an improved Krasnosel'skii-Pokrovskii (KP) model is used to establish the hysteresis model of MSMA actuator. To identify the weighting parameters of the KP operators, an improved gradient correction algorithm and a variable step-size recursive least square estimation algorithm are proposed in this paper. In order to demonstrate the validity of the proposed modeling approach, simulation experiments are performed, simulations with improved gradient correction algorithm and variable step-size recursive least square estimation algorithm are studied, respectively. Simulation results of both identification algorithms demonstrate that the proposed modeling approach in this paper can establish an effective and accurate hysteresis model for MSMA actuator, and it provides a foundation for improving the control precision of MSMA actuator.