Fully automatic AI segmentation of oral surgery-related tissues based on cone beam computed tomography images.

Accurate segmentation of oral surgery-related tissues from cone beam computed tomography (CBCT) images can significantly accelerate treatment planning and improve surgical accuracy. In this paper, we propose a fully automated tissue segmentation system for dental implant surgery. Specifically, we propose an image preprocessing method based on data distribution histograms, which can adaptively process CBCT images with different parameters. Based on this, we use the bone segmentation network to obtain the segmentation results of alveolar bone, teeth, and maxillary sinus. We use the tooth and mandibular regions as the ROI regions of tooth segmentation and mandibular nerve tube segmentation to achieve the corresponding tasks. The tooth segmentation results can obtain the order information of the dentition. The corresponding experimental results show that our method can achieve higher segmentation accuracy and efficiency compared to existing methods. Its average Dice scores on the tooth, alveolar bone, maxillary sinus, and mandibular canal segmentation tasks were 96.5%, 95.4%, 93.6%, and 94.8%, respectively. These results demonstrate that it can accelerate the development of digital dentistry.

Risk factors associated with the severity of pericoronitis of mandibular third molar.

PURPOSE: The factors related to pericoronitis severity are unclear, and this study aimed to address this knowledge gap. MATERIALS AND METHODS: In total, 113 patients with pericoronitis were included, and their demographic, clinical, and radiographic characteristics were recorded. The Patient-Clinician Pericoronitis Classification was used to score and categorize the severity of pericoronitis. Statistical analysis was conducted to examine the participants' characteristics, validity of the Patient-Clinician Pericoronitis Classification, and risk factors associated with the severity of pericoronitis. RESULTS: The demographic, clinical, and radiographic characteristics of males and females were similar, except for Winter's classification, pain, and intraoral swelling. The constructive validity of the Patient-Clinician Pericoronitis Classification was confirmed with three latent factors, including infection level, patient discomfort, and social interference. Ordinal logistic multivariate regression analysis revealed that upper respiratory tract infection was the sole risk factor associated with pericoronitis severity in males (odds ratio = 4.838). In females, pericoronitis on the right side (odds ratio = 2.486), distal radiolucency (odds ratio = 5.203), and menstruation (odds ratio = 3.416) were significant risk factors. CONCLUSION: This study demonstrated the constructive validity of the Patient-Clinician Pericoronitis Classification. Among females, pericoronitis in mandibular third molars on the right side with radiolucency in menstruating individuals was more severe. In males, upper respiratory tract infection was the sole risk factor associated with pericoronitis severity. CLINICAL RELEVANCE: Individuals with risk factors should be aware of severe pericoronitis in the coming future.

Artificial intelligence in age and sex determination using maxillofacial radiographs: A systematic review.

In the past few years, there has been an enormous increase in the application of artificial intelligence and its adoption in multiple fields, including healthcare. Forensic medicine and forensic odontology have tremendous scope for development using AI. In cases of severe burns, complete loss of tissue, complete or partial loss of bony structure, decayed bodies, mass disaster victim identification, etc., there is a need for prompt identification of the bony remains. The mandible, is the strongest bone of the facial region, is highly resistant to undue mechanical, chemical or physical impacts and has been widely used in many studies to determine age and sexual dimorphism. Radiographic estimation of the jaw bone for age and sex is more workable since it is simple and can be applied equally to both dead and living cases to aid in the identification process. Hence, this systematic review is focused on various AI tools for age and sex determination in maxillofacial radiographs. The data was obtained through searching for the articles across various search engines, published from January 2013 to March 2023. QUADAS 2 was used for qualitative synthesis, followed by a Cochrane diagnostic test accuracy review for the risk of bias analysis of the included studies. The results of the studies are highly optimistic. The accuracy and precision obtained are comparable to those of a human examiner. These models, when designed with the right kind of data, can be of tremendous use in medico legal scenarios and disaster victim identification.

Are computed tomography images of the mandible useful in age and sex determination? A forensic science meta-analysis.

OBJECTIVES: This meta-analysis addresses the use of mandibular computed tomography (CT) scans for age and/or sex determination in forensic science. METHODS: Six databases were searched until June 2023, using the keyword "mandible" combined with keywords related to "multislice computed tomography" (MCT) or "cone-beam computed tomography" (CBCT) and keywords related to "skeletal age determination" or "sex determination analysis." MAIN RESULTS: Among the 23 studies included, 11 used MCT and 12 used CBCT to perform forensic assessments. Age determination was the aim of a single study, sex and agedeterminations were the objective of five studies, and the other studies investigated the determination of sex only. Metaanalysis could be performed only for sex determination. CONCLUSIONS: Mandible measurements are useful in sex determination, as the bicondylar and bigonial breadth are larger in males than in females. For the mandible angle, the meta-analysis results confirm sex dimorphism in CBCT scans but not in MCT scans. For age estimation, further studies are needed to prove that the mandible hole is a reliable parameter for age estimation. PROSPERO registration number: CRD42021260967.

A systematic review and meta-analysis of the prevalence and global distribution of middle mesial canals in mandibular molars identified by CBCT.

OBJECTIVES: This systematic review and meta-analysis aimed to evaluate the prevalence of middle mesial canal (MMC) in permanent mandibular molars of different populations and regions based on cone-beam computed tomography (CBCT) studies. MATERIALS AND METHODS: PubMed, Scopus, Embase, Web of Science, and Open-Grey were searched up to October 2023 according to specific keywords. A hand search was conducted on the references of the included studies and articles from three peer-reviewed journals in endodontics. The main variable of interest was the prevalence of MMC. Additional data such as the total number of included cases, age and country of the population, CBCT device information, voxel size, and field of view details were also extracted. Extracted data were analyzed qualitatively with the JBI quality assessment checklist and quantitatively with STATA software. RESULTS: Of 32,793 studied teeth, the cumulative prevalence of MMC in both mandibular 1st and 2nd molars was 3.11% (95% CI: 2.00-4.44%). The subgroup analysis reveals a prevalence of 4.15% (95% CI: 2.69-5.89%) for mandibular 1st molars and 1.2% (95% CI: 0.2-2.83%) for mandibular 2nd molars. The highest prevalence of MMC in 1st molar was attributed to South Asia (11.24%) and Africa (6.61%). CONCLUSIONS: The prevalence of MMC varies among regions. Clinicians should be aware of the potential prevalence of MMC, particularly in mandibular first molars, as a missed MMC could result in endodontic failure. CLINICAL RELEVANCE: The presence of MMCs varies in different geographic regions (0% to 29.7%). Clinicians should always look for MMC when doing an endodontic treatment on mandibular molars, as the presence of this canal is not uncommon. We suggest searching for this canal as if searching for the second mesiobuccal canal of maxillary 1st molars.

Solitary primary intraosseous xanthoma of the mandible in a 15-year-old boy: a case report.

BACKGROUND: A xanthoma is a rare bone condition consisting of a predominant collection of lipid-rich, foamy histiocytes. The central xanthoma of the jaws is a unique benign tumor. CASE REPORT: A 15-year-old Caucasian male has been presented to our department. He had radiological changes in the area of the left mandibular angle, with an area of diffuse osteolysis of 3.0 cm by 2.0 cm. Computed tomography reveals an area of diffuse osteolysis that starts from the distal root of the lower second molar and reaches the ascending process. A bone biopsy was performed, which revealed a benign proliferative process composed of histiocytic cells involving and infiltrating trabecular bone in a background of loose fibrous connective tissue devoid of any other significant inflammatory infiltrate. The size of the formation was 2.9 cm by 2.0 cm. Immunohistochemical staining for CD68 was strongly positive and negative for S-100 and CD1a. From routine blood tests, cholesterol, triglycerides, and blood sugar are within normal values, which excludes systemic metabolic disease. Subsequent to the surgical intervention, the patient underwent postoperative assessments at intervals of 14, 30, 60 days, and a year later, revealing the absence of any discernible complications during the aforementioned observation periods. CONCLUSION: The diagnosis of primary xanthoma of the mandible is rare and can often be confused with other histiocytic lesions. A differential diagnosis should be made with nonossifying fibroma and Langerhans cell histiocytosis, as in our case. In these cases, immunohistochemistry with CD 68, S-100, and CD1a, as well as blood parameters, are crucial for the diagnosis.

Comparative efficacy of digital panoramic radiograph and cone beam computed tomography in locating mandibular foramen.

OBJECTIVE: The aim of this study was to compare the accuracy of panoramic radiographs (PAN) with cone-beam computed tomography (CBCT) in locating the position of the mandibular foramen (MF). PATIENTS AND METHODS: A total of 100 patients who underwent CBCT and panoramic imaging were included in the study. The location of the MF was evaluated anterior-posteriorly and superior-inferiorly on both CBCT and panoramic radiographs. Measurements were taken by two examiners, reviewed by a radiologist, and intra-examiner variability was assessed. A comparison of statistical analysis was performed using the Mann-Whitney U test, independent and paired t-test. A p-value ≤0.05 was deemed significant. RESULTS: The mean age of the patients was 35.03 years, with 51% females and 49% males. CBCT and panoramic radiographs showed comparable accuracy in locating the left (p=0.937) and right (p=0.371) MF anterior-posteriorly. In the superior-inferior dimension, the accuracy of CBCT and panoramic radiographs were comparable in locating the right (p=0.292) and left (p=0.640) MF. The gender-based accuracy of PAN and CBCT radiographs in locating the right (p=0.353) and left (p=0.985) MF was comparable. CONCLUSIONS: The study concludes that panoramic radiographs showed comparable accuracy in effectively locating MF in comparison to CBCT. The influence of gender and anatomic location (right and left sides of MF) on MF identification with panoramic radiographs was insignificant. Digital panoramic radiographs are an effective tool in accurately identifying MF location in clinical practice.

The mylohyoid line is highly variable but does not affect the microarchitecture of the edentulous alveolar bone - an anatomical micro-CT study.

OBJECTIVES: To evaluate in the absence of teeth the variability of the mylohyoid line (ML), the microarchitecture of the adjacent bone, and whether the variable prominence/width of the ML is associated with the quality of the adjacent bone. METHODS: µCT scans of 28 human mandibles from anatomical specimens were analyzed. The following parameters were assessed in four edentulous areas (first and second premolar (PM), first, second, and third molar (M1/2/3)): ML width, cortical thickness (CtTh), average cortical- (Avg.Ct.BV/TV), and trabecular bone volume fraction (Avg.Tb.BV/TV). RESULTS: The ML width increased from the PM towards the M2 region, which also showed the highest variance (range: 0.4-10.2 mm). The CtTh showed a decrease in the M3 region, while Avg.Ct.BV/TV and Avg.Tb.BV/TV hardly differed among the regions. In the multivariable model on the effect of the various parameters on the ML width, only gender and tooth region were significant. Specifically, male specimens were associated with a wider ML width compared to female specimens and the M2 region was associated with a wider ML width compared to the other tooth regions. CONCLUSION: The ML width was not associated with the cortical and trabecular bone quality in the adjacent bone, while gender and tooth region had a significant effect. Specifically, the ML width was lower in female, but peaked in the M2 region with a median width of 3-4 mm. CLINICAL RELEVANCE: From a clinical point of view, it was confirmed that the ML is in general a highly variable structure, especially in the M2 region, but the ML width does not allow any conclusions on the bone quality. Altogether, this underlines the need for an individual and accurate diagnostic prior to any surgical intervention.

A Preclinical Trial Protocol Using an Ovine Model to Assess Scaffold Implant Biomaterials for Repair of Critical-Sized Mandibular Defects.

The present work describes a preclinical trial (in silico, in vivo and in vitro) protocol to assess the biomechanical performance and osteogenic capability of 3D-printed polymeric scaffolds implants used to repair partial defects in a sheep mandible. The protocol spans multiple steps of the medical device development pipeline, including initial concept design of the scaffold implant, digital twin in silico finite element modeling, manufacturing of the device prototype, in vivo device implantation, and in vitro laboratory mechanical testing. First, a patient-specific one-body scaffold implant used for reconstructing a critical-sized defect along the lower border of the sheep mandible ramus was designed using on computed-tomographic (CT) imagery and computer-aided design software. Next, the biomechanical performance of the implant was predicted numerically by simulating physiological load conditions in a digital twin in silico finite element model of the sheep mandible. This allowed for possible redesigning of the implant prior to commencing in vivo experimentation. Then, two types of polymeric biomaterials were used to manufacture the mandibular scaffold implants: poly ether ether ketone (PEEK) and poly ether ketone (PEK) printed with fused deposition modeling (FDM) and selective laser sintering (SLS), respectively. Then, after being implanted for 13 weeks in vivo, the implant and surrounding bone tissue was harvested and microCT scanned to visualize and quantify neo-tissue formation in the porous space of the scaffold. Finally, the implant and local bone tissue was assessed by in vitro laboratory mechanical testing to quantify the osteointegration. The protocol consists of six component procedures: (i) scaffold design and finite element analysis to predict its biomechanical response, (ii) scaffold fabrication with FDM and SLS 3D printing, (iii) surface treatment of the scaffold with plasma immersion ion implantation (PIII) techniques, (iv) ovine mandibular implantation, (v) postoperative sheep recovery, euthanasia, and harvesting of the scaffold and surrounding host bone, microCT scanning, and (vi) in vitro laboratory mechanical tests of the harvested scaffolds. The results of microCT imagery and 3-point mechanical bend testing demonstrate that PIII-SLS-PEK is a promising biomaterial for the manufacturing of scaffold implants to enhance the bone-scaffold contact and bone ingrowth in porous scaffold implants. MicroCT images of the harvested implant and surrounding bone tissue showed encouraging new bone growth at the scaffold-bone interface and inside the porous network of the lattice structure of the SLS-PEK scaffolds.

Effect of different cone beam computed tomography settings on artifact production in titanium and zirconia dental implants: An in vitro study.

BACKGROUND: The use of dental implants in the treatment of edentulous patients is increasing. Zirconia implants are an alternative to titanium implants, offering advantages in terms of aesthetics and biological compatibility. However, the number of artifacts observed on radiographic images with zirconia implants compared to titanium implants is yet to be determined. OBJECTIVES: The purpose of this study was to evaluate the impact of different cone-beam computed tomography (CBCT) parameters on the production of artifacts in zirconia and titanium implants. MATERIAL AND METHODS: A dry human mandible was coated with wax to simulate human soft tissues and examined. Subsequently, titanium and zirconia implants were placed at the same points in the posterior region of the mandible. The production of artifacts on CBCT scans was evaluated using 2 parameters. The first parameter, the standard deviation within the region of interest (SDROI), is based on a comparison of the gray levels at implant and control areas. The second parameter was the contrast-to-noise ratio (CNR), which was evaluated for different protocols created by various combinations of the field of view (FOV) area, milliampere [mA] intensity and metal artifact reduction (MAR) programs. RESULTS: The study found that zirconia implants produced more artifacts than titanium implants. However, the production of artifacts in zirconia implants could be significantly reduced by increasing the mA values, performing CBCT scans with smaller FOV areas, and enabling MAR programs. CONCLUSIONS: The production of artifacts is a disadvantage of zirconia implants, but this drawback can be mitigated by selecting appropriate protocols for the CBCT device.

Basal and dentoalveolar transverse parameters in different sagittal and vertical malocclusions in adults: a comparative study.

OBJECTIVE: This study sought to three-dimensionally (3D) evaluate the maxillomandibular basal bone and dentoalveolar widths using cone-beam computed tomography (CBCT) scans in adult Chinese populations with different vertical and sagittal facial skeletal patterns whilst no apparent posterior dental crossbite. MATERIALS AND METHODS: The retrospective cross-sectional comparative study enrolled CBCT images of 259 adult patients (125 males and 134 females). The subjects were divided into the hyperdivergent(n = 82), hypodivergent(n = 88), and normodivergent(n = 89) groups based on the Jarabak ratio (S-GO/N-Me), which were further divided into three subgroups of skeletal Class I, II and III, based on both the ANB angle and AF-BF parameters. ANOVA was used to analyze the extracted data of the studied groups. The intra- and inter-observer reliability was analyzed using the intra-class correlation coefficient (ICC). RESULTS: In all three vertical facial skeletal patterns, the skeletal Class II had significantly smaller mandibular basal bone width compared to skeletal Class I and Class III, both at the first molar and first premolar levels. The skeletal Class III seemed to have smaller maxillary basal bone width compared to skeletal Class I and Class II malocclusions; however, a significant difference was found only in the normodivergent pattern. As for the dentoalveolar compensation, it was most notable that in the hypodivergent growth pattern, the skeletal Class II had significantly smaller maxillary dentoalveolar width compared to the Class I and Class III groups, both at the first molar and first premolar levels. CONCLUSIONS: Based on the sample in the present study, skeletal Class II has the narrowest mandibular basal bone regardless of the vertical facial skeletal pattern. CLINICAL RELEVANCE: For Chinese adults with no apparent transverse discrepancy, the maxillomandibular basal bone and dentoalveolar widths are revealed in specific categories based on different vertical and sagittal facial skeletal patterns. In diagnosis and treatment planning, particular attention should be paid to skeletal Class II for possibly existing mandibular narrowing.

Assessing current clinical eruption stage of mandibular third molars by dental panoramic radiography.

OBJECTIVE: We examined whether dental panoramic radiography (PAN) can be used to identify the clinical stage of eruption of mandibular third molars at the time of radiological examination. MATERIALS AND METHODS: Cross-sectional data included records from clinical oral examination and PANs of university students. In the retrospective analysis of 345 mandibular third molars in 189 participants (20% men, 80% women; mean age 20.7 years; standard deviation [SD] ± 0.6), clinical stages of eruption were compared with their radiographic depth in bone, inclination, and root development. Statistics included χ2, Mann-Whitney U tests, and logistic regression. RESULTS: Significant (p < 0.001) predictor variables for assessing the clinical stage of eruption were radiographic depth in bone and inclination. All teeth radiologically at a depth of the cementoenamel (CE) junction of the neighbouring second molar or deeper were clinically unerupted. Above the CE junction, 80% of vertical and 97% of distoangular teeth were connected to the oral cavity, and 82% of mesioangular and 69% of horizontal teeth were clinically unerupted. CONCLUSION: All teeth below or at the CE junction are clinically unerupted. Above the CE junction, stage of eruption should be assessed together with the inclination, but horizontally inclined teeth are recommended to be verified clinically.

Prevalence and patterns of third molar impaction among Ethiopians in Addis Ababa: a retrospective pilot study.

Tooth impaction is a condition in which a tooth does not reach its normal position and is often observed in the third mandibular molar due to inadequate space. This study aimed to investigate the prevalence and configuration of the impacted third molars with an emphasis on angular orientations in a sample of the Ethiopian population. This cross-sectional study included a retrospective analysis of 291 patient records and orthopantomography data from the archives of a private dental clinic in Addis Ababa, during the study period from December 2020 to November 2022. Demographic details and data on the position and level of the impacted third molars were evaluated using the Winter classification. Data were analyzed for frequency distribution. The prevalence of impacted third molars was 22% (n = 64), with a greater incidence on the right side (60.9%) and a higher frequency in the mandible (67.2%). Vertical angulation (32.8%), followed by mesioangular angulation (31.2%), was the most common impaction pattern. The results highlight the need for improved treatment protocols for third molar impaction, emphasizing the prevalence in the mandible and the importance of addressing vertical impaction. Regular dental check-ups are essential for assessing third molar impaction and planning appropriate management. These data can inform policymaking and treatment considerations for impacted third molars in the Ethiopian population.

Skeletal, dentoalveolar and soft tissue changes after stabilization splint treatment for patients with temporomandibular joint disorders.

BACKGROUND: Temporomandibular disorder (TMD) is a grouping of heterogeneous disorders with multifactorial origins. Stabilization splints (SS) have demonstrated an acceptable treatment effect in TMD. The possible changes at the skeletal, dental, and soft tissue levels need to be addressed to evaluate the benefit/risk ratio of this therapeutic procedure. Accordingly, this study aimed to three­dimensionally evaluate skeletal, dentoalveolar and soft tissue changes after SS treatment for patients with TMD. METHODS: This retrospective study included 74 adult patients with myofascial and/or intra-articular disorders (25 males and 49 females), with an average age of 22.88 ± 4.8 years, who underwent SS treatment. Pre- and post-treatment Cone beam computed tomography were analysed using Invivo 6.0.3 software. The primary outcome was the vertical skeletal and dentoalveolar changes, while the secondary outcomes were the anteroposterior skeletal, dentoalveolar and soft tissue changes. Paired t-test and Wilcoxon rank sum test were used for statistical analyses. RESULTS: For the primary outcome; skeletally, there was a significant increase in mandibular plane inclination (difference: 0.82°±1.37), decrease facial height ratio (difference: 0.45%±1.07) and at the dentoalveolar level, the inclination of the functional (FOP-SN, FOP-FH) and bisecting (BOP-SN, BOP-FH) occlusal planes exhibited a significant increase too (difference: 0.38 ± 1.43°, 0.49 ± 1.62°, 0.44 ± 1.29° and 0.41 ± 1.17°, respectively) and also a decrease in the overbite (difference: -0.54 ± 0.83). For the secondary outcomes; there was a significant decrease in mandibular position (SNB) (difference: 1.60 ± 1.36°) and increase in the overjet (difference: 0.93 ± 1.04, p < 0.001) and a significant lower lip retrusion (difference: 0.33 ± 1.01 mm p < 0.01), was observed too. CONCLUSIONS: SS therapy resulted in significant vertical skeletal and dentoalveolar changes that were manifested mainly by facial height ratio, mandibular and occlusal plane changes, and to a lesser extent, significant anteroposterior skeletal, dentoalveolar, and soft tissue changes in the form of mandibular position, increased overjet and a more retrusive lower lip. These changes should be considered during patients' selection prior to initiating SS therapy.

Comparison of condylar position after free fibular flap mandibular reconstruction using computer-assisted and traditional techniques.

OBJECTIVES: To compare the changes in condylar position after mandibular reconstruction with free fibular flap(FFF) and the differences between computer-assisted techniques and traditional methods on CT images. METHODS: Thirty-four patients who underwent mandibular reconstruction with free fibular flap were selected according to the inclusion and exclusion criteria. In the 3D group, virtual surgical planning (VSP) with osteotomy cutting plate and placement guiding plate were used, while the traditional group underwent freehand reconstruction. The CT data of 68 temporomandibular joints (TMJs) were recorded before and immediately after surgery. The condylar position was evaluated by measuring the anterior space (AS), posterior space (PS) and superior space (SS), and the ln (PS/AS) was calculated according to the method proposed by Pullinger and Hollender. RESULTS: In the patients included in the 3D group, the condyle on the ipsilateral side moved slightly backward; however, in the patients in the traditional group, the ipsilateral side moved considerably anteroinferior. No obvious changes on the contralateral side were noted. In the 3D group, 33% of ipsilateral condyles were in the posterior position postoperatively when compared with the preoperative position (13%). In the traditional group, the number of ipsilateral condyles in the anterior position increased from 4 to 10, accounting for 53% postoperatively. Contrary to the traditional group, the 3D group presented less condylar displacement on the ipsilateral side postoperatively. CONCLUSIONS: This study showed a decreased percentage of change in condylar position postoperatively when VSP was used. Virtual surgical planning improved the accuracy of FFF mandibular reconstruction and made the condylar position more stable.

Radiological, histological and clinical side effects of incisor trimming in rabbits.

INTRODUCTION: Incisor malocclusion in rabbits (Oryctolagus cuniculus) is a common clinical problem seen in general practice. Given that the growth rate is about 2 mm per week, a lack of wear quickly leads to feeding difficulties and soft tissue injuries. Therefore, pathologically elongated incisors must be shortened every three to six weeks. The goal of this study was to assess the potential adverse effects on dental and periodontal tissues associated with the three most commonly used trimming methods: nail cutter, diamond-coated cutting disc and diamond burr. The left mandibular incisor of 28 healthy New Zealand rabbits was subjected to four trimmings with one of the three cutting methods. After the fattening period, the mandibles were collected and both mandibular incisors were investigated on dental radiographs, micro-computed tomography scans and histological sections. Dental and periodontal tissue changes were evaluated. This study allowed a more accurate statement of the potential short-term adverse effects of the three trimming methods. At the clinical level, the nail cutter caused the formation of an irregular occlusal surface with sharp edges. Both engine-drive methods allowed the attainment of a smooth surface but the disc was less accurate. Histological evaluation revealed that the primary modifications, including coronal fractures, periodontal ligament widening and inflammation, reparative osteodentine, paracementosis and biofilm accumulation, were found in the nail cutter group.

INTRODUCTION: La malocclusion des incisives chez le lapin (Oryctolagus cuniculus) est un problème clinique courant en médecine générale. Étant donné que le taux de croissance est d'environ 2 mm par semaine, un manque d'usure entraîne rapidement des difficultés d'alimentation et des lésions des tissus mous. Par conséquent, les incisives pathologiquement trop longues doivent être raccourcies toutes les trois à six semaines. L'objectif de cette étude était d'évaluer les effets négatifs potentiels sur les tissus dentaires et parodontaux associés aux trois méthodes de taille les plus couramment utilisées: le coupeongles, le disque de coupe diamanté et la fraise diamantée. L'incisive mandibulaire gauche de 28 lapins néo-zélandais en bonne santé a été soumise à quatre tailles avec l'une des trois méthodes de coupe. Après la période d'engraissement, les mandibules ont été prélevées et les deux incisives mandibulaires ont été examinées sur des radiographies dentaires, des examens micro-tomodensitométriques et des coupes histologiques. Les modifications des tissus dentaires et parodontaux ont été évaluées. Cette étude a permis de mieux cerner les effets indésirables potentiels à court terme des trois méthodes de coupe. Au niveau clinique, le coupe-ongles a entraîné la formation d'une surface occlusale irrégulière avec des bords tranchants. Les deux autres méthodes de taille permettent d'obtenir une surface lisse, mais le disque est moins précis. L'évaluation histologique a révélé que les modifications primaires, y compris les fractures coronaires, l'élargissement et l'inflammation du ligament parodontal, l'ostéodentine réparatrice, la paracémentose et l'accumulation de biofilm, ont été trouvées dans le groupe coupe-ongles.

Three-Dimensional Modeling and Quantitative Assessment of Mandibular Volume in Ectodermal Dysplasia: A Case Series.

Background and Objectives: Ectodermal dysplasia (ED)-a genetic disorder-is characterized by severe tooth deficiency. We compared the mandibular volume and the sagittal and horizontal mandibular widths between patients with ED (ED group) and individuals without tooth deficiency (control group) using three-dimensional modeling. We hypothesized that the mandibular volume differs in ED cases owing to congenital tooth deficiency. Materials and Methods: We used previously obtained cone-beam computed tomography (CBCT) images of 13 patients with ED. The control group data comprised retrospective CBCT images of patients of similar age and sex with a skeletal relationship of class 1. Further, using the three-dimensional image analysis software, the tooth crowns were separated from the mandible, the mandible was reconstructed and the gonion-to-gonion distance in the mandible was marked, the distance to the menton point was measured, and the distance between the two condyles was measured and compared with the control group. Results: Overall, 46.2% and 53.8% of the participants were men and women, respectively. In the ED group, the mean age of the participants was 15.46 (range, 6-24) years, and the mean number of mandibular teeth was 4.62. Notably, the edentulous mandible volume of the ED group (27.020 mm3) was statistically significantly smaller than that of the control group (49.213 mm3) (p < 0.001). There was no difference between the two groups in terms of the marked points. For data analysis, the Shapiro-Wilk test, independent samples t-test, and Mann-Whitney U test were used. Conclusions: It has been considered that mandible volume does not develop in ED cases because of missing teeth. Modern practices, such as the CBCT technique and three-dimensional software, may be effective in identifying the true morphologic features, especially in patients with genetic syndromes affecting the maxillofacial structure.

CORRELATION BETWEEN TRANSVERSE CEPHALOMETRIC PARAMETERS AND THE SEVERITY OF SKELETAL MALOCCLUSIONS.

Malocclusion prevalence varies globally, ranging from 34.9% to 93.6% for Class I, 4.4% to 44.7% for Class II, and 1.4% to 19.4% for Class III occlusions. This study aims to assess transverse cephalometric measurements related to maxillary and mandibular dimensions, intermolar and intercanine distances, and other relevant factors. The descriptive cross-sectional research included 100 individuals with malocclusion grades 1, 2, and 3. The study involved 100 participants across three age groups (15-21, 22-28, 29-35), with the majority in the 22-28 range. Gender distribution showed a significant imbalance (77% female, 23% male). Cephalometric measurements for three malocclusion types revealed distinct patterns. Notably, inter-molar width exhibited a strong positive correlation with malocclusion severity (Malocclusion 1: r=0.504 to 0.561, Malocclusion 2: r=0.560 to 0.625, Malocclusion 3: r=0.625 to 0.559), while maxillary-mandibular transverse discrepancy had a negative correlation (Malocclusion 1: r=-0.496, Malocclusion 2: r=-0.483, Malocclusion 3: r=-0.483). Age-diverse sample, gender imbalance noted. Cephalometric correlations reveal inter-molar width association with malocclusion severity, emphasizing clinical implications.

Shape variation and sex differences of the adult human mandible evaluated by geometric morphometrics.

In cases of osseous defects, knowledge of the anatomy, and its age and sex-related variations, is essential for reconstruction of normal morphology. Here, we aimed at creating a 3D atlas of the human mandible in an adult sample using dense landmarking and geometric morphometrics. We segmented 50 male and 50 female mandibular surfaces from CBCT images (age range: 18.9-73.7 years). Nine fixed landmarks and 510 sliding semilandmarks were digitized on the mandibular surface, and then slid by minimizing bending energy against the average shape. Principal component analysis extracted the main patterns of shape variation. Sexes were compared with permutation tests and allometry was assessed by regressing on the log of the centroid size. Almost 49 percent of shape variation was described by the first three principal components. Shape variation was related to width, height and length proportions, variation of the angle between ramus and corpus, height of the coronoid process and inclination of the symphysis. Significant sex differences were detected, both in size and shape. Males were larger than females, had a higher ramus, more pronounced gonial angle, larger inter-gonial width, and more distinct antegonial notch. Accuracy of sexing based on the first two principal components in form space was 91 percent. The degree of edentulism was weakly related to mandibular shape. Age effects were not significant. The resulting atlas provides a dense description of mandibular form that can be used clinically as a guide for planning surgical reconstruction.