Oriented Functionalization of Magnetic Beads with in Vivo Biotinylated Nanobodies for Rapid MALDI-TOF MS Ultrasensitive Quantitation of Microcystins in Biological Samples.

Here we present a new analytical method where immunoconcentration of the analyte is coupled to quantitative matrix-assisted laser desorption ionization time of flight mass spectrometry (MALDI-TOF MS) analysis allowing in minutes the identification and highly sensitive quantitation of microcystins (MCs) as model targets. The key element is a site-specific in vivo biotinylated nanobody of broad cross-reactivity with microcystins. The single biotin moiety at the C-terminus and the small size of the nanobody (15 kDa) enable its oriented and tightly packed immobilization on magnetic beads, providing a highly efficient capture of the toxin. The binding capacity of the bioadsorbent is partially loaded with an easily synthesized internal standard for MS quantitation. After capture, the beads are directly dispensed on the MALDI-TOF MS target enabling the identification and sensitive quantitation of the microcystin (MC) congeners. Since salts and contaminants are removed during the concentration step, no cleanup or other sample treatments are needed. The method was validated with a large number of water and serum samples with excellent precision and recovery at quantitation limits of 0.025 µg/L of MC.

Simultaneous Detection of 14 Microcystin Congeners from Tissue Samples Using UPLC- ESI-MS/MS and Two Different Deuterated Synthetic Microcystins as Internal Standards.

Cyanobacterial microcystins (MCs), potent serine/threonine-phosphatase inhibitors, pose an increasing threat to humans. Current detection methods are optimised for water matrices with only a few MC congeners simultaneously detected. However, as MC congeners are known to differ in their toxicity, methods are needed that simultaneously quantify the congeners present, thus allowing for summary hazard and risk assessment. Moreover, detection of MCs should be expanded to complex matrices, e.g., blood and tissue samples, to verify in situ MC concentrations, thus providing for improved exposure assessment and hazard interpretation. To achieve this, we applied two synthetic deuterated MC standards and optimised the tissue extraction protocol for the simultaneous detection of 14 MC congeners in a single ultra performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) run. This procedure was validated using plasma and liver homogenates of mice (male and female) spiked with deuterated MC standards. For proof of concept, tissue and plasma samples from mice i.p. injected with MC-LR and MC-LF were analysed. While MC-LF was detected in all tissue samples of both sexes, detection of MC-LR was restricted to liver samples of male mice, suggesting different toxicokinetics in males, e.g., transport, conjugation or protein binding. Thus, deconjugation/-proteinisation steps should be employed to improve detection of bound MC.

Feasibility study on production of a matrix reference material for cyanobacterial toxins.

The worldwide increase in cyanobacterial contamination of freshwater lakes and rivers is of great concern as many cyanobacteria produce potent hepatotoxins and neurotoxins (cyanotoxins). Such toxins pose a threat to aquatic ecosystems, livestock, and drinking water supplies. In addition, dietary supplements prepared from cyanobacteria can pose a risk to consumers if they contain toxins. Analytical monitoring for toxins in the environment and in consumer products is essential for the protection of public health. Reference materials (RMs) are an essential tool for the development and validation of analytical methods and are necessary for ongoing quality control of monitoring operations. Since the availability of appropriate RMs for cyanotoxins has been very limited, the present study was undertaken to examine the feasibility of producing a cyanobacterial matrix RM containing various cyanotoxins. The first step was large-scale culturing of various cyanobacterial cultures that produce anatoxins, microcystins, and cylindrospermopsins. After harvesting, the biomass was lyophilized, blended, homogenized, milled, and bottled. The moisture content and physical characteristics were assessed in order to evaluate the effectiveness of the production process. Toxin levels were measured by liquid chromatography with tandem mass spectrometry and ultraviolet detection. The reference material was found to be homogeneous for toxin content. Stability studies showed no significant degradation of target toxins over a period of 310 days at temperatures up to +40 °C except for the anatoxin-a, which showed some degradation at +40 °C. These results show that a fit-for-purpose matrix RM for cyanotoxins can be prepared using the processes and techniques applied in this work.

NIES certified reference material for microcystins, hepatotoxic cyclic peptide toxins from cyanobacterial blooms in eutrophic water bodies.

A certified reference material (CRM) for microcystins has been prepared by the National Institute for Environmental Studies (NIES). Microcystins are hepatotoxic cyclic peptides produced by cyanobacteria in eutrophic water bodies. At least seven microcystin variants were found by HPLC analysis of the NIES CRM, of which [Dha(7)]microcystin-RR and -LR were the major microcystins present. Because of the lack of available standards we determined the total microcystin concentration in the CRM by the MMPB method, and elucidated the structures of the main individual microcystin variants following their isolation. Analyses of NMR and MS spectra indicated that the remaining minor variants in the CRM were [D-Asp(3), Dha(7)]microcystin-RR and -LR, and [Dha(7)]microcystin-YR, -ThTyrR, and -HilR. The CRM is valuable not only as a standard material for the quantitation of total microcystins but also for the identification of individual [Dha(7)]microcystin variants.

[Cyanobacterial toxins in bank filtrate. Under which conditions is their elimination reliable?]. / Cyanobakterientoxine bei der Uferfiltration : Unter welchen Umständen ist ihre Elimination sicher?

Cyanobacterial toxins are substances produced by cyanobacteria or blue-green algae. They can occur in surface waters worldwide and have to be reliably removed when using affected surface waters as a drinking water source. Bank filtration has been used for 150 years for drinking water (pre-)treatment. It utilizes natural elimination processes like sorption and degradation in the sub-surface. Retention of cells on the sediment surface is the most prominent process for eliminating these primarily cell-bound toxins. Middle to coarse grained sands eliminated more than 99.9 % of intracellular toxins within the first 10 cm of flow path. Elimination of extracellular microcystin during underground passage is mainly due to biodegradation. Reversible adsorption processes do not reduce the total load but lead to longer contact times for extended biodegradation. Laboratory experiments showed that the sediment structure, i.e. high clay/silt and organic content, is crucial for maximum adsorption. However, redox conditions play an important role for degradation rates: under aerobic conditions half-lives of less than one day occurred frequently, whereas anoxic conditions resulted in lag phases of one day and more, as well as in half lives of more than 25 days. Field experiments showed that temperature is crucial for degradation velocity under natural conditions. Under optimal conditions 10 d residence time are sufficient to reduce microcystin concentrations to values below the WHO guidelines value for drinking water (1 microg/L). Under sub-optimal conditions a residence time of up to 90 days may be necessary.