RESUMO
Backfill mining is an effective way to solve environment pollute, surface subsidence, and groundwater system damage which caused by coal mining. However, the complex underground environment may change the physical and mechanical properties of the backfill body, which poses a risk of strength failure. This paper analyzed the failure of gangue-based cemented backfill body which made up of gangue and fly ash. The results show that physicochemical reactions will generate quartz, kaolinite, and other high-strength substances; hydration reaction between the fine particles will generate hydrocalcium silicate and other C-S-H gels, they wrapped gangues as a whole, which provide a high strength of the cemented backfill body. Several experiments were carried out in order to find the reason for failure in samples under loads. The conclusion drawn as following: (1) When the load is large, the cracks extend from the surface of the samples to the interior, at the same time, the length and width of the cracks increasing obviously and connecting as net. Especially the external load exceeds the peak intensity. (2) The relationship between sample failure and pores is weak, but obvious with crack development, especially the cracks connected as a net. (3) The interface structure formed by gangue is an important source of crack development and, thus, will stimulate the development of cracks.
Assuntos
Minas de Carvão , Minas de Carvão/métodos , CaulimRESUMO
High-intensity mining has become a major trend in future coal mining. However, it will unavoidably worsen the harm done to the natural environment of mining sites by coal mining, which is already prone to doing so. So, how may coal mining intensity (CMI) be decreased? Minimize the harm that coal mining causes to the environment and offer a theoretical basis for protecting the environment in mining sites. In order to achieve this, based on the existing literature on CMI, we first redefine the concept of CMI, analyze its influencing factors, propose an evaluation index system, and introduce the theory of set pair analysis (SPA) to build a quantitative evaluation model of CMI. We then propose an adjustment strategy for the CMI and conduct a verification analysis using the Halagou Coal Mine and Caojiatan Coal Mine as an example. The results show that the Halagou and Caojiatan Coal Mine belong to the higher-intensity mining stage. It is consistent with existing research. Moreover, the development trend of CMI in the Halagou Coal Mine is analyzed in conjunction with the set pair potential theory, and specific measures to reduce CMI are given, from the perspective of coal mining. It provides the basis for the source protection of the ecological environment in the mining area. Theoretically, this study can help both the quantitative assessment of mining intensity and the source protection of the mining ecological environment. Besides, it offers specific guidelines for building environmentally friendly mines.
Assuntos
Minas de Carvão , Minas de Carvão/métodos , Mineração , Meio Ambiente , Carvão Mineral/análise , ChinaRESUMO
The construction of a pumped storage hydropower plant (PSHP) in an abandoned open-pit mine is a potential alternative to green mining and energy storage, which can increase the utilization rate of renewable energy and develop residual resources of abandoned mines. Dynamic surface subsidence affected by combined underground and open-pit mining (CUOPM) seriously affects the construction and operation of the PSHP and is one of the critical scientific issues that needs to be solved immediately. The stability of the PSHP was analyzed and treatment scheme of the goafs was proposed based on on-site measurement, theoretical analysis, and numerical simulation. First, the distribution of goafs in the Haizhou open-pit mining area was investigated and surface subsidence value was obtained using InSAR technology and ground monitoring. Secondly, the surface subsidence mechanism affected by CUOPM is analyzed and indicates the subsidence maximum values and scope of influence are greater than those of single underground mining. A dynamic surface subsidence prediction model for combined mining is established based on the Knothe time function model. Thirdly, based on the CVISC model, the numerical calculation models were established by using FLAC3D, and the characteristics and laws of surface subsidence in different periods of CUOPM were studied. The comparative analysis of the observation results shows that the proposed model and numerical simulation calculation method have excellent applicability and accuracy. Finally, a stability evaluation method of PSHP was established, and the results of the evaluation show that the affected areas are the semi-ground powerhouse (SGPH) and the west side of the lower reservoir. The method of grouting filling was used to treat the goafs, and the results showed that it effectively alleviates the dynamic surface subsidence affected by CUOPM, and provides a safety guarantee for PSHP.
Assuntos
Minas de Carvão , Mineração , Energia Renovável , Minas de Carvão/métodosRESUMO
CO2 blasting has been identified as a potent method for enhancing the permeability of coal seams and improving gas drainage efficiency. This study is focused on elucidating the deformation and fracture mechanisms of coal and rock during CO2 blasting and on identifying the precursor characteristics of these processes. To this end, a CO2 blasting-induced coal rock fracture pressure model and a gas pressure distribution model were developed. The research utilized a self-developed CO2 blasting test platform along with a non-contact full-strain field measurement analysis system. Briquette samples were subjected to CO2 blasting tests under controlled experimental conditions, which included an axial pressure of 1.0 MPa and variable gas pressures of 0.5, 1.0, and 1.5 MPa. This methodology enabled the capture of the principal strain field on the surface of the samples. The Gray Level Co-occurrence Matrix (GLCM) was employed to extract and analyze the grayscale and texture features of the strain cloud maps, facilitating a quantitative assessment of their evolution. The aim was to pinpoint the precursor characteristics associated with coal rock cracking and crack propagation. The results revealed that: (1) During the cracking and subsequent propagation of samples, the strain field's grayscale histogram underwent a transformation from a "broad and low" to a "narrow and high" configuration, with a consistent increase in peak frequency. Specifically, at 3 ms, a primary crack was observed in the sample, evidenced by a grayscale peak frequency of 0.0846. By 9 ms, as the crack propagated, the grayscale peak frequency escalated to 0.1626. (2) The texture feature parameters experienced their initial abrupt change at 3ms. Correlation with the gas pressure distribution model indicated that this was the crack initiation moment in the sample. (3) A secondary abrupt shift in the texture feature parameters occurred at 9ms, in conjunction with experimental phenomena, was identified as the crack propagation phase. Monitoring the grayscale and texture features of the principal strain field on the coal rock surface proved effective in recognizing the precursor characteristics of crack initiation and propagation. This research has the potential to reduce blasting costs in coal mines, optimize blasting effects, and provided theoretical guidance for enhancing gas extraction efficiency from deep and low permeability coal seams.
Assuntos
Dióxido de Carbono , Minas de Carvão , Dióxido de Carbono/análise , Carvão Mineral/análise , Minas de Carvão/métodos , PermeabilidadeRESUMO
Monitoring the temperature to determine the fire source locations is essential for controlling the spontaneous combustion in the goaf. Optical fiber sensors are employed to measure the temperature distribution in the goaf. However, due to changes in the geological conditions and the influence of the falling rocks in the goaf, only sensors on the upper side of the uncompacted goaf, due to inclination and coal pillar, may remain. Unilateral sensors are located on the upper side of the goaf, while fire occurs in the center. To investigate the issue with linear unilateral sensors, a two-dimensional inverse method has been developed to determine the location of fire sources by considering heat transfer after a fire inside the goaf. The equations were theoretically solved using Green's function method to obtain the internal temperature distribution of the physical model of the goaf. Sensitivity analysis identified the most crucial parameters in the process of spontaneous heating at different temperature. The fire source location can be determined using a loop method based on the model calculations. We considered a case to validate the model. Accurately identifying the fire source location in the goaf using the unilateral sensors has an essential theoretical and practical significance for fire prevention and fighting.
Assuntos
Minas de Carvão , Incêndios , Fibras Ópticas , Minas de Carvão/métodos , Combustão Espontânea , Carvão MineralRESUMO
Cropland is the foundation of food security. Coal is the guarantee of energy security. As China's demand for coal and grain continues to increase, so does the overlap area of their production bases. Unrestrained underground mining can cause serious damage to cropland, leading to increasing conflicts between coal mining and food production. Thus, this paper used a partial backfilling mining technology to control surface subsidence and thus protect cropland. The key to successfully implementing the technology is how to design the panel size. However, the design efficiency of the conventional enumeration method is low. Therefore, this paper proposed a design approach based on improved particle swarm optimization. The results indicated that the approach could quickly find the optimal size of the panel compared with the enumeration method and particle swarm optimization. Moreover, if the longwall panel is mined according to the size designed by the approach, the cropland will be protected, and the cost will be reduced. This study can provide technical support for the cooperative development of cropland protection and coal mining in a coal-cropland overlapping area.
Assuntos
Minas de Carvão , Minas de Carvão/métodos , Carvão Mineral , Produtos Agrícolas , ChinaRESUMO
Mountaintop removal coal mining leaves a legacy of disturbed landscapes and abandoned infrastructure with clear impacts on water resources; however, the intensity and persistence of this water pollution remains poorly characterized. Here we examined the downstream impacts of over a century of coal mining in the Crowsnest Pass (Alberta, Canada). Water samples were collected downstream of two historical coal mines: Tent Mountain and Grassy Mountain. Tent Mountain hosts a partially reclaimed surface mine that closed in 1983. Selenium concentrations downstream of Tent Mountain reached 185 µg/L in a lake below the mine spoil pile, and up to 23 µg/L in Crowsnest Creek, which drains the lake and the mine property. Further downstream, a well-dated sediment core from Crowsnest Lake records increases in sediment, selenium, lead, carbon, nitrogen, and polycyclic aromatic compounds that closely tracked the history of mining at Tent Mountain. In contrast, episodic discharge of mine water from abandoned underground adits at Grassy Mountain drive periodic (but short-term) increases in iron, various metals, and suspended sediment. These results underscore the lasting downstream impacts of abandoned and even reclaimed coal mines.
Assuntos
Minas de Carvão , Selênio , Poluentes Químicos da Água , Minas de Carvão/métodos , Ecossistema , Monitoramento Ambiental/métodos , Selênio/análise , Poluentes Químicos da Água/análise , Mineração , Água , Alberta , Carvão MineralRESUMO
The productivity of coal mines is seriously threatened by the combined disasters of gas and coal spontaneous combustion, which have become a common disaster mode. It is unclear how the gas and coal spontaneously combusted in the roof cutting along gob working face. The goal of this study is to identify the distinctive features of combined disasters in gob from two different types of roof cutting along working faces. In these two different types of roof cutting along gob working faces, the paper constructs the permeability model of the gob. The findings demonstrate that the data from the field experiment and the simulation results agree, which validates the simulation's reliability. In contrast to single sided roof cutting along gob working faces, double sided roof cutting along gob working faces clearly has a thinner oxidation zone. Moreover, the oxidation zone of the double side roof cutting along gob working faces is closer to the working face, which is located in the shallow area of the gob 50 m behind the working face. The gas explosion area and the coal spontaneous combustion area are divided by the double side roof cutting along gob working face, which reduces the risk of compound disasters. Important theoretical direction for the prevention and control of gob disasters in the roof cutting along gob working face is provided by the simulation results.
Assuntos
Minas de Carvão , Reprodutibilidade dos Testes , Minas de Carvão/métodos , Simulação por Computador , Combustão Espontânea , Carvão MineralRESUMO
To investigate the distribution characteristics of spontaneous combustion disaster (SCD) zones in the goaf of "110" mining method with U + L ventilation system and formulate corresponding fire prevention measures, enclosed coal oxidation experiments were carried out to measure the oxidation characteristics of Dongrong Coal Mine bituminous coal sample. A coupled 3DEC-CFD (3 dimensional Distinct Element Code) model was established. The 3D transient distribution characteristics of SCD zones in the "110" mining goaf under U+L ventilation condition were analyzed. Nitrogen injection in the tailgate was proposed for coal spontaneous combustion prevention. The results show that air leakage changed the distribution of oxygen and temperature fields in the "110" goaf, causing the region 20~60 m parallel to the retained roadway to remain in the oxidation zone for spontaneous combustion. As the working face advanced, the area change curve of SCD zones in the "110" goaf exhibited a "double inflection point" pattern. Eliminating the "retained roadway oxidation zone" can effectively reduce the spontaneous combustion risks in the "110" goaf and ensure mining safety. This study enriches the mechanisms of coal spontaneous combustion.
Assuntos
Minas de Carvão , Combustão Espontânea , Temperatura , Minas de Carvão/métodos , Carvão Mineral , OxirreduçãoRESUMO
Coal spontaneous combustion in the gob poses a significant threat to coal mining operations. Designing optimal process parameters for nitrogen injection to prevent and control fires efficiently is crucial. To achieve this, a multi-field coupling equation was established, considering the adsorption of coal to gas. The model's accuracy was verified on-site, and the effects of nitrogen injection at different locations and flow rates were simulated. The optimal injection parameters were determined by analyzing temperature and inerting time. The results showed that the coal spontaneous combustion hazardous zone in the gob tested on-site was consistent with the simulation from the perspective of physisorption. Nitrogen injection had three stages: gas expansion, rapid oxygen dilution, and complete inerting. The nitrogen injection effect presented a nonlinear change in injection location and flow rate. The optimal nitrogen injection location for the Tingnan Coal Mine in Shaanxi was determined to be 90 m behind the working face on the inlet side, with an optimal flow rate of 800 m3/min. This study focused on gas adsorption and offered valuable insights for creating high-efficiency fire-fighting techniques that involve inserting in the gob.
Assuntos
Minas de Carvão , Incêndios , Combustão Espontânea , Carvão Mineral , Adsorção , Incêndios/prevenção & controle , Minas de Carvão/métodos , NitrogênioRESUMO
Mine dust pollution poses a hindrance to achieving green and climate-smart mining. This paper uses weather forecast data and mine production intensity data as model inputs to develop a novel model for forecasting daily dust concentration values in open pit mines by employing and integrating multiple machine learning techniques. The results show that the forecast model exhibits high accuracy, with a Pearson correlation coefficient exceeding 0.87. The PM2.5 forecast model performs best, followed by the total suspended particle and PM10 models. The inclusion of production intensity significantly enhances model performance. Total column water vapor exerts the most significant impact on the model's predictive performance, while the impacts of rock production and coal production are also notable. The proposed daily forecast model leverages production intensity data to predict future dust concentrations accurately. This tool offers valuable insights for optimizing mine design parameters, enabling informed decisions based on real-time forecasts. It effectively prevents severe pollution in the mining area while maximizing the use of natural meteorological conditions for effective dust removal and diffusion.
Assuntos
Minas de Carvão , Poeira , Poeira/análise , Monitoramento Ambiental/métodos , Mineração , Poluição Ambiental , Tempo (Meteorologia) , Carvão Mineral , Minas de Carvão/métodosRESUMO
The backfilling mining method that fills gobs with coal gangue can prevent water inrush hazards, protect groundwater resources, and protect the ecological environment of the mining area. However, initial conditions including the particle size distribution of gangue and the stress environment may affect the seepage characteristics of gangue backfill and inrush prevention ability. Taking the particle size and stress as main controlling factors, the seepage tests were designed for gangue to evaluate influences of the particle size and stress on the void ratio, permeability, and non-Darcian flow factor of gangue. In the meantime, the four stages in dynamic changes of seepage channels were studied and the impervious envelope lines of gangue backfill materials were provided. The results show that the larger the particle sizes, the stronger the crushing resistance of particles; under high stress (> 6.67 MPa), seepage channels in small gangue particles (< 5 mm) change in a more complex manner, and the non-Darcian flow phenomena become more significant. The particle size and stress exert significant influences on the seepage characteristics. Therefore, when reducing water inrush hazards by gangue backfilling in gobs, the particle size distribution should be optimized by combining the stress and water pressure conditions. Seepage channels in gangue backfill materials vary with changes in the particle size and stress. Their variation can be divided into four stages: shrinkage of seepage channels, reconstruction of seepage channels, dynamic equilibrium between slight expansion and shrinkage, and persistence of the impervious effect. After the first and second stages have been fully developed, the preliminary impervious conditions are met; after full development of the fourth stage, the gangue backfill materials reach an impervious state.
Assuntos
Minas de Carvão , Minas de Carvão/métodos , Tamanho da Partícula , Carvão Mineral , Meio Ambiente , ÁguaRESUMO
China's current energy consumption is primarily fueled by coal, increasing coal mining with growing energy demand. Coal and gas outburst accidents are common problems in coal mining, and prediction methods are fundamental for preventing such accidents. The gas emission characteristics of boreholes are a combination of comprehensive coal properties and coal seam gas occurrence status; thus, the accurate prediction of gas emissions from boreholes is crucial for preventing such hazards. This paper presents a method for measuring the gas flow rate in continuous boreholes, which is used to predict outburst danger in front of the working face. The model was compared with field measurement data and found suitable for research. The effects of different initial gas pressures, different borehole radius, and different burial depths on gas emissions from boreholes were studied. The results showed that (1) initial gas pressure is the main influencing factor of gas gushing. The amount of gas emission during drilling and the attenuation of gas pressure are more sensitive to pressure. An increase in gas pressure considerably increases the amount of gas gushing out of drilling holes. (2) The increase in the drilling radius increases the generation of coal cuttings, the area of the drilling hole wall, and the degree of damage to the drilling hole wall. Consequently, the amount of gas gushing out of the drilling hole increases. (3) In situ stress occurs mainly because of the increase in gas pressure with an increase in burial depth and the increase in gas desorption caused by the increase in damage to the borehole wall. This study provides a new outburst prediction method, which involves identifying outburst hazards through the gas gushing out of the borehole. The results are expected to aid the control of underground coal and gas outbursts and ensure the safe production of coal mines.
Assuntos
Minas de Carvão , Metano , Carvão Mineral , Minas de Carvão/métodosRESUMO
The carbon peaking and carbon neutrality goals drive innovation in pollution governance systems, unleashing the potential of social supervisory forces to achieve coordinated governance by multiple stakeholders. In order to improve dust pollution control in opencast coal mines, this study combines prospect theory with evolutionary game theory, analyzing the evolutionary game process of coordinated governance activities of coal mining enterprises, local regulators, and social camps in the management of dust pollution against the backdrop of national supervisions. The research indicates that the perceived value of dust pollution has a significant impact on the strategic choices of the three agents involved in the game. Coal mining enterprises tend to be risk averse, and by reducing the cost of dust pollution control and increasing the additional benefits of pollution control, it can promote pollution control behavior by coal mining enterprises. Local regulators are also risk averse, but not sensitive to risk benefits. Strengthening pollution subsidy incentives and environmental fines can help promote dust pollution control behavior by coal mining enterprises. However, increasing the strength of the rewards strategy is not conducive to local regulators' own regulatory responsibilities, and environmental fines have limited binding effects. The strategic choices of social camps' supervision have a restrictive effect on the strategic choices of coal mining enterprises and local regulators, promoting the evolution of equilibrium results in the direction of maximizing social benefits. When coal mining enterprises actively governance pollution, local regulators strictly regulated, and social camps do not monitor, the system reaches its optimal equilibrium state. The research results clarify the mechanism and specific effects of social supervision of opencast coal mine dust pollution control, guide the participation of the public in dust pollution control, and regulate the behavior strategies of coal mining enterprises and local regulators, providing the scientific basis for management.
Assuntos
Minas de Carvão , Poeira , Poluição Ambiental , Parcerias Público-Privadas , China , Minas de Carvão/legislação & jurisprudência , Minas de Carvão/métodos , Poeira/prevenção & controle , Poluição Ambiental/legislação & jurisprudência , Poluição Ambiental/prevenção & controle , Indústrias Extrativas e de Processamento/organização & administração , Teoria dos Jogos , Regulamentação Governamental , Modelos Organizacionais , Parcerias Público-Privadas/organização & administraçãoRESUMO
Underground coal mining can cause the deformation, failure, and collapse of the overlying rock mass of a coal seam. If the mining design, monitoring, early warning, or emergency disposal are improper, in that case, it can often lead to mining disasters such as roof falls, water inrush, surface collapse, and ground fissures, seriously threatening the safety of mine engineering and the geological environment protection in mining areas. To ensure the intrinsic security of the entire coal mining process, aspace-time continuous sensing system of overburden deformation and failure was developed, which breaks through the limitations of traditional monitoring methods that characterize the evolution process of overlying rock deformation and ground subsidence. This paper summarizes the classification of typical overburden deformation and failure modes. It researches the space-time continuous sensing of rock-soil mass above the coal seam based on Distributed Fiber Optic Sensing (DFOS). A multi-range strain optical fiber sensing neural series from micron to meter was developed to achieve synchronous sensing of overburden separation, internal micro-cracks, and large rock mass deformation. The sensing cable-rock mass coupling test verified the reliability of the optical fiber monitoring data. The sensing neural network of overburden deformation was constructed using integrated optical fiber layout technology on the ground and underground. Different sensing nerves' performance and application effects in overburden deformation and failure monitoring were compared and analyzed with field monitoring examples. A physical model was used to carry out the experimental study on the overburden subsidence prediction during coal mining. The results showed that the optical fiber monitoring data were reliable and could be used to predict overburden subsidence. The reliability of the calculation model for overlying rock subsidence based on space-time continuous optical fiber sensing data was verified in the application of mining subsidence evaluation. A systematic review of the shortcomings of current overburden deformation observation technology during coal mining was conducted, and a space-time continuous sensing system for overburden deformation and failure was proposed. This system integrated sensing, transmission, processing, early warning, decision-making, and emergency response. Based on the fusion of multi-parameter sensing, multi-method transmission, multi-algorithm processing, and multi-threshold early warning, the system realized the real-time acquisition of space-time continuous information for the overburden above coal seams. This system utilizes long-term historical monitoring data from the research area for data mining and modeling, realizing the prediction and evaluation of the evolution process of overburden deformation as well as the potential for mining subsidence. This work provides a theoretical reference for the prevention and control of mining disasters and the environmental carrying capacity evaluation of coal development.
Assuntos
Minas de Carvão , Modelos Teóricos , Minas de Carvão/métodos , Reprodutibilidade dos Testes , Algoritmos , Carvão MineralRESUMO
Coal gangue, as an associated product of coal mining, can cause a large number of piles to undergo slow oxidation and spontaneous combustion, resulting in the production of toxic and harmful gases, leading to casualties, environmental damage, and economic losses. Gel foam has been extensively employed as a fire-retardant material in coal mine fire prevention. The thermal stability and rheological properties of the newly developed gel foam were investigated in this study, as well as its oxygen barrier properties and fire extinguishing effect which were evaluated through programmed temperature rise and field fire extinguishing experiments. The experiment indicated that the temperature endurance of the new gel foam was around twice that of the ordinary gel foam, and this resistance decreased with the increment of foaming times. Moreover, the temperature endurance of the new gel foam with a stabilizer concentration of 0.5% was superior to that of 0.7% and 0.3%. Temperature has a negative effect on the rheological properties of the new gel foam, while the foam stabilizer concentration has a positive effect. The oxygen barrier performance experiment results showed that the CO release rate of coal samples treated with the new gel foam rose relatively slowly with temperature, and the CO concentration of coal samples treated with the new gel foam was only 159 ppm at 100 °C, which was significantly lower than 361.1 ppm after two-phase foam treatment and 715 ppm after water treatment. Through simulating the spontaneous combustion experiment of coal gangue, it was demonstrated that the new gel foam has a much better extinguishing effect than water and traditional two-phase foam. The new gel foam cools gradually and does not re-ignite during the fire extinguishing process, while the other two materials re-ignite after being extinguished.
Assuntos
Minas de Carvão , Incêndios , Combustão Espontânea , Carvão Mineral , Incêndios/prevenção & controle , Minas de Carvão/métodos , OxigênioRESUMO
Solid backfilling in coal mining refers to filling the goaf with solid materials to form a support structure, ensuring safety in the ground and upper mining areas. This mining method maximizes coal production and addresses environmental requirements. However, in traditional backfill mining, challenges exist, such as limited perception variables, independent sensing devices, insufficient sensing data, and data isolation. These issues hinder the real-time monitoring of backfilling operations and limit intelligent process development. This paper proposes a perception network framework specifically designed for key data in solid backfilling operations to address these challenges. Specifically, it analyses critical perception objects in the backfilling process and proposes a perception network and functional framework for the coal mine backfilling Internet of Things (IoT). These frameworks facilitate rapidly concentrating key perception data into a unified data centre. Subsequently, the paper investigates the assurance of data validity in the perception system of the solid backfilling operation within this framework. Specifically, it considers potential data anomalies that may arise from the rapid data concentration in the perception network. To mitigate this issue, a transformer-based anomaly detection model is proposed, which filters out data that does not reflect the true state of perception objects in solid backfilling operations. Finally, experimental design and validation are conducted. The experimental results demonstrate that the proposed anomaly detection model achieves an accuracy of 90%, indicating its effective detection capability. Moreover, the model exhibits good generalization ability, making it suitable for monitoring data validity in scenarios involving increased perception objects in solid backfilling perception systems.
Assuntos
Minas de Carvão , Minas de Carvão/métodos , Carvão Mineral/análiseRESUMO
Coal mining disturbs surface ecosystems in coal mining subsidence areas. Based on the groundwater-surface composite ecosystem analysis, we constructed an ecological disturbance evaluation index system (18 indices) in a coal mining subsidence area using the analytic hierarchy process (AHP). Taking the Nalinhe mining area in Wushen Banner, China, in 2018-2020 as an example, the weight, ecological disturbance grade and correlation of different indicators were determined by implementing fuzzy mathematics, weighting method, and correlation analysis method. The major conclusions of this review were: (i) After two years of mining, ecological disturbance was the highest in the study area (Grade III) and the lowest in the non-mining area (Grade I). (ii) Coal mining not only directly interfered with the environment, but also strengthened the connection of different ecological indicators, forming multiple ecological disturbance chains such as "mining intensity-mining thickness-buried depth/Mining thickness", "coal mining-surface subsidence-soil chemical factors", and "natural environment-soil physical factors". The disturbance chain that controls the ecological response factors in the region remains to be determined. However, the ecological response factors are the most important factor that hinders the restoration of the ecology in a coal mining subsidence area. (iii) The ecological disturbance in the coal mining subsidence area continued increasing over two years due to coal mining. The ecological disturbance by coal mining cannot be completely mitigated by relying on the self-repair capability of the environment. This study is of great significance for ecological restoration and governance of coal mining subsidence areas.
Assuntos
Minas de Carvão , Água Subterrânea , Ecossistema , Minas de Carvão/métodos , Meio Ambiente , Solo , China , Carvão MineralRESUMO
Underground coal fires are a widespread disaster prevailing in major coal-producing countries globally, posing serious threats to the ecological environment and restricting the safe exploitation of coal mines. The accuracy of underground coal fire detection directly affects the effectiveness of fire control engineering. In this study, we searched 426 articles from the Web of Science database within 2002-2022 as the data foundation and visualized the research contents of the underground coal fire field using VOSviewer and CiteSpace. The results reveal that the investigation of "underground coal fire detection techniques" is currently the focal area of research in this field. Additionally, the "underground coal fire multi-information fusion inversion detection methods" are considered to be the future research trend. Moreover, we reviewed the strengths and weaknesses of various single-indicator inversion detection methods, including the temperature method, gas and radon method, natural potential method, magnetic method, electric method, remote sensing, and geological radar method. Furthermore, we conducted an analysis of the advantages of the multi-information fusion inversion detection methods, which possesses high precision and wide applicability for detecting coal fires, while highlighting the challenges in handling diverse data sources. It is our hope that the research results presented in this paper will provide valuable insights and ideas for researchers involved in the detection and practical research of underground coal fires.
Assuntos
Minas de Carvão , Desastres , Incêndios , Radônio , Carvão Mineral/análise , Minas de Carvão/métodos , Radônio/análiseRESUMO
Spray dust reduction is a common dust control process in coal mines. However, the actual efficiency of spray dust reduction in a coal mine is low due to poor coal wettability. We select four surfactants that can greatly improve the surface activity of a dust suppressant solution. The wettability of the surfactant solution on coal dust is investigated in terms of two aspects: surface tension and contact angle. The effects of the type of surface-active dust suppressant and its concentration in the spray solution on the wetting of the coal dust and curing effects were analyzed. Numerical simulations were used to simulate spray atomization and to deduce how different types and concentrations of dust suppressant solutions affect the spray. The technical approach of the spray dust reduction method was further optimized by comprehensive analysis and numerical simulations, which could provide guidance for the application of spray dust reduction in coal mines.