Send it, receive it, quick erase it: A mouse model to decipher chemokine communication.

A method to precisely determine which cells respond to chemokines in vivo is currently lacking. A novel class of dual fluorescence reporter mice could help identify cells that produce and/or sense a given chemokine in vitro and in vivo (Rodrigo et al. 2024. J. Exp. Med.https://doi.org/10.1084/jem.20231814).

STAPLED FASCIAL CLOSURE VS. CONTINUOUS HAND-SEWN SUTURE: EXPERIMENTAL STUDY OF THE ABDOMINAL WALL ON PORCINE MODEL AND HUMAN CADAVER.

BACKGROUND: One of the primary complications associated with large incisions in abdominal surgery is the increased risk of fascial closure rupture and incisional hernia development. The choice of the fascial closure method and closing with minimal tension and trauma is crucial for optimal results, emphasizing the importance of uniform pressure along the suture line to withstand intra-abdominal pressure. AIMS: To evaluate the resistance to pressure and tension of stapled and sutured hand-sewn fascial closure in the abdominal wall. METHODS: Nine abdominal wall flaps from human cadavers and 12 pigs were used for the experimentation. An abdominal defect was induced after the resection of the abdominal wall and the creation of a flap in the cadaveric model and after performing a midline incision in the porcine models. The models were randomized into three groups. Group 1 was treated with a one-layer hand-sewn small bite suture, Group 2 was treated with a two-layer hand-sewn small bite suture, and Group 3 was treated with a two-layer stapled closure. Tension measurements were assessed in cadaveric models, and intra-abdominal pressure was measured in porcine models. RESULTS: In the human cadaveric model, the median threshold for fascial rupture was 300N (300-350) in Group 1, 400N (350-500) in Group 2, and 350N (300-380) in Group 3. Statistical comparisons revealed non-significant differences between Group 1 and Group 2 (p=0.072, p>0.05), Group 1 and Group 3 (p=0.346, p>0.05), and Group 2 and Group 3 (p=0.184, p>0.05). For porcine subjects, Group 1 showed a median pressure of 80 mmHg (85-105), Group 2 had a median of 92.5 mmHg (65-95), and Group 3 had a median of 102.5 mmHg (80-135). Statistical comparisons indicated non-significant differences between Group 1 and Group 2 (p=0.243, p>0.05), Group 1 and Group 3 (p=0.468, p>0.05), and Group 2 and Group 3 (p=0.083, p>0.05). CONCLUSIONS: Stapled and conventional suturing resist similar pressure and tension thresholds.

Reaction-norm animal model analysis of average daily gain heat tolerance in purebred Duroc pigs.

The present study aimed to genetically improve growth performance under high-heat environments by specifically designing a reaction-norm animal model (RNAM) for purebred Duroc pigs in Japan. A total of 54,750 records of average daily gain (ADG) measured for pigs reared at four farms in different prefectures were analyzed. Estimated maximum daily temperatures at the respective farm locations were used to calculate the average cumulative thermal load (TL). The TL values served as an indicator of high-heat environments for pigs. The plausible cumulative period length and threshold temperature for calculating TL were determined to be 8 weeks until just before shipping and 25°C, respectively. Variance components were estimated via RNAM analysis using TL as a linear covariate. The estimated additive genetic variances under both responsive and non-responsive to TL were found to be significant. Moreover, the estimated heritability of ADG ranged from 0.38 to 0.73 for TL values of 0-8. These results suggest that the RNAM developed holds the potential for improving the genetic ability of growth under high-heat environments in pigs.

In vivo study of a novel 3D-printed motion-preservation artificial cervical corpectomy construct: short-term imaging and biocompatibility evaluations in a goat model.

BACKGROUND: Nonfusion technologies, such as motion-preservation devices, have begun a new era of treatment options in spine surgery. Motion-preservation approaches mainly include total disc replacement for anterior cervical discectomy and fusion. However, for multisegment fusion, such as anterior cervical corpectomy and fusion, the options are more limited. Therefore, we designed a novel 3D-printed motion-preservation artificial cervical corpectomy construct (ACCC) for multisegment fusion. The aim of this study was to explore the feasibility of ACCC in a goat model. METHODS: Goats were treated with anterior C3 corpectomy and ACCC implantation and randomly divided into two groups evaluated at 3 or 6 months. Radiography, 3D CT reconstruction and MRI evaluations were performed. Biocompatibility was evaluated using micro-CT and histology. RESULTS: Postoperatively, all goats were in good condition, with free neck movement. Implant positioning was optimal. The relationship between facet joints was stable. The range of motion of the C2-C4 segments during flexion-extension at 3 and 6 months postoperatively was 7.8° and 7.3°, respectively. The implants were wrapped by new bone tissue, which had grown into the porous structure. Cartilage tissue, ossification centres, new blood vessels, and bone mineralization were observed at the porous metal vertebrae-bone interface and in the metal pores. CONCLUSIONS: The ACCC provided stabilization while preserving the motion of the functional spinal unit and promoting bone regeneration and vascularization. In this study, the ACCC was used for anterior cervical corpectomy and fusion (ACCF) in a goat model. We hope that this study will propel further research of motion-preservation devices.

Safe and effective hybrid endoscopic submucosal dissection with ALL IN ONE snare in porcine gastric model (with video).

This study aimed to evaluate the safety and efficiency of hybrid endoscopic submucosal dissection (H-ESD) using a newly developed ALL IN ONE (AIO) snare. This was a matched control study in a porcine model. Five paired simulated stomach lesions 2-2.5 cm in size were removed by H-ESD using an AIO snare or conventional ESD (C-ESD) using an endoscopic knife. The outcomes of the two procedures were compared, including en-bloc resection rates, procedure times, intraprocedural bleeding volumes, muscular injuries, perforations, thicknesses of the submucosal layer in resected specimens, and stomach defects. All simulated lesions were resected en-bloc. Specimens resected by H-ESD and C-ESD were similar in size (7.68 ± 2.92 vs. 8.42 ± 2.42 cm2; P = 0.676). H-ESD required a significantly shorter procedure time (13.39 ± 3.78 vs. 25.99 ± 4.52 min; P = 0.031) and submucosal dissection time (3.99 ± 1.73 vs. 13.1 ± 4.58 min; P = 0.003) versus C-ESD; H-ESD also yielded a faster dissection speed (241.37 ± 156.84 vs. 68.56 ± 28.53 mm2/min; P = 0.042) and caused fewer intraprocedural bleeding events (0.40 ± 0.55 vs. 3.40 ± 1.95 times/per lesion; P = 0.016) than C-ESD. The thicknesses of the submucosal layer of the resected specimen (1190.98 ± 134.07 vs. 1055.90 ± 151.76 µm; P = 0.174) and the residual submucosal layer of the stomach defect (1607.94 ± 1026.74 vs. 985.98 ± 445.58 µm; P = 0.249) were similar with both procedures. The AIO snare is a safe and effective device for H-ESD and improves the treatment outcomes of gastric lesions by shortening the procedure time.

Quantifying Inferior Vena Cava Compliance and Distensibility in an In Vivo Ovine Model Using 3D Angiography.

Synthetic vascular grafts overcome some challenges of allografts, autografts, and xenografts but are often more rigid and less compliant than the native vessel into which they are implanted. Compliance matching with the native vessel is emerging as a key property for graft success. The current gold standard for assessing vessel compliance involves the vessel's excision and ex vivo biaxial mechanical testing. We developed an in vivo method to assess venous compliance and distensibility that better reflects natural physiology and takes into consideration the impact of a pressure change caused by flowing blood and by any morphologic changes present. This method is designed as a survival procedure, facilitating longitudinal studies while potentially reducing the need for animal use. Our method involves injecting a 20 mL/kg saline bolus into the venous vasculature, followed by the acquisition of pre and post bolus 3D angiograms to observe alterations induced by the bolus, concurrently with intravascular pressure measurements in target regions. We are then able to measure the circumference and the cross-sectional area of the vessel pre and post bolus. With these data and the intravascular pressure, we are able to calculate the compliance and distensibility with specific equations. This method was used to compare the inferior vena cava's compliance and distensibility in native unoperated sheep to the conduit of sheep implanted with a long-term expanded polytetrafluorethylene (PTFE) graft. The native vessel was found to be more compliant and distensible than the PTFE graft at all measured locations. We conclude that this method safely provides in vivo measurements of vein compliance and distensibility.

New methods to unveil host-microbe interaction mechanisms along the microbiota-gut-brain-axis.

Links between the gut microbiota and human health have been supported throughout numerous studies, such as the development of neurological disease disorders. This link is referred to as the "microbiota-gut-brain axis" and is the focus of an emerging field of research. Microbial-derived metabolites and gut and neuro-immunological metabolites regulate this axis in health and many diseases. Indeed, assessing these signals, whether induced by microbial metabolites or neuro-immune mediators, could significantly increase our knowledge of the microbiota-gut-brain axis. However, this will require the development of appropriate techniques and potential models. Methods for studying the induced signals originating from the microbiota remain crucial in this field. This review discusses the methods and techniques available for studies of microbiota-gut-brain interactions. We highlight several much-debated elements of these methodologies, including the widely used in vivo and in vitro models, their implications, and perspectives in the field based on a systematic review of PubMed. Applications of various animal models (zebrafish, mouse, canine, rat, rabbit) to microbiota-gut-brain axis research with practical examples of in vitro methods and innovative approaches to studying gut-brain communications are highlighted. In particular, we extensively discuss the potential of "organ-on-a-chip" devices and their applications in this field. Overall, this review sheds light on the most widely used models and methods, guiding researchers in the rational choice of strategies for studies of microbiota-gut-brain interactions.

Mouse kidney transplantation model: Three novel methods. / å°é¼ è‚¾ç§»æ¤æ¨¡åž‹ï¼š3种创新术式（英文）.

OBJECTIVES: The mouse kidney transplantation model presents challenges in terms of surgical difficulty and low success rate, making it difficult to master. This study aims to provide a crucial model for transplantation immunology research by modifying and developing novel techniques for mouse kidney transplantation. METHODS: A total of 57 pairs of mice were used to establish and compare the modified and innovative surgical techniques for mouse kidney transplantation. Three different surgical models were established, including the abdominal suture technique for orthotopic kidney transplantation, the abdominal cuff technique for orthotopic kidney transplantation, and the cervical cuff technique for ectopic kidney transplantation. BALB/c or C57BL/6 male mice, aged 8 to 12 weeks and weighed 20 to 25 g with specified pathogen free-grade were served as the donor mice or the recipient mice. The surgical technique characteristics, key surgical times, complications, and pathological examination in the early postoperative period were summarized and compared. RESULTS: Three different surgical models of mouse kidney transplantation were successfully established. The comparison of warm ischemic time for the 3 groups of mice showed no statistical significance (P=0.510 4). The abdominal suture group had the shortest total operation time of the donor compared with the abdominal cuff group and the cervical cuff group [(18.3±3.6) min vs (26.2±4.7) min and (22.8±2.5) min; both P<0.000 1]. There was a significant difference in cold ischemia time among the 3 groups (all P<0.000 1), with (60.8±4.1) min in the cervical cuff group, (43.3±5.0) min in the abdominal suture group, and (88.8±6.7) min in the abdominal cuff group. Due to different anastomosis methods, the cervical cuff group had the shortest time [(17.6±2.7) min], whereas the abdominal cuff group had the longest time [(38.8±5.4) min]. The total operation time for the recipients showed significant differences (P<0.000 1), with the abdominal suture group having the shortest time [(44.0±6.9) min], followed by the cervical cuff group [(64.1±5.2) min], and the abdominal cuff group [(80.0±6.0) min] being the longest. In the 32 mice of the abdominal suture group, there were 6 with intraoperative bleeding, including 1 arterial intimal injury bleeding and 5 with bleeding after vessel opening. Six mice had ureteral complications, including ureteral bladder anastomotic stenosis, necrosis, and renal pelvis dilation. Two mice had postoperative abdominal infections. In the abdominal cuff group, there was no intraoperative bleeding, but 6 mice showed mild arterial stenosis and 5 showed venous stenosis, 4 arterial injury, 4 arterial thrombosis, and 2 ureteral complications. No postoperative infections occurred in the mice. In the cervical cuff group, no intraoperative bleeding, arterial intimal injury, arterial/venous stenosis, or thrombosis were found in 13 mice. Five mice had ureteral complications, including ureteral necrosis and infection, which were the main complications in the cervical cuff group. The renal function in mice of the 3 groups remained stable 7 days after surgery. Hematoxylin and eosin staining and periodic acid-Schiff staining showed no significant differences in terms of acute rejection among the 3 surgical methods (all P>0.05). CONCLUSIONS: All 3 surgical methods are able to successfully establish mouse kidney transplantation models, with no significant differences observed in the short-term graft survival and acute rejection. The modified abdominal suture technique and abdominal cuff technique have their respective advantages in research applications. The novel cervical cuff technique for ectopic kidney transplantation model is relatively simple to be prepared and causes less trauma to the mice, providing more options for studies involving xenotransplantation, secondary transplantation, and local lymphatic drainage. However, the difficulty in harvesting the donor kidney and the high incidence of ureteral infections need further validation in long-term survival. This study holds important reference value for choosing the type of mouse kidney transplantation model for different research needs.

Comparison of admittance and cardiac magnetic resonance generated pressure-volume loops in a porcine model.

Objective. Pressure-volume loop analysis, traditionally performed by invasive pressure and volume measurements, is the optimal method for assessing ventricular function, while cardiac magnetic resonance (CMR) imaging is the gold standard for ventricular volume estimation. The aim of this study was to investigate the agreement between the assessment of end-systolic elastance (Ees) assessed with combined CMR and simultaneous pressure catheter measurements compared with admittance catheters in a porcine model.Approach. Seven healthy pigs underwent admittance-based pressure-volume loop evaluation followed by a second assessment with CMR during simultaneous pressure measurements.Main results. Admittance overestimated end-diastolic volume for both the left ventricle (LV) and the right ventricle (RV) compared with CMR. Further, there was an underestimation of RV end-systolic volume with admittance. For the RV, however, Ees was systematically higher when assessed with CMR plus simultaneous pressure measurements compared with admittance whereas there was no systematic difference in Ees but large differences between admittance and CMR-based methods for the LV.Significance. LV and RV Ees can be obtained from both admittance and CMR based techniques. There were discrepancies in volume estimates between admittance and CMR based methods, especially for the RV. RV Ees was higher when estimated by CMR with simultaneous pressure measurements compared with admittance.

Ex Vivo Porcine Experimental Model for Studying and Teaching Lung Mechanics.

Mechanical ventilation is widely used and requires specific knowledge for understanding and management. Health professionals in this field may feel insecure and lack knowledge because of inadequate training and teaching methods. Therefore, the objective of this article is to outline the steps involved in generating an ex vivo porcine lung model to be used in the future, to study and teach lung mechanics. To generate the model, five porcine lungs were carefully removed from the thorax following the guidelines of the Animal Research Ethics Committee with adequate care and were connected to the mechanical ventilator through a tracheal cannula. These lungs were then subjected to the alveolar recruitment maneuver. Respiratory mechanics parameters were recorded, and video cameras were used to obtain videos of the lungs during this process. This process was repeated for five consecutive days. When not used, the lungs were kept refrigerated. The model showed different lung mechanics after the alveolar recruitment maneuver every day; not being influenced by the days, only by the maneuver. Therefore, we conclude that the ex vivo lung model can provide a better understanding of lung mechanics and its effects, and even of the alveolar recruitment maneuver through visual feedback during all stages of the process.

Laboratory Maintenance of the Lower Dipteran Fly Bradysia (Sciara) coprophila: A New/Old Emerging Model Organism.

Laboratory stocks of the lower dipteran fly, Bradysia (Sciara) coprophila, have been maintained for over a century. Protocols for laboratory upkeep of B. coprophila are presented here. These protocols will be useful for the rapidly increasing number of laboratories studying B. coprophila to take advantage of its unique biological features, which include (1) a monopolar spindle in male meiosis I; (2) non-disjunction of the X dyad in male meiosis II; (3) chromosome imprinting to distinguish maternal from paternal homologs; (4) germ line-limited (L) chromosomes; (5) chromosome elimination (paternal chromosomes in male meiosis I; one to two X chromosomes in early embryos; L chromosomes from the soma in early embryos); (6) sex determination by the mother (there is no Y chromosome); and (7) developmentally regulated DNA amplification at the DNA puff loci in larval salivary gland polytene chromosomes. It is now possible to explore these many unique features of chromosome mechanics by using the recent advances in sequencing and assembly of the B. coprophila genome and the development of transformation methodology for genomic engineering. The growing scientific community that uses B. coprophila for research will benefit from the protocols described here for mating the flies (phenotypic markers for mothers that will have only sons or only daughters; details of mass mating for biochemical experiments), checking embryo hatch, feeding larvae, and other comments on its rearing.

All-suture anchor size and drill angle influence load to failure in a porcine model of subpectoral biceps tenodesis, a biomechanical study.

BACKGROUND: Tenodesis of the long head of the biceps tendon is frequently performed in shoulder surgery, and all-suture anchors have become more popular as fixation methods. However, uncertainty still exists regarding the ultimate load to failure of all-suture anchors and the best insertion angle at a cortical humeral insertion point. PURPOSE: The purpose of this study was to compare the biomechanical characteristics of three types of all-suture anchors frequently used for biceps tenodesis. In addition, the influence of two different insertion angles was observed in a porcine humeri model. METHODS: The ultimate load to failure and failure mode of three types of all-suture anchors (1.6 FiberTak®, 1.9 FiberTak®, 2.6 FiberTak®, Arthrex®) applicable for subpectoral biceps tenodesis were evaluated at 90° and 45° insertion angles in 12 fresh-frozen porcine humeri. The anchors were inserted equally alternated in a randomized manner at three different insertion sites along the bicipital groove, and the suture tapes were knotted around a rod for pullout testing. In total, 36 anchors were evaluated in a universal testing machine (Zwick & Roell). RESULTS: The 2.6 FiberTak® shows higher ultimate loads to failure with a 90° insertion angle (944.0 N ± 169.7 N; 537.0 N ± 308.8 N) compared to the 1.9 FiberTak® (677.8 N ± 57.7 N; 426.3 N ± 167.0 N, p-value: 0.0080) and 1.6 FiberTak® (733.0 N ± 67.6 N; 450.0 N ± 155.8 N, p-value: 0.0018). All anchor types show significantly higher ultimate loads to failure and smaller standard deviations at the 90° insertion angle than at the 45° insertion angle. The major failure mode was anchor pullout. Only the 2.6 FiberTak® anchors showed suture breakage as the major failure mode when placed with a 90° insertion angle. CONCLUSIONS: All three all-suture anchors are suitable fixation methods for subpectoral biceps tenodesis. Regarding our data, we recommend 90° as the optimum insertion angle. CLINICAL RELEVANCE: The influence of anchor size and insertion angle of an all-suture anchor should be known by the surgeon for optimizing ultimate loads to failure and for achieving a secure fixation.

Immunology of Physical Exercise: Is Equus caballus an Appropriate Animal Model for Human Athletes?

Domestic horses routinely participate in vigorous and various athletic activities. This enables the horse to serve as a model for studying athletic physiology and immunology in other species, including humans. For instance, as a model of physical efforts, such as endurance rides (long-distance running/aerobic exercise) and races (anaerobic exercise), the horse can be useful in evaluating post-exercise response. Currently, there has been significant interest in finding biomarkers, which characterize the advancement of training and adaptation to physical exercise in the horse. The parallels in cellular responses to physical exercises, such as changes in receptor expression and blood cell activity, improve our understanding of the mechanisms involved in the body's response to intense physical activity. This study focuses on the changes in levels of the pro- and anti-inflammatory cytokines and cellular response in the context of post-exercise immune response. Both the direction of changes in cytokine levels and cellular responses of the body, such as proliferation and expression of surface markers on lymphocytes, monocytes and neutrophils, show cross-functional similarities. This review reveals that horses are robust research models for studying the immune response to physical exercise in human athletes.

Generating an organ-deficient animal model using a multi-targeted CRISPR-Cas9 system.

Gene-knockout animal models with organ-deficient phenotypes used for blastocyst complementation are generally not viable. Animals need to be maintained as heterozygous mutants, and homozygous mutant embryos yield only one-fourth of all embryos. In this study, we generated organ-deficient embryos using the CRISPR-Cas9-sgRNAms system that induces cell death with a single-guide RNA (sgRNAms) targeting multiple sites in the genome. The Cas9-sgRNAms system interrupted cell proliferation and induced cell ablation in vitro. The mouse model had Cas9 driven by the Foxn1 promoter with a ubiquitous expression cassette of sgRNAms at the Rosa26 locus (Foxn1Cas9; Rosa26_ms). It showed an athymic phenotype similar to that of nude mice but was not hairless. Eventually, a rat cell-derived thymus in an interspecies chimera was generated by blastocyst complementation of Foxn1Cas9; Rosa26_ms mouse embryos with rat embryonic stem cells. Theoretically, a half of the total embryos has the Cas9-sgRNAms system because Rosa26_ms could be maintained as homozygous.

Reproducibility of a semiautomatic lobar lung tissue assignment technique on noncontrast CT scans: a study on swine animal model.

BACKGROUND: To evaluate the reproducibility of a vessel-specific minimum cost path (MCP) technique used for lobar segmentation on noncontrast computed tomography (CT). METHODS: Sixteen Yorkshire swine (49.9 ± 4.7 kg, mean ± standard deviation) underwent a total of 46 noncontrast helical CT scans from November 2020 to May 2022 using a 320-slice scanner. A semiautomatic algorithm was employed by three readers to segment the lung tissue and pulmonary arterial tree. The centerline of the arterial tree was extracted and partitioned into six subtrees for lobar assignment. The MCP technique was implemented to assign lobar territories by assigning lung tissue voxels to the nearest arterial tree segment. MCP-derived lobar mass and volume were then compared between two acquisitions, using linear regression, root mean square error (RMSE), and paired sample t-tests. An interobserver and intraobserver analysis of the lobar measurements was also performed. RESULTS: The average whole lung mass and volume was 663.7 ± 103.7 g and 1,444.22 ± 309.1 mL, respectively. The lobar mass measurements from the initial (MLobe1) and subsequent (MLobe2) acquisitions were correlated by MLobe1 = 0.99 MLobe2 + 1.76 (r = 0.99, p = 0.120, RMSE = 7.99 g). The lobar volume measurements from the initial (VLobe1) and subsequent (VLobe2) acquisitions were correlated by VLobe1 = 0.98VLobe2 + 2.66 (r = 0.99, p = 0.160, RSME = 15.26 mL). CONCLUSIONS: The lobar mass and volume measurements showed excellent reproducibility through a vessel-specific assignment technique. This technique may serve for automated lung lobar segmentation, facilitating clinical regional pulmonary analysis. RELEVANCE STATEMENT: Assessment of lobar mass or volume in the lung lobes using noncontrast CT may allow for efficient region-specific treatment strategies for diseases such as pulmonary embolism and chronic thromboembolic pulmonary hypertension. KEY POINTS: • Lobar segmentation is essential for precise disease assessment and treatment planning. • Current methods for segmentation using fissure lines are problematic. • The minimum-cost-path technique here is proposed and a swine model showed excellent reproducibility for lobar mass measurements. • Interobserver agreement was excellent, with intraclass correlation coefficients greater than 0.90.

Modulation of Gut Microbial Community and Metabolism by Bacillus licheniformis HD173 Promotes the Growth of Nursery Piglets Model.

Maintaining the balance and stability of the gut microbiota is crucial for the gut health and growth development of humans and animals. Bacillus licheniformis (B. licheniformis) has been reported to be beneficial to the gut health of humans and animals, whereas the probiotic effects of a new strain, B. licheniformis HD173, remain uncertain. In this study, nursery piglets were utilized as animal models to investigate the extensive impact of B. licheniformis HD173 on gut microbiota, metabolites, and host health. The major findings were that this probiotic enhanced the growth performance and improved the health status of the nursery piglets. Specifically, it reduced the level of pro-inflammatory cytokines IL-1ß and TNF-α in the serum while increasing the level of IL-10 and SOD. In the gut, B. licheniformis HD173 reduced the abundance of pathogenic bacteria such as Mycoplasma, Vibrio, and Vibrio metschnikovii, while it increased the abundance of butyrate-producing bacteria, including Oscillospira, Coprococcus, and Roseburia faecis, leading to an enhanced production of butyric acid. Furthermore, B. licheniformis HD173 effectively improved the gut metabolic status, enabling the gut microbiota to provide the host with stronger metabolic abilities for nutrients. In summary, these findings provide scientific evidence for the utilization of B. licheniformis HD173 in the development and production of probiotic products for maintaining gut health in humans and animals.

Use of mixed gas pneumoperitoneum during minimally invasive surgery: a systematic review of human and mouse modelled laparoscopic interventions.

The formation of pneumoperitoneum involves the process of inflating the peritoneal cavity during laparoscopic and typically uses CO2 as the insufflation gas. This review aims to identify ideal gas mixtures for establishing the pneumoperitoneum with animal and human studies undertaken up to the writing of this review. A systematic search of PubMed, OVID, and clinicaltrials.gov was performed to identify studies on the utilisation of mixed gases in laparoscopic surgery, including non-randomised/randomised trials, animal and human studies, and studies with inflating pressures between 12 and 16 mmHg. ROBINS-I and RoB2 tool was used to assess the risk of bias. A narrative synthesis of results was performed due to the heterogeneity of the studies. 5 studies from the database search and 5 studies from citation search comprising 128 animal subjects and 61 human patients were found. These studies collated results based on adhesion formation (6 studies), pain scores (2 studies) and other outcomes, with results favouring the use of carbon dioxide + 10% nitrous oxide + 4% oxygen. This has shown a significant reduction in adhesion formation, pain scores and inflammation. The use of this gas mixture provides promising results for future practice. Several of the studies available require larger sample sizes to develop a more definitive answer on the effects of different gas mixtures. Furthermore, the number of confounding factors in randomised trials should be reduced so that each component of the current suggested gas mixture can be tested for safety and efficacy.

Animal models for partial heart transplantation.

BACKGROUND: Partial heart transplantation delivers growing heart valve implants by transplanting the part of the heart containing the necessary heart valve only. In contrast to heart transplantation, partial heart transplantation spares the native ventricles. This has important implications for partial heart transplant biology, including the allowable ischemia time, optimal graft preservation, primary graft dysfunction, immune rejection, and optimal immunosuppression. AIMS: Exploration of partial heart transplant biology will depend on suitable animal models. Here we review our experience with partial heart transplantation in rodents, piglets, and non-human primates. MATERIALS & METHODS: This review is based on our experience with partial heart transplantation using over 100 rodents, over 50 piglets and one baboon. RESULTS: Suitable animal models for partial heart transplantation include rodent heterotopic partial heart transplantation, piglet orthotopic partial heart transplantation, and non-human primate partial heart xenotransplantation. DISCUSSION: Rodent models are relatively cheap and offer extensive availability of research tools. However, rodent open-heart surgery is technically not feasible. This limits rodents to heterotopic partial heart transplant models. Piglets are comparable in size to children. This allows for open-heart surgery using clinical grade equipment for orthoptic partial heart transplantation. Piglets also grow rapidly, which is useful for studying partial heart transplant growth. Finally, nonhuman primates are immunologically most closely related to humans. Therefore, nonhuman primates are most suitable for studying partial heart transplant immunobiology and xenotransplantation. CONCLUSIONS: Animal research is a privilege that is contingent on utilitarian ethics and the 3R principles of replacement, reduction and refinement. This privilege allows the research community to seek fundamental knowledge about partial heart transplantation, and to apply this knowledge to enhance the health of children who require partial heart transplants.

Capillary malformations.

Capillary malformation (CM), or port wine birthmark, is a cutaneous congenital vascular anomaly that occurs in 0.1%-2% of newborns. Patients with a CM localized on the forehead have an increased risk of developing a neurocutaneous disorder called encephalotrigeminal angiomatosis or Sturge-Weber syndrome (SWS), with complications including seizure, developmental delay, glaucoma, and vision loss. In 2013, a groundbreaking study revealed causative activating somatic mutations in the gene (GNAQ) encoding guanine nucleotide-binding protein Q subunit α (Gαq) in CM and SWS patient tissues. In this Review, we discuss the disease phenotype, the causative GNAQ mutations, and their cellular origin. We also present the endothelial Gαq-related signaling pathways, the current animal models to study CM and its complications, and future options for therapeutic treatment. Further work remains to fully elucidate the cellular and molecular mechanisms underlying the formation and maintenance of the abnormal vessels.

Establishment of animal models and behavioral studies for autism spectrum disorders.

In recent years, the incidence of autism spectrum disorder (ASD) has increased, but the etiology and pathogenesis remain unclear. In this narrative review, we review and systematically summarize the methods used to construct animal models to study ASD and the related behavioral studies based on recent literature. Utilization of various ASD animal models can complement research on the etiology, pathogenesis, and core behaviors of ASD, providing information and a foundation for further basic research and clinical treatment of ASD.