Preclinical renal chemo-protective potential of Prunus amygdalus Batsch seed coat via alteration of multiple molecular pathways.

Prunus amygdalus Batsch (almond) is a classical nutritive traditional Indian medicine. Along with nutritive with anti-oxidant properties, it is, clinically, used in the treatment of various diseases with underlying anti-oxidant mechanism. This study is an effort to scrutinise the renal protective effect of P. amygdalus Batsch or green almond (GA) seed coat extract and its underlying mechanism in animal model of Ferric nitrilotriacetate (Fe-NTA) induced renal cell carcinoma (RCC). RCC was induced in Swiss Albino Wistar rats by intraperitoneal injection of Fe-NTA. The rats were then treated with ethanolic extract of GA (25, 50 and 100 mg/kg per oral) for 22 weeks. Efficacy of GA administration was evaluated by change in biochemical, renal, macroscopical and histopathological parameters and alterations. Additionally, interleukin-6 (IL-6), tumour necrosis factor-α (TNF-α), interleukin-1ß (IL-1ß) and inflammatory mediator including prostaglandin E2 (PGE2), nuclear factor-kappa B (NF-κB) were also observed to explore the possible mechanisms. The oral administration of GA significantly (p < .001) altered the Fe-NTA induced RCC in rats by inhibition of renal nodules, decolourisation of tissues, tumour promoter marker including thymidine 3[H] incorporation, ornithine decarboxylase, renal parameters and anti-oxidant parameters in serum. Additionally, GA treatment significantly (p < .001) down-regulated the IL-6, IL-1ß, TNF-α, inflammatory mediators PGE2 and NF-κB in a dose-dependent manner. Histopathology observation supported the renal protective effect of GA by alteration in necrosis, size of Bowman capsules and inflammatory cells. Hence, it can be concluded that GA possesses observable chemo-protective action and effect on Fe-NTA induced RCC via dual inhibition mechanism one by inhibiting free radical generation and second by inhibiting inflammation.

Socio-ecological costs of Amazon nut and timber production at community household forests in the Bolivian Amazon.

The Bolivian Amazon holds a complex configuration of people and forested landscapes in which communities hold secure tenure rights over a rich ecosystem offering a range of livelihood income opportunities. A large share of this income is derived from Amazon nut (Bertholletia excelsa). Many communities also have long-standing experience with community timber management plans. However, livelihood needs and desires for better living conditions may continue to place these resources under considerable stress as income needs and opportunities intensify and diversify. We aim to identify the socioeconomic and biophysical factors determining the income from forests, husbandry, off-farm and two keystone forest products (i.e., Amazon nut and timber) in the Bolivian Amazon region. We used structural equation modelling tools to account for the complex inter-relationships between socioeconomic and biophysical factors in predicting each source of income. The potential exists to increase incomes from existing livelihood activities in ways that reduce dependency upon forest resources. For example, changes in off-farm income sources can act to increase or decrease forest incomes. Market accessibility, social, financial, and natural and physical assets determined the amount of income community households could derive from Amazon nut and timber. Factors related to community households' local ecological knowledge, such as the number of non-timber forest products harvested and the number of management practices applied to enhance Amazon nut production, defined the amount of income these households could derive from Amazon nut and timber, respectively. The (inter) relationships found among socioeconomic and biophysical factors over income shed light on ways to improve forest-dependent livelihoods in the Bolivian Amazon. We believe that our analysis could be applicable to other contexts throughout the tropics as well.

Toxic and essential elements in five tree nuts from Hangzhou market, China.

In this study, a total of 35 tree nut samples of walnut, pecan, pine seed, hickory nut and torreya were obtained from 5 farm product markets in Hangzhou, China, and investigated for essential (Cr, Mn, Fe, Mo, Cu, Zn, Se and Sr) and toxic (Al, As, Cd and Pb) elements by inductively coupled plasma-mass spectroscopy. Mean elemental concentrations of different tree nuts were in the following ranges: Cr 0.26-0.78 mg kg-1, Mn 42.1-174 mg kg-1, Fe 33.7-43.9 mg kg-1, Mo 0.11-0.48 mg kg-1, Cu 10.3-17.6 mg kg-1, Zn 21.6-56.1 mg kg-1, Se 0.015-0.051 mg kg-1, Al 1.44-37.6 mg kg-1, As 0.0062-0.047 mg kg-1, Cd 0.016-0.18 mg kg-1 and Pb 0.0069-0.029 mg kg-1. The estimated provisional tolerable daily intake of Al, As, Cd and Pb was much lower than the provisional tolerable daily intake.

Effect of high pressure processing on dispersive and aggregative properties of almond milk.

BACKGROUND: A study was conducted to investigate the impact of high pressure (450 and 600 MPa at 30 °C) and thermal (72, 85 and 99 °C at 0.1 MPa) treatments on dispersive and aggregative characteristics of almond milk. Experiments were conducted using a kinetic pressure testing unit and water bath. Particle size distribution, microstructure, UV absorption spectra, pH and color changes of processed and unprocessed samples were analyzed. RESULTS: Raw almond milk represented the mono model particle size distribution with average particle diameters of 2 to 3 µm. Thermal or pressure treatment of almond milk shifted the particle size distribution towards right and increased particle size by five- to six-fold. Micrographs confirmed that both the treatments increased particle size due to aggregation of macromolecules. Pressure treatment produced relatively more and larger aggregates than those produced by heat treated samples. The apparent aggregation rate constant for 450 MPa and 600 MPa processed samples were k450MPa,30°C = 0.0058 s(-1) and k600MPa,30°C = 0.0095 s(-1) respectively. CONCLUSIONS: This study showed that dispersive and aggregative properties of high pressure and heat-treated almond milk were different due to differences in protein denaturation, particles coagulation and aggregates morphological characteristics. Knowledge gained from the study will help food processors to formulate novel plant-based beverages treated with high pressure. © 2015 Society of Chemical Industry.

Aflatoxin evaluation in ready-to-eat brazil nuts using reversed-phase liquid chromatography and post-column derivatisation.

A high-performance liquid chromatography-fluorescence (HPLC-FD) method for aflatoxin quantification in brazil nuts was developed. Samples of brazil nuts collected in Brazilian markets were extracted with methanol:water and cleaned using an immunoaffinity column. Aflatoxins were eluted with methanol and a post-column derivatisation was performed with bromine, using a Kobra Cell system. The optimised method for total aflatoxins was sensitive, with detection and quantification limits of 0.05 and 0.25 µg kg⁻¹, respectively. The method was accurate, with recovery values of 87.6%; 85.3% and 85.0% for 0.5, 5.0 and 14.6 µg kg⁻¹ spiked levels, respectively. It was shown that the method was applicable to brazil nuts. From a total of 95 brazil nut samples analysed from 21 São Paulo supermarket samples and 51 Manaus and 23 Belém street markets samples, 37.9% showed detectable levels of aflatoxins and three exceeded the recommended Codex Alimentarius limit of 10 µg kg⁻¹ for ready-to-eat brazil nuts.

Gluten contamination of naturally gluten-free flours and starches used by Canadians with celiac disease.

A large national investigation into the extent of gluten cross-contamination of naturally gluten-free ingredients (flours and starches) sold in Canada was performed. Samples (n = 640) were purchased from eight Canadian cities and via the internet during the period 2010-2012 and analysed for gluten contamination. The results showed that 61 of the 640 (9.5%) samples were contaminated above the Codex-recommended maximum level for gluten-free products (20 mg kg⁻¹) with a range of 5-7995 mg kg⁻¹. For the ingredients that were labelled gluten-free the contamination range (5-141 mg kg⁻¹) and number of samples were lower (3 of 268). This picture was consistent over time, with approximately the same percentage of samples above 20 mg kg⁻¹ in both the initial set and the subsequent lot. Looking at the total mean (composite) contamination for specific ingredients the largest and most consistent contaminations come from higher fibre ingredients such as soy (902 mg kg⁻¹), millet (272 mg kg⁻¹) and buckwheat (153 mg kg⁻¹). Of the naturally gluten-free flours and starches tested that do not contain a gluten-free label, the higher fibre ingredients would constitute the greatest probability of being contaminated with gluten above 20 mg kg⁻¹.

Characterization of pine nuts in the U.S. market, including those associated with "pine mouth", by GC-FID.

Taste disturbances following consumption of pine nuts, referred to as "pine mouth", have been reported by consumers in the United States and Europe. Nuts of Pinus armandii have been associated with pine mouth, and a diagnostic index (DI) measuring the content of Δ5-unsaturated fatty acids relative to that of their fatty acid precursors has been proposed for identifying nuts from this species. A 100 m SLB-IL 111 GC column was used to improve fatty acid separations, and 45 pine nut samples were analyzed, including pine mouth-associated samples. This study examined the use of a DI for the identification of mixtures of pine nut species and showed the limitation of morphological characteristics for species identification. DI values for many commercial samples did not match those of known reference species, indicating that the majority of pine nuts collected in the U.S. market, including those associated with pine mouth, are mixtures of nuts from different Pinus species.

Aflatoxin in raw walnut kernels marketed in Tehran, Iran.

The occurrence of aflatoxin in 35 samples of raw walnuts, which were randomly collected from Iranian supermarkets in Tehran, was examined. Analysis of aflatoxin was performed by solvent extraction and immunoaffinity clean-up followed by determination using high-performance liquid chromatography with fluorescence detection. Limits of detection (LOD) for the aflatoxins were 0.03-0.25 ng g⁻¹. Limits of quantification (LOQ) were 0.12-0.80 ng g⁻¹. Total aflatoxin concentrations in the samples ranged from 0 to 112.8 ng g⁻¹. About 74.3% of the samples were contaminated with aflatoxins, of which 20.0% exceeded the maximum tolerable limit of 15 ng g⁻¹ set by Codex.