Structural Characterization of Monoclonal Antibodies and Epitope Mapping by FFAP Footprinting.

Covalent labeling in combination with mass spectrometry is a powerful approach used in structural biology to study protein structures, interactions, and dynamics. Recently, the toolbox of covalent labeling techniques has been expanded with fast fluoroalkylation of proteins (FFAP). FFAP is a novel radical labeling method that utilizes fluoroalkyl radicals generated from hypervalent Togni reagents for targeting aromatic residues. This report further demonstrates the benefits of FFAP as a new method for structural characterization of therapeutic antibodies and interaction interfaces of antigen-antibody complexes. The results obtained from human trastuzumab and its complex with human epidermal growth factor receptor 2 (HER2) correlate well with previously published structural data and demonstrate the potential of FFAP in structural biology.

Carbene Footprinting Directs Design of Genetically Encoded Proximity-Reactive Protein Binders.

Genetically encoding proximal-reactive unnatural amino acids (PrUaas), such as fluorosulfate-l-tyrosine (FSY), into natural proteins of interest (POI) confer the POI with the ability to covalently bind to its interacting proteins (IPs). The PrUaa-incorporated POIs hold promise for blocking undesirable POI-IP interactions. Selecting appropriate PrUaa anchor sites is crucial, but it remains challenging with the current methodology, which heavily relies on crystallography to identify the proximal residues between the POIs and the IPs for the PrUaa anchorage. To address the challenge, here, we propose a footprinting-directed genetically encoded covalent binder (footprinting-GECB) approach. This approach employs carbene footprinting, a structural mass spectrometry (MS) technique that quantifies the extent of labeling of the POI following the addition of its IP, and thus identifies the responsive residues. By genetically encoding PrUaa into these responsive sites, POI variants with covalent bonding ability to its IP can be produced without the need for crystallography. Using the POI-IP model, KRAS/RAF1, we showed that engineering FSY at the footprint-assigned KRAS residue resulted in a KRAS variant that can bind irreversibly to RAF1. Additionally, we inserted FSY at the responsive residue in RAF1 upon footprinting the oncogenic KRASG12D/RAF1, which lacks crystal structure, and generated a covalent binder to KRASG12D. Together, we demonstrated that by adopting carbene footprinting to direct PrUaa anchorage, we can greatly expand the opportunities for designing covalent protein binders for PPIs without relying on crystallography. This holds promise for creating effective PPI inhibitors and supports both fundamental research and biotherapeutics development.

Evaluating Mass Spectrometry-Based Hydroxyl Radical Protein Footprinting of a Benchtop Flash Oxidation System against a Synchrotron X-ray Beamline.

Hydroxyl radical protein footprinting (HRPF) using synchrotron X-ray radiation (XFP) and mass spectrometry is a well-validated structural biology method that provides critical insights into macromolecular structural dynamics, such as determining binding sites, measuring affinity, and mapping epitopes. Numerous alternative sources for generating the hydroxyl radicals (•OH) needed for HRPF, such as laser photolysis and plasma irradiation, complement synchrotron-based HRPF, and a recently developed commercially available instrument based on flash lamp photolysis, the FOX system, enables access to laboratory benchtop HRPF. Here, we evaluate performing HRPF experiments in-house with a benchtop FOX instrument compared to synchrotron-based X-ray footprinting at the NSLS-II XFP beamline. Using lactate oxidase (LOx) as a model system, we carried out •OH labeling experiments using both instruments, followed by nanoLC-MS/MS bottom-up peptide mass mapping. Experiments were performed under high glucose concentrations to mimic the highly scavenging conditions present in biological buffers and human clinical samples, where less •OH are available for reaction with the biomolecule(s) of interest. The performance of the FOX and XFP HRPF methods was compared, and we found that tuning the •OH dosage enabled optimal labeling coverage for both setups under physiologically relevant highly scavenging conditions. Our study demonstrates the complementarity of FOX and XFP labeling approaches, demonstrating that benchtop instruments such as the FOX photolysis system can increase both the throughput and the accessibility of the HRPF technique.

Systematic Fe(II)-EDTA Method of Dose-Dependent Hydroxyl Radical Generation for Protein Oxidative Footprinting.

Correlating the structure and dynamics of proteins with biological function is critical to understanding normal and dysfunctional cellular mechanisms. We describe a quantitative method of hydroxyl radical generation via Fe(II)-ethylenediaminetetraacetic acid (EDTA)-catalyzed Fenton chemistry that provides ready access to protein oxidative footprinting using equipment commonly found in research and process control laboratories. Robust and reproducible dose-dependent oxidation of protein samples is observed and quantitated by mass spectrometry with as fine a single residue resolution. An oxidation analysis of lysozyme provides a readily accessible benchmark for our method. The efficacy of our oxidation method is demonstrated by mapping the interface of a RAS-monobody complex, the surface of the NIST mAb, and the interface between PRC2 complex components. These studies are executed using standard laboratory tools and a few pennies of reagents; the mass spectrometry analysis can be streamlined to map the protein structure with single amino acid residue resolution.

Dimethylthiourea as a Quencher in Hydroxyl Radical Protein Footprinting Experiments.

Hydroxyl radical protein footprinting (HRPF) is a mass-spectrometry-based method for studying protein structures, interactions, conformations, and folding. This method is based on the irreversible labeling of solvent-exposed amino acid side chains by hydroxyl radicals. While catalase is commonly used as a quencher after the labeling of a protein by the hydroxyl radicals to efficiently remove the remaining hydrogen peroxide, it has some disadvantages. Catalase quenching adds a relatively high amount of protein to the sample, limiting the sensitivity of the method due to dynamic range issues and causing significant issues when dealing with more complex samples. We evaluated dimethylthiourea (DMTU) as a replacement for catalase in the quenching HRPF reactions. We observed that DMTU is highly effective at quenching HRPF oxidation. DMTU does not cause the background protein issues that catalase does, resulting in an increased number of protein identifications from complex mixtures. We recommend the replacement of catalase quenching with DMTU for all HRPF experiments.

Intact mass spectrometry screening to optimize hydroxyl radical dose for protein footprinting.

Hydroxyl radical protein footprinting (HRPF) using synchrotron radiation is a well-validated method to assess protein structure in the native solution state. In this method, X-ray radiolysis of water generates hydroxyl radicals that can react with solvent accessible side chains of proteins, with mass spectrometry used to detect the resulting labeled products. An ideal footprinting dose provides sufficient labeling to measure the structure but not so much as to influence the results. The optimization of hydroxyl radical dose is typically performed using an indirect Alexa488 fluorescence assay sensitive to hydroxyl radical concentration, but full evaluation of the experiment's outcome relies upon bottom-up liquid chromatography mass spectrometry (LC-MS) measurements to directly determine sites and extent of oxidative labeling at the peptide and protein level. A direct evaluation of the extent of labeling to provide direct and absolute measurements of dose and "safe" dose ranges in terms of, for example, average numbers of labels per protein, would provide immediate feedback on experimental outcomes prior to embarking on detailed LC-MS analyses. To this end, we describe an approach to integrate intact MS screening of labeled samples immediately following exposure, along with metrics to quantify the extent of observed labeling from the intact mass spectra. Intact MS results on the model protein lysozyme were evaluated in the context of Alexa488 assay results and a bottom-up LC-MS analysis of the same samples. This approach provides a basis for placing delivered hydroxyl radical dose metrics on firmer technical grounds for synchrotron X-ray footprinting of proteins, with explicit parameters to increase the likelihood of a productive experimental outcome. Further, the method directs approaches to provide absolute and direct dosimetry for all types of labeling for protein footprinting.

Workflow for Validating Specific Amino Acid Footprinting Reagents for Protein Higher Order Structure Elucidation.

Protein footprinting mass spectrometry probes protein higher order structure and dynamics by labeling amino acid side-chains or backbone amides as a function of solvent accessibility. One category of footprinting uses residue-specific, irreversible covalent modifications, affording flexibility of sample processing for bottom-up analysis. Although several specific amino acid footprinting technologies are becoming established in structural proteomics, there remains a need to assess fundamental properties of new reagents before their application. Often, footprinting reagents are applied to complex or novel protein systems soon after their discovery and sometimes without a thorough investigation of potential downsides of the reagent. In this work, we assemble and test a validation workflow that utilizes cyclic peptides and a model protein to characterize benzoyl fluoride, a recently published, next-generation nucleophile footprinter. The workflow includes the characterization of potential side-chain reactive groups, reaction "quench" efficacies, reagent considerations and caveats (e.g., buffer pH), residue-specific kinetics compared to those of established reagents, and protein-wide characterization of modification sites with considerations for proteolysis. The proposed workflow serves as a starting point for improved footprinting reagent discovery, validation, and introduction, the aspects of which we recommend before applying to unknown protein systems.

Development of Spheroid-FPOP: An In-Cell Protein Footprinting Method for 3D Tumor Spheroids.

Many cancer drugs fail at treating solid epithelial tumors with hypoxia and insufficient drug penetration thought to be contributing factors to the observed chemoresistance. Owing to this, it is imperative to evaluate potential cancer drugs in conditions as close to in vivo as possible, which is not always done. To address this, we developed a mass spectrometry-based protein footprinting method for exploring the impact of hypoxia on protein in 3D colorectal cancer cells. Our group has previously extended the protein footprinting method fast photochemical oxidation of proteins (FPOP) for live cell analysis (IC-FPOP); however, this is the first application of IC-FPOP in a 3D cancer model. In this study, we perform IC-FPOP on intact spheroids (Spheroid-FPOP) using a modified version of the static platform incubator with an XY movable stage (PIXY) FPOP platform. We detected modification in each of three spheroid layers, even the hypoxic core. Pathway analysis revealed protein modifications in over 10 distinct protein pathways, including some involved in protein ubiquitination; a process modulated in cancer pathologies. These results demonstrate the feasibility of Spheroid-FPOP to be utilized as a tool to interrogate protein interactions within a native tumor microenvironment.

Top-Down Detection of Oxidative Protein Footprinting by Collision-Induced Dissociation, Electron-Transfer Dissociation, and Electron-Capture Dissociation.

Fast photochemical oxidation of proteins (FPOP) footprinting is a structural mass spectrometry method that maps proteins by fast and irreversible chemical reactions. The position of oxidative modification reflects solvent accessibility and site reactivity and thus provides information about protein conformation, structural dynamics, and interactions. Bottom-up mass spectrometry is an established standard method to analyze FPOP samples. In the bottom-up approach, all forms of the protein are digested together by a protease of choice, which results in a mixture of peptides from various subpopulations of proteins with varying degrees of photochemical oxidation. Here, we investigate the possibility to analyze a specifically selected population of only singly oxidized proteins. This requires utilization of more specific top-down mass spectrometry approaches. The key element of any top-down experiment is the selection of a suitable method of ion isolation, excitation, and fragmentation. Here, we employ and compare collision-induced dissociation, electron-transfer dissociation, and electron-capture dissociation combined with multi-continuous accumulation of selected ions. A singly oxidized subpopulation of FPOP-labeled ubiquitin was used to optimize the method. The top-down approach in FPOP is limited to smaller proteins, but its usefulness was demonstrated by using it to visualize structural changes induced by co-factor removal from the holo/apo myoglobin system. The top-down data were compared with the literature and with the bottom-up data set obtained on the same samples. The top-down results were found to be in good agreement, which indicates that monitoring a singly oxidized FPOP ion population by the top-down approach is a functional workflow for oxidative protein footprinting.

Multiplex Chemical Labeling of Amino Acids for Protein Footprinting Structure Assessment.

Protein footprinting with mass spectrometry is an established structural biology technique for mapping solvent accessibility and assessing molecular-level interactions of proteins. In hydroxyl radical protein footprinting (HRPF), hydroxyl (OH) radicals generated by water radiolysis or other methods covalently label protein side chains. Because of the wide dynamic range of OH reactivity, not all side chains are easily detected in a single experiment. Novel reagent development and the use of radical chain reactions for labeling, including trifluoromethyl radicals, is a potential approach to normalize the labeling across a diverse set of residues. HRPF in the presence of a trifluoromethylation reagent under the right conditions could provide a "one-pot" reaction for multiplex labeling of protein side chains. Toward this goal, we have systematically evaluated amino acid labeling with the recently investigated Langlois' reagent (LR) activated by X-ray-mediated water radiolysis, followed by three different mass spectrometry methods. We compared the reactivity of CF3 and OH radical labeling for all 20 protein side chains in a competition-free environment. We found that all 20 amino acids exhibited CF3 or OH labeling in LR. Our investigations provide the evidence and knowledge set to perfect hydroxyl radical-activated trifluoromethyl chemistry as "one-pot" reaction for multiplex labeling of protein side chains to achieve higher resolution in HRPF.

Validated determination of NRG1 Ig-like domain structure by mass spectrometry coupled with computational modeling.

High resolution hydroxyl radical protein footprinting (HR-HRPF) is a mass spectrometry-based method that measures the solvent exposure of multiple amino acids in a single experiment, offering constraints for experimentally informed computational modeling. HR-HRPF-based modeling has previously been used to accurately model the structure of proteins of known structure, but the technique has never been used to determine the structure of a protein of unknown structure. Here, we present the use of HR-HRPF-based modeling to determine the structure of the Ig-like domain of NRG1, a protein with no close homolog of known structure. Independent determination of the protein structure by both HR-HRPF-based modeling and heteronuclear NMR was carried out, with results compared only after both processes were complete. The HR-HRPF-based model was highly similar to the lowest energy NMR model, with a backbone RMSD of 1.6 Å. To our knowledge, this is the first use of HR-HRPF-based modeling to determine a previously uncharacterized protein structure.

Benzoyl Transfer for Footprinting Alcohol-Containing Residues in Higher Order Structural Applications of Mass-Spectrometry-Based Proteomics.

Protein footprinting mass spectrometry (MS), an emerging approach to elucidate higher-order structure (HOS) and binding, benefits from the iterative development of reaction strategies to expand the covalent labeling toolbox. Herein, we introduce a footprinting reagent for nucleophiles and demonstrate its efficacy for differential covalent labeling MS analysis. Benzoyl fluoride (BF), although reactive with water, is more practical for modifying nucleophilic functional groups than other acid halides and serves as an acyl-transfer reagent for proteins. BF is 10 times more reactive with phenolic Tyr than the current generation nucleophile footprinter. BF modifies, in addition to Tyr, Lys, His, and the N-terminus, weak nucleophiles Ser and Thr, for which few footprinters exist, imparting broad applicability with a range of nucleophiles. We applied benzoylation to a model Ser- and Thr-rich protein-ligand binding system without perturbing the protein HOS. This efficacious footprinting method expands the toolbox of reagents and provides promise for future reaction strategies including possibly membrane proteins.

Hydroxyl Radical Protein Footprinting: A Mass Spectrometry-Based Structural Method for Studying the Higher Order Structure of Proteins.

Hydroxyl radical protein footprinting (HRPF) coupled to mass spectrometry has been successfully used to investigate a plethora of protein-related questions. The method, which utilizes hydroxyl radicals to oxidatively modify solvent-accessible amino acids, can inform on protein interaction sites and regions of conformational change. Hydroxyl radical-based footprinting was originally developed to study nucleic acids, but coupling the method with mass spectrometry has enabled the study of proteins. The method has undergone several advancements since its inception that have increased its utility for more varied applications such as protein folding and the study of biotherapeutics. In addition, recent innovations have led to the study of increasingly complex systems including cell lysates and intact cells. Technological advances have also increased throughput and allowed for better control of experimental conditions. In this review, we provide a brief history of the field of HRPF and detail recent innovations and applications in the field.

Systematic workflow for studying domain contributions of bispecific antibodies to selectivity in multimodal chromatography.

In this article, a systematic workflow was formulated and implemented to understand selectivity differences and preferred binding patches for bispecific monoclonal antibodies (mAbs) and their parental mAbs on three multimodal cation exchange resin systems. This workflow incorporates chromatographic screening of the parent mAbs and their fragments at various pH followed by surface property mapping and protein footprinting using covalent labeling followed by liquid chromatography-mass spectrometry analysis. The chromatography screens on multimodal resins with the intact mAbs indicated enhanced selectivity as compared to single-mode interaction systems. While the bispecific antibody (bsAb) eluted between the two parental mAbs on most of the resins, the retention of the bispecific transitioned from co-eluting with one parental mAb to the other parental mAb on Capto MMC. To investigate the contribution of different domains, mAb fragments were evaluated and the results indicated that the interactions were likely dominated by the Fab domain at higher pH. Protein surface property maps were then employed to hypothesize the potential preferred binding patches in the solvent-exposed regions of the parental Fabs. Finally, protein footprinting was carried out with the parental mAbs and the bsAb in the bound and unbound states at pH 7.5 to identify the preferred binding patches. Results with the intact mAb analysis supported the hypothesis that interactions with the resins were primarily driven by the residues in the Fab fragments and not the Fc. Furthermore, peptide mapping data indicated that the light chain may be playing a more important role in the higher binding of Parent A as compared with Parent B in these resin systems. Finally, results with the bsAb indicated that both halves of the molecule contributed to binding with the resins, albeit with subtle differences as compared to the parental mAbs. The workflow presented in this paper lays the foundation to systematically study the chromatographic selectivity of large multidomain molecules which can provide insights into improved biomanufacturability and expedited downstream bioprocess development.

Hydroxyl radical footprinting analysis of a human haptoglobin-hemoglobin complex.

Methods of structural mass spectrometry have become more popular to study protein structure and dynamics. Among them, fast photochemical oxidation of proteins (FPOP) has several advantages such as irreversibility of modifications and more facile determination of the site of modification with single residue resolution. In the present study, FPOP analysis was applied to study the hemoglobin (Hb) - haptoglobin (Hp) complex allowing identification of respective regions altered upon the complex formation. FPOP footprinting using a timsTOF Pro mass spectrometer revealed structural information for 84 and 76 residues in Hp and Hb, respectively, including statistically significant differences in the modification extent below 0.3%. The most affected residues upon complex formation were Met76 and Tyr140 in Hbα, and Tyr280 and Trp284 in Hpß. The data allowed determination of amino acids directly involved in Hb - Hp interactions and those located outside of the interaction interface yet affected by the complex formation. Also, previously modeled interaction between Hb ßTrp37 and Hp ßPhe292 was not confirmed by our data. Data are available via ProteomeXchange with identifier PXD021621.

Nanoparticles and photochemistry for native-like transmembrane protein footprinting.

Mass spectrometry-based footprinting can probe higher order structure of soluble proteins in their native states and serve as a complement to high-resolution approaches. Traditional footprinting approaches, however, are hampered for integral membrane proteins because their transmembrane regions are not accessible to solvent, and they contain hydrophobic residues that are generally unreactive with most chemical reagents. To address this limitation, we bond photocatalytic titanium dioxide (TiO2) nanoparticles to a lipid bilayer. Upon laser irradiation, the nanoparticles produce local concentrations of radicals that penetrate the lipid layer, which is made permeable by a simultaneous laser-initiated Paternò-Büchi reaction. This approach achieves footprinting for integral membrane proteins in liposomes, helps locate both ligand-binding residues in a transporter and ligand-induced conformational changes, and reveals structural aspects of proteins at the flexible unbound state. Overall, this approach proves effective in intramembrane footprinting and forges a connection between material science and biology.

Diethylpyrocarbonate Footprints a Membrane Protein in Micelles.

Membrane proteins play crucial roles in cell signaling and transport and, thus, are the targets of many small molecule drugs. The characterization of membrane protein structures poses challenges for the high-resolution biophysical tools because the transmembrane (TM) domain is hydrophobic, opening an opportunity for mass spectrometry (MS)-based footprinting. The hydrophobic reagent diethylpyrocarbonate (DEPC), a heavily studied footprinter for water-soluble proteins, can label up to 30% of surface residues via a straightforward protocol, streamlining the MS-based footprinting workflow. To test its applicability to membrane proteins, we footprinted vitamin K epoxide reductase (VKOR) membrane protein with DEPC. The results demonstrate that besides labeling the hydrophilic extracellular (extramembrane (EM)) domain, DEPC can also diffuse into the hydrophobic TM domain and subsequently label that region. The labeling process was facilitated by tip sonication to enhance reagent diffusion into micelles. We then analyzed the correlation between the residue modification extent and the theoretical accessible surface area percentage (%ASA); the data generally show good correlation with the residue location. Compared with conventional hydrophilic footprinters, the relatively hydrophobic DEPC can map a membrane protein's TM domain, suggesting that the reagent's hydrophobicity can be exploited to obtain structural information on the membrane-spanning region. This encouraging result should assist in the development of more efficient footprinters for membrane protein TM domain footprinting, enabled by further understanding the relationship between a reagent's hydrophobicity and its preferred labeling sites.

Denaturing cross-linking immunoprecipitation to identify footprints for RNA-binding proteins.

The isolation of protein-RNA complexes in the "denaturing cross-linked RNA immunoprecipitation" (dCLIP) protocol is based on biotin-tagging proteins of interest, UV cross-linking RNA to protein in vivo, RNase protection assay, and isolating RNA-protein complexes under denaturing conditions over a streptavidin column. Insofar as conventional antibody-based CLIP assays have been challenging to apply to Polycomb complexes, dCLIP has been applied successfully and yields small RNA footprints from which de novo motif analysis can be performed to identify RNA binding motifs. For complete details on the use and execution of this protocol, please refer to Rosenberg et al. (2017).

New high-throughput endstation to accelerate the experimental optimization pipeline for synchrotron X-ray footprinting.

Synchrotron X-ray footprinting (XF) is a growing structural biology technique that leverages radiation-induced chemical modifications via X-ray radiolysis of water to produce hydroxyl radicals that probe changes in macromolecular structure and dynamics in solution states of interest. The X-ray Footprinting of Biological Materials (XFP) beamline at the National Synchrotron Light Source II provides the structural biology community with access to instrumentation and expert support in the XF method, and is also a platform for development of new technological capabilities in this field. The design and implementation of a new high-throughput endstation device based around use of a 96-well PCR plate form factor and supporting diagnostic instrumentation for synchrotron XF is described. This development enables a pipeline for rapid comprehensive screening of the influence of sample chemistry on hydroxyl radical dose using a convenient fluorescent assay, illustrated here with a study of 26 organic compounds. The new high-throughput endstation device and sample evaluation pipeline now available at the XFP beamline provide the worldwide structural biology community with a robust resource for carrying out well optimized synchrotron XF studies of challenging biological systems with complex sample compositions.

Hydroxyl radical mediated damage of proteins in low oxygen solution investigated using X-ray footprinting mass spectrometry.

In the method of X-ray footprinting mass spectrometry (XFMS), proteins at micromolar concentration in solution are irradiated with a broadband X-ray source, and the resulting hydroxyl radical modifications are characterized using liquid chromatography mass spectrometry to determine sites of solvent accessibility. These data are used to infer structural changes in proteins upon interaction with other proteins, folding, or ligand binding. XFMS is typically performed under aerobic conditions; dissolved molecular oxygen in solution is necessary in many, if not all, the hydroxyl radical modifications that are generally reported. In this study we investigated the result of X-ray induced modifications to three different proteins under aerobic versus low oxygen conditions, and correlated the extent of damage with dose calculations. We observed a concentration-dependent protecting effect at higher protein concentration for a given X-ray dose. For the typical doses used in XFMS experiments there was minimal X-ray induced aggregation and fragmentation, but for higher doses we observed formation of covalent higher molecular weight oligomers, as well as fragmentation, which was affected by the amount of dissolved oxygen in solution. The higher molecular weight products in the form of dimers, trimers, and tetramers were present in all sample preparations, and, upon X-ray irradiation, these oligomers became non-reducible as seen in SDS-PAGE. The results provide an important contribution to the large body of X-ray radiation damage literature in structural biology research, and will specifically help inform the future planning of XFMS, and well as X-ray crystallography and small-angle X-ray scattering experiments.