Expression of Dickkopf-1 and Twist2 in Cervical Squamous Cell Carcinoma and Their Correlation with Vasculogenic Mimicry.

Wnt/ß-catenin signaling, epithelial-mesenchymal transition (EMT), and vasculogenic mimicry (VM) all exert important effects in tumors. Dickkopf-1 (DKK1) is an antagonist of the Wnt/ß-catenin, Twist homolog 2 (Twist2) is a key EMT transcription factor involved in cancer cell migration and invasion, and VM participates in the progression and metastasis of a variety of cancers. However, the correlation of DKK1, Twist2, and VM in cervical squamous cell carcinoma(CSC) is still unclear. This study focuses on correlations among these factors as well as their correlation with clinicopathologic data and survival in CSC. DKK1, Twist2, and VM expressions were immunohistochemically examined in 116 CSC tissues and 37 normal cervical tissues. Furthermore, clinical data were processed. The expression levels of these three factors differed between CSC and normal tissues. VM was observed in CSC, but not in normal cervical tissues. Twist2 expression was high in CSC but low in normal cervical tissues, whereas DKK1 expression had the opposite pattern. Tumor cells with VM had a high expression of Twist2 and low expression of DKK1. In addition, DKK1 expression was negatively correlated with Twist2 expression. Analyzing the relationships of DKK1, Twist2, and VM with the data of patients with CSC revealed that DKK1 expression was negatively correlated with the clinical stage, degree of differentiation, depth of infiltration, and lymph node metastasis of tumors. VM and Twist2 expression were positively correlated with the degree of differentiation, the depth of infiltration, and lymph node metastasis. The positive rate of VM was greater in stage II than in stage I. The patients who expressed VM and Twist2 had a reduced overall survival (OS) when compared with patients not expressing these proteins. However, the patients who expressed DKK1 had an increased OS when compared with patients who did not show any DKK1 expression. Multivariate analysis indicated that the expressions of DKK1, Twist2, and VM were prognostic factors for CSC. VM and the expression of DKK1 and Twist2 can be the potential prognostic biomarkers and therapeutic targets for CSC.

Canonical Wnt Signaling Drives Myopia Development and Can Be Pharmacologically Modulated.

Purpose: The purpose of this study was to evaluate the role of the canonical Wnt signaling in the development of the myopia. Methods: Plasma from adult patients with myopia, myopic animal models including the adenomatous polyposis coli (APC) gene mutation mouse model, and the form deprivation (FD) induced mouse model of myopia were used. Niclosamide, a canonical Wnt pathway inhibitor, was orally administrated in animal models. Plasma levels of DKK-1 were determined by using enzyme-linked immunosorbent assay. Refraction, vitreous chamber depth (VCD), axial length (AL), and other parameters, were measured at the end of the FD treatment. Canonical Wnt signaling changes were evaluated by Western blot analysis and immunostaining analysis. Results: Plasma level of Wnt inhibitor DKK-1 was markedly decreased in patients with myopia. Meanwhile, the canonical Wnt pathway was progressively activated during myopia development in mice. Moreover, inhibition of canonical Wnt signaling by niclosamide in mouse models markedly reduced lens thickness (LT), VCD, and AL elongation, resulting in myopia inhibition. Conclusions: Dysregulation of canonical Wnt signaling is a characteristic of myopia and targeting Wnt signaling pathways has potential as a therapeutic strategy for myopia.

Low-fluence laser-facilitated platelet-rich plasma permeation for treating MRSA-infected wound and photoaging of the skin.

Platelet-rich plasma (PRP) is rich in cytokines and growth factors and is a novel approach for tissue regeneration. It can be used for skin rejuvenation but the large molecular size of the actives limits its topical application. In this study, low-fluence laser-facilitated PRP was delivered to evaluate its effect on absorption through the skin, infection-induced wound, and photoaging. The PRP permeation enhancement was compared for two ablative lasers: fractional (CO2) laser and fully-ablative (Er:YAG) laser. In the Franz cell experiment, pig skin was treated with lasers with superficial ablation followed by the application of recombinant cytokines, growth factors, or PRP. The transport of interferon (IFN)-γ and tumor necrosis factor (TNF)-α was negligible in intact skin and stratum corneum (SC)-stripped skin. Both lasers significantly elevated skin deposition of IFN-γ and TNF-α from PRP, and fully-ablative laser showed a higher penetration enhancement. A similar tendency was found for vascular endothelial growth factor and epidermal growth factor. Er:YAG laser-exposed skin displayed 1.8- and 3.9-fold higher skin deposition of platelet-derived growth factor (PDGF)-BB and transforming growth factor (TGF)-ß1 from PRP, respectively. According to the confocal images, both laser interventions led to an extensive and deep distribution of IFN-γ and PDGF-BB in the skin. In the in vivo methicillin-resistant Staphylococcus aureus (MRSA) infection model, CO2 laser- and Er:YAG laser-assisted PRP delivery reduced bacterial load from 1.8 × 106 to 5.9 × 105 and 1.4 × 104 colony-forming units, respectively. The open wound induced by MRSA was closed by the laser-assisted PRP penetration. In the mouse photoaging model, elastin and collagen deposition were fully restored by combined PRP and full-ablative laser but not by PRP alone and PRP combined with fractional laser. Laser-facilitated PRP delivery even with a low fluence setting can be considered a promising strategy for treating some dermatological disorders.

Development and Application of a Physiologically-Based Pharmacokinetic Model to Predict the Pharmacokinetics of Therapeutic Proteins from Full-term Neonates to Adolescents.

Physiologically-based pharmacokinetic (PBPK) modelling provides an integrated framework to predict the disposition of small molecule drugs in children and is increasingly being used for dose recommendation and optimal design of paediatric studies and in regulatory submissions. Existing paediatric PBPK models can be adopted to describe the disposition of therapeutic proteins (TPs) in children by incorporating information on age-related changes of additional physiological and biological parameters (e.g. endogenous IgG, neonatal Fc receptor, lymph flow). In this study, physiological parameters were collated from literature and evaluated for any age-dependent trends. The age-dependent physiological parameters were used to construct a paediatric PBPK model for TPs. The model was then used to predict the pharmacokinetics of recombinant human erythropoietin (EPO), infliximab, etanercept, basiliximab, anakinra and enfuvirtide in paediatric subjects. The developed paediatric PBPK model predicted the drug concentration-time profiles reasonably well in full-term neonates (clinical PK data only available for EPO), infants, children and adolescents with the ratios of predicted over observed clearance values within 1.5-fold and 25 out of 26 clearance predictions were within 0.8- to 1.25-fold of the observed values. The clinically reported data are required to further assess the predictive accuracy of PK for Fc-containing proteins in term-born children younger than 2 months. This study demonstrates the ability of PBPK models accounting for age-dependent changes in relevant parameters to predict the pharmacokinetics of different types of TPs in paediatrics. The information gained from the PBPK models described here can facilitate our understanding of the complexities of TPs' disposition during growth and development.

An injectable thermosensitive hydrogel for sustained release of apelin-13 to enhance flap survival in rat random skin flap.

With the advantage of handy process, random pattern skin flaps are generally applied in limb reconstruction and wound repair. Apelin-13 is a discovered endogenous peptide, that has been shown to have potent multiple biological functions. Recently, thermosensitive gel-forming systems have gained increasing attention as wound dressings due to their advantages. In the present study, an apelin-13-loaded chitosan (CH)/ß-sodium glycerophosphate (ß-GP) hydrogel was developed for promoting random skin flap survival. Random skin flaps were created in 60 rats after which the animals were categorized to a control hydrogel group and an apelin-13 hydrogel group. The water content of the flap as well as the survival area were then measured 7 days post-surgery. Hematoxylin and eosin staining was used to evaluate the flap angiogenesis. Cell differentiation 34 (CD34) and vascular endothelial growth factor (VEGF) levels were detected by immunohistochemistry and Western blotting. Tumor necrosis factor-α (TNF-α) and interleukin-6 (IL-6) were assessed by enzyme linked immunosorbent assays (ELISAs). Oxidative stress was estimated via the activity of tissue malondialdehyde (MDA) and superoxide dismutase (SOD). Our results showed that CH/ß-GP/apelin-13 hydrogel could not only reduce the tissue edema, but also improve the survival area of flap. CH/ß-GP/apelin-13 hydrogel also upregulated levels of VEGF protein and increased mean vessel densities. Furthermore, CH/ß-GP/apelin-13 hydrogel was shown to significantly inhibit the expression of TNF-α and IL-6, along with increasing the activity of SOD and suppressing the MDA content. Taken together, these results indicate that this CH/ß-GP/apelin-13 hydrogel may be a potential therapeutic way for random pattern skin flap.

A genetically engineered Fc-binding amphiphilic polypeptide for congregating antibodies in vivo.

We report herein an affinity-based hydrogel used in creating subcutaneous depots of antibodies in vivo. The biomaterials design centered on pG_EAK, a polypeptide we designed and expressed in E. coli. The sequence consists of a truncated protein G (pG) genetically fused with repeats of the amphiphilic sequence AEAEAKAK ("EAK"). Capture of IgG was demonstrated in vitro in gels prepared from admixing pG_EAK and EAK ("pG_EAK/EAK gel"). The binding affinities and kinetics of pG for IgG were recapitulated in the pG_EAK polypeptide. Injecting IgG antibodies formulated with pG_EAK/EAK gel into subcutaneous space resulted in retention of the antibodies at the site for at least six days, whereas only signal at background levels was detected in grafts injected with IgG formulated in saline or diffusion-driven gel. The local retention of IgG in pG_EAK/EAK gel was correlated with limited distribution of the antibody in liver, spleen and lymph nodes, in contrast to those injected with antibodies formulated in saline or non-Fc binding EAK gel. In addition, antibodies formulated with pG_EAK/EAK gel and injected in mouse footpads were found to retain at the site for 19 days. As a demonstration of potential bioengineering applications, thymic epithelial cells (TECs), the primary population of thymic stromal cells that are critical for the development of T-lymphocytes, were mixed with pG_EAK/EAK gel formulated with TEC-specific anti-EpCAM antibodies and injected subcutaneously into athymic nude mice. The injected TECs congregated into functional thymic units in vivo, supporting the development of both CD4+ and CD8+ T cells as well as Foxp3+ regulatory T cells in the mice. In conclusion, pG_EAK/EAK gel can be used to retain IgG locally in vivo, and can be tailored as scaffolds for controlling deposition of molecular and/or cellular therapeutics. STATEMENT OF SIGNIFICANCE: The unique concept of the work centers on the genetic fusion of an Fc-binding domain and a self-assembling domain into a single polypeptide. To our knowledge, such bi-functional peptide has not been reported in the literature. The impact of the work lies in the ability to display IgG antibodies and Fc-fusion proteins of any specificity. The data shown demonstrate the platform can be used to localize IgG in vivo, and can be tailored for controlling deposition of primary thymic epithelial cells (TECs). The results support a biomaterials-based strategy by which TECs can be delivered as functional units to support T-lymphocyte development in vivo. The platform described in the study may serve as an important tool for immune engineering.

Linking (Pyr)1apelin-13 pharmacokinetics to efficacy: Stabilization and measurement of a high clearance peptide in rodents.

Apelin, the endogenous ligand for the APJ receptor, has generated interest due to its beneficial effects on the cardiovascular system. Synthesized as a 77 amino acid preproprotein, apelin is post-translationally cleaved to a series of shorter peptides. Though (Pyr)1apelin-13 represents the major circulating form in plasma, it is highly susceptible to proteolytic degradation and has an extremely short half-life, making it challenging to quantify. Literature reports of apelin levels in rodents have historically been determined with commercial ELISA kits which suffer from a lack of selectivity, recognizing a range of active and inactive isoforms of apelin peptide. (Pyr)1apelin-13 has demonstrated beneficial hemodynamic effects in humans, and we wished to evaluate if similar effects could be measured in pre-clinical models. Despite development of a highly selective LC/MS/MS method, in rodent studies where (Pyr)1apelin-13 was administered exogenously the peptide was not detectable until a detailed stabilization protocol was implemented during blood collection. Further, the inherent high clearance of (Pyr)1apelin-13 required an extended release delivery system to enable chronic dosing. The ability to deliver sustained doses and stabilize (Pyr)1apelin-13 in plasma allowed us to demonstrate for the first time the link between systemic concentration of apelin and its pharmacological effects in animal models.

Progress in three-dimensional printing with growth factors.

Incorporation of growth factors in biomedical constructs can encourage cellular activities necessary for tissue regeneration within an implant system. Three-dimensional printing offers a capacity for spatial dictation and dosage control of incorporated growth factors which promises to minimize complications from the supraphysiologic doses and burst release involved in current growth factor delivery systems. Successful implementation of three-dimensional printing with growth factors requires preservation of the bioactivity of printed growth factors, spatial localization of growth factors within the construct architecture during printing, and controlled release of growth factors after printing. This review describes demonstrated approaches for addressing each of these goals, including direct inclusion of growth factors with the biomaterial during printing, or intermediary encapsulation of growth factors in delivery vehicles such as microparticles or nanoparticles.

Development of photosynthetic sutures for the local delivery of oxygen and recombinant growth factors in wounds.

Surgical sutures represent the gold standard for wound closure, however, their main purpose is still limited to a mechanical function rather than playing a bioactive role. Since oxygen and pro-regenerative growth factors have been broadly described as key players for the healing process, in this study we evaluated the feasibility of generating photosynthetic sutures that, in addition to mechanical fixation, could locally and stably release oxygen and recombinant human growth factors (VEGF, PDGF-BB, or SDF-1α) at the wound site. Here, photosynthetic genetically modified microalgae were seeded in commercially available sutures and their distribution and proliferation capacity was evaluated. Additionally, the mechanical properties of seeded sutures were compared to unseeded controls that showed no significant differences. Oxygen production, as well as recombinant growth factor release was quantified in vitro over time, and confirmed that photosynthetic sutures are indeed a feasible approach for the local delivery of bioactive molecules. Finally, photosynthetic sutures were tested in order to evaluate their resistance to mechanical stress and freezing. Significant stability was observed in both conditions, and the feasibility of their use in the clinical practice was therefore confirmed. Our results suggest that photosynthetic gene therapy could be used to produce a new generation of bioactive sutures with improved healing capacities. STATEMENT OF SIGNIFICANCE: Disruption of the vascular network is intrinsic to trauma and surgery, and consequently, wound healing is characterized by diminished levels of blood perfusion. Among all the blood components, oxygen and pro-regenerative growth factors have been broadly described as key players for the healing process. Therefore, in this study we evaluated the feasibility of generating photosynthetic sutures that, in addition to mechanical fixation, could locally and stably release oxygen and recombinant human growth factors at the wound site. This novel concept has never been explored before for this type of material and represents the first attempt to create a new generation of bioactive sutures with improved regenerative capabilities.

Biofabrication of a novel leukocyte-fibrin-platelet membrane as a cells and growth factors delivery platform for tissue engineering applications.

Autologous platelet-rich hemocomponents have emerged as potential biologic tools for regenerative purpose, but their therapeutic efficacy still remains controversial. This work represents the characterization study of an innovative autologous leukocyte-fibrin-platelet membrane (LFPm), which we prepared according to a novel protocol involving multiple cycles of apheresis. The high content in fibrinogen gave to our hemocomponent the appearance of a manipulable and suturable membrane with high elasticity and deformation capacity. Moreover, being highly enriched with platelets, leukocytes, and monocytes/macrophages, the LFPm sustained the local release of bioactive molecules (platelet derived growth factor, vascular endothelial growth factor, interleukin-10, and tumour necrosis factor alpha). In parallel, the evaluation of stemness potential highlighted also that the LFPm contained cells expressing pluripotency and multipotency markers both at the messenger ribonucleic acid (NANOG, SOX2, THY1, NT5E, and ENG) and surface-protein level (CD44high /CD73+ /CD34+ /CD117+ /CD31+ ). Finally, biodegradation analysis interestingly showed a good stability of the membrane for at least 3 weeks in vitro and 1 week in vivo. In both cases, biodegradation was associated with progressive exposure of fibrin scaffold, loss/migration of cellular elements, and release of growth factors. Overall, collected evidence could shed some light on the regenerative effect that LFPms may exert after the autologous implant on a defect site.

Patient-Specific Bioinks for 3D Bioprinting of Tissue Engineering Scaffolds.

Bioprinting has emerged as a promising tool in tissue engineering and regenerative medicine. Various 3D printing strategies have been developed to enable bioprinting of various biopolymers and hydrogels. However, the incorporation of biological factors has not been well explored. As the importance of personalized medicine is becoming more clear, the need for the development of bioinks containing autologous/patient-specific biological factors for tissue engineering applications becomes more evident. Platelet-rich plasma (PRP) is used as a patient-specific source of autologous growth factors that can be easily incorporated to hydrogels and printed into 3D constructs. PRP contains a cocktail of growth factors enhancing angiogenesis, stem cell recruitment, and tissue regeneration. Here, the development of an alginate-based bioink that can be printed and crosslinked upon implantation through exposure to native calcium ions is reported. This platform can be used for the controlled release of PRP-associated growth factors which may ultimately enhance vascularization and stem cell migration.

Amyloid Fibrils: Versatile Biomaterials for Cell Adhesion and Tissue Engineering Applications.

Extracellular matrices (ECM) play an enormous role in any living system, controlling various factors and eventually fates of cells. ECM regulates cell fate by providing constant exogenous signals altering intracellular signal transduction for diverse pathways including proliferation, migration, differentiation, and apoptosis. Biomaterial scaffolds are designed to mimic the natural extracellular matrix such that the cells could recapitulate natural events alike their natural niche. Therefore, the success of tissue engineering is largely dependent on how one can engineer the natural matrix properties at nanoscale precision. In this aspect, several recent studies have suggested that, as long as amyloid fibrils are not toxic, they can be utilized for cell adhesion and tissue engineering applications due to its ECM mimetic surface topography and ability to mediate active cell adhesion via focal adhesions. Although historically associated with human diseases, amyloids have presently emerged as one of the excellent biomaterials evolved in nature. In this review, we focus on the recent advances of amyloid-based biomaterials for cell adhesion and tissue engineering applications.

Challenges in the local delivery of peptides and proteins for oral mucositis management.

Oral mucositis, a common inflammatory side effect of oncological treatments, is a disorder of the oral mucosa that can cause painful ulcerations, local motor disabilities, and an increased risk of infections. Due to the discomfort it produces and the associated health risks, it can lead to cancer treatment restrains, such as the need for dose reduction, cycle delays or abandonment. Current mucositis management has low efficiency in prevention and treatment. A topical drug application for a local action can be a more effective approach than systemic routes when addressing oral cavity pathologies. Local delivery of growth factors, antibodies, and anti-inflammatory cytokines have shown promising results. However, due to the peptide and protein nature of these novel agents, and the several anatomic, physiological and environmental challenges of the oral cavity, their local action might be limited when using traditional delivering systems. This review is an awareness of the issues and strategies in the local delivery of macromolecules for the management of oral mucositis.

A Systematic Exploration of Macrocyclization in Apelin-13: Impact on Binding, Signaling, Stability, and Cardiovascular Effects.

The apelin receptor generates increasing interest as a potential target across several cardiovascular indications. However, the short half-life of its cognate ligands, the apelin peptides, is a limiting factor for pharmacological use. In this study, we systematically explored each position of apelin-13 to find the best position to cyclize the peptide, with the goal to improve its stability while optimizing its binding affinity and signaling profile. Macrocyclic analogues showed a remarkably higher stability in rat plasma (half-life >3 h versus 24 min for Pyr-apelin-13), accompanied by improved affinity (analogue 15, Ki 0.15 nM and t1/2 6.8 h). Several compounds displayed higher inotropic effects ex vivo in the Langendorff isolated heart model in rats (analogues 13 and 15, maximum response at 0.003 nM versus 0.03 nM of apelin-13). In conclusion, this study provides stable and active compounds to better characterize the pharmacology of the apelinergic system.

Apelin administration improves insulin sensitivity in overweight men during hyperinsulinaemic-euglycaemic clamp.

AIMS: Apelin is a recently identified adipokine known to improve glucose tolerance and insulin sensitivity in murine models. This study was dedicated to the proof of concept that apelin administration also enhances insulin sensitivity in humans. MATERIALS AND METHODS: Healthy overweight men were enrolled in this randomized, double-blind, placebo-controlled, cross-over study that successively considered the efficacy and the tolerance of 2 doses of (pyr1)-Apelin-13. A first group of subjects received 9 nmol/kg (n = 8) of (pyr1)-Apelin-13 and, after examination of safety data, a second group received 30 nmol/kg (n = 8). Each volunteer underwent 2 hyperinsulinaemic-euglycaemic clamps where the basal level of glucose infusion rate (GIR) was measured from the 90th to the 120th minute (level 1). Continuous intravenous administration of apelin or placebo was ongoing for 2 hours and GIR was finally evaluated from the 210th to the 240th minute (level 2). Primary evaluation endpoint was the difference in GIR between level 2 and level 1 (ΔGIR). RESULTS: A slight increase in ΔGIR was observed with the low apelin dose (0.65 ± 0.71 mg/kg/min, P = .055) whereas the highest dose significantly improved insulin sensitivity (0.82 ± 0.71 mg/kg/min, P = .033). Cardiovascular monitoring and safety reports did not reveal any side effect of apelin administration. CONCLUSION: As the first demonstration of the insulin-sensitizing action of apelin in humans, alongside numerous studies in rodents, this trial confirms that the apelin/APJ pathway should be considered as a new target to design alternative therapeutic strategies to control insulin resistance in type 2 diabetic patients.

Acylated apelin-13 amide analogues exhibit enzyme resistance and prolonged insulin releasing, glucose lowering and anorexic properties.

The adipokine, apelin has many biological functions but its activity is curtailed by rapid plasma degradation. Fatty acid derived apelin analogues represent a new and exciting avenue for the treatment of obesity-diabetes. This study explores four novel fatty acid modified apelin-13 analogues, namely, (Lys8GluPAL)apelin-13 amide, pGlu(Lys8GluPAL)apelin-13 amide, Lys8GluPAL(Tyr13)apelin-13 and Lys8GluPAL(Val13)apelin-13. Fatty acid modification extended the half-life of native apelin-13 to >24 h in vitro. pGlu(Lys8GluPAL)apelin-13 amide was the most potent insulinotropic analogue in BRIN-BD11 cells and isolated islets with maximal stimulatory effects of up to 2.7-fold (p < .001). (Lys8GluPAL)apelin-13 amide (1.9-fold) and Lys8GluPAL(Tyr13)apelin-13 (1.7-fold) were less effective, whereas Lys8GluPAL(Val13)apelin-13 had an inhibitory effect on insulin secretion. Similarly, pGlu(Lys8GluPAL)apelin-13 amide was most potent in increasing beta-cell intracellular Ca2+ concentrations (1.8-fold, p < .001) and increasing glucose uptake in 3T3-L1 adipocytes (2.3-fold, p < .01). Persistent biological action was observed with both pGlu(Lys8GluPAL)apelin-13 amide and (Lys8GluPAL)apelin-13 amide significantly reducing blood glucose (39-43%, p < .01) and enhancing insulin secretion (43-56%, p < .001) during glucose tolerance tests in diet-induced obese mice. pGlu(Lys8GluPAL)apelin-13 amide and (Lys8GluPAL)apelin-13 amide also inhibited feeding (28-40%, p < .001), whereas Lys8GluPAL(Val13)apelin-13 increased food intake (8%, p < .05) in mice. These data indicate that novel enzymatically stable analogues of apelin-13 may be suitable for future development as therapeutic agents for obesity-diabetes.

Exosomes derived from human umbilical cord blood mesenchymal stem cells stimulates rejuvenation of human skin.

Human umbilical cord blood-derived mesenchymal stem cells (UCB-MSCs) play an important role in cutaneous wound healing, and recent studies suggested that MSC-derived exosomes activate several signaling pathways, which are conducive in wound healing and cell growth. In this study, we investigated the roles of exosomes that are derived from USC-CM (USC-CM Exos) in cutaneous collagen synthesis and permeation. We found that USC-CM has various growth factors associated with skin rejuvenation. Our in vitro results showed that USC-CM Exos integrate in Human Dermal Fibroblasts (HDFs) and consequently promote cell migration and collagen synthesis of HDFs. Moreover, we evaluated skin permeation of USC-CM Exos by using human skin tissues. Results showed that Exo-Green labeled USC-CM Exos approached the outermost layer of the epidermis after 3 h and gradually approached the epidermis after 18 h. Moreover, increased expressions of Collagen I and Elastin were found after 3 days of treatment on human skin. The results showed that USC-CM Exos is absorbed into human skin, it promotes Collagen I and Elastin synthesis in the skin, which are essential to skin rejuvenation and shows the potential of USC-CM integration with the cosmetics or therapeutics.

An in situ photocrosslinkable platelet rich plasma - Complexed hydrogel glue with growth factor controlled release ability to promote cartilage defect repair.

The repair of articular cartilage injury is a great clinical challenge. Platelet-rich plasma (PRP) has attracted much attention for the repair of articular cartilage injury, because it contains various growth factors that are beneficial for wound repair. However, current administration methods of PRP have many shortcomings, such as unstable biological fixation and burst release of growth factors, all of which complicate its application in the repair of articular cartilage and compromise its therapeutic efficacy. In this study, based on our previously reported photoinduced imine crosslinking (PIC) reaction, we developed an in situ photocrosslinkable PRP hydrogel glue (HNPRP) through adding a photoresponsive hyaluronic acid (HA-NB) which could generate aldehyde groups upon light irradiation and subsequently react with amino groups, into autologous PRP. Our study showed that HNPRP hydrogel glue was cytocompatible and could be conveniently and rapidly prepared in situ, forming a robust hydrogel scaffold. In addition, our results demonstrated that HNPRP hydrogel not only achieved controlled release of growth factors, but also showed strong tissue adhesive ability. Therefore, HNPRP hydrogel was quite suitable for cartilage defect regeneration. Our further in vitro experiment showed that HNPRP hydrogel could promote the proliferation and migration of chondrocytes and bone marrow stem cells (BMSCs). In vivo testing using a rabbit full-thickness cartilage defect model demonstrated that HNPRP hydrogel could achieve integrative hyaline cartilage regeneration and its therapeutic efficacy was better than thrombin activated PRP gel. STATEMENT OF SIGNIFICANCE: In this study, we have developed a photocrosslinkable platelet rich plasma (PRP) - complexed hydrogel glue (HNPRP) for cartilage regeneration. The in situ formed HNPRP hydrogel glue showed not only the controlled release ability of growth factors, but also strong tissue adhesiveness, which could resolve the current problems in clinical application of PRP. Furthermore, HNPRP hydrogel glue could promote integrative hyaline cartilage regeneration, and its reparative efficacy for cartilage defect was better than thrombin activated PRP gel. This study provided not only an effective repair material for cartilage regeneration, but also developed an advanced method for PRP application.

Microparticles to enhance delivery of drugs and growth factors into wound sites.

Microparticles with controlled size and morphology are of significant interest in the field of drug delivery. Although advanced nanoparticles have been the object of a substantial number of reviews, fewer have focused on microparticles, especially for the delivery of drugs and growth factors to the wound site. Microparticles show distinct advantages, including ease of production and characterization, extended release properties, high drug loading and little concern about the toxicity as compared with the nanosized systems. This review presents an introduction to the pathophysiology of wound healing and provides an overview of some of the recent advances in microparticle-based drugs and growth factors delivery to wound sites.

Engineering growth factors for regenerative medicine applications.

Growth factors are important morphogenetic proteins that instruct cell behavior and guide tissue repair and renewal. Although their therapeutic potential holds great promise in regenerative medicine applications, translation of growth factors into clinical treatments has been hindered by limitations including poor protein stability, low recombinant expression yield, and suboptimal efficacy. This review highlights current tools, technologies, and approaches to design integrated and effective growth factor-based therapies for regenerative medicine applications. The first section describes rational and combinatorial protein engineering approaches that have been utilized to improve growth factor stability, expression yield, biodistribution, and serum half-life, or alter their cell trafficking behavior or receptor binding affinity. The second section highlights elegant biomaterial-based systems, inspired by the natural extracellular matrix milieu, that have been developed for effective spatial and temporal delivery of growth factors to cell surface receptors. Although appearing distinct, these two approaches are highly complementary and involve principles of molecular design and engineering to be considered in parallel when developing optimal materials for clinical applications. STATEMENT OF SIGNIFICANCE: Growth factors are promising therapeutic proteins that have the ability to modulate morphogenetic behaviors, including cell survival, proliferation, migration and differentiation. However, the translation of growth factors into clinical therapies has been hindered by properties such as poor protein stability, low recombinant expression yield, and non-physiological delivery, which lead to suboptimal efficacy and adverse side effects. To address these needs, researchers are employing clever molecular and material engineering and design strategies to both improve the intrinsic properties of growth factors and effectively control their delivery into tissue. This review highlights examples of interdisciplinary tools and technologies used to augment the therapeutic potential of growth factors for clinical applications in regenerative medicine.