Shoot Multiplication and Callus Induction of Labisia pumila var. alata as Influenced by Different Plant Growth Regulators Treatments and Its Polyphenolic Activities Compared with the Wild Plant.

This study aims to investigate whether the in vitro-cultured L. pumila var. alata has higher antioxidant activity than its wild plant. An 8-week-old L. pumila var. alata nodal segment and leaf explants were cultured onto Murashige and Skoog (MS) medium supplemented with various cytokinins (zeatin, kinetin, and 6-benzylaminopurine (BAP)) for shoot multiplication and auxins (2,4-dichlorophenoxyacetic acid (2,4-D) and picloram) for callus induction, respectively. The results showed that 2 mg/L zeatin produced the optimal results for shoot and leaf development, and 0.5 mg/L 2,4-D produced the highest callus induction results (60%). After this, 0.5 mg/L 2,4-D was combined with 0.25 mg/L cytokinins and supplemented to the MS medium. The optimal results for callus induction (100%) with yellowish to greenish and compact texture were obtained using 0.5 mg/L 2,4-D combined with 0.25 mg/L zeatin. Leaves obtained from in vitro plantlets and wild plants as well as callus were extracted and analyzed for their antioxidant activities (DPPH and FRAP methods) and polyphenolic properties (total flavonoid and total phenolic content). When compared with leaf extracts of in vitro plantlets and wild plants of L. pumila var. alata, the callus extract displayed significantly higher antioxidant activities and total phenolic and flavonoid content. Hence, callus culture potentially can be adapted for antioxidant and polyphenolic production to satisfy pharmaceutical and nutraceutical needs while conserving wild L. pumila var. alata.

The pesticide picloram affects biomembrane models made with Langmuir monolayers.

Cell membrane models are useful to obtain molecular-level information on the interaction of biologically-relevant molecules such as pesticides whose activity is believed to depend on its effects on the membrane. In this study, we investigated the interaction between the widely used pesticide picloram with Langmuir monolayers of binary and ternary mixtures comprising 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), sphingomyelin (SM) and cholesterol (Chol), which could be taken as representative of ocular membranes in humans. Picloram expanded the molecular area of DOPC/SM and DOPC/SM/Chol monolayers as the pesticide penetrated the hydrophobic region of the mixtures. A clear correlation was also found between the compressibility modulus (Cs-1) and the presence of cholesterol in the ternary monolayer. Data from polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS) confirmed that picloram interacts with both the acyl chains and headgroups. Spectral shifts and band broadening were induced by picloram, particularly for the phosphate and choline groups, probably owing to its H-bonding ability. The effects reported here on the lipid monolayers may be evidence of the possible activity of picloram on mammalian cell membranes, which highlights the importance of strict control of the level of exposure of humans dealing with pesticides.

Disruption of giant unilamellar vesicles mimicking cell membranes induced by the pesticides glyphosate and picloram.

Giant unilamellar vesicles (GUVs) have been one of the most extensively investigated membrane model to study cell membrane-ligand interactions. In this study, we investigated the interaction between glyphosate and picloram with GUVs made with sphingomyelin (SM), cholesterol (CHOL), and dioleoyl-sn-glycerol-3-phosphocholine (DOPC) (DOPC/SM (1:1), DOPC/CHOL/SM (1:1:1)) in a physiological environment using confocal and phase contrast microscopy. At high pesticide concentrations (70 to 90 µM), we generally found the GUVs undergoing a physical such as contouring, elongation, and eventually lose their characteristic spherical shape. In addition, to determine the comparative effect of the pesticides, control experiments were performed using GUVs made with only DOPC and DOPC/SM 1:1. The results show that, at low concentration (0.5 µM), a significant effect was observed during a 30 min incubation time. These findings also suggest that cholesterol may play a significant role in the permeability of the vesicle against the action of the pesticides, which have important biological implications on the lipid composition of the membrane.

Adsorption of picloram on clays nontronite, illite and kaolinite: equilibrium and herbicide-clays surface complexes.

The picloram (PCM) adsorption on nontronite, illite and kaolinite was studied at pH 3, 5 and 7. The adsorption isotherms had well-fitted to Langmuir and Freundlich models equations. The interactions of PCM with the clay mineral surfaces exhibited an anionic profile adsorption, with a decrease in adsorption when the pH increases. The PCM adsorption capacity increases in the following order: kaolinite < illite < nontronite. The X-ray diffraction (XRD) analysis of PCM-clay samples revealed that the picloram molecule does not enter into the clays basal space. The interaction of PCM with clays surface sites through nitrogen of the pyridine ring was confirmed by X-ray photoelectron spectroscopy (XPS). Due to the anionic form of PCM, the adsorption onto the external and edges surface sites of the clay minerals was proposed.

Novel self-assembling conjugates as vectors for agrochemical delivery.

BACKGROUND: Modern agricultural practises rely on surfactant-based spray applications to eliminate weeds in crops. The wide spread and indiscriminate use of surfactants may result in a number of deleterious effects that are not limited to impacts on the crop and surrounding farm eco-system but include effects on human health. To provide a safer alternative to the use of surfactant-based formulations, we have synthesised a novel, self-assembling herbicide conjugate for the delivery of a broad leaf herbicide, picloram. RESULTS: The synthesized self-assembling amphiphile-picloram (SAP) conjugate has three extending arms: a lipophilic lauryl chain, a hydrophilic polyethylene glycol chain and the amphiphobic agrochemical active picloram. We propose that the SAP conjugate maintains its colloidal stability by quickly transitioning between micellar and inverse micellar phases in hydrophilic and lipophilic environments respectively. The SAP conjugate provides the advantage of a phase structure that enables enhanced interaction with the hydrophobic epicuticular wax surface of the leaf. We have investigated the herbicidal efficiency of the SAP conjugate compared against that of commercial picloram formulations using the model plant Arabidopsis thaliana and found that when tested at agriculturally relevant doses between 0.58 and 11.70 mM a dose-dependent herbicidal effect with comparable kill rates was evident. CONCLUSION: Though self-assembling drug carriers are not new to the pharmaceutical industry their use for the delivery of agrochemicals shows great promise but is largely unexplored. We have shown that SAP may be used as an alternative to current surfactant-based agrochemical formulations and has the potential to shift present practises towards a more sustainable approach.

Persistence of picloram in soil with different vegetation managements.

Herbicides with long residual period may increase the risk of environmental contamination. Adequate management of forage can reduce the half-life of the picloram, one of the most herbicides used in weed control. This study aims to determine the half-life of picloram, using high-performance liquid chromatography in a cultivated soil with Brachiaria brizantha trimmed or not. Brachiaria brizantha was cultivated in 60 pots filled with samples of oxisol, and 30 others were kept uncultivated with this forage. This plant was cut off close to the ground, after 60 days of emergency on 30 vessels. Picloram was applied in all of the plots. Soil samples were collected at 2, 16, 30, 44, 58, 72, 86, 120, 150, and 180 days after the application of this herbicide. These samples were air-dried and stored at - 20 °C. Picloram was extracted by HPLC/UV-Vis detector. Half-life of this herbicide was calculated using kinetics models. The mere presence of roots in treatment with signalgrass cutoff did not reduce the concentrations of this herbicide, except when the emergence of new leaves occurred. The absence of B. brizantha cultivation in areas with application of picloram increases the risk of environmental contamination and successive crops due to the half-life of this herbicide. Brachiaria brizantha reduced half-life picloram and environmental risk in pastures. The validation method is suitable for determining picloram in low concentrations in soil.

Developing ionic liquid forms of picloram with reduced negative effects on the aquatic environment.

As a widely used herbicide, picloram has been frequently detected in the aquatic environment due to its high leaching potential and low adsorption by soil. To reduce aquatic environmental risk of this herbicide caused by leaching and runoff, five herbicidal ionic liquids (HILs) based on picloram were prepared by pairing isopropylamine, octylamine, octadecylamine, 1-methylimidazole, 4-methylmorpholine respectively. Their physicochemical properties including water solubility, octanol-water partition coefficient, surface activity, leaching, as well as soil adsorption were compared. The results showed that these properties could be adjusted by appropriate selection of counter cations. The HILs with long alkyl chains in cations had low water solubility and leaching characteristics, good surface tension and lipophilicity, as well as high soil adsorption. Compared with currently used picloram in the forms of potassium salts, HIL3 had more excellent herbicidal activity against broadleaf weeds and may offer a lower use dosage. The HILs based on picloram can reduce its negative effects on the aquatic environment and can be used as a desirable alternative to commercial herbicidal formulations of picloram in future.

The discovery of Arylex™ active and Rinskor™ active: Two novel auxin herbicides.

Multiple classes of commercially important auxin herbicides have been discovered since the 1940s including the aryloxyacetates (2,4-D, MCPA, dichlorprop, mecoprop, triclopyr, and fluroxypyr), the benzoates (dicamba), the quinoline-2-carboxylates (quinclorac and quinmerac), the pyrimidine-4-carboxylates (aminocyclopyrachlor), and the pyridine-2-carboxylates (picloram, clopyralid, and aminopyralid). In the last 10 years, two novel pyridine-2-carboxylate (or picolinate) herbicides were discovered at Dow AgroSciences. This paper will describe the structure activity relationship study that led to the discovery of the 6-aryl-picolinate herbicides Arylex™ active (2005) and Rinskor™ active (2010). While Arylex was developed primarily for use in cereal crops and Rinskor is still in development primarily for use in rice crops, both herbicides will also be utilized in additional crops.

Simultaneous determination of three chloroacetic acids, three herbicides, and 12 anions in water by ion chromatography.

An ion chromatography method was developed for the simultaneous detection of three soluble herbicides (glyphosate, bentazone and picloram), three chlorine disinfection byproducts (monochloroacetic acid, dichloroacetic acid and trichloroacetic acid) and 12 anions in water (Cl(-), Br(-), SO4(2-), CO3(2-), ClO3(-), ClO4(-), BrO3(-), PO4(3-), NO2(-), NO3(-), CH3COO(-) and COO(-)). High linearity (r(2) > 0.996) was observed for all target analytes for each respective concentration range. The limit of detection and limit of quantitation were between 0.21-0.85 and 0.06-25.46 µg/L, respectively. However, the interference effect of Cl(-), NO3(-) , SO4 (2-) and CO3(2-) on some target analytes must be considered during the analysis. Sample pre-treatment by a hydrogen column (H-column) required to reduce the negative effect of CO3(2-). Additionally, sample pre-treatment by a sliver-hydrogen column (Ag-H-column) is required when Cl(-) > 100 mg/L and SO4(2-) < 50 mg/L, and pre-treatment by both a barium column (Ba-column) and an H-column is required when Cl(-) > 100 mg/L and SO4(2-) > 50 mg/L. When Cl(-) > 100 mg/L, SO4(2-) > 50 mg/L and CO3(2-) > 20 mg/L, the sample pre-treatment by either an Ag-H-Ba-column or an Ag-H-column and Ba-column is required to minimize interference.

New insights on the structure of the picloram-montmorillonite surface complexes.

HYPOTHESIS: The environmental mobility and bioavailability of Picloram (PCM) are determined by the amine and carboxylate chemical groups interaction with the soils mineral phases. Clay particles, such as montmorillonite (Mt), and the pH value of the media could play an important role in adsorption processes. Thus, the study of the role of soil components other than organic matter deserves further investigation for a more accurate assessment of the risk of groundwater contamination. EXPERIMENTS: Samples with PCM adsorbed on Mt dispersions were prepared at pH 3-9. Subsequently, the dispersions were separated, washed, centrifuged and stored at room temperature. Picloram (PCM) herbicide interaction with surface groups of montmorillonite (Mt) was studied using XRD, DTA, FTIR and XPS techniques. FINDINGS: The entrance of PCM into the Mt basal space, in two different arrangements, perpendicular and planar, is proposed and the final arrangement depends on PCM concentration. The interaction of PCM with Mt surface sites through the nitrogen of the pyridine ring and carboxylic group of PCM, forming bidentate and bridge inner-sphere complexes was confirmed by FTIR and XPS analysis. The acidity constant of the PCM adsorbed on the Mt surface was calculated.

Synthesis of nitrogen-doped ZnO by sol-gel method: characterization and its application on visible photocatalytic degradation of 2,4-D and picloram herbicides.

In this work, nitrogen-doped ZnO material was synthesized by the sol-gel method using zinc acetate as the precursor and urea as the nitrogen source (15, 20, 25 and 30% wt.). For comparative purposes, bare ZnO was also prepared. The influence of N doping on structural, morphological, optical and photocatalytic properties was investigated. The synthesized catalysts were characterized by XRD, SEM-EDS, diffuse reflectance UV-Vis spectroscopy, BET and XPS analysis. The photocatalytic activity of N-doped ZnO catalysts was evaluated during the degradation of a mixture of herbicides (2,4-D and picloram) under visible radiation ≥400 nm. The photo-absorption wavelength range of the N-doped ZnO samples was shifted to longer wavelength compared to those of the unmodified ZnO. Among different amounts of dopant agent, the 30% N-doped ZnO material showed higher visible-light activity compared with pure ZnO. Several degradation by-products were identified by using HPLC and ESI-MS/MS. The enhancement of visible photocatalytic activity of the N-doped ZnO semiconductor could be mainly due to their capability in reducing the electron-hole pair recombination.

Comparative sorption, desorption and leaching potential of aminocyclopyrachlor and picloram.

Sorption and desorption of aminocyclopyrachlor (6-amino-5-chloro-2-cyclopropylpyrimidine-4-carboxylic acid) were compared to that of the structurally similar herbicide picloram (4-amino-3,5,6-trichloro-2-pyridinecarboxylic acid) in three soils of differing origin and composition to determine if picloram data is representative of aminocyclopyrachlor behavior in soil. Aminocyclopyrachlor and picloram batch sorption data fit the Freundlich equation and was independent of concentration for aminocyclopyrachlor (1/n = 1), but not for picloram (1/n = 0.80-0.90). Freundlich sorption coefficients (K f) for aminocyclopyrachlor were lowest in the eroded and depositional Minnesota soils (0.04 and 0.12 µmol ((1-1/n)) L(1/n) kg(-1)) and the highest in Molokai soil (0.31 µmol ((1-1/n)) L(1/n) kg(-1)). For picloram, K f was lower in the eroded (0.28 µmol ((1-1/n)) L(1/n) kg(-1)) as compared to the depositional Minnesota soil (0.75 µmol ((1-1/n)) L(1/n) kg(-1)). Comparing soil to soil, K f for picloram was consistently higher than those found for aminocyclopyrachlor. Desorption of aminocyclopyrachlor and picloram was hysteretic on all three soils. With regard to the theoretical leaching potential based on groundwater ubiquity score (GUS), leaching potential of both herbicides was considered to be similar. Aminocyclopyrachlor would be ranked as leacher in all three soils if t1/2 was > 12.7 days. To be ranked as non-leacher in all three soils, aminocyclopyrachlor t1/2 would have to be <3.3 days. Calculated half-life that would rank picloram as leacher was calculated to be ∼15.6 d. Using the current information for aminocycloprachlor, or using picloram data as representative of aminocycloprachlor behavior, scientists can now more accurately predict the potential for offsite transport of aminocycloprachlor.

Encapsulation of the herbicide picloram by using polyelectrolyte biopolymers as layer-by-layer materials.

Microcapsules of the herbicide picloram (PLR) were formulated by a layer-by-layer (LbL) self-assembly method using the polyelectrolyte biopolymers of biocompatible chitosan (CS) and the UV-absorbent sodium lignosulfonate (SL) as shell materials. The herbicide PLR was recrystallized and characterized using XRD analysis. The obtained PLR-loaded microcapsules were characterized by using SEM, FTIR, CLSM, and ζ-potential measurements. The herbicide loading and encapsulation efficiency were also analyzed for the PLR-loaded microcapsules. The influence of LbL layer numbers on herbicide release and photodegradation rates was investigated in vitro. The results showed that the release rates and photodegradation rates of PLR in microcapsules decreased with increasing number of CS/SL self-assembly layers. The results demonstrated that polyelectrolyte biopolymer-based LbL multilayer microcapsules can be a promising approach for the controlled release of PLR as well as other pesticides with poor photostability or short half-release time.

Simultaneous determination of aminopyralid, clopyralid, and picloram residues in vegetables and fruits using ultra-performance liquid chromatography/tandem mass spectrometry.

A sensitive and effective method for the simultaneous quantitative determination of aminopyralid, clopyralid, and picloram in vegetables (eggplant, cucumber, and tomato) and fruits (apple and grape) was developed and validated using ultra-performance LC coupled with MS/MS. The three herbicides were successfully separated and independently confirmed in a single run. Different extraction and cleanup methods were used to optimize the pretreatment processes of the residue analysis method. The final method is straightforward and involves extraction with 1% formic acid-acetonitrile, and no complicated cleanup process is needed. Determination of the compounds was achieved within 3.0 min. Respective average recoveries using this method at four concentration levels (0.05, 0.1, 0.5, and 1.0 mg/kg) ranged from 66.5 to 109.4%, with RSDs in the range of 1.1-19.7% (n = 5) for all analytes. The LODs were below 0.010 mg/kg, and the LOQs did not exceed 0.036 mg/kg, which were lower than the maximum residue limits (MRLs) of 0.5-5.0 mg/kg clopyralid in vegetables and fruits samples, as established by the European Union. This study provides a theoretical basis for China to develop MRLs and an analytical method for aminopyralid, clopyralid, and picloram in vegetables and fruits.

A combinatorial TIR1/AFB-Aux/IAA co-receptor system for differential sensing of auxin.

The plant hormone auxin regulates virtually every aspect of plant growth and development. Auxin acts by binding the F-box protein transport inhibitor response 1 (TIR1) and promotes the degradation of the AUXIN/INDOLE-3-ACETIC ACID (Aux/IAA) transcriptional repressors. Here we show that efficient auxin binding requires assembly of an auxin co-receptor complex consisting of TIR1 and an Aux/IAA protein. Heterologous experiments in yeast and quantitative IAA binding assays using purified proteins showed that different combinations of TIR1 and Aux/IAA proteins form co-receptor complexes with a wide range of auxin-binding affinities. Auxin affinity seems to be largely determined by the Aux/IAA. As there are 6 TIR1/AUXIN SIGNALING F-BOX proteins (AFBs) and 29 Aux/IAA proteins in Arabidopsis thaliana, combinatorial interactions may result in many co-receptors with distinct auxin-sensing properties. We also demonstrate that the AFB5-Aux/IAA co-receptor selectively binds the auxinic herbicide picloram. This co-receptor system broadens the effective concentration range of the hormone and may contribute to the complexity of auxin response.

Residue dynamics of clopyralid and picloram in rape plant rapeseed and field soil.

A new method for simultaneous analysis of clopyralid and picloram residues in rape plant, rapeseed and field soil was developed and validated. The residual dynamics and final residues of clopyralid and picloram in rape plant, rapeseed and soil were determined by high performance liquid chromtography-diode array detector (HPLC-DAD) and high performance liquid chromtography-mass spectroscopy detector (HPLC-MSD). The limit of quantification (LOQ) was established as 0.02 mg/kg for soil sample, 0.5 mg/kg for rape and rapeseed sample, respectively. It was shown that recoveries ranged from 71.3%-109.0% for clopyralid, and 84.0%-100.5% for picloram at fortified levels of 0.02-2 mg/kg. From residue trials at two geographical experimental plots in China and laboratory simulated pots, the results showed that the half-lives of clopyralid in rape and soil were 3.66-4.83 and 2.53-5.17 days, respectively, for picloram with half-lives of 5.17-10.73 and 3.45-7.11 days. For tirals applied according to the label recommended, at harvest time the final residues of clopyralid in rapeseed were below 1.82 mg/kg, while the picloram residues could not be detected in rapeseed (

Rapid and complete degradation of the herbicide picloram by Lipomyces kononenkoae.

An enrichment culture approach was used to isolate a pure culture of the yeast Lipomyces kononenkoae, which had the ability to grow on the herbicide picloram. The yeast rapidly and completely degraded 50 microg mL(-1) picloram by 48 h of growth. While L. kononenkoae was found to use both N atoms of picloram as a sole nitrogen source for growth, it failed to mineralize the herbicide or use it as a sole C source. Product analysis done using LC-ESI-MS indicated that biodegradation of picloram by L. kononenkoae proceeds via a didechlorinated, dihydroxylated, pyridinecarboxylic acid derivative. Our results are consistent with the hypothesis that the majority of picloram degradation in the soil is likely due to microbial catabolic processes.

Degradation of picloram by the electro-Fenton process.

The degradation of the picloram, a widely used herbicide, has been undertaken by the electrochemical advanced oxidation process, namely electro-Fenton in aqueous solution. This process generates catalytically hydroxyl radicals that are strong oxidizing reagents for the oxidation of organic substances. Degradation kinetics of picloram was investigated. Kinetic results evidence a pseudo first-order degradation, with a rate constant of reaction between picloram and hydroxyl radicals of (2.73+/-0.08) x 10(9) M(-1) s(-1). The effect of applied current and catalyst concentration on the degradation and mineralization of picloram was also investigated. The optimum applied current and catalyst concentration values for the degradation of picloram was determined as 300 mA and 0.2 mM Fe(3+), respectively. Mineralization of picloram was followed by the total organic carbon (TOC) analysis. At the end of 8h of electrolysis, 95% of the initial TOC was removed. Several degradation products were identified by using HPLC, LC-MS, GC-MS, and IC analysis. The identified by-products allowed to propose a mineralization pathway for the picloram degradation.

Layered double hydroxides as supports for the slow release of acid herbicides.

A Mg/Al layered double hydroxide (LDH) was intercalated with the anionic herbicides 2,4-D, MCPA, and picloram by using three different methodologies: (i) direct synthesis (DS), (ii) regeneration (RE), and (iii) ion exchange (IE). The resulting complexes were characterized and assayed by batch release and column leaching tests, aiming at the controlled release of these herbicides. All the tested LDH-herbicide complexes displayed similar slow herbicide release properties in water, although the IE method seemed to result in complexes with a greater fraction of herbicide in a readily available form. Apparently, the LDH-herbicide complexes released most of the active ingredient present in the complexes at the end of the batch release experiment. This was attributed to the replacement of the intercalated herbicide by carbonate and hydroxyl anions from the aqueous solution. Compared to the free herbicides, the application of the three LDH-herbicide complexes (RE) to soil columns resulted in reduction in the maximum herbicide concentration in leachates and led to the retardation of herbicide leaching through the soil. All LDH-herbicide complexes presented an herbicidal efficacy similar to that of the free (technical) herbicides. Our results indicated the potential applicability of LDHs as supports for the preparation of slow release formulations of acid herbicides such as 2,4-D, MCPA, or picloram.

Impact of data quality and model complexity on prediction of pesticide leaching.

Accurate input data for leaching models are expensive and difficult to obtain which may lead to the use of "general" non-site-specific input data. This study investigated the effect of using different quality data on model outputs. Three models of varying complexity, GLEAMS, LEACHM, and HYDRUS-2D, were used to simulate pesticide leaching at a field trial near Hamilton, New Zealand, on an allophanic silt loam using input data of varying quality. Each model was run for four different pesticides (hexazinone, procymidone, picloram and triclopyr); three different sets of pesticide sorption and degradation parameters (i.e., site optimized, laboratory derived, and sourced from the USDA Pesticide Properties Database); and three different sets of soil physical data of varying quality (i.e., site specific, regional database, and particle size distribution data). We found that the selection of site-optimized pesticide sorption (Koc) and degradation parameters (half-life), compared to the use of more general database derived values, had significantly more impact than the quality of the soil input data used, but interestingly also more impact than the choice of the models. Models run with pesticide sorption and degradation parameters derived from observed solute concentrations data provided simulation outputs with goodness-of-fit values closest to optimum, followed by laboratory-derived parameters, with the USDA parameters providing the least accurate simulations. In general, when using pesticide sorption and degradation parameters optimized from site solute concentrations, the more complex models (LEACHM and HYDRUS-2D) were more accurate. However, when using USDA database derived parameters, all models performed about equally.