Novel brain-targeted nanomicelles for anti-glioma therapy mediated by the ApoE-enriched protein corona in vivo.

BACKGROUND: The interactions between nanoparticles (NPs) and plasma proteins form a protein corona around NPs after entering the biological environment, which provides new biological properties to NPs and mediates their interactions with cells and biological barriers. Given the inevitable interactions, we regard nanoparticle‒protein interactions as a tool for designing protein corona-mediated drug delivery systems. Herein, we demonstrate the successful application of protein corona-mediated brain-targeted nanomicelles in the treatment of glioma, loading them with paclitaxel (PTX), and decorating them with amyloid ß-protein (Aß)-CN peptide (PTX/Aß-CN-PMs). Aß-CN peptide, like the Aß1-42 peptide, specifically binds to the lipid-binding domain of apolipoprotein E (ApoE) in vivo to form the ApoE-enriched protein corona surrounding Aß-CN-PMs (ApoE/PTX/Aß-CN-PMs). The receptor-binding domain of the ApoE then combines with low-density lipoprotein receptor (LDLr) and LDLr-related protein 1 receptor (LRP1r) expressed in the blood-brain barrier and glioma, effectively mediating brain-targeted delivery. METHODS: PTX/Aß-CN-PMs were prepared using a film hydration method with sonication, which was simple and feasible. The specific formation of the ApoE-enriched protein corona around nanoparticles was characterized by Western blotting analysis and LC-MS/MS. The in vitro physicochemical properties and in vivo anti-glioma effects of PTX/Aß-CN-PMs were also well studied. RESULTS: The average size and zeta potential of PTX/Aß-CN-PMs and ApoE/PTX/Aß-CN-PMs were 103.1 nm, 172.3 nm, 7.23 mV, and 0.715 mV, respectively. PTX was efficiently loaded into PTX/Aß-CN-PMs, and the PTX release from rhApoE/PTX/Aß-CN-PMs exhibited a sustained-release pattern in vitro. The formation of the ApoE-enriched protein corona significantly improved the cellular uptake of Aß-CN-PMs on C6 cells and human umbilical vein endothelial cells (HUVECs) and enhanced permeability to the blood-brain tumor barrier in vitro. Meanwhile, PTX/Aß-CN-PMs with ApoE-enriched protein corona had a greater ability to inhibit cell proliferation and induce cell apoptosis than taxol. Importantly, PTX/Aß-CN-PMs exhibited better anti-glioma effects and tissue distribution profile with rapid accumulation in glioma tissues in vivo and prolonged median survival of glioma-bearing mice compared to those associated with PMs without the ApoE protein corona. CONCLUSIONS: The designed PTX/Aß-CN-PMs exhibited significantly enhanced anti-glioma efficacy. Importantly, this study provided a strategy for the rational design of a protein corona-based brain-targeted drug delivery system. More crucially, we utilized the unfavorable side of the protein corona and converted it into an advantage to achieve brain-targeted drug delivery.

Highly Efficient Modular Construction of Functional Drug Delivery Platform Based on Amphiphilic Biodegradable Polymers via Click Chemistry.

Amphiphilic copolymers with pendant functional groups in polyester segments are widely used in nanomedicine. These enriched functionalities are designed to form covalent conjugates with payloads or provide additional stabilization effects for encapsulated drugs. A general method is successfully developed for the efficient preparation of functional biodegradable PEG-polyester copolymers via click chemistry. Firstly, in the presence of mPEG as initiator, Sn(Oct)2-catalyzed ring-opening polymerization of the α-alkynyl functionalized lactone with D,L-lactide or ε-caprolactone afforded linear mPEG-polyesters bearing multiple pendant alkynyl groups. Kinetic studies indicated the formation of random copolymers. Through copper-catalyzed azide-alkyne cycloaddition reaction, various small azido molecules with different functionalities to polyester segments are efficiently grafted. The molecular weights, polydispersities and grafting efficiencies of azido molecules of these copolymers were investigated by NMR and GPC. Secondly, it is demonstrated that the resulting amphiphilic functional copolymers with low CMC values could self-assemble to form nanoparticles in aqueous media. In addition, the in vitro degradation study and cytotoxicity assays indicated the excellent biodegradability and low cytotoxicity of these copolymers. This work provides a general approach toward the preparation of functional PEG-polyester copolymers in a quite efficient way, which may further facilitate the application of functional PEG-polyesters as drug delivery materials.

Formulation and In Vitro Characterization of PLGA/PLGA-PEG Nanoparticles Loaded with Murine Granulocyte-Macrophage Colony-Stimulating Factor.

Granulocyte-macrophage colony-stimulating factor (GM-CSF) has demonstrated notable clinical activity in cancer immunotherapy, but it is limited by systemic toxicities, poor bioavailability, rapid clearance, and instability in vivo. Nanoparticles (NPs) may overcome these limitations and provide a mechanism for passive targeting of tumors. This study aimed to develop GM-CSF-loaded PLGA/PLGA-PEG NPs and evaluate them in vitro as a potential candidate for in vivo administration. NPs were created by a phase-separation technique that did not require toxic/protein-denaturing solvents or harsh agitation techniques and encapsulated GM-CSF in a more stable precipitated form. NP sizes were within 200 nm for enhanced permeability and retention (EPR) effect with negative zeta potentials, spherical morphology, and high entrapment efficiencies. The optimal formulation was identified by sustained release of approximately 70% of loaded GM-CSF over 24 h, alongside an average size of 143 ± 35 nm and entrapment efficiency of 84 ± 5%. These NPs were successfully freeze-dried in 5% (w/v) hydroxypropyl-ß-cyclodextrin for long-term storage and further characterized. Bioactivity of released GM-CSF was determined by observing GM-CSF receptor activation on murine monocytes and remained fully intact. NPs were not cytotoxic to murine bone marrow-derived macrophages (BMDMs) at concentrations up to 1 mg/mL as determined by MTT and trypan blue exclusion assays. Lastly, NP components generated no significant transcription of inflammation-regulating genes from BMDMs compared to IFNγ+LPS "M1" controls. This report lays the preliminary groundwork to validate in vivo studies with GM-CSF-loaded PLGA/PEG-PLGA NPs for tumor immunomodulation. Overall, these data suggest that in vivo delivery will be well tolerated.

Design and In Vitro Evaluation of a Slow-Release Intraocular Implant of Betamethasone.

Posterior eye diseases are a common cause of vision problems in developing countries, which have encouraged the development of new treatment models for these degenerative diseases. Intraocular implants are one of the drug delivery systems to the posterior region of the eye. Using these implants, the blood-eye barrier can be bypassed; the complications caused by repeated in vitro administrations can be eliminated, and smaller amounts of the drug would be used during the treatment process. Meanwhile, biodegradable implants have received more attention due to their biodegradable structure and the lack of need for re-surgery to remove the rest of the system from the eye. The aim of this study is to employ biodegradable implants composed of polyethylene glycol (PEG) and 3-hydroxybutyrate-co-3-hydroxyvalerat (PHBV) to deliver betamethasone to the back of the eye in the treatment of retinopathy. PHBV polymer has been selected as the main polymer with a certain ratio of drug to polymer for fabrication of enamel and different amounts of PEG with three molecular weights used as pore generators to control drug release over a period of time. Based on the analysis of the results of differential scanning calorimetry (DSC) and FTIR spectroscopy, none of the polymers were degraded in the temperature range of the manufacturing process, and among betamethasone derivatives, the best option for implant preparation is the use of its basic form. Drug release studies over a period of three months showed that implants containing PHBV HV2% and PEG 6000 had a more appropriate release profile.

Constructing slow-release formulations of herbicide metribuzin using its co-extrusion with biodegradable polyester poly-ε-caprolactone.

Different technologies to prepare long term pesticide forms include polymer coating, preparing composites and encapsulating pesticides in nanoparticles. A simple and low-cost method was proposed to obtain slow-release formulations by co-extrusion of a pesticide with a biodegradable polymer at a temperature above the melting points of both components. A herbicide metribuzin and low-melting polyester poly-ε-caprolactone were chosen for this work. Formulations containing 10%, 20%, and 40% herbicide were prepared. During 7 days of their exposition in water, it was released from 81% to 96% of initially loaded metribuzin; the highest release was detected for 40%-loaded forms. Biodegradation of the constructs and pesticide release were further studied in the model soil. Degradation rates of the specimens increased with an increase in pesticide content, from 9% to 20% over 14 weeks for the 10%/20%-loaded and the 40%-loaded specimens, respectively. The release of metribuzin reached, respectively, 37-38% and 55%. The herbicide content in soil was lower due to its partial degradation in soil; it reached 23-25% and 33%, respectively, from initially loaded into the polymer matrix. Release kinetics of metribuzin in water as in soil best fitted the First-order model. The used approach is promising for obtaining long-term release formulations for soil applications.

Nerve conduit based on HAP/PDLLA/PRGD for peripheral nerve regeneration with sustained release of valproic acid.

The nerve conduits have been developed for nerve defect repair. However, no artificial conduits have obtained comparable results to autografts to bridge the large gaps. A possible reason for this poor performance may be a lack of sustainable neurotrophic support for axonal regrowth. Previous studies suggested nanocomposite conduits can be used as a carrier for valproic acid (VPA), a common drug that can produce effects similar to the neurotrophic factors. Here, we developed the novel bioabsorbable conduits based on hydroxyapatite/poly d-l-lactic acid (PDLLA)/poly{(lactic acid)-co-[(glycolic acid)-alt-(l-lysine)]} with sustained release of VPA. Firstly, the sustained release of VPA in this conduit was examined by high-performance liquid chromatography. Then Schwann cells were treated with the conduit extracts. The cell metabolic activity and proliferation were assayed by 3-[4,5-dimethyl-2-thiazolyl]-2,5-diphenyl-2-tetrazolium bromide and bromodeoxyuridine staining. A 10-mm segment of rat sciatic nerve was resected and then repaired, respectively, using the VPA conduit (Group A), the PDLLA conduit (Group B), or the autografts (Group C). Nerve conduction velocities (NCVs), compound muscle action potentials (CMAPs), and histological staining were assayed following the surgery. The cell metabolic activity and proliferation were significantly increased (p < .05) by the extracts from VPA-conduit extract compared to others. NCVs and CMAPs were significantly higher in Groups A and C than Group B (p < .05). The nerve density of Groups A and C was higher than Group B. There was no significant difference between Groups A and C. Taken together, this study suggested the sustained-release VPA conduit promoted peripheral nerve regeneration that was comparable to the autografts. It holds potential for future use in nerve regeneration.

pH-bioresponsive poly(ε-caprolactone)-based polymersome for effective drug delivery in cancer and protein glycoxidation prevention.

Artificial nanostructures using polymers to produce polymeric vesicles are inspired by the many intricate structures found in living organisms. Polymersomes are a class of self-assembled vesicles known for their great stability and application in drug delivery. They can be tuned according to their intended use by changing their components and introducing activable block copolymers that transform these polymersomes into smart nanocarriers. In this study, we propose the synthesis of a poly (ethylene oxide)-poly (ε-caprolactone)-based polymersome (PEO-PCL) loaded with GSH as a pH-responsive drug delivery molecule for cancer and protein alteration inhibition. Initially, the nanocarrier was synthesized and characterized by DLS, TEM/SEM microscopy as well as gel permeation chromatography (GPC) and 1H NMR. Their CMC formation, encapsulation efficiency, and pH responsiveness were analyzed. In addition, empty and GSH-loaded PEO-PCL polymersomes were tested for their toxicity and therapeutic effect on normal and cancer cells via an MTT test. Subsequently, protein alteration models (aggregation, glycation, and oxidation) were performed in vitro where the polymersomes were tested. Results showed that other than being non-toxic and able to highly encapsulate and release the GSH in response to acidic conditions, the nanocomposites do not hinder its content's ameliorative effects on cancer cells and protein alterations. This infers that polymeric nanocarriers can be a base for future smart biomedicine applications and theranostics.

Biodegradable Nanoparticles Based on Pseudo-Proteins Show Promise as Carriers for Ophthalmic Drug Delivery.

Purpose: Drug delivery to treat ocular diseases still is a challenge in ophthalmology. One way to achieve drug delivery that is investigated currently is topical administration of drug-loaded polymeric nanoparticles (NPs) that are able to penetrate ocular barriers. The purpose of this study was optimal preparation of NPs made from pseudo-proteins and evaluation of their ability to penetrate ocular tissues. Methods: Biodegradable NPs of various types were prepared by nanoprecipitation of pseudo-protein composed of l-leucine (L), 1,6-hexanediol (6), and sebacic acid (8) (8L6). Arginine-based cationic polyester amides 8R6 and comb-like polyester amide containing lateral PEG-2000 chains along with 8L6 anchoring fragments in the backbones were used to construct positively charged and PEGylated NPs. They were loaded with fluorescein diacetate (FDA) or rhodamine 6G (Rh6G) as fluorescent probes. Suspensions of the NPs were given to cultivated microglial cells and retinal pigment epithelial (RPE) cells as well as topically on eyes of C57BL/6 mice. Penetration of NPs into the eyes was checked by fluorescence analysis. Results: NPs were prepared, and their properties were characterized. Cultured microglial cells and RPE cells took up the NPs. After topical administration, penetration of NPs into the cornea of the eyes was clearly seen. Small amounts of fluorescent dyes were also found in the lens, the retina, and the sclera depending on the type of NPs. Conclusions: The results showed that the new NPs penetrate ocular tissues after topical administration and are internalized by the cells. This raises confidence that the NPs may be useful carriers of therapeutic agents for ocular delivery.

Kidney targeted delivery of asiatic acid using a FITC labeled renal tubular-targeting peptide modified PLGA-PEG system.

Chronic kidney disease (CKD) is one of the leading public health problems worldwide and finally progresses to end-stage renal disease. The therapeutic options of CKD are very limited. Thus, development of drug delivery systems specific-targeting to kidney may offer more options. Here we developed an efficient kidney-targeted drug delivery system using a FITC labeled renal tubular-targeting peptide modified PLGA-PEG nanoparticles and investigated the intrarenal distribution and cell-type binding. We found that the modified nanoparticles with an approximate diameter of 200 nm exhibited the highest binding capacity with HK-2 cells and fluorescence and immunohistochemical analysis showed they mainly localized in renal proximal tubules by passing through the basolateral side. Furthermore, these kidney-specific nanoparticles could significantly enhance the therapeutic effects of asiatic acid, an insoluble triterpenoid compound as drug delivery carriers. In conclusion, these results suggest the potential of the peptide modified PLGA-PEG nanoparticles as kidneytargeted drug delivery system to proximal tubular cells in treatment of CKD.

Enhanced sciatic nerve regeneration by poly-L-lactic acid/multi-wall carbon nanotube neural guidance conduit containing Schwann cells and curcumin encapsulated chitosan nanoparticles in rat.

The main aim of this study was to improve the efficacy of peripheral nerve regeneration by an artificial neural guidance conduit (NGC) as a carrier to transplant allogeneic Schwann cells (SCs) and curcumin encapsulated chitosan nanoparticles (nanocurcumin). The conduit was prepared by poly-L-lactic acid (PLLA) and surface-modified multi-wall carbon nanotubes (mMWCNT) and filled with SCs and nanocurcumin. SCs play an important role in the regeneration of injured peripheral nerve and controlled curcumin release can decrease SCs apoptosis, and enhance the regeneration and functional recovery of injured peripheral nerves. The mechanical properties, contact angle, and cell biocompatibility experiments showed that the optimized concentration of mMWCNT inside PLLA wall of conduits was 0.15 wt%. The drug release experiments showed slower release of curcumin from nanocurcumin samples compared to nanocurcumin encapsulated inside NGC wrapped fibrin gel sample. It was found that simultaneous using of both SCs and curcumin inside NGC had a significant role in sciatic nerve regeneration in vivo. Histological examination revealed a significant increase in the number of axons in injured sciatic nerve following treatment by SCs and nanocurcumin compared to negative control group. Histological evaluation also revealed a significant decrease in the number of vessels in fibrin groups compared to positive control group. The results showed that there was no significant difference between the reaction time and sciatic functional index (SFI) values of rats with injured sciatic nerve treated by NGC/SCs/nanocurcumin sample and autograft sample. In conclusion, our results strongly showed that PLLA/mMWCNT nanofibrous conduit filled with fibrin gel containing SCs and nanocurcumin is a proper strategy for improving nerve regeneration after a nerve transaction in the rat.

UV-stabilized self-assembled amphiphilic triblock terpolymers supramolecular structures with low cytotoxicity as doxorubicin carriers.

Amphiphilic polystyrene-b-poly[(7-(Allyloxy)-2H-chromen-2-one)-co-(2-hydroxyethyl methacrylate)]-b-poly(2-(dimethylamino)ethyl methacrylate) (PS-b-P(AC-co-HEMA)-b-P(DMAEMA)) triblock terpolymers were synthesized by atom transfer radical polymerization (ATRP). PS-b-P(AC-co-HEMA)-b-PDMAEMA triblock terpolymers were characterized using proton nuclear magnetic resonance (1H NMR) and gel permeation chromatography (GPC). The effect of various pH values on solution self-assembly behavior of PS-b-P(AC-co-HEMA)-b-P(DMAEMA) triblock terpolymers was investigated. Field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), fluorescence microscopy, and dynamic light scattering (DLS) were used to observe the size and morphology of the assembled triblock terpolymers. With altering pH value, different morphologies were obtained including spherical micelles, Janus snowman, and spherical Janus as well as cubic-hexagonal structures. UV light was used to stabilize the self-assembled morphologies and FE-SEM results showed that morphology remained unchanged after photo-dimerization. The self-assembled triblock terpolymers before and after photo-crosslinking were loaded with doxorubicin (DOX) and drug release behavior was examined at different conditions. Due to photo-crosslinking of self-assembled terpolymers, cumulative release was decreased. Thus, they might be more controllable drug carriers in drug delivery systems.

PLA-PCL-PEG-PCL-PLA based micelles for improving the ocular permeability of dexamethasone: development, characterization, and in vitro evaluation.

The aim of the present research was to investigate the feasibility of developing polylactide-polycaprolactone-polyethylene glycol-polycaprolactone-polylactide (PLA-PCL-PEG-PCL-PLA) based micelles to improve ocular permeability of dexamethasone (DEX). PLA-PCL-PEG-PCL-PLA copolymers were synthesized by a ring-opening polymerization method. DEX was loaded into the developed copolymers. The DEX-loaded micelles were characterized using transmission electron microscopy (TEM) and dynamic light scattering (DLS) methods. Cytotoxicity of the micelles obtained was investigated on L929 cell line. Cellular uptake was followed by fluorescence microscopy and flow cytometry analyses. The release behavior of DEX from the micelles as well as the drug release kinetics was studied. Corneal permeability was also evaluated using an ex vivo bovine model. The pentablock copolymers were successfully synthesized. The TEM results verified the formation of spherical micelles, the sizes of which was approximately 65 nm. The micelles exhibited suitable compatibility on L929 cells. The release profile showed an initial burst release phase followed by a sustained release phase, the kinetic of which was close to the Weibull's distribution model. The micelles showed higher corneal permeability in comparison to a marketed DEX eye drop. Taken together, the results indicated that the PLA-PCL-PEG-PCL-PLA micelles could be appropriate candidates for the ocular delivery of DEX, and probably other hydrophobic drugs.

Study on preparation and controlled release in vitro of bergenin-amino polylactic acid polymer.

The efficacy of traditional tablets, drop pills and soft capsules of bergenin is far lower than expected. Therefore, bergenin was modified in this paper to connect with amino polylactic acid, a kind of biodegradable material, for chemical immobilization. The bergenin-amino PLA thus obtained was controllable with small molecular weight and excellent thermal stability. Its release in vitro could be extended with the increase in molecular weight. According to tests of biological compatibility and anti-tumor in vitro, bergenin-amino PLA at a proportion of 1 to 100 was characterized by better biological compatibility and lower cytotoxicity than control group at a concentration of 0.4 µ g/m L. The chemical immobilization of bergenin not only provides patients with an excellent way of drug administration but lays a good foundation for sustained drug release.

Resistance of hepatocellular carcinoma to sorafenib can be overcome with co-delivery of PI3K/mTOR inhibitor BEZ235 and sorafenib in nanoparticles.

Background: The combination of BEZ235 with sorafenib (SFB) enhances anti-hepatocellular carcinoma (HCC) efficacy of the two agents. However, pharmacokinetic profiles in vivo and different endocytosis abilities of these two drugs hinder their therapeutic application.Research design and methods: In this work, we developed d-α-tocopheryl polyethylene glycol 1000 succinate - polycaprolactone polymer nanoparticles (NPs) for co-delivery of SFB and BEZ235 (SFB/BEZ235-NPs). Explored the anti-proliferative and pro-apoptotic effects of SFB/BEZ235-NPs through in vitro and in vivo experiments.Results: Stabilized SFB/BEZ235-NPs were prepared with optimized drug ratio, yielding high encapsulation efficiency, low polydispersity, and enhanced cellular internalization in HepG2 cells. Synergistic cytotoxicity and pro-apoptotic ability were documented. In vivo pharmacokinetic results revealed extended circulation and bioavailability of SFB/BEZ235-NPs compared with those of free drugs. SFB/BEZ235-NPs enhanced antitumor effectiveness in SFB-resistant HCC xenograft mouse models.Conclusion: Taken together, the results of this study describe a promising strategy using SFB and BEZ235 in a nanoparticle formulation for treatment of SFB-resistant HCC.

Preparation of mixed micelles carrying folates and stable radicals through PLA stereocomplexation for drug delivery.

Multifunctional mixed micelles possessing targeting folates on the periphery and stable radicals in the core were prepared from the mixture of folate-poly(ethylene glycol)-block-poly(d-lactide) (FA-PEG-b-PDLA) and poly(ethylene glycol) methyl ether-block-poly(l-lactide)- 2,2,6,6-tetramethylpiperidine-1-oxyl (mPEG-b-PLLA-TEMPO). FA-PEG-b-PDLA and mPEG-b-PLLA-TEMPO were prepared by combining ring-opening polymerization (ROP) of lactide with a series of conversion of the end functional groups. The synthesized block copolymers and their intermediates were well characterized by gel permeation chromatography (GPC) and 1H nuclear magnetic resonance (1H NMR) spectroscopy. The mixture of FA-PEG-b-PDLA and mPEG-b-PLLA-TEMPO self-assembled into spherical micelles with the average diameter about 200 nm through PLA stereocomplexation, which were characterized by dynamic light scattering (DLS), transmission electron microscopy (TEM) and differential scanning calorimetry (DSC). The formed micelles were confirmed to emit electron paramagnetic resonance (EPR) signals by EPR spectroscopy. Additionally, the formed micelles exhibited high loading capacity of hydrophobic anticancer drug, controlled in vitro drug release, satisfied biocompatibility and a significantly higher cellular uptake, indicating promising applications in smart drug delivery.

Synthesis and Design of Norfloxacin drug delivery system based on PLA/TiO2 nanocomposites: Antibacterial and antitumor activities.

Biodegradable, biocompatible and non-toxic polymer-based nanoparticles are the novel nanotherapeutic tool which is used for adsorption and encapsulation drugs. Extended release formulation of Norfloxacin antibiotic, chemotherapeutic agent model, drug in the form of encapsulated and loaded poly (lactic acid) nanocomposites-based Titanium dioxide (PLA/TiO2) was developed. Nanocomposites were prepared using different contents (1, 3, 5 wt %) and morphologies of TiO2 (spheres (S), rods (R). The dispersion of TiO2 was aided by ultrasonic technique followed by solution casting method. The morphology, particle size, crystallite size and composition of the nanocomposites were examined by SEM, TEM, XRD and FTIR. The crystallinity and thermal behavior of the nanocomposites were characterized by DSC and TGA. NOR was loaded onto TiO2 nanospheres (NOR@TiO2 (S)) and the optimum conditions for loading was investigated. Pseudo-second order model was the more adequate to represent the kinetic data. The equilibrium data followed Freundlich adsorption isotherm and the adsorption process was exothermic. NOR@TiO2 (S) was encapsulated into PLA and in vitro release behavior of drug was compared with NOR adsorbed into PLA (NOR@PLA) and nanocomposites (NOR@PLA/TiO2) using different pH (6.7, 7.4) media. To study the mechanism of NOR release, first order, Higuchi, Hixon Crowell and Korsmeyer-Peppas models were applied on the experimental results. The cytotoxicity of the loaded nanocomposites using MTT assay was studied against HepG 2, MCF-7, HCT 116, PC-3, Hela, WI-38 and WISH cells. The encapsulated (NOR@ 5S/En PLA) showed the highest cytotoxic efficacy with moderate effect on normal cells. Moreover, the nanocomposites have great potential against Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, Salmonella and Klebsiella pneumonia. NOR@ PLA/TiO2 nanocomposites showed better antibacterial efficacy than NOR encapsulated nanocomposites. The nanocomposites could be effective vehicles for the sustained delivery of toxic anticancer drug.

Synthesis of a biodegradable branched copolymer mPEG-b-PLGA-g-OCol and its pH-sensitive micelle.

An amphiphilic biodegradable branched copolymer, mPEG-b-PLGA-g-OCol, was synthesized by grafting copolymer (methoxy polyethylene glycol)-b-Poly (l,d-lactic-co-glycolic acid) (mPEG-b-PLGA) on oligomeric collagen (OCol), to form a branched structure with mPEG-b-PLGA as side chain and OCol as backbone. mPEG-b-PLGA and mPEG-b-PLGA-g-OCol were both amphipathic and can self-assemble into micelles in aqueous solution. The mPEG-b-PLGA-g-OCol micelles showed pH-sensitive behaviors and the particle size below 100 nm in slightly acidic environment such as tumor tissue milieu interieur to perform passive targeting. Observed by SEM, when the solution pH increased from 5 to 9, the morphology of mPEG-b-PLGA-g-OCol micelles changed from small spheres to larger ones to rings. For biodegradable mPEG-b-PLGA-g-OCol, the micelles will gradually degrade in body. Further, doxorubicin (DOX) was effectively loaded in the micelles with drug loading and encapsulation efficiency of 3.48% and 25.8%, respectively. To evaluate antineoplastic effect of DOX-laden micelles in vitro, MTT test, flow cytometry and CLSM were performed and found that DOX-laden micelles exhibited higher cellular proliferation inhibition against HeLa cells. These features indicated that the mPEG-b-PLGA-g-OCol micelles were potential drug carrier for cancer therapy.

Poly(hydroxybutyrate-co-hydroxyvalerate) microparticles embedded in κ-carrageenan/locust bean gum hydrogel as a dual drug delivery carrier.

A novel composite hydrogel was prepared as a dual drug delivery carrier. Poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) microparticles were prepared to encapsulate simultaneously ketoprofen and mupirocin, as hydrophobic drug models. These microparticles were embedded in a physically crosslinked hydrogel of κ-carrageenan/locust bean gum. This composite hydrogel showed for both drugs a slower release than the obtained release from microparticles and hydrogel separately. The release of both drugs was observed during a period of 7 days at 37 °C. Different kinetic models were analyzed and the results indicated the best fitting to a Higuchi model suggesting that the release was mostly controlled by diffusion. Also, the drug loaded microparticles were spherical with average mean particle size of 1.0 µm, mesoporous, and distributed homogeneously in the hydrogel. The composite hydrogel showed a thermosensitive swelling behavior reaching 183% of swelling ratio at 37 °C. The composite hydrogel showed the elastic component to be higher than the viscous component, indicating characteristics of a strong hydrogel. The biocompatibility was evaluated with in vitro cytotoxicity assays and the results indicated that this composite hydrogel could be considered as a potential biomaterial for dual drug delivery, mainly for wound healing applications.

Synthesis of magnetic gold coated poly (ε-caprolactonediol) based polyurethane/poly(N-isopropylacrylamide)-grafted-chitosan core-shell nanofibers for controlled release of paclitaxel and 5-FU.

The poly (ε-caprolactonediol) based polyurethane (PCL-Diol-b-PU)/poly(N-isopropylacrylamide)-grafted-chitosan (PNIPAAm-g-chitosan) core-shell nanofibers were synthesized via coaxial electrospinning process. Paclitaxel and 5-FU anticancer drugs were incorporated into the core of nanofibers. The nanofibers surface was coated using magnetic gold nanoparticles and the potential of synthesized nanofibers was investigated for the sustained release of paclitaxel and 5-FU toward 4T1 breast cancer cells death in vitro and in vivo. The synthesized magnetic nanoparticles were characterized using SEM, TEM, XRD and DLS analysis. The surface morphology of nanofibers was studied under various applied voltage and different shell flow rates. The paclitaxel and 5-FU release profiles from nanofibers were examined under acidic and physiological pH. The maximum 4T1 cell killing was found to be 78% using magnetic gold coated-nanofibers in the presence of external magnetic field. The SEM images after incubation of nanofibers in 4T1 breast cancer cells indicated the well adhesion of cells on the nanofibers surface. The in vivo studies showed that the tumor volume did not change during 10 days. The minimum increase in tumor volume was obtained using paclitaxel and 5-FU loaded-nanofibers coated by the magnetic gold nanoparticles. The obtained results demonstrated the high therapeutic efficiency of synthesized nanofibrous carrier toward breast cancer treatment.

Polymer Structure-Guided Self-Assisted Preparation of Poly(ester-thioether)-Based Hollow Porous Microspheres and Hierarchically Interconnected Microcages for Drug Release.

Porous polymer microspheres (PPMs) have been widely applied in various biomedical fields. Herein, the self-assisted preparation of poly(ester-thioether)-based porous microspheres and hierarchical microcages, whose pore sizes can be controlled by varying the polymer structures, is reported. Poly(ester-thioether)s with alkyl side chains (carbon atom numbers were 2, 4, and 8) can generate hollow porous microspheres; the longer alkyl chain length, the larger pore size of microspheres. The allyl-modified poly(ester-thioether) (PHBDT-g-C3 ) can form highly open, hierarchically interconnected microcages. A formation mechanism of these PPMs is proposed; the hydrophobic side chains-mediated stabilization of oil droplets dictate the droplet aggregation and following solvent evaporation, which is the key to the formation of PPMs. The hierarchically interconnected microcages of PHBDT-g-C3 are due to the partially crosslinking of polymers. Pore sizes of PPMs can be further tuned by a simple mixing strategy of poly(ester-thioether)s with different pore-forming abilities. The potential application of these PPMs as H2 O2 -responsive vehicles for delivery of hydrophobic (Nile Red) and hydrophilic (doxorubicin hydrochloride) cargos is also investigated. The microspheres with larger pore sizes show faster in vitro drug release. The poly(ester-thioether)-based polymer microspheres can open a new avenue for the design of PPMs and provide a H2 O2 -responsive drug delivery platform.