Triterpene Glycosides from the Far Eastern Sea Cucumber Psolus chitonoides: Chemical Structures and Cytotoxicities of Chitonoidosides E1, F, G, and H.

Four new triterpene disulfated glycosides, chitonoidosides E1 (1), F (2), G (3), and H (4), were isolated from the Far-Eastern sea cucumber Psolus chitonoides and collected near Bering Island (Commander Islands) at depths of 100-150 m. Among them there are two hexaosides (1 and 3), differing from each other by the terminal (sixth) sugar residue, one pentaoside (4) and one tetraoside (2), characterized by a glycoside architecture of oligosaccharide chains with shortened bottom semi-chains, which is uncommon for sea cucumbers. Some additional distinctive structural features inherent in 1-4 were also found: the aglycone of a recently discovered new type, with 18(20)-ether bond and lacking a lactone in chitonoidoside G (3), glycoside 3-O-methylxylose residue in chitonoidoside E1 (1), which is rarely detected in sea cucumbers, and sulfated by uncommon position 4 terminal 3-O-methylglucose in chitonoidosides F (2) and H (4). The hemolytic activities of compounds 1-4 and chitonoidoside E against human erythrocytes and their cytotoxic action against the human cancer cell lines, adenocarcinoma HeLa, colorectal adenocarcinoma DLD-1, and monocytes THP-1, were studied. The glycoside with hexasaccharide chains (1, 3 and chitonoidoside E) were the most active against erythrocytes. A similar tendency was observed for the cytotoxicity against adenocarcinoma HeLa cells, but the demonstrated effects were moderate. The monocyte THP-1 cell line and erythrocytes were comparably sensitive to the action of the glycosides, but the activity of chitonoidosides E and E1 (1) significantly differed from that of 3 in relation to THP-1 cells. A tetraoside with a shortened bottom semi-chain, chitonoidoside F (2), displayed the weakest membranolytic effect in the series.

Persistent polyamorphism in the chiton tooth: From a new biomineral to inks for additive manufacturing.

Engineering structures that bridge between elements with disparate mechanical properties are a significant challenge. Organisms reap synergy by creating complex shapes that are intricately graded. For instance, the wear-resistant cusp of the chiton radula tooth works in concert with progressively softer microarchitectural units as the mollusk grazes on and erodes rock. Herein, we focus on the stylus that connects the ultrahard and stiff tooth head to the flexible radula membrane. Using techniques that are especially suited to probe the rich chemistry of iron at high spatial resolution, in particular synchrotron Mössbauer and X-ray absorption spectroscopy, we find that the upper stylus of Cryptochiton stelleri is in fact a mineralized tissue. Remarkably, the inorganic phase is nano disperse santabarbaraite, an amorphous ferric hydroxyphosphate that has not been observed as a biomineral. The presence of two persistent polyamorphic phases, amorphous ferric phosphate and santabarbaraite, in close proximity, is a unique aspect that demonstrates the level of control over phase transformations in C. stelleri dentition. The stylus is a highly graded material in that its mineral content and mechanical properties vary by a factor of 3 to 8 over distances of a few hundred micrometers, seamlessly bridging between the soft radula and the hard tooth head. The use of amorphous phases that are low in iron and high in water content may be key to increasing the specific strength of the stylus. Finally, we show that we can distill these insights into design criteria for inks for additive manufacturing of highly tunable chitosan-based composites.

The Iron-Responsive Genome of the Chiton Acanthopleura granulata.

Molluscs biomineralize structures that vary in composition, form, and function, prompting questions about the genetic mechanisms responsible for their production and the evolution of these mechanisms. Chitons (Mollusca, Polyplacophora) are a promising system for studies of biomineralization because they build a range of calcified structures including shell plates and spine- or scale-like sclerites. Chitons also harden the calcified teeth of their rasp-like radula with a coat of iron (as magnetite). Here we present the genome of the West Indian fuzzy chiton Acanthopleura granulata, the first from any aculiferan mollusc. The A. granulata genome contains homologs of many genes associated with biomineralization in conchiferan molluscs. We expected chitons to lack genes previously identified from pathways conchiferans use to make biominerals like calcite and nacre because chitons do not use these materials in their shells. Surprisingly, the A. granulata genome has homologs of many of these genes, suggesting that the ancestral mollusc may have had a more diverse biomineralization toolkit than expected. The A. granulata genome has features that may be specialized for iron biomineralization, including a higher proportion of genes regulated directly by iron than other molluscs. A. granulata also produces two isoforms of soma-like ferritin: one is regulated by iron and similar in sequence to the soma-like ferritins of other molluscs, and the other is constitutively translated and is not found in other molluscs. The A. granulata genome is a resource for future studies of molluscan evolution and biomineralization.

Control of chitin nanofiber production by the lipid-producing diatom Cyclotella Sp. through fed-batch addition of dissolved silicon and nitrate in a bubble-column photobioreactor.

Diatoms are single-celled algae that make cell walls of nanopatterned biogenic silica called frustules through metabolic uptake of dissolved silicon and its templated condensation into biosilica. The centric marine diatom Cyclotella sp. also produces intracellular lipids and the valued coproduct chitin, an N-acetyl glucosamine biopolymer that is extruded from selected frustule pores as pure nanofibers. The goal of this study was to develop a nutrient feeding strategy to control the production of chitin nanofibers from Cyclotella with the coproduction of biofuel lipids. A two-stage phototrophic cultivation process was developed where Stage I set the cell suspension to a silicon-starved state under batch operation, and Stage II continuously added silicon and nitrate to the silicon-starved cells to enable one more cell doubling to 4 × 106 cells mL-1 . The silicon delivery rate was set to enable a silicon-limited cell division rate under cumulative delivery of 0.8 mM Si and 1.2 mM nitrate (1.5:1 mol N/mol Si) over a 4- to 14-day addition period. In Stage II, both cell number and chitin production were linear with time. Cell number and the specific chitin production rate increased linearly with increasing silicon delivery rate to achieve cumulative product yields of 13 ± 1 mg chitin/109 cells and 33 ± 3 mg lipid/109 cells. Therefore, chitin production is controlled through cell division, which is externally controlled through silicon delivery. Lipid production was not linearly correlated to silicon delivery and occurred primarily during Stage I, just after the complete co-consumption of both dissolved silicon and nitrate. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:407-415, 2017.

Valve microstructure and phylomineralogy of New Zealand chitons.

The microstructure and mineralogy of chiton valves has been largely ignored in the literature and only described in 29 species to date. Eight species: Acanthochitona zelandica, Notoplax violacea (Family Acanthochitonidae, Suborder Acanthochitonina, Order Chitonida), Chiton glaucus, Onithochiton neglectus, Sypharochiton spelliserpentis, Sypharochiton sinclairi (Family Chitonidae, Suborder, Chitonina, Order Chitonida), Ischnochiton maorianus (Family Ischnochitonidae, Suborder Chitonina, Order Chitonida), and Leptochiton inquinatus (Family Leptochitonidae, Suborder Lepidopleurina, Order Lepidopleurida) were collected from the Otago Peninsula, South Island, New Zealand. The valves of these chitons were analysed with X-ray diffractometry, Raman spectrometry, and Scanning Electron Micrography (SEM) to determine their mineralogy and microstructure. Both the XRD and Raman data show that the valves consisted solely of aragonite. The observed microstructures of the valves were complex, typically composed of four to seven sublayers, and varied among species. The dorsal layer, the tegmentum, of each species was granular and the ventral layer, the articulamentum, was predominately composed of a spherulitic sublayer, a crossed lamellar sublayer, and an acicular sublayer. The chitonids Sypharochiton pelliserpentis and S. sinclairi had the most complex microstructure layering with three crossed lamellar, two spherulitic sublayers, and a ventral acicular sublayer while the acanthochitonids Acanthochitona zelandica and Notoplax violacea as well as the ischnochitonid Ischnochiton maorianus had the simplest structure with one spherulitic, one crossed lamellar sublayer, and a ventral acicular sublayer. Terminal valves were less complex than intermediate valves and tended to be dominated by the crossed lamellar structure. The leptochitonid Leptochiton inquinatus generated a unique crossed lamellar sublayer different from the other analysed chitonids. Acanthochitona zelandica is the only analysed chitonid that utilizes two different crossed lamellar structures. Clearly, many of these properties do not reflect the currently recognized polyplacophoran phylogeny.

Bioinspired synthesis of magnetite nanoparticles.

Magnetite (Fe3O4) is a widespread magnetic iron oxide encountered in many biological and geological systems, and also in many technological applications. The magnetic properties of magnetite crystals depend strongly on the size and shape of its crystals. Hence, engineering magnetite nanoparticles with specific shapes and sizes allows tuning their properties to specific applications in a wide variety of fields, including catalysis, magnetic storage, targeted drug delivery, cancer diagnostics and magnetic resonance imaging (MRI). However, synthesis of magnetite with a specific size, shape and a narrow crystal size distribution is notoriously difficult without using high temperatures and non-aqueous media. Nevertheless, living organisms such as chitons and magnetotactic bacteria are able to form magnetite crystals with well controlled sizes and shapes under ambient conditions and in aqueous media. In these biomineralization processes the organisms use a twofold strategy to control magnetite formation: the mineral is formed from a poorly crystalline precursor phase, and nucleation and growth are controlled through the interaction of the mineral with biomolecular templates and additives. Taking inspiration from this biological strategy is a promising route to achieve control over the kinetics of magnetite crystallization under ambient conditions and in aqueous media. In this review we first summarize the main characteristics of magnetite and what is known about the mechanisms of magnetite biomineralization. We then describe the most common routes to synthesize magnetite and subsequently will introduce recent efforts in bioinspired magnetite synthesis. We describe how the use of poorly ordered, more soluble precursors such as ferrihydrite (FeH) or white rust (Fe(OH)2) can be employed to control the solution supersaturation, setting the conditions for continued growth. Further, we show how the use of various organic additives such as proteins, peptides and polymers allows for either the promotion or inhibition of magnetite nucleation and growth processes. At last we discuss how the formation of magnetite-based organic-inorganic hybrids leads to new functional nanomaterials.

Multifunctionality of chiton biomineralized armor with an integrated visual system.

Nature provides a multitude of examples of multifunctional structural materials in which trade-offs are imposed by conflicting functional requirements. One such example is the biomineralized armor of the chiton Acanthopleura granulata, which incorporates an integrated sensory system that includes hundreds of eyes with aragonite-based lenses. We use optical experiments to demonstrate that these microscopic lenses are able to form images. Light scattering by the polycrystalline lenses is minimized by the use of relatively large, crystallographically aligned grains. Multiscale mechanical testing reveals that as the size, complexity, and functionality of the integrated sensory elements increase, the local mechanical performance of the armor decreases. However, A. granulata has evolved several strategies to compensate for its mechanical vulnerabilities to form a multipurpose system with co-optimized optical and structural functions.

Selective formation of metastable ferrihydrite in the chiton tooth.

Metastable precursors are thought to play a major role in the ability of organisms to create mineralized tissues. Of particular interest are the hard and abrasion-resistant teeth formed by chitons, a class of rock-grazing mollusks. The formation of chiton teeth relies on the precipitation of metastable ferrihydrite (Fh) in an organic scaffold as a precursor to magnetite. In vitro synthesis of Fh under physiological conditions has been challenging. Using a combination of X-ray absorption and electron paramagnetic resonance spectroscopy, we show that, prior to Fh formation in the chiton tooth, iron ions are complexed by the organic matrix. In vitro experiments demonstrate that such complexes facilitate the formation of Fh under physiological conditions. These results indicate that acidic molecules may be integral to controlling Fh formation in the chiton tooth. This biological approach to polymorph selection is not limited to specialized proteins and can be expropriated using simple chemistry.

Microstructure and self-sharpening of the magnetite cap in chiton tooth.

The magnetite cap of chiton tooth (Acanthochiton rubrolineatus) was studied with SEM. Three microstructurally distinct regions were recognized: Region I, close to the anterior surface of the cusp and composed of thick rod microstructure units; Region III, close to the posterior surface and composed of fine fibers; and Region II, sandwiched between Regions I and II and composed of thin sheets. The microstructure units in the three regions constitute a continuous and integrated architecture component. The hardness of Regions I and II was measured to be Hv270 and Hv490, respectively. Based on these microstructure observation and hardness data, the abrasive behavior and microstructural mechanism of self-sharpening of the chiton tooth were discussed in the paper. The self-sharpening was attributed to the combined effect of the hardness and the texture orientation of the microstructure units in Regions I and II.

Animal eyes: defending the coat of mail.

The eyes on the backs of molluscs known as chitons are shadow and motion detectors, the lenses of which are made of birefringent aragonite. These provide a focus both in and out of water.

A chiton uses aragonite lenses to form images.

Hundreds of ocelli are embedded in the dorsal shell plates of certain chitons. These ocelli each contain a pigment layer, retina, and lens, but it is unknown whether they provide chitons with spatial vision. It is also unclear whether chiton lenses are made from proteins, like nearly all biological lenses, or from some other material. Electron probe X-ray microanalysis and X-ray diffraction revealed that the chiton Acanthopleura granulata has the first aragonite lenses ever discovered. We found that these lenses allow A. granulata's ocelli to function as small camera eyes with an angular resolution of about 9°-12°. Animals responded to the sudden appearance of black, overhead circles with an angular size of 9°, but not to equivalent, uniform decreases in the downwelling irradiance. Our behavioral estimates of angular resolution were consistent with estimates derived from focal length and receptor spacing within the A. granulata eye. Behavioral trials further indicated that A. granulata's eyes provide the same angular resolution in both air and water. We propose that one of the two refractive indices of the birefringent chiton lens places a focused image on the retina in air, whereas the other does so in water.

Characterization of biominerals in the radula teeth of the chiton, Acanthopleura hirtosa.

Understanding biomineralization processes provides a route to the formation of novel biomimetic materials with potential applications in fields from medicine to materials engineering. The teeth of chitons (marine molluscs) represent an excellent example of a composite biomineralized structure, comprising variable layers of iron oxide, iron oxyhydroxide and apatite. Previous studies of fully mineralized teeth using X-ray diffraction, Raman spectroscopy and scanning electron microscopy (SEM) have hinted at the underlying microstructure, but have lacked the resolution to provide vital information on fine scale structure, particularly at interfaces. While transmission electron microscopy (TEM) is capable of providing this information, difficulties in producing suitable samples from the hard, complex biocomposite have hindered progress. To overcome this problem we have used focused ion beam (FIB) processing to prepare precisely oriented sections across interfaces in fully mineralized teeth. In particular, the composite structure is found to be more complex than previously reported, with additional phases (goethite and amorphous apatite) and interface detail observed. This combination of FIB processing and TEM analysis has enabled us to investigate the structural and compositional properties of this complex biocomposite at higher resolution than previously reported and has the potential to significantly enhance future studies of biomineralization in these animals.

Ultrastructure of the epithelial cells associated with tooth biomineralization in the chiton Acanthopleura hirtosa.

The cusp epithelium is a specialized branch of the superior epithelium that surrounds the developing teeth of chitons and is responsible for delivering the elements required for the formation of biominerals within the major lateral teeth. These biominerals are deposited within specific regions of the tooth in sequence, making it possible to conduct a row by row examination of cell development in the cusp epithelium as the teeth progress from the unmineralized to the mineralized state. Cusp epithelium from the chiton Acanthopleura hirtosa was prepared using conventional chemical and microwave assisted tissue processing, for observation by light microscopy, conventional transmission electron microscopy (TEM) and energy filtered TEM. The onset of iron mineralization within the teeth, initiated at row 13, is associated with a number of dramatic changes in the ultrastructure of the apical cusp cell epithelium. Specifically, the presence of ferritin containing siderosomes, the position and number of mitochondria, and the structure of the cell microvilli are each linked to aspects of the mineralization process. These changes in tissue development are discussed in context with their influence over the physiological conditions within both the cells and extracellular compartment of the tooth at the onset of iron mineralization.

Charge contrast imaging of biomaterials in a variable pressure scanning electron microscope.

Charge contrast imaging (CCI) is a dynamic phenomenon recently reported in insulating and semiconducting materials imaged with low vacuum or variable pressure scanning electron microscopes (SEM). Data presented in this paper illustrates that CCI can also be applied to biominerals and biological soft-tissues and that useful and unique structural information can be obtained from routine samples. Various resin-embedded samples were considered and example images from several different biomaterials are presented. Due to the diverse nature of samples that appear to exhibit charge contrast, this imaging technique has prospective application in a wide range of biological and biomedical research. This work represents the first application of CCI to biomaterials and in particular, highlights a new method for investigating the formation, structure and growth of biominerals.