RESUMO
Cerium oxide nanoparticles are known for their antibacterial effects resulting from Ce3+ to Ce4+ conversion. Application of such cerium oxide nanoparticles in dentistry has been previously considered but limited due to deterioration of mechanical properties. Hence, this study aimed to examine mesoporous silica (MCM-41) coated with cerium oxide nanoparticles and evaluate the antibacterial effects and mechanical properties when applied to dental composite resin. Cerium oxide nanoparticles were coated on the MCM-41 surface using the sol-gel method by adding cerium oxide nanoparticle precursor to the MCM-41 dispersion. The samples were tested for antibacterial activity against Streptococcus mutans via CFU and MTT assays. The mechanical properties were assessed by flexural strength and depth of cure according to ISO 4049. Data were analyzed using a t-test, one-way ANOVA, and Tukey's post-hoc test (p = 0.05). The experimental group showed significantly increased antibacterial properties compared to the control groups (p < 0.005). The flexural strength exhibited a decreasing trend as the amount of cerium oxide nanoparticle-coated MCM-41 increased. However, the flexural strength and depth of cure values of the silane group met the ISO 4049 standard. Antibacterial properties increased with increasing amounts of cerium oxide nanoparticles. Although the mechanical properties decreased, silane treatment overcame this drawback. Hence, the cerium oxide nanoparticles coated on MCM-41 may be used for dental resin composite.
Assuntos
Antibacterianos , Cério , Resinas Compostas , Nanopartículas , Dióxido de Silício , Streptococcus mutans , Cério/química , Cério/farmacologia , Dióxido de Silício/química , Antibacterianos/farmacologia , Antibacterianos/química , Resinas Compostas/química , Resinas Compostas/farmacologia , Streptococcus mutans/efeitos dos fármacos , Nanopartículas/química , Resinas Acrílicas/química , Teste de Materiais , Poliuretanos/química , Poliuretanos/farmacologia , Resistência à Flexão , PorosidadeRESUMO
Submicron-textured surfaces have been a promising approach to mitigate biofilm development and control microbial infection. However, the use of the single surface texturing approach is still far from ideal for achieving complete control of microbial infections on implanted biomedical devices. The use of a surface topographic modification that might improve the utility of standard antibiotic therapy could alleviate the complications of biofilms on devices. In this study, we characterized the biofilms of Staphylococcus aureus and Pseudomonas aeruginosa on smooth and submicron-textured polyurethane surfaces after 1, 2, 3, and 7 days, and measured the efficacy of common antibiotics against these biofilms. Results show that the submicron-textured surfaces significantly reduced biofilm formation and growth, and that the efficacy of antibiotics against biofilms grown on textured surfaces was improved compared with smooth surfaces. The antibiotic efficacy appears to be related to the degree of biofilm development. At early time points in biofilm formation, antibiotic treatment reveals reasonably good antibiotic efficacy against biofilms on both smooth and textured surfaces, but as biofilms mature, the efficacy of antibiotics drops dramatically on smooth surfaces, with lesser decreases seen for the textured surfaces. The results demonstrate that surface texturing with submicron patterns is able to improve the use of standard antibiotic therapy to treat device-centered biofilms by slowing the development of the biofilm, thereby offering less resistance to antibiotic delivery to the bacteria within the biofilm community.
Assuntos
Antibacterianos , Biofilmes , Pseudomonas aeruginosa , Staphylococcus aureus , Propriedades de Superfície , Biofilmes/efeitos dos fármacos , Biofilmes/crescimento & desenvolvimento , Pseudomonas aeruginosa/efeitos dos fármacos , Pseudomonas aeruginosa/crescimento & desenvolvimento , Staphylococcus aureus/efeitos dos fármacos , Staphylococcus aureus/crescimento & desenvolvimento , Antibacterianos/farmacologia , Antibacterianos/química , Poliuretanos/química , Poliuretanos/farmacologiaRESUMO
Three-dimensional (3D) printing is an emerging tool for creating patient-specific tissue constructs analogous to the native tissue microarchitecture. In this study, anatomically equivalent 3D nerve conduits were developed using thermoplastic polyurethane (TPU) by combining reverse engineering and material extrusion (i.e. fused deposition modeling) technique. Printing parameters were optimized to fabricate nerve-equivalent TPU constructs. The TPU constructs printed with different infill densities supported the adhesion, proliferation, and gene expression of neuronal cells. Subcutaneous implantation of the TPU constructs for three months in rats showed neovascularization with negligible local tissue inflammatory reactions and was classified as a non-irritant biomaterial as per ISO 10993-6. To performin vivoefficacy studies, nerve conduits equivalent to rat's sciatic nerve were fabricated and bridged in a 10 mm sciatic nerve transection model. After four months of implantation, the sensorimotor function and histological assessments revealed that the 3D printed TPU conduits promoted the regeneration in critical-sized peripheral nerve defects equivalent to autografts. This study proved that TPU-based 3D printed nerve guidance conduits can be created to replicate the complicated features of natural nerves that can promote the regeneration of peripheral nerve defects and also show the potential to be extended to several other tissues for regenerative medicine applications.
Assuntos
Regeneração Nervosa , Poliuretanos , Impressão Tridimensional , Nervo Isquiático , Alicerces Teciduais , Animais , Poliuretanos/química , Poliuretanos/farmacologia , Regeneração Nervosa/efeitos dos fármacos , Ratos , Nervo Isquiático/fisiologia , Nervo Isquiático/lesões , Nervo Isquiático/efeitos dos fármacos , Alicerces Teciduais/química , Ratos Sprague-Dawley , Traumatismos dos Nervos Periféricos/terapia , Traumatismos dos Nervos Periféricos/patologia , Masculino , Regeneração Tecidual Guiada/instrumentação , Regeneração Tecidual Guiada/métodos , Engenharia Tecidual/métodos , Materiais Biocompatíveis/química , Materiais Biocompatíveis/farmacologiaRESUMO
Intervertebral disc (IVD) herniation is a leading cause of disability and lower back pain, causing enormous socioeconomic burdens. The standard of care for disc herniation is nucleotomy, which alleviates pain but does not repair the annulus fibrosus (AF) defect nor recover the biomechanical function of the disc. Existing bioadhesives for AF repair are limited by insufficient adhesion and significant mechanical and geometrical mismatch with the AF tissue, resulting in the recurrence of protrusion or detachment of bioadhesives. Here, we report a composite hydrogel sealant constructed from a composite of a three-dimensional (3D)-printed thermoplastic polyurethane (TPU) mesh and tough hydrogel. We tailored the fiber angle and volume fraction of the TPU mesh design to match the angle-ply structure and mechanical properties of native AF. Also, we proposed and tested three types of geometrical design of the composite hydrogel sealant to match the defect shape and size. Our results show that the sealant could mimic native AF in terms of the elastic modulus, flexural modulus, and fracture toughness and form strong adhesion with the human AF tissue. The bovine IVD tests show the effectiveness of the composite hydrogel sealant for AF repair and biomechanics recovery and for preventing herniation with its heightened stiffness and superior adhesion. By harnessing the combined capabilities of 3D printing and bioadhesives, these composite hydrogel sealants demonstrate promising potential for diverse applications in tissue repair and regeneration.
Assuntos
Anel Fibroso , Hidrogéis , Animais , Anel Fibroso/efeitos dos fármacos , Hidrogéis/química , Hidrogéis/farmacologia , Bovinos , Humanos , Impressão Tridimensional , Poliuretanos/química , Poliuretanos/farmacologia , Adesivos Teciduais/farmacologia , Adesivos Teciduais/químicaRESUMO
Inspired by the crucial role of matrix vesicles (MVs), a series of biomimetic vesicles (BVs) fabricated by calcium glycerophosphate (CaGP) modified polyurethane were designed to mediate the mineralization through in situ enzyme activation for bone therapy. In this study, alkaline phosphatase (ALP) was harbored in the porous BVs by adsorption (Ad-BVs) or entrapment (En-BVs). High encapsulation of ALP on En-BVs was effectively self-activating by calcium ions of CaGP-modified PU that specifically hydrolyzed the organophosphorus (CaGP) to inorganic phosphate, thus promoting the formation of the highly oriented bone-like apatite in vitro. Enzyme-catalyzed kinetics confirms the regulation of apatite crystallization by the synergistic action of self-activated ALP and the confined microcompartments of BVs. This leads to a supersaturated microenvironment, with the En-BVs group exhibiting inorganic phosphate (Pi) levels 4.19 times higher and Ca2+ levels 3.67 times higher than those of simulated body fluid (SBF). Of note, the En-BVs group exhibited excellent osteo-inducing differentiation of BMSCs in vitro and the highest maturity with reduced bone loss in rat femoral defect in vivo. This innovative strategy of biomimetic vesicles is expected to provide valuable insights into the enzyme-activated field of bone therapy.
Assuntos
Fosfatase Alcalina , Materiais Biomiméticos , Calcificação Fisiológica , Animais , Ratos , Fosfatase Alcalina/metabolismo , Fosfatase Alcalina/química , Materiais Biomiméticos/química , Materiais Biomiméticos/farmacologia , Calcificação Fisiológica/efeitos dos fármacos , Osteogênese/efeitos dos fármacos , Ratos Sprague-Dawley , Diferenciação Celular/efeitos dos fármacos , Células-Tronco Mesenquimais/citologia , Células-Tronco Mesenquimais/metabolismo , Células-Tronco Mesenquimais/efeitos dos fármacos , Glicerofosfatos/química , Poliuretanos/química , Poliuretanos/farmacologiaRESUMO
The low therapeutic efficacy and potential long-term toxicity of antitumor treatments seriously limit the clinical application of phototherapies. Herein, we develop a degradable phototheranostic nanoplatform for NIR-II fluorescence bioimaging-guided synergistic photothermal (PTT) and photodynamic therapies (PDT) and immune activation to inhibit tumor growth. The phototheranostic nanoplatform (CX@PSS) consists of multidisulfide-containing polyurethane loaded with a photosensitizer CX, which can be specifically degraded in the GSH overexpressed tumor microenvironment (TME) and exhibits good NIR-II fluorescence, photodynamic, and photothermal properties. Under 808 nm light irradiation, CX@PSS exhibits efficient photothermal conversion and ROS generation, which further induces immunogenic cell death (ICD), releasing tumor-associated antigens and activating the immune response. In vitro and in vivo studies confirm the potential of CX@PSS in NIR II FL imaging-guided tumor treatments by synergistic PTT, PDT, and immune activation. This work is expected to provide a new pathway for clinical applications of imaging-guided tumor diagnosis and treatments.
Assuntos
Fotoquimioterapia , Fármacos Fotossensibilizantes , Nanomedicina Teranóstica , Microambiente Tumoral , Microambiente Tumoral/efeitos dos fármacos , Animais , Camundongos , Humanos , Fármacos Fotossensibilizantes/farmacologia , Fármacos Fotossensibilizantes/uso terapêutico , Fármacos Fotossensibilizantes/química , Nanomedicina Teranóstica/métodos , Fotoquimioterapia/métodos , Imagem Óptica/métodos , Raios Infravermelhos , Nanopartículas/química , Nanopartículas/uso terapêutico , Linhagem Celular Tumoral , Neoplasias/diagnóstico por imagem , Neoplasias/imunologia , Neoplasias/terapia , Neoplasias/tratamento farmacológico , Terapia Fototérmica/métodos , Poliuretanos/química , Poliuretanos/farmacologiaRESUMO
Coating metal structures with a protective material is a popular strategy to prevent their deterioration due to corrosion. However, maintaining the barrier properties of coatings after their mechanical damage is challenging. Herein, we prepared multifunctional coatings with self-healing ability to conserve their anticorrosion performance after damage. The coating was formed by blending synthesized redox-responsive copolymers with the ability to release a corrosion inhibitor upon the onset of corrosion with synthesized self-healing polyurethanes containing disulfide bonds. The corrosion rate of steel substrates coated with a blend is approximately 24 times lower than that of steel coated with only self-healing polyurethane. An exceptional healing efficiency, as high as 95%, is obtained after mechanical damage. The antibiofouling property against bacterial and microalgal attachments on coatings is facilitated by the repellent characteristic of fluorinated segments and the biocidal activity of the inhibitor moieties in the copolymer.
Assuntos
Incrustação Biológica , Corrosão , Incrustação Biológica/prevenção & controle , Polímeros/química , Polímeros/farmacologia , Polímeros/síntese química , Propriedades de Superfície , Antibacterianos/farmacologia , Antibacterianos/química , Antibacterianos/síntese química , Poliuretanos/química , Poliuretanos/farmacologia , Poliuretanos/síntese química , Estrutura Molecular , Testes de Sensibilidade Microbiana , Biofilmes/efeitos dos fármacos , Materiais Revestidos Biocompatíveis/química , Materiais Revestidos Biocompatíveis/farmacologia , Materiais Revestidos Biocompatíveis/síntese químicaRESUMO
Conductive biomaterials offer promising solutions to enhance the maturity of cultured cardiomyocytes. While the conventional culture of cardiomyocytes on nonconductive materials leads to more immature characteristics, conductive microenvironments have the potential to support sarcomere development, gap junction formation, and beating of cardiomyocytes in vitro. In this study, we systematically investigated the behaviors of cardiomyocytes on aligned electrospun fibrous membranes composed of elastic and biodegradable polyurethane (PU) doped with varying concentrations of reduced graphene oxide (rGO). Compared to PU and PU-4%rGO membranes, the PU-10%rGO membrane exhibited the highest conductivity, approaching levels close to those of native heart tissue. The PU-rGO membranes retained anisotropic viscoelastic behavior similar to that of the porcine left ventricle and a superior tensile strength. Neonatal rat cardiomyocytes (NRCMs) and human-induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) on the PU-rGO membranes displayed enhanced maturation with cell alignment and enhanced sarcomere structure and gap junction formation with PU-10%rGO having the most improved sarcomere structure and CX-43 presence. hiPSC-CMs on the PU-rGO membranes exhibited a uniform and synchronous beating pattern compared with that on PU membranes. Overall, PU-10%rGO exhibited the best performance for cardiomyocyte maturation. The conductive PU-rGO membranes provide a promising matrix for in vitro cardiomyocyte culture with promoted cell maturation/functionality and the potential for cardiac disease treatment.
Assuntos
Grafite , Células-Tronco Pluripotentes Induzidas , Miócitos Cardíacos , Poliuretanos , Poliuretanos/química , Poliuretanos/farmacologia , Miócitos Cardíacos/efeitos dos fármacos , Miócitos Cardíacos/citologia , Grafite/química , Grafite/farmacologia , Animais , Humanos , Células-Tronco Pluripotentes Induzidas/citologia , Células-Tronco Pluripotentes Induzidas/efeitos dos fármacos , Ratos , Materiais Biocompatíveis/química , Materiais Biocompatíveis/farmacologia , Diferenciação Celular/efeitos dos fármacos , Alicerces Teciduais/química , Células Cultivadas , ElasticidadeRESUMO
Bacterial infection poses a significant impediment in wound healing, necessitating the development of dressings with intrinsic antimicrobial properties. In this study, a multilayered wound dressing (STPU@MTAI2/AM1) was reported, comprising a surface-superhydrophobic treated polyurethane (STPU) sponge scaffold coupled with an antimicrobial hydrogel. A superhydrophobic protective outer layer was established on the hydrophilic PU sponge through the application of fluorinated zinc oxide nanoparticles (F-ZnO NPs), thereby resistance to environmental contamination and bacterial invasion. The adhesive and antimicrobial inner layer was an attached hydrogel (MTAI2/AM1) synthesized through the copolymerization of N-[2-(methacryloyloxy)ethyl]-N, N, N-trimethylammonium iodide and acrylamide, exhibits potent adherence to dermal surfaces and broad-spectrum antimicrobial actions against resilient bacterial strains and biofilm formation. STPU@MTAI2/AM1 maintained breathability and flexibility, ensuring comfort and conformity to the wound site. Biocompatibility of the multilayered dressing was demonstrated through hemocompatibility and cytocompatibility studies. The multilayered wound dressing has demonstrated the ability to promote wound healing when addressing MRSA-infected wounds. The hydrogel layer demonstrates no secondary damage when peeled off compared to commercial polyurethane sponge dressing. The STPU@MTAI2/AM1-treated wounds were nearly completely healed by day 14, with an average wound area of 12.2 ± 4.3 %, significantly lower than other groups. Furthermore, the expression of CD31 was significantly higher in the STPU@MTAI2/AM1 group compared to other groups, promoting angiogenesis in the wound and thereby contributing to wound healing. Therefore, the prepared multilayered wound dressing presents a promising therapeutic candidate for the management of infected wounds. STATEMENT OF SIGNIFICANCE: Healing of chronic wounds requires avoidance of biofouling and bacterial infection. However developing a wound dressing which is both anti-biofouling and antimicrobial is a challenge. A multilayered wound dressing with multifunction was developed. Its outer layer was designed to be superhydrophobic and thus anti-biofouling, and its inner layer was broad-spectrum antimicrobial and could inhibit biofilm formation. The multilayered wound dressing with adhesive property could easily be removed from the wound surface preventing the cause of secondary damage. The multilayered wound dressing has demonstrated good abilities to promote MRSA-infected wound healing and presents a viable treatment for MRSA-infected wound.
Assuntos
Bandagens , Hidrogéis , Interações Hidrofóbicas e Hidrofílicas , Poliuretanos , Poliuretanos/química , Poliuretanos/farmacologia , Hidrogéis/química , Hidrogéis/farmacologia , Animais , Cicatrização/efeitos dos fármacos , Biofilmes/efeitos dos fármacos , Anti-Infecciosos/farmacologia , Anti-Infecciosos/química , Humanos , Camundongos , Staphylococcus aureus Resistente à Meticilina/efeitos dos fármacosRESUMO
Endoscopic surgery is an effective and common clinical practice for chronic sinusitis. Nasal packing materials are applied in nasal surgery to prevent hemorrhage and promote wound healing. In this study, a degradable polyurethane foam dressing is successfully developed as a promising nasal packing material with good biocompatibility and antibacterial capability. Specifically, quaternized chitosan (QCS) serves as the crosslinker instead of polyols to offer polyurethane foam (PUF-QCS) antibacterial capability. The PUF-QCS2.0 % (with 2.0 wt% QCS) exhibits satisfactory liquid absorption capacity (19.4 g/g), high compressive strengths at both wet (14.5 kPa) and dry states (7.7 kPa), and a good degradation rate (8.3 %) within 7 days. Meanwhile, PUF-QCS2.0 % retains long-term antibacterial activity for 7 days and kills 97.3 % of S. aureus and 91.8 % of E. coli within 6 hours in antibacterial testing. Furthermore, PUF-QCS2.0 % demonstrates a positive hemostatic response in the rabbit nasal septum mucosa trauma model by reducing hemostatic time over 50.0 % and decreasing blood loss up to 76.1 % compared to the commercial PVA nasal packing sponge. Importantly, PUF-QCS also exhibits a significant antibacterial activity in nasal cavity. This nasal packing material has advantages in post-surgery bleeding control and infection prevention. STATEMENT OF SIGNIFICANCE: The performance of a nasal packing sponge requires good mechanical properties, fast and high liquid absorption rate, effective degradability and strong antibacterial activity. These features are helpful for improving the postoperative recovery and patient healing. However, integrating these into a single polyurethane foam is a challenge. In this study, quaternized chitosan (QCS) is synthesized and used as a chain extender and antibacterial agent in preparing a degradable polyurethane foam (PUF-QCS) dressing. PUF-QCS undergoes partial degradation and exhibits effective broad-spectrum antibacterial activity in 7 days. The reduction of postoperative bleeding and infection observed in the animal experiment further demonstrates that the PUF-QCS developed here outperforms the existing commercial nasal packing materials.
Assuntos
Antibacterianos , Quitosana , Poliuretanos , Poliuretanos/química , Poliuretanos/farmacologia , Quitosana/química , Quitosana/farmacologia , Coelhos , Animais , Antibacterianos/farmacologia , Antibacterianos/química , Hemostasia/efeitos dos fármacos , Staphylococcus aureus/efeitos dos fármacos , Hemostáticos/química , Hemostáticos/farmacologia , Bandagens , Escherichia coli/efeitos dos fármacos , MasculinoRESUMO
Blood-contact medical devices are indispensable for clinical interventions, yet their susceptibility to thrombosis and bacterial infections poses substantial risks to treatment efficacy and patient well-being. This study introduces a polysulfobetaine/alginate-CuII (SAC) zwitterionic hydrogel coating on polyurethane (PU) surfaces. This approach retains the superhydrophilic and antifouling nature of pSBMA while conferring the antibacterial effects of copper ions. Meanwhile, the copper alginate network intertwines with the polysulfobetaine (pSBMA) network, enhancing its mechanical properties and overcoming inherent weaknesses, thereby improving coating durability. Compared to the substrate, the SAC hydrogel coating significantly reduces thrombus adhesion mass by approximately 81.5% during extracorporeal blood circulation and effectively prevents bacterial biofilm formation even in a high-concentration bacterial milieu over 30 days. Moreover, the results from an isolated blood circulation model in New Zealand white rabbits affirm the impressive anticoagulant efficacy of the SAC hydrogel coating. The findings suggest that this hydrogel coating and its application method hold promise as a solution for blood-contact material surface modification to address thrombosis and bacterial biofilm formation simultaneously.
Assuntos
Biofilmes , Coagulação Sanguínea , Hidrogéis , Animais , Coelhos , Biofilmes/efeitos dos fármacos , Coagulação Sanguínea/efeitos dos fármacos , Hidrogéis/química , Hidrogéis/farmacologia , Materiais Revestidos Biocompatíveis/química , Materiais Revestidos Biocompatíveis/farmacologia , Trombose/prevenção & controle , Alginatos/química , Alginatos/farmacologia , Infecções Bacterianas/prevenção & controle , Infecções Bacterianas/tratamento farmacológico , Poliuretanos/química , Poliuretanos/farmacologia , Betaína/química , Betaína/análogos & derivados , Betaína/farmacologia , Cobre/química , Cobre/farmacologia , Antibacterianos/química , Antibacterianos/farmacologiaRESUMO
Biodegradable polymers with shape memory effects (SMEs) offer promising solutions for short-term medical interventions, facilitating minimally invasive procedures and subsequent degradation without requiring secondary surgeries. However, achieving a good balance among desirable SMEs, mechanical performance, degradation rate, and bioactivities remains a significant challenge. To address this issue, we established a strategy to develop a versatile biodegradable polyurethane (PPDO-PLC) with tunable hierarchical structures via precise chain segment control. Initial copolymerization of l-lactide and ε-caprolactone sets a tunable Tg close to body temperature, followed by block copolymerization with poly(p-dioxanone) to form a hard domain. This yields a uniform microphase-separation morphology, ensuring robust SME and facilitating the development of roughly porous surface structures in alkaline environments. Cell experiments indicate that these rough surfaces significantly enhance cellular activities, such as adhesion, proliferation, and osteogenic differentiation. Our approach provides a methodology for balancing biodegradability, SMEs, three-dimensional (3D) printability, and bioactivity in materials through hierarchical structure regulation.
Assuntos
Poliuretanos , Poliuretanos/química , Poliuretanos/farmacologia , Proliferação de Células/efeitos dos fármacos , Materiais Biocompatíveis/química , Materiais Biocompatíveis/farmacologia , Animais , Porosidade , Adesão Celular/efeitos dos fármacos , Osteogênese/efeitos dos fármacos , Camundongos , Poliésteres/química , Diferenciação Celular/efeitos dos fármacos , Lactonas/química , Lactonas/farmacologia , Humanos , Caproatos/química , Dioxanos/química , PolímerosRESUMO
Elevated levels of ROS, bacterial infection, inflammation, and improper regeneration are the factors that need to be addressed simultaneously for achieving effective wound healing without scar formation. This study focuses on the fabrication of electrospun ROS-responsive selenium-containing polyurethane nanofibers incorporating deferoxamine mesylate (Def), indomethacin (Indo), and gold nanorods (AuNRs) as proangiogenesis, anti-inflammatory, and antibacterial agents for synchronized delivery to a full-thickness wound in vivo. The structure of the fabricated nanofibers was analyzed by various techniques. Toxicity was checked by CCK-8 and hemolytic assays. The efficiency of wound healing in vitro was verified by a transwell assay and cell scratch assay. The wound healing efficiency of the nanofibers was assayed in full-thickness wounds in a rat model. The multifunctional nanofibers had a porous structure, enhanced antioxidation, antibacterial activity, and promoted wound healing. They eradicated TNF-α and IL-6, increased IL-10 expression, and revealed the angiogenic potential by increased expression of HIF-1α, VEGF, and CD31.
Assuntos
Ouro , Nanofibras , Poliuretanos , Espécies Reativas de Oxigênio , Selênio , Cicatrização , Cicatrização/efeitos dos fármacos , Poliuretanos/química , Poliuretanos/farmacologia , Animais , Nanofibras/química , Selênio/química , Selênio/farmacologia , Espécies Reativas de Oxigênio/metabolismo , Ouro/química , Ouro/farmacologia , Ratos , Nanotubos/química , Antibacterianos/farmacologia , Antibacterianos/química , Desferroxamina/farmacologia , Desferroxamina/química , Ratos Sprague-Dawley , Humanos , Indometacina/farmacologia , Masculino , Neovascularização Fisiológica/efeitos dos fármacos , Anti-Inflamatórios/farmacologia , Anti-Inflamatórios/químicaRESUMO
Macrophages can kill bacteria and viruses by releasing free radicals, which provides a possible approach to construct antifouling coatings with dynamic surfaces that release free radicals if the breaking of dynamic covalent bonds is precisely regulated. Herein, inspired by the defensive behavior of macrophages of releasing free radicals to kill bacteria and viruses, a marine antifouling coating composed of polyurethane incorporating dimethylglyoxime (PUx-DMG) is prepared by precise regulation of dynamic oxime-urethane covalent bonds. The obtained alkyl radical (R·) derived from the cleavage of the oxime-urethane bonds manages to effectively suppress the attachment of marine biofouling. Moreover, the intrinsic dynamic surface makes it difficult for biofouling to adhere and ultimately achieves sustainable antifouling property. Notably, the PU50-DMG coating not only presents efficient antibacterial and antialgae properties, but also prevents macroorganisms from settling in the sea for up to 4 months. This provides a pioneer broad-spectrum strategy to explore the marine antifouling coatings.
Assuntos
Antibacterianos , Incrustação Biológica , Macrófagos , Propriedades de Superfície , Incrustação Biológica/prevenção & controle , Macrófagos/efeitos dos fármacos , Macrófagos/metabolismo , Animais , Antibacterianos/farmacologia , Antibacterianos/química , Poliuretanos/química , Poliuretanos/farmacologia , Camundongos , Oximas/química , Oximas/farmacologia , Células RAW 264.7 , Tamanho da Partícula , Testes de Sensibilidade Microbiana , Estrutura MolecularRESUMO
Polyurethane (PU) catheters are commonly used in clinical treatment. However, the hydrophobic nature of the PU catheter surface leads to adhesion or adsorption to platelets, proteins, bacteria, and other molecules when used in human treatment. To achieve a surface with strong hydrophilicity, high stability and excellent biocompatibility, it is necessary to functionalize the PU catheters. In this paper, a coating with antifouling function was constructed on the surface of PU catheters using plasma technology and an amide coupling reaction. A series of characterization methods, including X-ray photoelectron spectroscopy (XPS), water contact angles (WCA), and atomic force microscopy (AFM), were used to prove the successful modification of the polymer coatings. The coatings showed good stability under conditions such as PBS (pH 7.4, 720 h), 75% ethanol (6 h) and 1 wt% SDS (10 min). Additionally, the coatings exhibit excellent hemocompatibility and antibacterial properties. The PU/PEI/PCSB coating has the best anti-fouling performance among them, which means that using the PCSB copolymer has the potential to modify different clinical catheters into highly effective antifouling coatings.
Assuntos
Betaína , Propriedades de Superfície , Humanos , Betaína/química , Betaína/análogos & derivados , Betaína/farmacologia , Poliuretanos/química , Poliuretanos/farmacologia , Antibacterianos/farmacologia , Antibacterianos/química , Antibacterianos/síntese química , Materiais Revestidos Biocompatíveis/química , Materiais Revestidos Biocompatíveis/farmacologia , Incrustação Biológica/prevenção & controle , Staphylococcus aureus/efeitos dos fármacos , Escherichia coli/efeitos dos fármacos , Animais , Teste de Materiais , Polímeros/química , Polímeros/farmacologiaRESUMO
The undesirable and inevitable adhesion of marine organisms on submerged surfaces has seriously affect the environment, economy and society, so emerging and promising strategies for antifouling are required. Here, the novel and environmental strategy of the antibacterial and antialgal materials was proposed for the application of the antifouling coating without releasing harmful substances. The environment-friendly antifouling agent, the capsaicin derivative N-(2,5-dihydroxy-4-acrylamide meth-ylbenzyl)acrylamide (PHABA), was modified to the molecular chain of the polyurethane. The best tensile strength was up to 23.5â¯MPa of PUP-25% and the elongation at break was 415% of PUP-25%. The excellent wear resistance (300 wear cycles) and chemical solution resistance (H2SO4, NaOH, and NaCl solutions) revealed the applicability of the coating. PHABA would migrate to the surface of the polyurethane coating with time and enhanced the antibacterial and antialgal properties of the coating. PUP-25% prevented more than 90% of bacterial and algal adhesion, indicating the potential application of the antifouling coating.
Assuntos
Antibacterianos , Poliuretanos , Propriedades de Superfície , Poliuretanos/química , Poliuretanos/farmacologia , Antibacterianos/farmacologia , Antibacterianos/química , Hidroquinonas/química , Hidroquinonas/farmacologia , Testes de Sensibilidade Microbiana , Aderência Bacteriana/efeitos dos fármacos , Incrustação Biológica/prevenção & controle , Acrilamida/química , Acrilamida/farmacologia , Resistência à TraçãoRESUMO
Diabetic foot ulcers are a serious complication of uncontrolled diabetes, emphasizing the need to develop wound healing strategies that are not only effective but also biocompatible, biodegradable, and safe. We aimed to create biomatrices composed of semi-interpenetrated polymer networks of collagen, polyurethane, and dextran, to enhance the wound healing process. The hydrogels were extensively characterized by various analytical techniques, including analysis of their structure, crystallinity, thermal properties, gelation process, reticulation, degradation, cell proliferation, and healing properties, among others. Semi-interpenetrated hydrogels containing dextran at levels of 10%, 20%, and 30% exhibited porous interconnections between collagen fibers and entrapped dextran granules, with a remarkable crosslinking index of up to 94% promoted by hydrogen bonds. These hydrogels showed significant improvements in mechanical properties, swelling, and resistance to proteolytic and hydrolytic degradation. After 24 h, there was a significant increase in the viability of several cell types, including RAW 264.7 cells, human peripheral blood mononuclear cells, and dermal fibroblasts. In addition, these hydrogels demonstrated an increased release of interleukin-10 and transforming growth factor-beta1 while inhibiting the release of monocyte chemotactic protein-1 and tumor necrosis factor-alpha after 72 h. Furthermore, these hydrogels accelerated the wound healing process in diabetic rats after topical application. Notably, the biomaterial with 20% dextran (D20) facilitated wound closure in only 21 days. These results highlight the potential of the D20 hydrogel, which exhibits physicochemical and biological properties that enhance wound healing by inhibiting inflammation and fibrillogenesis while remaining safe for application to the skin.
Assuntos
Colágeno , Dextranos , Hidrogéis , Inflamação , Poliuretanos , Cicatrização , Hidrogéis/química , Hidrogéis/farmacologia , Animais , Cicatrização/efeitos dos fármacos , Dextranos/química , Dextranos/farmacologia , Poliuretanos/química , Poliuretanos/farmacologia , Camundongos , Humanos , Colágeno/química , Inflamação/patologia , Inflamação/tratamento farmacológico , Células RAW 264.7 , Ratos , MasculinoRESUMO
Despite the rapid development of tissue adhesives, flaws including allergies, poor stability, and indiscriminate double-sided adhesive properties limit their application in the medical field. In this work, Janus polyurethane patches were spontaneously prepared by adjusting the difference in the functional group distribution between the top and bottom sides of the patch during emulsion drying. Consequently, poor adhesion was exhibited on the bottom surface, while the top surface can easily adhere to metals, polymers, glasses, and tissues. The difference in adhesive strength to pork skin between the two surfaces is more than 5 times. The quaternary ammonium salt and hydrophilic components on the surface of the polyurethane patch enable the rapid removal and absorption of water from the tissue surface to achieve wet adhesion. Animal experiments have demonstrated that this multifunctional Janus polyurethane patch can promote skin wound closure and healing of infected wounds. This facile and effective strategy to construct Janus polyurethane patch provides a promising method for the development of functional tissue-adhesives.
Assuntos
Adesivos , Adesivos Teciduais , Animais , Adesivos/farmacologia , Poliuretanos/farmacologia , Cicatrização , Pele , Adesivos Teciduais/farmacologia , Antibacterianos/farmacologia , HidrogéisRESUMO
In pursuit of enhancing bone cell proliferation, this study delves into the fabrication of porous scaffolds through the integration of nanomaterials. Specifically, we present the development of highly conductive chitosan (CS) nanonets on fibro-porous polyurethane (PU) bio-membranes. These nanofibers comprise functionalized multiwall carbon nanotubes (fMWCNTs), well-dispersed superparamagnetic iron oxide (SPIONs), and strontium oxide (SrO2) nanoparticles. The resulting porous scaffold exhibits remarkable interfacial biocompatibility, antibacterial properties, and load-bearing capability. Through meticulous in vitro investigations, the CS-PU/SPIONs/SrO2-fMWCNTs nanofibrous scaffolds have demonstrated a propensity to promote bone cell regeneration. Notably, the integration of these nanomaterials has been found to upregulate crucial bone-related markers, including ALP, ARS, COL-I, RUNX2, and SPP-I. The evaluation of these markers, conducted through quantitative real-time polymerase chain reaction (qRT-PCR) and immunocytochemistry, substantiates the improved cell survival and enhanced osteogenic differentiation facilitated by the integrated nanomaterials. This comprehensive analysis underscores the efficacy of CS-PU/SPIONs/SrO2-fMWCNTs bioscaffolds in promoting MC3T3-E1 cell regeneration within, thereby holding promise for advancements in bone tissue engineering and regenerative medicine.
Assuntos
Quitosana , Nanotubos de Carbono , Engenharia Tecidual , Quitosana/farmacologia , Quitosana/química , Osteogênese , Alicerces Teciduais/química , Poliuretanos/farmacologia , Regeneração Óssea , Antibacterianos/farmacologia , Proliferação de CélulasRESUMO
Recent studies show good osteoinductive properties of polyurethanes modified with polyhedral oligomeric silsesquioxanes (POSS). In this work, three types of POSS; propanediolisobutyl-POSS (PHI-POSS), disilanolisobutyl-POSS (DSI-POSS), and octahydroxybutyl-POSS (OCTA-POSS) were chemically incorporated into linear polyurethane based on an aliphatic isocyanate, hexamethylene diisocyanate (HDI), to obtain new nanohybrid PU-POSS materials. The full conversion of POSS was confirmed by Fourier transform infrared spectroscopy (FTIR-ATR) spectra of the model reactions with pure HDI. The materials obtained were investigated by FTIR, SEM-EDS, and DSC. The DSC studies showed the thermoplasticity of the obtained materials and apparently good recovery. 30-day immersion in SBF (simulated body fluid) revealed an increase in the rate of deposition of hydroxyapatite (HAp) for the highest POSS loadings, resulting in thick layers of hydroxyapatite (~60-40 µm), and the Ca/P ratio 1.67 (even 1.785). The structure and properties of the inorganic layer depend on the type of POSS, the number of hard segments, and those containing POSS, which can be tailored by changing the HDI/poly(tetramethylene glycol) (PTMG) ratio. Furthermore, the obtained composites revealed good biocompatibility, as confirmed by cytotoxicity tests conducted on two cell lines; normal human dermal fibroblasts (NHDF) and primary human osteoblasts (HOB). Adherent cells seeded on the tested materials showed viability even after a 48-h incubation. After this time, the population of viable, and proliferating cells exceeded 90%. Bioimaging studies have shown the fibroblast and osteoblast cells were well attached to the surface of the tested materials.