Development and evaluation of a molecular based protocol for detection and quantification of Cryptosporidium spp. in wastewater.

Infections caused by protozoan parasites are a major public health concern globally. These infections are commonly diagnosed during water-borne outbreaks, necessitating accurate and highly sensitive detection procedures to assure public health protection. Current molecular techniques are challenged by several factors, such as low parasite concentration, inefficient DNA extraction methods, and inhibitors in environmental samples. This study focused on the development and validation of a molecular protocol for DNA extraction, efficient protozoan (oo)cyst recovery and quantification of protozoan parasites from wastewater using droplet digital polymerase chain reaction (ddPCR). Five DNA extraction methods, including commercial kits, custom phenol-chloroform, and in-house modified methods, were evaluated. The efficiency of each method was assessed via spectrophotometric analysis and ddPCR amplification using specific primers. Lastly, the developed protocol was evaluated for the detection and quantification of Cryptosporidium parvum in wastewater from different regions in South Africa. The conventional phenol-chloroform extraction method yielded the highest DNA concentration of 223 (±0.71) ng/µl and detected the highest number of Cryptosporidium parvum (1807 (±0.30) copies/ddPCR reaction) compared to other methods evaluated in this study. Additionally, the phenol-chloroform method demonstrated high sensitivity in extracting DNA from as few as one cyst/L of Cryptosporidium parvum, corresponding to 5.93 copies/ddPCR reaction. It was also observed that analysis of both the filtered supernatant and pellets after centrifugation improves the recovery efficiency of oocysts from wastewater by 10.5%, resulting in a total recovery of 64.1%. This optimized protocol was successfully applied to measure protozoan concentration in wastewater from different regions in South Africa. The improved DNA extraction and quantification method proposed in this study would be effective in monitoring protozoan concentration in the environment, which will help in instituting mitigation measures to reduce water-borne infections.

Synthetic DNA spike-ins (SDSIs) enable sample tracking and detection of inter-sample contamination in SARS-CoV-2 sequencing workflows.

The global spread and continued evolution of SARS-CoV-2 has driven an unprecedented surge in viral genomic surveillance. Amplicon-based sequencing methods provide a sensitive, low-cost and rapid approach but suffer a high potential for contamination, which can undermine laboratory processes and results. This challenge will increase with the expanding global production of sequences across a variety of laboratories for epidemiological and clinical interpretation, as well as for genomic surveillance of emerging diseases in future outbreaks. We present SDSI + AmpSeq, an approach that uses 96 synthetic DNA spike-ins (SDSIs) to track samples and detect inter-sample contamination throughout the sequencing workflow. We apply SDSIs to the ARTIC Consortium's amplicon design, demonstrate their utility and efficiency in a real-time investigation of a suspected hospital cluster of SARS-CoV-2 cases and validate them across 6,676 diagnostic samples at multiple laboratories. We establish that SDSI + AmpSeq provides increased confidence in genomic data by detecting and correcting for relatively common, yet previously unobserved modes of error, including spillover and sample swaps, without impacting genome recovery.

Direct RT-qPCR detection of SARS-CoV-2 RNA from patient nasopharyngeal swabs without an RNA extraction step.

The ongoing COVID-19 pandemic has created an unprecedented need for rapid diagnostic testing. The World Health Organization (WHO) recommends a standard assay that includes an RNA extraction step from a nasopharyngeal (NP) swab followed by reverse transcription-quantitative polymerase chain reaction (RT-qPCR) to detect the purified SARS-CoV-2 RNA. The current global shortage of RNA extraction kits has caused a severe bottleneck to COVID-19 testing. The goal of this study was to determine whether SARS-CoV-2 RNA could be detected from NP samples via a direct RT-qPCR assay that omits the RNA extraction step altogether. The direct RT-qPCR approach correctly identified 92% of a reference set of blinded NP samples (n = 155) demonstrated to be positive for SARS-CoV-2 RNA by traditional clinical diagnostic RT-qPCR that included an RNA extraction. Importantly, the direct method had sufficient sensitivity to reliably detect those patients with viral loads that correlate with the presence of infectious virus. Thus, this strategy has the potential to ease supply choke points to substantially expand COVID-19 testing and screening capacity and should be applicable throughout the world.

Detection of SARS-CoV-2 RNA by multiplex RT-qPCR.

The current quantitative reverse transcription PCR (RT-qPCR) assay recommended for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) testing in the United States requires analysis of 3 genomic targets per sample: 2 viral and 1 host. To simplify testing and reduce the volume of required reagents, we devised a multiplex RT-qPCR assay to detect SARS-CoV-2 in a single reaction. We used existing N1, N2, and RP primer and probe sets by the Centers for Disease Control and Prevention, but substituted fluorophores to allow multiplexing of the assay. The cycle threshold (Ct) values of our multiplex RT-qPCR were comparable to those obtained by the single assay adapted for research purposes. Low copy numbers (≥500 copies/reaction) of SARS-CoV-2 RNA were consistently detected by the multiplex RT-qPCR. Our novel multiplex RT-qPCR improves upon current single diagnostics by saving reagents, costs, time, and labor.

Disentangling primer interactions improves SARS-CoV-2 genome sequencing by multiplex tiling PCR.

Since December 2019, the coronavirus disease 2019 (COVID-19) caused by a novel coronavirus SARS-CoV-2 has rapidly spread to almost every nation in the world. Soon after the pandemic was recognized by epidemiologists, a group of biologists comprising the ARTIC Network, has devised a multiplexed polymerase chain reaction (PCR) protocol and primer set for targeted whole-genome amplification of SARS-CoV-2. The ARTIC primer set amplifies 98 amplicons, which are separated only in two PCRs, across a nearly entire viral genome. The original primer set and protocol showed a fairly small amplification bias when clinical samples with relatively high viral loads were used. However, as sample's viral load become low, rapid decrease in abundances of several amplicons were seen. In this report, we will show that dimer formations between some primers are the major cause of coverage bias in the multiplex PCR. Based on this, we propose 12 alternative primers in total in the ARTIC primer set that were predicted to be involved in 14 primer interactions. The resulting primer set, version N1 (NIID-1), exhibits improved overall coverage compared to the ARTIC Network's original (V1) and modified (V3) primer set.

Evaluation of the Ion AmpliSeq SARS-CoV-2 Research Panel by Massive Parallel Sequencing.

Deep knowledge of the genetic features of SARS-CoV-2 is essential to track the ongoing pandemic through different geographical areas and to design and develop early diagnostic procedures, therapeutic strategies, public health interventions, and vaccines. We describe protocols and first results of the Ion AmpliSeq™ SARS-CoV-2 Research Panel by a massively parallel sequencing (MPS) assay. The panel allows for targeted sequencing by overlapping amplicons, thereby providing specific, accurate, and high throughput analysis. A modified reverse transcription reaction, which consists of the use of a SARS-CoV-2 specific primers pool from the Ion AmpliSeq SARS-CoV-2 Research Panel, was assessed in order to promote viral RNA specific reverse transcription. The aim of this study was to evaluate the effectiveness of the Ion AmpliSeq™ SARS-CoV-2 Research Panel in sequencing the entire viral genome in different samples. SARS-CoV-2 sequence data were obtained from ten viral isolates and one nasopharyngeal swab from different patients. The ten isolate samples amplified with 12 PCR cycles displayed high mean depth values compared to those of the two isolates amplified with 20 PCR cycles. High mean depth values were also obtained for the nasopharyngeal swab processed by use of a target-specific reverse transcription. The relative depth of coverage (rDoC) analysis showed that when 12 PCR cycles were used, all target regions were amplified with high sequencing coverage, while in libraries amplified at 20 cycles, a poor uniformity of amplification, with absent or low coverage of many target regions, was observed. Our results show that the Ion AmpliSeq SARS-CoV-2 Research Panel can achieve rapid and high throughput SARS-CoV-2 whole genome sequencing from 10 ng of DNA-free viral RNA from isolates and from 1 ng of DNA-free viral RNA from a nasopharyngeal swab using 12 PCR cycles for library amplification. The modified RT-PCR protocol yielded superior results on the nasopharyngeal swab compared to the reverse transcription reaction set up according to the manufacturer's instructions.

Public-transcriptome-database-assisted selection and validation of reliable reference genes for qRT-PCR in rice.

Accurate quantitative reverse transcription PCR (qRT-PCR) requires reliable reference genes whose expression does not vary in different tissues and developmental stages. However, few reliable reference genes are available for qRT-PCR in rice (Oryza sativa). Here, we established an effective strategy for identifying novel reference genes (NRGs) for reliable normalization of qRT-PCR data in various rice organs and developmental stages. We selected candidate NRGs using the Information Commons for Rice Database and confirmed their expression in Rice Expression Profile Database (RiceXPro) data. Genes with low variation (<2.5 cycle quantification) across tissues and developmental stages, and little fluctuation in expression in heatmaps from RiceXPro data were considered stable NRGs. To validate this strategy, we selected 11 candidate NRGs and calculated their expression stability in different spatio-temporal conditions using five programs, and compared these genes with five established reference genes (ERGs). Only one of the ERGs (UBQ5) was reliable and 10 of the candidate NRGs were more stable than the four remaining ERGs. Therefore, public transcriptomic databases are useful for identifying NRGs. We selected two NRGs, UFC1 (Homolog of UFM1-Conjugating Enzyme 1) and FhaB (Homolog of Adhesin FhaB) for qRT-PCR analysis in rice; their homologs might be suitable for other monocot plants.

Golden Mutagenesis: An efficient multi-site-saturation mutagenesis approach by Golden Gate cloning with automated primer design.

Site-directed methods for the generation of genetic diversity are essential tools in the field of directed enzyme evolution. The Golden Gate cloning technique has been proven to be an efficient tool for a variety of cloning setups. The utilization of restriction enzymes which cut outside of their recognition domain allows the assembly of multiple gene fragments obtained by PCR amplification without altering the open reading frame of the reconstituted gene. We have developed a protocol, termed Golden Mutagenesis that allows the rapid, straightforward, reliable and inexpensive construction of mutagenesis libraries. One to five amino acid positions within a coding sequence could be altered simultaneously using a protocol which can be performed within one day. To facilitate the implementation of this technique, a software library and web application for automated primer design and for the graphical evaluation of the randomization success based on the sequencing results was developed. This allows facile primer design and application of Golden Mutagenesis also for laboratories, which are not specialized in molecular biology.

Development of Penicillium italicum-Specific Primers for Rapid Detection among Fungal Isolates in Citrus.

Blue mold in citrus is caused by Penicillium italicum. In this study, the P. italicum-specific primers were developed for rapid detection based on the conserved genes RPB1 and RPB2 among Penicillium genomes. The two primer pairs RPB1-a and RPB1-b proved to be specific to detect P. italicum. The PCR assay among 39 fungal isolates and the colonial, pathogenic morphologies and molecular methods validated the specificity and reliability of these two primer pairs. This report provided a method and P. italicum-specific primers, which might greatly contribute to citrus postharvest industry.

MFEprimer-3.0: quality control for PCR primers.

Quality control (QC) for lab-designed primers is crucial for the success of a polymerase chain reaction (PCR). Here, we present MFEprimer-3.0, a functional primer quality control program for checking non-specific amplicons, dimers, hairpins and other parameters. The new features of the current version include: (i) more sensitive binding site search using the updated k-mer algorithm that allows mismatches within the k-mer, except for the first base at the 3' end. The binding sites of each primer with a stable 3' end are listed in the output; (ii) new algorithms for rapidly identifying self-dimers, cross-dimers and hairpins; (iii) the command-line version, which has an added option of JSON output to enhance the versatility of MFEprimer by acting as a QC step in the 'primer design → quality control → redesign' pipeline; (iv) a function for checking whether the binding sites contain single nucleotide polymorphisms (SNPs), which will affect the consistency of binding efficiency among different samples. In summary, MFEprimer-3.0 is updated with the well-tested PCR primer QC program and it can be integrated into various PCR primer design applications as a QC module. The MFEprimer-3.0 server is freely accessible without any login requirement at: https://mfeprimer3.igenetech.com/ and https://www.mfeprimer.com/. The source code for the command-line version is available upon request.

An evaluation of primers for detecting denitrifiers via their functional genes.

Microbial populations provide nitrogen cycling ecosystem services at the nexus of agriculture, environmental quality and climate change. Denitrification, in particular, impacts socio-environmental systems in both positive and negative ways, through reduction of aquatic and atmospheric nitrogen pollution, but also reduction of soil fertility and production of greenhouse gases. However, denitrification rates are quite variable in time and space, and therefore difficult to model. Microbial ecology is working to improve the predictive ecology of denitrifiers by quantifying and describing the diversity of microbial functional groups. However, metagenomic sequencing has revealed previously undescribed diversity within these functional groups, and highlighted a need to reevaluate coverage of existing DNA primers for denitrification functional genes. We provide here a comprehensive in silico evaluation of primer sets that target diagnostic genes in the denitrification pathway. This analysis makes use of current DNA sequence data available for each functional gene. It contributes a comparative analysis of the strengths and limitations of each primer set for describing denitrifier functional groups. This analysis identifies genes for which development of new tools is needed, and aids in interpretation of existing datasets, both of which will facilitate application of molecular methods to further develop the predictive ecology of denitrifiers.

Barcoding the Neotropical freshwater fish fauna using a new pair of universal COI primers with a discussion of primer dimers and M13 primer tails.

Designing primers for DNA barcoding is a significant challenge for the rich Neotropical fish fauna, which is comprised of ∼6000 species. Previously, researchers required multiple pairs of PCR primers or primer cocktails to obtain standard COI (i.e., mitochondrial cytochrome c oxidase subunit I) barcode sequences from assemblages of freshwater fish in this region. To simplify DNA barcoding and metabarcoding studies of Neotropical freshwater fish, we present a new pair of COI primers, which have yielded high quality barcodes across six teleost orders-Characiformes, Cichliformes, Cyprinodontiformes, Gymnotiformes, Siluriformes, and Synbranchiformes-native to South America. Following previous fish barcoding studies, we also tailed our primers with M13 forward and reverse primers to facilitate the DNA sequencing process. Although this practice generates primer dimers, we obtained complete and high quality COI barcode sequences for all samples. We discuss the problem of primer dimers and suggest strategies for neutralizing their influence on data quality.

Metataxonomic comparison between internal transcribed spacer and 26S ribosomal large subunit (LSU) rDNA gene.

Next-generation sequencing has been used to strengthen knowledge about taxonomic diversity and ecology of fungi within food ecosystems. However, primer amplification and identification bias could edge our understanding into the fungal ecology. The aim of this study is to compare the performance of two primer pairs over two nuclear ribosomal RNA (rRNA) regions of the fungal kingdom, namely the ITS2 and 26S regions. Fermented cocoa beans were employed as biological material and the fungal ecology during fermentation was studied using amplicon-based sequencing tools, making use of a manually curated 26S database constructed in this study, and validated with SILVA's database. To explore potential biases introduced by PCR amplification of fungal communities, a mock community of known composition was prepared and tested. The relative abundances observed for ITS2 suggest that species with longer amplification fragments are underestimated and concurrently species that render shorter amplification fragments are overestimated. However, this correlation between amplicon length and estimation is not valid for all the species analysed. Variability in the amplification lengths contributed to the preferential amplification phenomenon. DNA extracted from twenty fermented cocoa bean samples were used to assess the performance of the two target regions. Overall, the metataxonomic data set recovered similar taxonomic composition and provided consistent results in OTU richness among biological samples. However, 26S region provided higher alpha diversity index and greater fungal rRNA taxonomic depth and robustness results compared with ITS2. Based on the results of this study we suggest the use of the 26S region for targeting fungi. Furthermore, this study showed the efficacy of the manually curated reference database optimized for annotation of mycobiota by using the 26S as a gene target.

Optimizing PCR primers targeting the bacterial 16S ribosomal RNA gene.

BACKGROUND: Targeted amplicon sequencing of the 16S ribosomal RNA gene is one of the key tools for studying microbial diversity. The accuracy of this approach strongly depends on the choice of primer pairs and, in particular, on the balance between efficiency, specificity and sensitivity in the amplification of the different bacterial 16S sequences contained in a sample. There is thus the need for computational methods to design optimal bacterial 16S primers able to take into account the knowledge provided by the new sequencing technologies. RESULTS: We propose here a computational method for optimizing the choice of primer sets, based on multi-objective optimization, which simultaneously: 1) maximizes efficiency and specificity of target amplification; 2) maximizes the number of different bacterial 16S sequences matched by at least one primer; 3) minimizes the differences in the number of primers matching each bacterial 16S sequence. Our algorithm can be applied to any desired amplicon length without affecting computational performance. The source code of the developed algorithm is released as the mopo16S software tool (Multi-Objective Primer Optimization for 16S experiments) under the GNU General Public License and is available at http://sysbiobig.dei.unipd.it/?q=Software#mopo16S . CONCLUSIONS: Results show that our strategy is able to find better primer pairs than the ones available in the literature according to all three optimization criteria. We also experimentally validated three of the primer pairs identified by our method on multiple bacterial species, belonging to different genera and phyla. Results confirm the predicted efficiency and the ability to maximize the number of different bacterial 16S sequences matched by primers.

An internationally standardized species identification test for use on suspected seized rhinoceros horn in the illegal wildlife trade.

Rhinoceros (rhino) numbers have dwindled substantially over the past century. As a result, three of the five species are now considered to be critically endangered, one species is vulnerable and one species is near-threatened. Poaching has increased dramatically over the past decade due to a growing demand for rhino horn products, primarily in Asia. Improved wildlife forensic techniques, such as validated tests for species identification of seized horns, are critical to aid current enforcement and prosecution efforts and provide a deterrent to future rhino horn trafficking. Here, we present an internationally standardized species identification test based on a 230 base pair cytochrome-b region. This test improves on previous nested PCR protocols and can be used for the discrimination of samples with <20pg of template DNA, thus suitable for DNA extracted from horn products. The assay was designed to amplify water buffalo samples, a common 'rhino horn' substitute, but to exclude human DNA, a common contaminant. Phylogenetic analyses using this partial cytochrome-b region resolved the five extant rhino species. Testing successfully returned a sequence and correct identification for all of the known rhino horn samples and vouchered rhino samples from museum and zoo collections, and provided species level identification for 47 out of 52 unknown samples from seizures. Validation and standardization was carried out across five different laboratories, in four different countries, demonstrating it to be an effective and reproducible test, robust to inter laboratory variation in equipment and consumables (such as PCR reagents). This is one of the first species identification tests to be internationally standardized to produce data for evidential proceedings and the first published validated test for rhinos, one of the flagship species groups of the illegal wildlife trade and for which forensic tools are urgently required. This study serves as a model for how species identification tests should be standardized and disseminated for wildlife forensic testing.

Transferability of microsatellite markers in Syagrus coronata (Mart.) Becc. (Arecaceae), an iconic palm tree from the Brazilian semiarid region.

The licuri palm Syagrus coronata plays a key role in the ecology and economy of Brazilian semiarid region. Nonetheless, genetic data about populations of this species are absent even though the intensive and uncontrolled exploitation since colonial periods has threatened the sustainability and viability of licuri populations. Therefore, we attempted to test the efficacy of transferability of microsatellite loci isolated from three palm tree species to S. coronata to analyze the population of this species throughout their range. A set of 19 heterologous microsatellite loci was tested in three native populations of S. coronata from the State of Bahia, northeastern Brazil, which amplified using distinct annealing temperatures (50°-60°C). Based on the 10 most polymorphic loci, the selected populations exhibited a mean number of alleles per locus of 9.8, and high genetic diversity values since the expected heterozygosity ranged from 0.573 to 0.754, while the observed heterozygosity varied from 0.785 to 1.000. In conclusion, the tested loci are transferrable and highly efficient to population studies in S. coronata, thus minimizing the lack of species-specific loci to the genetic monitoring of licuri populations.

Evaluation of different PCR primers for denaturing gradient gel electrophoresis (DGGE) analysis of fungal community structure in traditional fermentation starters used for Hong Qu glutinous rice wine.

Denaturing gradient gel electrophoresis (DGGE) has become a widely used tool to examine microbial community structure. However, when DGGE is applied to evaluate the fungal community of traditional fermentation starters, the choice of hypervariable ribosomal RNA gene regions is still controversial. In the current study, several previously published fungal PCR primer sets were compared and evaluated using PCR-DGGE, with the purpose of screening a suitable primer set to study the fungal community of traditional fermentation starters for Hong Qu glutinous rice wine. Firstly, different primer sets were used to amplify different hypervariable regions from pure fungal cultures. Except NS1/FR1+ and ITS1fGC/ITS4, other primer sets (NL1+/LS2R, NL3A/NL4GC, FF390/FR1+, NS1/GCFung, NS3+/YM951r and ITS1fGC/ITS2r) amplified the target DNA sequences successfully. Secondly, the selected primer sets were further evaluated based on their resolution to distinguish different fungal cultures through DGGE fingerprints. Three primer sets (NL1+/LS2R, NS1/GCFung and ITS1fGC/ITS2r) were finally selected for investigating the fungal community structure of different traditional fermentation starters for Hong Qu glutinous rice wine. The internal transcribed spacer (ITS) region amplified by ITS1fGC/ITS2r, which is more hypervariable than the 18S rRNA gene and 26S rRNA gene, provides an excellent tool to separate amplification products of different fungal species. Results indicated that PCR-DGGE profile using ITS1fGC/ITS2r showed more abundant fungal species than that using NL1+/LS2R and NS1/GCFung. Therefore, ITS1fGC/ITS2r is the most suitable primer set for PCR-DGGE analysis of fungal community structure in traditional fermentation starters for Hong Qu glutinous rice wine. DGGE profiles based on ITS1fGC/ITS2r revealed the presence of twenty-four fungal species in traditional fermentation starter. A significant difference of fungal community can be observed directly from DGGE fingerprints and principal component analysis. The statistical analysis results based on the band intensities of fungal DGGE profile showed that Saccharomyces cerevisiae, Saccharomycopsis fibuligera, Rhizopus oryzae, Monascus purpureus and Aspergillus niger were the dominant fungal species. In conclusion, the comparison of several primer sets for fungal PCR-DGGE would be useful to enrich our knowledge of the fungal community structures associated with traditional fermentation starters, which may facilitate the development of better starter cultures for manufacturing Chinese Hong Qu glutinous rice wine.

Pathways to false-positive diagnoses using molecular genetic detection methods; Phytophthora cinnamomi a case study.

Phytophthora cinnamomi is one of the world's most invasive plant pathogens affecting ornamental plants, horticultural crops and natural ecosystems. Accurate diagnosis is very important to determine the presence or absence of this pathogen in diseased and asymptomatic plants. In previous studies, P. cinnamomi species-specific primers were designed and tested using various polymerase chain reaction (PCR) techniques including conventional PCR, nested PCR and quantitative real-time PCR. In all cases, the primers were stated to be highly specific and sensitive to P. cinnamomi. However, few of these studies tested their primers against closely related Phytophthora species (Phytophthora clade 7). In this study, we tested these purported P. cinnamomi-specific primer sets against 11 other species from clade 7 and determined their specificity; of the eight tested primer sets only three were specific to P. cinnamomi. This study demonstrated the importance of testing primers against closely related species within the same clade, and not just other species within the same genus. The findings of this study are relevant to all species-specific microbial diagnosis.

Standardization and application of the tetraprimer ARMS-PCR technique for screening of the E198A SNP in the ß-tubulin gene of hookworm populations in Brazil.

The tetraprimer ARMS-PCR technique is efficient for SNP detection and can be used to search for polymorphisms associated with drug resistance. However, the establishment of this methodology is not always straightforward because of the constraints on primer design due to the restrictions of the polymorphic regions. Here, we describe the standardization of the tetraprimer ARMS-PCR methodology for the detection of a SNP at codon 198 of the Ancylostoma caninum ß-tubulin gene. This SNP is associated with resistance to albendazole in various nematodes. The methodology was used to screen 327 individuals from 6 different locations. No mutation was found in any of the samples. This methodology will be useful for screening for the E198A SNP in the ß-tubulin gene of canine hookworms in a broader population to determine whether this SNP is associated with benzimidazole resistance in this species. The method could also be adapted for the analysis of other SNPs in other nematode species.

An in-house real-time polymerase chain reaction: standardisation and comparison with the Cobas Amplicor HBV monitor and Cobas AmpliPrep/Cobas TaqMan HBV tests for the quantification of hepatitis B virus DNA.

This study aimed to standardise an in-house real-time polymerase chain reaction (rtPCR) to allow quantification of hepatitis B virus (HBV) DNA in serum or plasma samples, and to compare this method with two commercial assays, the Cobas Amplicor HBV monitor and the Cobas AmpliPrep/Cobas TaqMan HBV test. Samples from 397 patients from the state of São Paulo were analysed by all three methods. Fifty-two samples were from patients who were human immunodeficiency virus and hepatitis C virus positive, but HBV negative. Genotypes were characterised, and the viral load was measure in each sample. The in-house rtPCR showed an excellent success rate compared with commercial tests; inter-assay and intra-assay coefficients correlated with commercial tests (r = 0.96 and r = 0.913, p < 0.001) and the in-house test showed no genotype-dependent differences in detection and quantification rates. The in-house assay tested in this study could be used for screening and quantifying HBV DNA in order to monitor patients during therapy.