Single-molecule conformational dynamics of a transcription factor reveals a continuum of binding modes controlling association and dissociation.

Binding and unbinding of transcription factors to DNA are kinetically controlled to regulate the transcriptional outcome. Control of the release of the transcription factor NF-κB from DNA is achieved through accelerated dissociation by the inhibitor protein IκBα. Using single-molecule FRET, we observed a continuum of conformations of NF-κB in free and DNA-bound states interconverting on the subseconds to minutes timescale, comparable to in vivo binding on the seconds timescale, suggesting that structural dynamics directly control binding kinetics. Much of the DNA-bound NF-κB is partially bound, allowing IκBα invasion to facilitate DNA dissociation. IκBα induces a locked conformation where the DNA-binding domains of NF-κB are too far apart to bind DNA, whereas a loss-of-function IκBα mutant retains the NF-κB conformational ensemble. Overall, our results suggest a novel mechanism with a continuum of binding modes for controlling association and dissociation of transcription factors.

Biochemical properties of VGLL4 from Homo sapiens and Tgi from Drosophila melanogaster and possible biological implications.

The TEAD (Sd in drosophila) transcription factors are essential for the Hippo pathway. Human VGLL4 and drosophila Tgi bind to TEAD/Sd via two distinct binding sites. These two regions are separated by few amino acids in VGLL4 but they are very distant from each other in Tgi. This difference prompted us to study whether it influences the interaction with TEAD4/Sd. We show that the full-length VGLL4/Tgi proteins behave as intrinsically disordered proteins. They have a similar affinity for TEAD4/Sd revealing that the length of the region between the two binding sites has little effect on the interaction. One of their two binding sites (high-affinity site) binds to TEAD4/Sd 100 times more tightly than to the other site, and size exclusion chromatography experiments reveal that VGLL4/Tgi only form trimeric complexes with TEAD4/Sd at high protein concentrations. In solution, therefore, VGLL4/Tgi may predominantly interact with TEAD4/Sd via their high-affinity site to create dimeric complexes. In contrast, when TEAD4/Sd molecules are immobilized on sensor chips used in Surface Plasmon Resonance experiments, one VGLL4/Tgi molecule can bind simultaneously with an enhanced affinity to two immobilized molecules. This effect, due to a local increase in protein concentration triggered by the proximity of the immobilized TEAD4/Sd molecules, suggests that in vivo VGLL4/Tgi could bind with an enhanced affinity to two nearby TEAD/Sd molecules bound to DNA. The presence of two binding sites in VGLL4/Tgi might only be required for the function of these proteins when they interact with TEAD/Sd bound to DNA.

Design of RGDS Peptide-Immobilized Self-Assembling ß-Strand Peptide from Barnacle Protein.

We designed three types of RGD-containing barnacle adhesive proteins using self-assembling peptides. In the present study, three types of RGD-containing peptides were synthesized by solid-phase peptide synthesis, and the secondary structures of these peptides were analyzed by CD and FT-IR spectroscopy. The mechanical properties of peptide hydrogels were characterized by a rheometer. We discuss the correlation between the peptide conformation, and cell attachment and cell spreading activity from the viewpoint of developing effective tissue engineering scaffolds. We created a peptide-coated cell culture substrate by coating peptides on a polystyrene plate. They significantly facilitated cell adhesion and spreading compared to a non-coated substrate. When the RGDS sequence was modified at N- or C-terminal of R-Y, it was found that the self-assembling ability was dependent on the strongly affects hydrogel formation and cell adhesion caused by its secondary structure.

Functional Comparison of Bioactive Cellulose Materials Incorporating Engineered Binding Proteins.

Whatman No. 1 chromatography paper is widely used as a substrate for cellulose-based immunoassays. The immobilized proteins are used to capture target biomarkers for detection. However, alternative paper substrates may facilitate mass production of immunoassays as diagnostic tests. Here, we assessed the physical characteristics and protein immobilization capabilities of different commercial papers. Some substrates fulfilled our design criteria, including adequate flow rate and sufficient protein immobilization for efficient target capture. This study demonstrates that a variety of paper substrates can be bioactivated and used to capture target biomarkers, enabling development of affordable diagnostic tests from a range of starting materials.

Simultaneously targeting nitrocellulose and antibody by a dual-headed protein.

Immobilizing antibodies on the nitrocellulose membrane is an important step to increase the sensitivity of the Lateral Flow Test strip for detecting pathogenic antigen. In our research, the fusion protein between nitrocellulose-binding anchor protein 3-Helix - a protein that has a strong affinity to nitrocellulose membrane and protein A - a protein that can bind to the Fc tail of IgG antibody was generated. This fusion protein was expected to help IgG antibodies to be more strongly binding and oriented immobilized onto the nitrocellulose membrane. The recombinant vector pET22b-proA and pET22b-proA-3-Helix coded for protein A and protein A-3-Helix were cloned. These proteins were overexpressed in BL21 and purified by immobilized metal affinity chromatography with purity above 90%. The purified protein was used to evaluate the orientation binding on nitrocellulose membranes by lateral flow challenge. Results showed that protein A-3-Helix binding to nitrocellulose membrane was better than that of protein A. The former protein increased antibody binding and stereochemical immobilizing onto nitrocellulose membrane compared to its protein A counterpart. In summary, we have succeeded in cloning, purifying, and characterizing a dual-head recombinant protein A and protein A-3-Helix. The results show the potential application of protein A-3-Helix in the immobilizing antibody on the test strip.

Immobilization of arrestin-3 on different biosensor platforms for evaluating GPCR binding.

G protein-coupled receptors (GPCRs) are a large and ubiquitous family of membrane receptors of great pharmacological interest. Cell-based assays are the primary tool for assessing GPCR interactions and activation but their design and intrinsic complexity limit their application. Biosensor-based assays that directly and specifically report GPCR-protein binding (e.g. arrestin or G protein) could provide a good alternative. We present an approach based on the stable immobilization of different arrestin-3 proteins (wild type, and two mutants, mutant X (arrestin-3 I386A) and mutant Y (arrestin-3 R393E)) via histidine tags on NTA(Ni2+)-coated sensors in a defined orientation. Using biolayer interferometry (BLI), surface plasmon resonance (SPR), and quartz crystal microbalance with dissipation (QCM-D), we were able to follow the interaction between the different arrestin-3 proteins and a representative GPCR, jumping spider rhodopsin-1 (JSR1), in a label-free manner in real-time. The interactions were quantified as binding affinity, association and dissociation rate constants. The combination of surface-based biosensing methods indicated that JSR1 showed the strongest binding to arrestin mutant Y. Taken together, this work introduces direct label-free, biosensor-based screening approaches that can be easily adapted for testing interactions of proteins and other compounds with different GPCRs.

Strategy to Immobilize Peptide Probe Selected through In Vitro Ribosome Display for Electrochemical Aptasensor Application.

In this study, we demonstrated an electrochemical aptasensor for calmodulin (CaM) detection and the peptide sequence (YWDKIKDFIGG) is obtained from in vitro ribosome display selection. To immobilize this peptide probe on the electrode surface, cystine was incorporated at the end of this peptide sequence. After a maleimide-functionalized poly(3,4-ethylenedioxythiophene), poly(EODT-MI), film was electropolymerized on the electrode, the peptide probe was immobilized through thiol-ene conjugation with the cystine end. Four peptides with different linkers were used for the binding test of bovine serum albumin and CaM using a quartz crystal microbalance. The zwitterionic linker EKEKEKEKEKEK provided good antifouling properties and the highest CaM binding. Furthermore, the immobilization of the peptide with this zwitterionic linker resulted in a minimal increase in the electrochemical impedance. By immobilizing the peptide with the selected zwitterionic linker, we successfully demonstrated an electrochemical aptasensor with a linear detection range for CaM from 0.01 to 10 mg/L and a detection limit of 0.001 mg/L.

Selective Immobilization of Fluorescent Proteins for the Fabrication of Photoactive Materials.

The immobilization of fluorescent proteins is a key technology enabling to fabricate a new generation of photoactive materials with potential technological applications. Herein we have exploited superfolder green (sGFP) and red (RFP) fluorescent proteins expressed with different polypeptide tags. We fused these fluorescent proteins to His-tags to immobilize them on graphene 3D hydrogels, and Cys-tags to immobilize them on porous microparticles activated with either epoxy or disulfide groups and with Lys-tags to immobilize them on upconverting nanoparticles functionalized with carboxylic groups. Genetically programming sGFP and RFP with Cys-tag and His-tag, respectively, allowed tuning the protein spatial organization either across the porous structure of two microbeads with different functional groups (agarose-based materials activated with metal chelates and epoxy-methacrylate materials) or across the surface of a single microbead functionalized with both metal-chelates and disulfide groups. By using different polypeptide tags, we can control the attachment chemistry but also the localization of the fluorescent proteins across the material surfaces. The resulting photoactive material formed by His-RFP immobilized on graphene hydrogels has been tested as pH indicator to measure pH changes in the alkaline region, although the immobilized fluorescent protein exhibited a narrower dynamic range to measure pH than the soluble fluorescent protein. Likewise, the immobilization of Lys-sGFP on alginate-coated upconverting nanoparticles enabled the infrared excitation of the fluorescent protein to be used as a green light emitter. These novel photoactive biomaterials open new avenues for innovative technological developments towards the fabrication of biosensors and photonic devices.

Purification-independent immunoreagents obtained by displaying nanobodies on bacteria surface.

The availability of preimmune libraries of antibody fragments allows for the fast generation of binders which can be expressed in both eukaryotic and prokaryotic systems. We exploited the recombinant nature of antibody fragments to demonstrate the possibility of expressing them as functional proteins displayed on the surface of Escherichia coli and by such a way to generate living reagents ready-to-use for diagnostics. Such immunoreagents were effectively exploited without the necessity of any purification step to prepare immunocapture surfaces suitable for the diagnostic of both cancer cells and toxic microalgae. The same nanobody-displaying bacteria were also engineered to coexpress GFP in their cytoplasm. Suspensions of such living fluorescent immunoreagents effectively bound to eukaryotic cells making them visible and quantifiable by flow cytometry analysis and using 96-well plate readers. The collected data showed the suitability of such living immunoreagents for reproducible and inexpensive diagnostic applications.

Identification of the anchoring protein SpoIIIJ for construction of the microbial cell surface display system in Bacillus spp.

Microbial cell surface display technology is a powerful tool for displaying proteins on the surfaces of cells. However, few anchoring proteins can be employed for the display of target proteins on the cell surface of the environmentally benign Gram-positive bacterium Bacillus subtilis. In this study, bioinformatics tools were used to screen all of the encoded proteins of B. subtilis for potential anchoring proteins. A green fluorescent protein (eGFP) reporter system was constructed to evaluate the cell-display efficiency of the selected membrane proteins and their promoters. The anchoring protein SpoIIIJ demonstrated the strongest anchoring activity of all of the selected anchoring proteins from Bacillus spp. cells. A linker was designed to link the anchoring protein SpoIIIJ and eGFP, which had the ability to increase the expression of the fusion protein by 58.32%. Two bio-remediated related proteins (the organophosphorus hydrolase OPHC2 and the metal binding protein CadR) were successfully expressed on the cell surfaces of Bacillus spp. using this system. Therefore, our results suggest that this microbial surface display system may be useful for the expression of target proteins on the cell surfaces and has potential applications in the bioremediation of environmental pollution.

Antibody-Binding, Antifouling Surface Coatings Based on Recombinant Expression of Zwitterionic EK Peptides.

Development of antifouling films which selectively capture or target proteins of interest is essential for controlling interactions at the "bio/nano" interface. However, in order to synthesize biofunctional films from synthetic polymers that incorporate chemical "motifs" for surface immobilization, antifouling, and oriented biomolecule attachment, multiple reaction steps need to be carried out at the solid/liquid interface. EKx is a zwitterionic peptide that has previously been shown to have excellent antifouling properties. In this study, we recombinantly expressed EKx peptides and genetically encoded both surface attachment and antibody-binding motifs, before characterizing the resultant biopolymers by traditional methods. These peptides were then immobilized to organosilica nanoparticles for binding IgG, and subsequently capturing dengue NS1 as a model antigen from serum-containing solution. We found that a mixed layer of a short peptide (4.9 kDa) "backfilled" with a longer peptide terminated with an IgG-binding Z-domain (18 kDa) demonstrated selective capture of dengue NS1 protein down to ∼10 ng mL-1 in either PBS or 20% serum.

In situ removal of consensus dengue virus envelope protein domain III fused to hydrophobin in Pichia pastoris cultures.

This work describes a novel strategy for the integrated expression and purification of recombinant proteins in Pichia pastoris cultures. Hydrophobins can be used as fusion tags, proteins fused to them alter their hydrophobicity and can be purified by aqueous two-phase systems (ATPS) based on non-ionic surfactants. Here, the consensus dengue virus envelope protein domain III fused to hydrophobin I of Trichoderma reesei was expressed in Pichia pastoris cultures and an in situ product removal by an ATPS using a non-ionic detergent, (Triton X-114) was performed. The protein was produced and purified directly from the yeast culture supernatant both efficiently and with no loss. The purified protein was properly immobilized by adsorption in solid phase and recognized by anti-dengue antibodies, showing its potential for the development of an indirect immunoassay for dengue virus.

Long-Range Modulations of Electric Fields in Proteins.

Electrostatic interactions are essential for controlling the protein structure and function. Whereas so far experimental and theoretical efforts focused on the effect of local electrostatics, this work aims at elucidating the long-range modulation of electric fields in proteins upon binding to charged surfaces. The study is based on cytochrome c (Cytc) variants carrying nitrile reporters for the vibrational Stark effect that are incorporated into the protein via genetic engineering and chemical modification. The Cytc variants were thoroughly characterized with respect to possible structural perturbations due to labeling. For the proteins in solution, the relative hydrogen bond occupancy and the calculated electric fields, both obtained from molecular dynamics (MD) simulations, and the experimental nitrile stretching frequencies were used to develop a relationship for separating hydrogen-bonding and non-hydrogen-bonding electric field effects. This relationship provides an excellent description for the stable Cytc variants in solution. For the proteins bound to Au electrodes coated with charged self-assembled monolayers (SAMs), the underlying MD simulations can only account for the electric field changes Δ Eads due to the formation of the electrostatic SAM-Cytc complexes but not for the additional contribution, Δ Eint, representing the consequences of the potential drops over the electrode/SAM/protein interfaces. Both Δ Eads and Δ Eint, determined at distances between 20 and 30 Å with respect to the SAM surface, are comparable in magnitude to the non-hydrogen-bonding electric field in the unbound protein. This long-range modulation of the internal electric field may be of functional relevance for proteins in complexes with partner proteins (Δ Eads) and attached to membranes (Δ Eads + Δ Eint).

In vitro generation and bioactivity evaluation of C-reactive protein intermediate.

The conformational conversion of pentameric C-reactive protein (pCRP) to monomeric CRP (mCRP) has been shown to play important roles in the action of CRP in inflammation regulation. In vivo studies revealed the origin of mCRP and provided insights into how pCRP dissociation affected its functions. However, the interplay and exact bioactivities of CRP isoforms still remain uncertain due to the rapid conformational conversion and complex milieu in vivo. Herein, we have used surface-immobilization of pCRP to generate a preservable intermediate with dual antigenicity expression of both pCRP and mCRP. The intermediate has been further shown to exhibit modified bioactivities, such as a high affinity with solution-phase pCRP and an enhanced capacity of complement interaction. These results thus not only provide the conformational conversion details of CRP, but also propose a simple way in vitro to study how the functions of CRP are tuned by distinct isoforms.

Biosynthesis of Thermoresponsive Magnetic Nanoparticles by Magnetosome Display System.

Thermoresponsive magnetic nanoparticles (MNPs) were synthesized using a magnetosome display system. An elastin-like polypeptide decamer of VPGVG (ELP10), which is hydrophobic above the transition temperature ( Tt) and can form an insoluble aggregation, was immobilized on biogenic MNPs in the magnetotactic bacterium, Magnetospirillum magneticum AMB-1. It was suggested that hydrophobicity of the MNP surface increased at 60 °C compared with 20 °C by the immobilization of ELP10. Size distribution analysis indicated that the immobilization of ELP10 onto MNPs induced the increased hydrophobicity with increasing temperatures up to 60 °C, promoting aggregation of the particles by hydrophobic and magnetic interactions. These results suggest that the acceleration of magnetic collection at 60 °C was caused by particle aggregation promoted by hydrophobic interaction between ELP-MNPs. Furthermore, the immobilization of ELP on MNPs gave a quick magnetic collection at 60 °C by external magnetic field. The thermoresponsive properties will further expand the utility of biotechnological applications of biogenic MNPs.

Purification-Free, Target-Selective Immobilization of a Protein from Cell Lysates.

Protein immobilization has been widely used for laboratory experiments and industrial processes. Preparation of a recombinant protein for immobilization usually requires laborious and expensive purification steps. Here, a novel purification-free, target-selective immobilization technique of a protein from cell lysates is reported. Purification steps are skipped by immobilizing a target protein containing a clickable non-natural amino acid (p-azidophenylalanine) in cell lysates onto alkyne-functionalized solid supports via bioorthogonal azide-alkyne cycloaddition. In order to achieve a target protein-selective immobilization, p-azidophenylalanine was introduced into an exogenous target protein, but not into endogenous non-target proteins using host cells with amber codon-free genomic DNAs. Immobilization of superfolder fluorescent protein (sfGFP) from cell lysates is as efficient as that of the purified sfGFP. Using two fluorescent proteins (sfGFP and mCherry), the authors also demonstrated that the target proteins are immobilized with a minimal immobilization of non-target proteins (target-selective immobilization).

Functionalized poly(3-hydroxybutyric acid) bodies as new in vitro biocatalysts.

Cytochromes P450 play a key role in the drug and steroid metabolism in the human body. This leads to a high interest in this class of proteins. Mammalian cytochromes P450 are rather delicate. Due to their localization in the mitochondrial or microsomal membrane, they tend to aggregate during expression and purification and to convert to an inactive form so that they have to be purified and stored in complex buffers. The complex buffers and low storage temperatures, however, limit the feasibility of fast, automated screening of the corresponding cytochrome P450-effector interactions, which are necessary to study substrate-protein and inhibitor-protein interactions. Here, we present the production and isolation of functionalized poly(3-hydroxybutyrate) granules (PHB bodies) from Bacillus megaterium MS941 strain. In contrast to the expression in Escherichia coli, where mammalian cytochromes P450 are associated to the cell membrane, when CYP11A1 is heterologously expressed in Bacillus megaterium, it is located on the PHB bodies. The surface of these particles provides a matrix for immobilization and stabilization of the CYP11A1 during the storage of the protein and substrate conversion. It was demonstrated that the PHB polymer basis is inert concerning the performed conversion. Immobilization of the CYP11A1 onto the PHB bodies allows freeze-drying of the complex without significant decrease of the CYP11A1 activity. This is the first lyophilization of a mammalian cytochrome P450, which allows storage over more than 18days at 4°C instead of storage at -80°C. In addition, we were able to immobilize the cytochrome P450 on the PHB bodies in vitro. In this case the expression of the protein is separated from the production of the immobilization matrix, which widens the application of this method. This article is part of a Special Issue entitled: Cytochrome P450 biodiversity and biotechnology, edited by Erika Plettner, Gianfranco Gilardi, Luet Wong, Vlada Urlacher, Jared Goldstone.

ATP binding and hydrolysis disrupt the high-affinity interaction between the heme ABC transporter HmuUV and its cognate substrate-binding protein.

Using the energy of ATP hydrolysis, ABC transporters catalyze the trans-membrane transport of molecules. In bacteria, these transporters partner with a high-affinity substrate-binding protein (SBP) to import essential micronutrients. ATP binding by Type I ABC transporters (importers of amino acids, sugars, peptides, and small ions) stabilizes the interaction between the transporter and the SBP, thus allowing transfer of the substrate from the latter to the former. In Type II ABC transporters (importers of trace elements, e.g. vitamin B12, heme, and iron-siderophores) the role of ATP remains debatable. Here we studied the interaction between the Yersinia pestis ABC heme importer (HmuUV) and its partner substrate-binding protein (HmuT). Using real-time surface plasmon resonance experiments and interaction studies in membrane vesicles, we find that in the absence of ATP the transporter and the SBP tightly bind. Substrate in excess inhibits this interaction, and ATP binding by the transporter completely abolishes it. To release the stable docked SBP from the transporter hydrolysis of ATP is required. Based on these results we propose a mechanism for heme acquisition by HmuUV-T where the substrate-loaded SBP docks to the nucleotide-free outward-facing conformation of the transporter. ATP binding leads to formation of an occluded state with the substrate trapped in the trans-membrane translocation cavity. Subsequent ATP hydrolysis leads to substrate delivery to the cytoplasm, release of the SBP, and resetting of the system. We propose that other Type II ABC transporters likely share the fundamentals of this mechanism.

RBM25 is a global splicing factor promoting inclusion of alternatively spliced exons and is itself regulated by lysine mono-methylation.

In eukaryotes, precursor mRNA (pre-mRNA) splicing removes non-coding intron sequences to produce mature mRNA. This removal is controlled in part by RNA-binding proteins that regulate alternative splicing decisions through interactions with the splicing machinery. RNA binding motif protein 25 (RBM25) is a putative splicing factor strongly conserved across eukaryotic lineages. However, the role of RBM25 in global splicing regulation and its cellular functions are unknown. Here we show that RBM25 is required for the viability of multiple human cell lines, suggesting that it could play a key role in pre-mRNA splicing. Indeed, transcriptome-wide analysis of splicing events demonstrated that RBM25 regulates a large fraction of alternatively spliced exons throughout the human genome. Moreover, proteomic analysis indicated that RBM25 interacts with components of the early spliceosome and regulators of alternative splicing. Previously, we identified an RBM25 species that is mono-methylated at lysine 77 (RBM25K77me1), and here we used quantitative mass spectrometry to show that RBM25K77me1 is abundant in multiple human cell lines. We also identified a region of RBM25 spanning Lys-77 that binds with high affinity to serine- and arginine-rich splicing factor 2 (SRSF2), a crucial protein in exon definition, but only when Lys-77 is unmethylated. Together, our findings uncover a pivotal role for RBM25 as an essential regulator of alternative splicing and reveal a new potential mechanism for regulation of pre-mRNA splicing by lysine methylation of a splicing factor.

Mechanism of pathogen recognition by human dectin-2.

Dectin-2, a C-type lectin on macrophages and other cells of the innate immune system, functions in response to pathogens, particularly fungi. The carbohydrate-recognition domain (CRD) in dectin-2 is linked to a transmembrane sequence that interacts with the common Fc receptor γ subunit to initiate immune signaling. The molecular mechanism by which dectin-2 selectively binds to pathogens has been investigated by characterizing the CRD expressed in a bacterial system. Competition binding studies indicated that the CRD binds to monosaccharides with modest affinity and that affinity was greatly enhanced for mannose-linked α1-2 or α1-4 to a second mannose residue. Glycan array analysis confirmed selective binding of the CRD to glycans that contain Manα1-2Man epitopes. Crystals of the CRD in complex with a mammalian-type high-mannose Man9GlcNAc2 oligosaccharide exhibited interaction with Manα1-2Man on two different termini of the glycan, with the reducing-end mannose residue ligated to Ca2+ in a primary binding site and the nonreducing terminal mannose residue occupying an adjacent secondary site. Comparison of the binding sites in DC-SIGN and langerin, two other pathogen-binding receptors of the innate immune system, revealed why these two binding sites accommodate only terminal Manα1-2Man structures, whereas dectin-2 can bind Manα1-2Man in internal positions in mannans and other polysaccharides. The specificity and geometry of the dectin-2-binding site provide the molecular mechanism for binding of dectin-2 to fungal mannans and also to bacterial lipopolysaccharides, capsular polysaccharides, and lipoarabinomannans that contain the Manα1-2Man disaccharide unit.