Long-Term Accumulation, Biological Effects and Toxicity of BSA-Coated Gold Nanoparticles in the Mouse Liver, Spleen, and Kidneys.

Introduction: Gold nanoparticles are promising candidates as vehicles for drug delivery systems and could be developed into effective anticancer treatments. However, concerns about their safety need to be identified, addressed, and satisfactorily answered. Although gold nanoparticles are considered biocompatible and nontoxic, most of the toxicology evidence originates from in vitro studies, which may not reflect the responses in complex living organisms. Methods: We used an animal model to study the long-term effects of 20 nm spherical AuNPs coated with bovine serum albumin. Mice received a 1 mg/kg single intravenous dose of nanoparticles, and the biodistribution and accumulation, as well as the organ changes caused by the nanoparticles, were characterized in the liver, spleen, and kidneys during 120 days. Results: The amount of nanoparticles in the organs remained high at 120 days compared with day 1, showing a 39% reduction in the liver, a 53% increase in the spleen, and a 150% increase in the kidneys. The biological effects of chronic nanoparticle exposure were associated with early inflammatory and fibrotic responses in the organs and were more pronounced in the kidneys, despite a negligible amount of nanoparticles found in renal tissues. Conclusion: Our data suggest, that although AuNPs belong to the safest nanomaterial platforms nowadays, due to their slow tissue elimination leading to long-term accumulation in the biological systems, they may induce toxic responses in the vital organs, and so understanding of their long-term biological impact is important to consider their potential therapeutic applications.

"Sustained irrigation" effect enhanced the accumulation and retention of ultra-long circulating nanoparticles in tumor.

The development of ultra-long circulating nanodrug delivery systems have showed distinct advantage in maintaining the long-lasting tumor retention. Although the relationship between extended tumor retention and ultra-long plasma half-life was apparent, there was still a lack of experimental evidence to reveal the enhancement mechanism. Herein, we proposed a concept of "Sustained Irrigation" effect ("SI" effect) to elucidate that it was through sustained blood irrigation that the ultra-long circulating nanoparticles achieved long-lasting tumor retention. Besides, in order to intuitively verify the "SI" effect, we developed an "ON-OFF-ON" fluorescence switch technology. The ultra-long circulating delivery nanoparticle was constructed by encapsulating the protein with hydrophilic polymer shell. Nanoparticles with ultra-long plasma half-life (t1/2>40 h) fabricated by this method were employed as models for demonstrating the "SI" effect. The recovery of Cy5.5 fluorescence after the laser quenching meant the "fresh" Cy5.5-labeled nanoparticles were entering tumor, which confirmed the ultra-long circulating nanoparticles in blood could sustainedly irrigate to tumor. Our finding revealed the key mechanism by which ultra-long circulating NDDSs enhanced the tumor accumulation and retention, and provided experimental support for the development of ultra-long circulating delivery system in clinic.

Treatment of spinal tuberculosis in rabbits using bovine serum albumin nanoparticles loaded with isoniazid and rifampicin.

OBJECTIVE: To evaluate the clinical efficacy of bovine serum albumin nanoparticles loaded with isoniazid and rifampicin (INH-RFP-BSA-NPs) in the treatment of spinal tuberculosis in rabbits. METHODS: 35 spinal tuberculosis rabbit models were grouped into three groups, including 14 in group A and group B respectively and 7 in group C.All rabbits in group A were treated by INH-RFP-BSA-NPs's injection and in group B were treated with classic dosage form of INH and RFP, while in group C normal saline was given as the blank control. After intervention, the body weighing and CT scan, as well as concentration's measurement of INH and RFP in blood and tissues, were performed in all rabbits at the time of the 6thweek and 12th week, respectively. RESULTS: In group A, rabbits' weight increased by 0.44 kg and 0.27 kg within 6 weeks and 12 weeks' treatment respectively. The bactericidal concentrations of 1.64 µg•g-1 for INH and 21.36 µg•g-1 for RFP were measured in focus vertebral body 6 weeks post-injection and six weeks later the concentrations of INH and RFP in vertebral body still maintained at the level of 1.96 µg•g-1 and 22.35 µg•g-1respectively. After 12 weeks therapy, CT-scanned showed all the necrotic tissue was replaced by normal bone tissue. In group B, all rabbits had no significant increment of body weight and 4 rabbits had paralysis of hind leg. The concentrations of INH and RFP in vertebral body and focus were much lower than group A. CT-scanned showed the focus vertebral body was only partially repaired after 12 weeks' therapy. CONCLUSION: The INH-RFP-BSA-NPs has the characteristics of sustained release in vivo and target biodistribution in focus vertebral body. Its therapeutic effect in rabbit spinal tuberculosis is much better than common INH and RFP.

Enhanced model protein adsorption of nanoparticulate hydroxyapatite thin films on silk sericin and fibroin surfaces.

Hydroxyapatite coated metallic implants favorably combine the required biocompatibility with the mechanical properties. As an alternative to the industrial coating method of plasma spraying with inherently potential deleterious effects, sol-gel methods have attracted much attention. In this study, the effects of intermediate silk fibroin and silk sericin layers on the protein adsorption capacity of hydroxyapatite films formed by a particulate sol-gel method were determined experimentally. The preparation of the layered silk protein/hydroxyapatite structures on glass substrates, and the effects of the underlying silk proteins on the topography of the hydroxyapatite coatings were described. The topography of the hydroxyapatite layer fabricated on the silk sericin was such that the hydroxyapatite particles were oriented forming an oriented crystalline surface. The model protein (bovine serum albumin) adsorption increased to 2.62 µg/cm2 on the latter surface as compared to 1.37 µg/cm2 of hydroxyapatite on glass without an intermediate silk sericin layer. The BSA adsorption on glass (blank), glass/c-HAp, glass/m-HAp, glass/sericin/c-HAp, and glass/sericin/m-HAp substrates, reported as decrease in BSA concentration versus contact time.

Protein microbeadification to achieve highly concentrated protein formulation with reversible properties and in vivo pharmacokinetics after reconstitution.

A protein precipitation technique was optimized to produce biophysically stable 'protein microbeads', applicable to highly concentrated protein formulation. Initially, production of BSA microbeads was performed using rapid dehydration by vortexing in organic solvents followed by cold ethanol treatment and a vacuum drying. Out of four solvents, n-octanol produced the most reversible microbeads upon reconstitution. A Shirasu porous glass (SPG) membrane emulsification technique was utilized to enhance the size distribution and manufacturing process of the protein microbeads with a marketized human IgG solution. Process variants such as dehydration time, temperature, excipients, drying conditions, and initial protein concentration were evaluated in terms of the quality of IgG microbeads and their reversibility. The hydrophobized SPG membrane produced a narrow size distribution of the microbeads, which were further enhanced by shorter dehydration time, low temperature, minimized the residual solvents, lower initial protein concentration, and addition of trehalose to the IgG solution. Final reversibility of the IgG microbeads with trehalose was over 99% at both low and high protein concentrations. Moreover, the formulation was highly stable under repeated mechanical shocks and at an elevated temperature compared to its liquid state. Its in vivo pharmacokinetic profiles in rats were consistent before and after the 'microbeadification'.

Subcutaneous Delivery of Albumin: Impact of Thermosensitive Hydrogels.

Albumin demonstrates remarkable promises as a versatile carrier for therapeutic and diagnostic agents. However, noninvasive delivery of albumin-based therapeutics has been largely unexplored. In this study, injectable thermosensitive hydrogels were evaluated as sustained delivery systems for Cy5.5-labeled bovine serum albumin (BSA-Cy5.5). These hydrogels were prepared using aqueous solutions of Poloxamer 407 (P407) or poly(lactide-co-glycolide)-block-poly(ethylene glycol)-block-poly(lactide-co-glycolide) (PLGA-PEG-PLGA), which could undergo temperature-triggered phase transition and spontaneously solidify into hydrogels near body temperature, serving as in situ depot for tunable cargo release. In vitro, these hydrogels were found to release BSA-Cy5.5 in a sustained manner with the release half-life of BSA-Cy5.5 from P407 and PLGA-PEG-PLGA hydrogels at 16 h and 105 h, respectively. Without affecting the bioavailability, subcutaneous administration of BSA-Cy5.5-laden P407 hydrogel resulted in delayed BSA-Cy5.5 absorption, which reached the maximum plasma level (Tmax) at 24 h, whereas the Tmax for subcutaneously administered free BSA-Cy5.5 solution was 8 h. Unexpectedly, subcutaneously injected BSA-Cy5.5-laden PLGA-PEG-PLGA hydrogel did not yield sustained BSA-Cy5.5 plasma level, the bioavailability of which was significantly lower than that of P407 hydrogel (p < 0.05). The near-infrared imaging of BSA-Cy5.5-treated mice revealed that a notable portion of BSA-Cy5.5 remained trapped within the subcutaneous tissues after 6 days following the subcutaneous administration of free solution or hydrogels, suggesting the discontinuation of BSA-Cy5.5 absorption irrespective of the formulations. These results suggest the opportunities of developing injectable thermoresponsive hydrogel formulations for subcutaneous delivery of albumin-based therapeutics.

Entrapment and release kinetics study of dyes from BSA microspheres forming a matrix and a reservoir system.

Two kinds of Bovine Serum Albumin (BSA)-loaded microspheres were prepared in water-organic bilayer systems using ultrasonic irradiation. The first method included an aqueous solution of BSA and water-soluble dye together, mixed with dodecane, that upon sonication formed a matrix system where the dye is concentrated in the protein shell. The other system included an aqueous solution of BSA mixed with octanol-soluble dye that, upon sonication, formed a reservoir system in which the dye filled the inner volume of the microspheres. Each of these microspheres was prepared with two different dyes and their leaching profiles into pure solvents were studied using UV-vis spectrometry. Fast leaching was observed at the beginning for both systems, which levelled-off after a certain time. For the matrix system, an equilibrium state was obtained after 100-200 hours, whereas for the reservoir system, leaching occurred much faster, within 1-3 hours. Such systems can serve as models for drug delivery agents.

Defect-engineered transition metal hydroxide nanosheets realizing tumor-microenvironment-responsive multimodal-imaging-guided NIR-II photothermal therapy.

Exploiting two-dimensional nanomaterials as photo-based theranostic agents is promising for the highly efficient ablation of deep-tissue-buried tumors. However, they are limited by their poor absorption in the second near-infrared-light (NIR-II) bio-window (1000-1300 nm) and intrinsic nonbiodegradability. Herein, defect-rich sulfur-doped Ni(OH)2 (S-Ni(OH)2) nanosheets decorated with bovine serum albumin (BSA) as a novel theranostic agent is developed, which can accomplish multimodal-imaging-guided photothermal ablation of mouse cancers in the NIR-II bio-window. Sulfur doping extends the absorption spectra of Ni(OH)2 nanosheets from the visible to NIR-II bio-window, affording highly efficient photothermal conversion (58.20% for 1064 nm), entailing it to become an excellent contrast agent for photoacoustic imaging. Further, because of their intrinsic paramagnetic property, they can be applied for magnetic resonance imaging. Owing to the abundant defective sites in S-Ni(OH)2 nanosheets, they exhibit response to the tumor microenvironment, resulting in effective biodegradation and excretion from the body. In vivo toxicity experiments indicated that S-Ni(OH)2-BSA NSs delivered no appreciable toxicity and good biocompatibility. This work provides an avenue for the rational design of effective theranostics agents.

Preparation and Evaluation of Cabazitaxel-Loaded Bovine Serum Albumin Nanoparticles for Prostate Cancer.

PURPOSE: Cabazitaxel (CBZ) is a new taxane-based antitumor drug approved by the FDA for the treatment of prostate cancer, especially for patients with advanced prostate cancer for whom docetaxel is ineffective or causes aggravation. However, Tween 80 injection can cause serious allergic reactions, and CBZ itself has strong toxicity, adverse reactions, and poor tumor selectivity, which greatly limits its clinical applications. Therefore, the CBZ-loaded bovine serum albumin nanoparticles (CBZ-BSA-Gd-NPs) were developed to overcome the allergenic response of Tween 80 and realize the integration of diagnosis and treatment. METHODS: CBZ-BSA-Gd-NPs were prepared by the biomineralization method. The characterization, magnetic resonance imaging (MRI), safety, and antitumor activity of the nanoparticles were evaluated in vitro and in vivo. RESULTS: The prepared nanoparticles were uniform in size (166 nm), with good MRI performance and stability over 24 h. Compared with CBZ-Tween 80 injection, CBZ-BSA-Gd-NPs showed much lower hemolysis, similar tumor inhibition, and enhanced cellular uptake in vitro. The pharmacokinetic behavior of CBZ-BSA-Gd-NPs in rats showed that the retention time of the nanoparticles was prolonged, the clearance rate decreased, and the area under the drug-time curve increased. The distribution of CBZ-BSA-Gd-NPs in nude mice was characterized by UPLC-MS/MS and MRI, and the results showed that CBZ-BSA-Gd-NPs could effectively target tumor tissues with reduced distribution in the heart, liver, spleen, lungs, and kidneys compared with CBZ-Tween 80, which indicated that CBZ-BSA-Gd-NPs not only had a passive targeting effect on tumor tissue but also achieved the integration of diagnosis and treatment. In vivo, CBZ-BSA-Gd-NPs showed improved tumor inhibitory effect with a safer profile. CONCLUSION: In summary, CBZ-BSA-Gd-NPs can serve as an effective therapeutic drug carrier to deliver CBZ into prostate cancer, and realize the integration of diagnosis and therapy.

Characteristics, Cryoprotection Evaluation and In Vitro Release of BSA-Loaded Chitosan Nanoparticles.

Chitosan nanoparticles (CS-NPs) are under increasing investigation for the delivery of therapeutic proteins, such as vaccines, interferons, and biologics. A large number of studies have been taken on the characteristics of CS-NPs, and very few of these studies have focused on the microstructure of protein-loaded NPs. In this study, we prepared the CS-NPs by an ionic gelation method, and bovine serum albumin (BSA) was used as a model protein. Dynamic high pressure microfluidization (DHPM) was utilized to post-treat the nanoparticles so as to improve the uniformity, repeatability and controllability. The BSA-loaded NPs were then characterized for particle size, Zeta potential, morphology, encapsulation efficiency (EE), loading capacity (LC), and subsequent release kinetics. To improve the long-term stability of NPs, trehalose, glucose, sucrose, and mannitol were selected respectively to investigate the performance as a cryoprotectant. Furthermore, trehalose was used to obtain re-dispersible lyophilized NPs that can significantly reduce the dosage of cryoprotectants. Multiple spectroscopic techniques were used to characterize BSA-loaded NPs, in order to explain the release process of the NPs in vitro. The experimental results indicated that CS and Tripolyphosphate pentasodium (TPP) spontaneously formed the basic skeleton of the NPs through electrostatic interactions. BSA was incorporated in the basic skeleton, adsorbed on the surface of the NPs (some of which were inlaid on the NPs), without any change in structure and function. The release profiles of the NPs showed high consistency with the multispectral results.

Development of new in vitro models of lung protease activity for investigating stability of inhaled biological therapies and drug delivery systems.

Proteases play a vital role in lung health and are critically important to the metabolic clearance of inhaled protein-based therapeutics after inhalation. Surprisingly little is known about lung fluid protease composition and there is a consequent lack of biorelevant experimental models, which limits research and development in the burgeoning field of inhaled biologics. The aim of this study was to quantify proteases in human lung fluid and to use this data to design novel in vitro experimental models of lung lining fluid possessing biorelevant lung protease activity for use in biopharmaceutical stability studies. As a proof of concept, these novel models were used to investigate the effect of proteolytic activity on the stability of albumin nanoparticles, a biologic nanoparticle formulation widely investigated as a pulmonary drug delivery system. Bronchoalveolar lavage fluid was collected from healthy human volunteers and proteomic analysis was used to quantify the predominant proteases. Based on these data, four new lung protease models were constructed based on: (i) trypsin as a sole protease, (ii) dipeptidyl peptidase IV, cathepsin D, cathepsin H, and angiotensin converting enzyme in ratio and concentration to mimic the protease concentration in healthy lungs. Neutrophil elastase was used to model protease activity in inflammation. Albumin nanoparticles of 100 nm diameter remained intact over 48 h in phosphate buffered saline, but were degraded more rapidly in trypsin (50% reduction in 10 min) compared to the healthy lung protease model (50% reduction in 150 min). The addition of neutrophil elastase to the healthy lung protease model resulted in a similar, but more variable degradation profile. Nanoparticle degradation was associated with concomitant appearance of small fragments and aggregates. In conclusion, we have characterised the protease concentration in the lungs of healthy humans, designed models of lung protease activity and demonstrated their utility in studying albumin nanoparticle degradation. These methods and models have wide application to study the influence of proteases in lung disease, expression of proteases in respiratory cell culture models, stability of peptide and protein-based drugs and inhaled drug delivery systems.

Release kinetics of the model protein FITC-BSA from different polymer-coated bovine bone substitutes.

BACKGROUND: Controlled release of proteins bound to conventional bone substitutes is still insufficient. Therefore, this study evaluates in-vitro release kinetics of the model protein FITC-BSA (fluorescein conjugated bovine serum albumine) from insoluble bovine collagenous bone matrices (ICBM) with different polymer coatings. Analyzes aim at comparing FITC-BSA release from uncoated versus coated ICBM over time to find bone substitute coatings with consistent release profiles. METHODS: Release kinetics of FITC-BSA from uncoated as well as coated ICBM with five different polymers (RESOMER R 203 H, RG 503 H, RG 504 H, RG 505, L 206 S) were measured over a period of 11 days (d). Measurements were conducted after 6 h (h), 12 h, 24 h, 3 d, 5 d, 7 d, 9 d and 11 d with six samples for each coated ICBM. Two groups were formed (1) with and (2) without medium change at times of measurement. For each group ANOVA with post-hoc Bonferroni testing was used. Scanning electron microscopy assessed morphologic differences between ICBM coating. RESULTS: In group 1 approx. 70% of FITC-BSA release from uncoated ICBM occurred after 6 h compared to approx. 50% in group 2. Only polymers with medium inherent viscosity, i.e. RESOMER RG 503 H, constantly showed significantly more FITC-BSA release throughout 11 d than uncoated ICBM (p = 0.007). The same was found for group 2 (p = 0.005). No significant differences between PLA and PLGA polymers were found. Scanning electron microscopy results indicate a weak adhesion of polymer coatings to ICBM explaining its rather weak retentive effect on overall FITC-BSA release. CONCLUSIONS: Medium molecular size polymers reduce the overall released FITC-BSA from ICBM over time. In clinical practice these polymers may prove ideal for bone substitute materials.

Albumin-chaperoned cyanine dye yields superbright NIR-II fluorophore with enhanced pharmacokinetics.

NIR-II fluorescence imaging greatly reduces scattering coefficients for nearly all tissue types at long wavelengths, benefiting deep tissue imaging. However, most of the NIR-II fluorophores suffer from low quantum yields and/or short circulation time that limit the quality of NIR-II imaging. Here, we engineered a supramolecular assembly of protein complex with lodged cyanine dyes to produce a brilliant NIR-II fluorophore, providing a NIR-II quantum yield of 21.2% with prolonged circulation time. Computational modeling revealed the mechanism for fluorescence enhancement and identified key parameters governing albumin complex for NIR-II fluorophores. Our complex afforded high-resolution microvessel imaging, with a 3-hour imaging window compared to 2 min for free dye alone. Furthermore, the complexation strategy was applied to an antibody-derived assembly, offering high-contrast tumor imaging without affecting the targeting ability of the antibody. This study provides a facile strategy for producing high-performance NIR-II fluorophores by chaperoning cyanine dyes with functional proteins.

Improvement in bioactive protein storage stability and colon-targeted release: a simple double-layer chitosan-based particle.

Aim: To improve the long-term storage stability of a bioactive protein and the subsequent colon-targeted release, a double-layer chitosan (CS)-based particle was developed. Methods: To form the double-layer CS-based particle, the second layer was crosslinked onto the single-layer bovine serum albumin (BSA)-loaded CS-based particle. The structure and properties of particles were further investigated. Results: With the second layer, the double-layer particles became more compact, which was important for the inhibition of bioactive protein leakage during storage through strong electrostatic interactions and swelling of the hydrogels. After 30 d of storage, there was only 43.74-49.32% BSA leakage from the C15-TPP/C15-HMP double-layer particles. Moreover, the BSA release in subsequent colon-targeted delivery after storage was 44.02-48.59%. Conclusions: With double-layer shielding and a more compact arrangement, it was possible to reduce bioactive protein leakage over long periods storage and achieve subsequent colon-targeted delivery.

Subcellular distributions of iron oxide nanoparticles in rat brains affected by different surface modifications.

The impact of the surface modification on the subcellular distribution of nanoparticles in the brain remains elusive. The nanoparticles prepared by conjugating polyethylene glycol and maleic anhydride-coated superparamagnetic iron oxide nanoparticles (Mal-SPIONs) with bovine serum albumin (BSA/Mal-SPIONs) and with Arg-Gly-Asp peptide (RGD/Mal-SPIONs) were injected into the rat substantia nigra. Observation of transmission electron microscopy (TEM) samples obtained 24 h after perfusion showed that abundant RGD/Mal-SPIONs accumulated in the myelin sheath, dendrites, axon terminals and mitochondria, and on cell membranes in the brain tissue near the injection site. For rats injected with BSA/Mal-SPIONs, a few nanoparticles accumulated in the myelin sheath, axon terminals, endoplasmic reticulum, mitochondria, Golgi, and lysosomes of neurons and glial cells while least SPIONs in rats injected with Mal-SPIONs were found. TEM pictures showed some Mal-SPIONs were expelled out of the brain. RGD/Mal-SPIONs diffused extensively to the thalamus, frontal cortex, temporal lobe, olfactory bulb, and brain stem after injection. Only a few BSA/Mal-SPIONs diffused to the afore-mentioned brain areas. This work reveals different surface modifications on the iron oxide nanoparticles play crucial roles in their distribution and diffusion in the rat brains.

Development and Characterization of Florfenicol-Loaded BSA Nanoparticles as Controlled Release Carrier.

Florfenicol (FLO) is a broad-spectrum fluorinated antibiotic used for the treatment of bacterial diseases such as bovine respiratory disease (BRD) in cattle. FLO is a poorly soluble drug in aqueous solution, and its encapsulation in various nanovehicles has been reported to be less than 30%. In this context, the use of bovine serum albumin (BSA) as a nanocarrier for FLO is an interesting approach. BSA is a biocompatible, biodegradable, nontoxic, and nonimmunogenic natural protein, allowing the vehiculization of hydrophilic and hydrophobic drugs with a well-tolerated administration. The present work focuses on the fabrication and characterization of florfenicol-loaded BSA (FLO-BSA NPs), incorporation efficiency, and in vitro release pattern. FLO-BSA NPs nanoparticles were successfully obtained by a simple, low-cost and in a few steps method. The physicochemical properties of the obtained nanoparticles such as size (~ 120 nm), polydispersity index (0.04), and zeta potential (approximately - 40 mV) suggest a high colloidal stability and suitable characteristics for drug delivery. The drug loading reveals a high incorporation of florfenicol in the nanoparticles, in which 33.6 molecules of FLO are encapsulated per each molecule of BSA. The in vitro release profile exhibits an initial stage characterized by the burst effect and then a prolonged release of FLO from the albumin matrix, which is compatible with the Higuchi model and which follows a Fickian diffusion. The results together suggest a suitable tool for future investigations in drug delivery field in order to use this nanomaterial in food, pharmaceutical, and veterinary industry.

Lactosylated Albumin Nanoparticles: Potential Drug Nanovehicles with Selective Targeting Toward an In Vitro Model of Hepatocellular Carcinoma.

Hepatocellular carcinoma (HCC) ranks fifth in occurrence and second in mortality of all cancers. The development of effective therapies for HCC is urgently needed. Anticancer drugs targeted to the liver-specific asialoglycoprotein receptors (ASGPRs) are viewed as a promising potential treatment for HCC. ASGPRs facilitate the recognition and endocytosis of molecules, and possibly vehicles with galactose end groups, by the liver. In this study, bovine serum albumin (BSA) was conjugated with lactose using a thermal treatment. The formation of lactosylated BSA (BSA-Lac) was confirmed by a change of the chemical structure, increased molecular mass, and Ricinus communis lectin recognition. Subsequently, the low-crosslinking BSA-Lac nanoparticles (LC BSA-Lac NPs) and high-crosslinking BSA-Lac nanoparticles (HC BSA-Lac NPs) were synthesized. These nanoparticles presented spherical shapes with a size distribution of 560 ± 18.0 nm and 539 ± 9.0 nm, as well as an estimated surface charge of -26 ± 0.15 mV and -24 ± 0.45 mV, respectively. Both BSA-Lac NPs were selectively recognized by ASGPRs as shown by biorecognition, competition, and inhibition assays using an in vitro model of HCC. This justifies pursuing the strategy of using BSA-Lac NPs as potential drug nanovehicles with selective direction toward hepatocellular carcinoma.

Binding Characterization of Aptamer-Drug Layered Microformulations and In Vitro Release Assessment.

Efficient delivery of adequate active ingredients to targeted malignant cells is critical, attributing to recurrent biophysical and biochemical challenges associated with conventional pharmaceutical delivery systems. These challenges include drug leakage, low targeting capability, high systemic cytotoxicity, and poor pharmacokinetics and pharmacodynamics. Targeted delivery system is a promising development to deliver sufficient amounts of drug molecules to target cells in a controlled release pattern mode. Aptameric ligands possess unique affinity targeting capabilities which can be exploited in the design of high pay-load drug formulations to navigate active molecules to the malignant sites. This study focuses on the development of a copolymeric and multifunctional drug-loaded aptamer-conjugated poly(lactide-co-glycolic acid)-polyethylenimine (PLGA-PEI) (DPAP) delivery system, via a layer-by-layer synthesis method, using a water-in-oil-in-water double emulsion approach. The binding characteristics, targeting capability, biophysical properties, encapsulation efficiency, and drug release profile of the DPAP system were investigated under varying conditions of ionic strength, polymer composition and molecular weight (MW), and degree of PEGylation of the synthetic core. Experimental results showed increased drug release rate with increasing buffer ionic strength. DPAP particulate system obtained the highest drug release of 50% at day 9 at 1 M NaCl ionic strength. DPAP formulation, using PLGA 65:35 and PEI MW of ∼800 Da, demonstrated an encapsulation efficiency of 78.93%, and a loading capacity of 0.1605 mg bovine serum albumin per mg PLGA. DPAP (PLGA 65:35, PEI MW∼25 kDa) formulation showed a high release rate with a biphasic release profile. Experimental data depicted a lower targeting power and reduced drug release rate for the PEGylated DPAP formulations. The outcomes from the present study lay the foundation to optimize the performance of DPAP system as an effective synthetic drug carrier for targeted delivery.

Development and in vivo evaluation of chitosan nanoparticles for the oral delivery of albumin.

Albumin is used as a plasma expander in critically ill patients and for several other clinical applications mainly via intravenous infusion. Oral administration of albumin can improve patient compliance although limited oral bioavailability of proteins is still a major challenge. Although nanomaterials have been extensively utilized for improving oral delivery of proteins, albumin has been utilized only as either a model drug or as a carrier for drug delivery. In the current study, for the first time, chitosan nanoparticles have been developed and extensively optimized to improve oral bioavailability of albumin as a therapeutic protein. Several characterizations have been performed for the albumin-loaded nanoparticles (e.g. drug encapsulation efficiency, DSC, FTIR, particle size, zeta potential, morphology, release kinetics, and enzymatic stability). Nanosized spherical particles were prepared and demonstrated high stability over three months either in a powdered form or as suspensions. Sustained release of albumin over time and high enzymatic stability as compared to the free albumin were observed. In vivo, higher serum concentrations of albumin in normal rabbits and cirrhotic rats were attained following oral and intraperitoneal administrations of the albumin-loaded nanoparticles as compared to the free albumin. The nanoparticles developed in the current study might provide efficient nanovehicles for oral administration of therapeutic albumin.

Silk fibroin nanoparticles for enhanced bio-macromolecule delivery to the retina.

The aim of this study was to investigate intravitreal injection of silk fibroin nanoparticles (SFNs) encapsulating bio-macromolecules, achieving enhanced drug bioavailability, and extended retention in retina. SFNs were prepared with regenerated silk fibroin using desolvation method with fluorescein isothiocyanate labeled bovine serum albumin (FITC-BSA) as bio-macromolecular model drug encapsulated. In vitro physicochemical properties and in vitro drug release of FITC-BSA loaded SFNs (FITC-BSA-SFNs) were evaluated. Cytotoxicity, cellular uptake, and retention of FITC-BSA-SFNs were determined in human retinal pigment epithelial cell line (ARPE-19). In addition, in vivo distribution and safety of intravitreally administered FITC-BSA-SFNs were investigated in New Zealand white rabbits. The particle size of FITC-BSA-SFNs was 179.1 ± 3.7 nm with polydispersity index of 0.102 ± 0.033 and the zeta potential was greater than -25 mV. FITC-BSA-SFNs exhibited excellent biocompatibility with no cytotoxicity observed within 24 and 48 h in AREP-19 cells. Compared to FITC-BSA solution, FITC-BSA-SFNs showed enhanced cellular uptake and prolonged retention. Furthermore, FITC-BSA-SFNs achieved accumulated distribution and extended retention in retina in vivo following intravitreal injection compared to a single administration of free drug solution. Therefore, this bio-macromolecule delivery platform based on SFNs could have great potential in the treatment of posterior segment disorders.