Molecular determinants of pro-arrhythmia proclivity of d- and l-sotalol via a multi-scale modeling pipeline.

Drug isomers may differ in their proarrhythmia risk. An interesting example is the drug sotalol, an antiarrhythmic drug comprising d- and l- enantiomers that both block the hERG cardiac potassium channel and confer differing degrees of proarrhythmic risk. We developed a multi-scale in silico pipeline focusing on hERG channel - drug interactions and used it to probe and predict the mechanisms of pro-arrhythmia risks of the two enantiomers of sotalol. Molecular dynamics (MD) simulations predicted comparable hERG channel binding affinities for d- and l-sotalol, which were validated with electrophysiology experiments. MD derived thermodynamic and kinetic parameters were used to build multi-scale functional computational models of cardiac electrophysiology at the cell and tissue scales. Functional models were used to predict inactivated state binding affinities to recapitulate electrocardiogram (ECG) QT interval prolongation observed in clinical data. Our study demonstrates how modeling and simulation can be applied to predict drug effects from the atom to the rhythm for dl-sotalol and also increased proarrhythmia proclivity of d- vs. l-sotalol when accounting for stereospecific beta-adrenergic receptor blocking.

Assessment of the ecotoxicity of the pharmaceuticals bisoprolol, sotalol, and ranitidine using standard and behavioral endpoints.

The pharmaceuticals bisoprolol (BIS), sotalol (SOT), and ranitidine (RAN) are among the most consumed pharmaceuticals worldwide and are frequently detected in different aquatic ecosystems. However, very few ecotoxicity data are available in the literature for them. To help fill these data gaps, toxicity tests with the algae Raphidocelis subcapitata, the macrophyte Lemna minor, the cnidarian Hydra attenuata, the crustacean Daphnia similis, and the fish Danio rerio were performed for assessing the ecotoxicity of these pharmaceuticals. Standard, as well as non-standard endpoint, was evaluated, including the locomotor behavior of D. rerio larvae. Results obtained for SOT and RAN showed that acute adverse effects are not expected to occur on aquatic organisms at the concentrations at which these pharmaceuticals are usually found in fresh surface waters. On the other hand, BIS was classified as hazardous to the environment in the acute III category. Locomotor behavior of D. rerio larvae was not affected by BIS and RAN. A disturbance on the total swimming distance at the dark cycle was observed only for larvae exposed to the highest test concentration of 500 mg L-1 of SOT. D. similis reproduction was affected by BIS with an EC10 of 3.6 (0.1-34.0) mg L-1. A risk quotient (RQ) of 0.04 was calculated for BIS in fresh surface water, considering a worst-case scenario. To the best of our knowledge, this study presents the first chronic toxicity data with BIS on non-target organisms.

Metal organic framework HKUST-1 modified with carboxymethyl-ß-cyclodextrin for use in improved open tubular capillary electrochromatographic enantioseparation of five basic drugs.

This work shows that the metal organic framework (MOF) HKUST-1 of type Cu3(BTC)2 (also referred to as MOF-199; a face-centered-cubic MOF containing nanochannels) is a most viable coating for use in enantioseparation in capillary electrochromatography (CEC). A HKUST-1 modified capillary was prepared and characterized by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectra, elemental analysis and thermogravimetric analysis. CEC-based enantioseparation of the basic drugs propranolol (PRO), esmolol (ESM), metoprolol (MET), amlodipine (AML) and sotalol (SOT) was performed by using carboxymethyl-ß-cyclodextrin as the chiral selector. Compared with a fused-silica capillary, the resolutions are improved (ESM: 1.79; MET: 1.80; PRO: 4.35; SOT: 1.91; AML: 2.65). The concentration of chiral selector, buffer pH value, applied voltage and buffer concentration were optimized, and the reproducibilities of the migration times and Rs values were evaluated. Graphical abstract Schematic presentation of the preparation of a HKUST-1@capillary for enantioseparation of racemic drugs. Cu(NO3)2 and 1,3,5-benzenetricarboxylic acid (BTC) were utilized to prepare the HKUST-1@capillary. Then the capillary was applied to construct capillary electrochromatography system with carboxymethyl-ß-cyclodextrin (CM-ß-CD) for separation of basic racemic drugs.

Comprehensive MS-based screening and identification of pharmaceutical transformation products formed during enzymatic conversion.

In this study, transformation products (TPs) of diclofenac, mefenamic acid, and sotalol derived from peroxidase- and laccase-catalyzed transformations were studied with different mass spectrometry (MS)-based workflows. A straightforward pre-screening of enzymatic degradation rate was performed using a robotic nano-ESI source coupled to single quadrupole MS. Accurate mass data and information on molecular hydrophobicity were obtained from a serial coupling of reversed phase liquid chromatography (RPLC) with hydrophilic interaction liquid chromatography (HILIC) to a time-of-flight-mass spectrometer (ToF-MS). These parameters were combined with fragmentation information from product ion scan operated in enhanced mode (EPI) with precursor selection in Q3 and data from multiple reaction monitoring (MRM) modes using a hybrid triple quadrupole-linear ion trap-mass spectrometer (QqQ/LIT-MS). "Suspect" MRM modes did not provide a significant sensitivity improvement compared to EPI experiments. The complementarity of the data from different MS-based workflows allowed for an increase of identification confidence. Overall, this study demonstrated that dimerization, hydroxylation, and dehydration reactions were the predominant mechanisms found for diclofenac and mefenamic acid during enzyme-catalyzed transformation, whereas a degradation product was observed for the peroxidase-catalyzed conversion of sotalol. Results can contribute to understand enzymatic mechanisms and provide a basis for assessing risks and benefits of enzyme-based remediation. Graphical abstract ᅟ.

Compatibility of Baclofen, Carvedilol, Hydrochlorothiazide, Mercaptopurine, Methadone Hydrochloride, Oseltamivir Phosphate, Phenobarbital, Propranolol Hydrochloride, Pyrazinamide, Sotalol Hydrochloride, Spironolactone, Tacrolimus Monohydrate, Ursodeoxycholic Acid, and Vancomycin Hydrochloride Oral Suspensions Compounded with SyrSpend SF pH4.

Compounded liquid medication is frequently required in children to allow easy dose adjustment and overcome swallowing difficulties. The objective of this study was to evaluate the stability of oral suspensions compounded with SyrSpend SF PH4 and the commonly used active pharmaceutical ingredients baclofen 2.0 mg/mL, carvedilol 5.0 mg/mL, hydrochlorothiazide 2.0 mg/mL, mercaptopurine 10.0 mg/mL, methadone hydrochloride 10.0 mg/mL, oseltamivir phosphate 6.0 mg/mL, phenobarbital 9.0 mg/mL and 15.0 mg/mL, propranolol hydrochloride 0.5 mg/mL and 5.0 mg/mL, pyrazinamide 100.0 mg/mL, spironolactone 2.0 mg/mL and 2.5 mg/mL, sotalol hydrochloride 5.0 mg/mL, tacrolimus monohydrate 0.5 mg/mL, ursodeoxycholic acid 20.0 mg/mL, and vancomycin hydrochloride 25.0 mg/mL. Suspensions were compounded with raw powders, except for mercaptopurine, pyrazinamide, and sotalol hydrochloride, which were made from commercial tablets. Stability was assessed by measuring the percentage recovery at 0 (baseline), 60 days, and 90 days after compounding for suspensions made with raw powders, which were stored at 2ÅãC to 8ÅãC. The stability of tablets, which were stored at 2ÅãC to 8ÅãC and 20ÅãC to 25ÅãC, was assessed by measuring the percentage recovery at 0 (baseline), 7 days, 14 days, 30 days, 60 days, and 90 days. Active pharmaceutical ingredients quantification was performed by ultraviolet high-performance liquid chromatography via a stability-indicating method. Given the percentage of recovery of the active pharmaceutical ingredients within the suspensions, the beyond-use date of the final products (active pharmaceutical ingredients + vehicle) was at least 90 days for all suspensions in the conditions tested. This suggests that SyrSpend SF PH4 is suitable for compounding active pharmaceutical ingredients from different pharmacological classes.

Box-Behnken response surface modeling assisted enantiomeric resolution of some racemic ß-blockers using HPTLC and ß-cyclodextrin as chiral mobile phase additive: Application to check the enantiomeric purity of betaxolol.

Stereospecific separation method of (±) betaxolol, (±) carvedilol, and (±) sotalol using High Performance Thin Layer Chromatography (HPTLC) and ß-cyclodextrin as chiral selector has been developed and validated. The Box-Behnken surface response design was selected for optimizing the operating variables based on 15 trials design. The optimized method involves separation on Fluka HPTLC silica gel plates 60 F254 (20 × 10 cm) using acetonitrile-methanol-acetic acid-water (3.4:3.6:0.18:1 v/v) as a mobile phase containing 0.57 mM ß-cyclodextrin. Densitometric measurements were made at 220 nm for betaxolol and sotalol or at 245 nm for carvedilol. Maximum separation of the enantiomers of the three drugs was obtained by optimizing concentration of chiral selector, the mobile phase composition including acetonitrile amount in the organic part of the mobile phase and the volume of acetic acid added. The proposed method enables estimation of (-) and (+) enantiomers of betaxolol in drug substance and in various pharmaceuticals. The detection limit of betaxolol was 0.15 and 0.13 µg band-1 for (-) and (+) enantiomers, respectively. The detection limits were found to be 0.2 and 0.3 µg band-1 for carvedilol and sotalol, respectively, as racemate. In addition, the proposed method was applied in checking the enantiomeric purity of (-) BET in the presence of (+) BET at 1% level where the inactive (+) enantiomer was quantified with good accuracy and precision at 1% level in the active (-) enantiomer.

The fate of sotalol in aqueous chlorination: Kinetics, mechanisms and ecotoxicity assessment.

Unmetabolized pharmaceuticals often enter the water treatment plants and exposed to various treatment processes. Among these water treatment processes, disinfection is a process which involves the application of chemical oxidation to remove pathogen. Untreated pharmaceuticals from primary and secondary treatment have the potential to be exposed to the chemical oxidation process during disinfection. This study investigated the kinetics and mechanism of the degradation of sotalol during chlorination process. Chlorination with hypochlorous acid (HOCl) as main reactive oxidant has been known as one of the most commonly used disinfection methods. The second order rate constant for the reaction between sotalol and free available chlorine (FAC) was found to decrease from 60.1 to 39.1M-1min-1 when the pH was increased from 6 to 8. This result was mainly attributed by the decreased of HOCl concentration with increasing pH. In the real water samples, the presence of the higher amount of organic content was found to reduce the efficiency of chlorination in the removal of sotalol. This result showed that sotalol competes with natural organic matter to react with HOCl during chlorination. After 24h of FAC exposure, sotalol was found to produce three stable transformation by-products. These by-products are mainly chlorinated compounds. According to the acute and chronic toxicity calculated using ECOSAR computer program, the transformation by-products are more harmful than sotalol.

Mass spectrometry based in vitro assay investigations on the transformation of pharmaceutical compounds by oxidative enzymes.

The ubiquitous presence of trace organic chemicals in wastewater and surface water leads to a growing demand for novel removal technologies. The use of isolated enzymes has been shown to possess the capability for a targeted application but requires a clearer mechanistic understanding. In this study, the potential of peroxidase from horseradish (HRP) and laccase from Pleurotus ostreatus (LccPO) to transform selected trace organic chemicals was studied using mass spectrometry (MS)-based in vitro enzyme assays. Conversion by HRP appeared to be more efficient compared to LccPO. Diclofenac (DCF) and sotalol (STL) were completely transformed by HRP after 4 h and immediate conversion was observed for acetaminophen (APAP). During treatment with LccPO, 60% of DCF was still detectable after 24 h and no conversion was found for STL. APAP was completely transformed after 20 min. Sulfamethoxazole (SMX), carbamazepine (CBZ), ibuprofen (IBP) and naproxen (NAP) were insusceptible to enzymatic conversion. In pharmaceutical mixtures, HRP exhibited a preference for DCF and APAP and the generally less efficient conversion of STL was enhanced in presence of APAP. Transformation product pattern after treatment with HRP revealed polymerization products for DCF while STL showed cleavage reactions. DCF product formation shifted towards a proposed dimeric iminoquinone product in presence of APAP whereas a generally less pronounced product formation in mixtures was observed for STL. In conclusion, the enzymatic treatment approach worked selectively and efficiently for a few pharmaceuticals. However, for application the investigation and possibly immobilization of multiplex enzymes being able to transform diverse chemical structures is recommended.

Effects of excipients and curing process on the abuse deterrent properties of directly compressed tablets.

The objective of the present investigation was to understand the effects of excipients and curing process on the abuse deterrent properties (ADP) of Polyox™ based directly compressible abuse deterrent tablet formulations (ADFs). The excipients investigated were lactose (monohydrate or anhydrous), microcrystalline cellulose and hydroxypropyl methylcellulose. The ADPs studied were tablet crush resistance or hardness, particle size distribution following mechanical manipulation, drug extraction in water and alcohol, syringeability and injectability. Other non-ADPs such as surface morphology and tablet dissolution were also studied. It was found that presence of 50% or more of water soluble or swellable excipient in the ADF tablets significantly affected the tablet hardness, particle size distribution following mechanical manipulation and drug extraction while small amount (5%) of excipients had either minimal or no effect on ADPs of these tablets. Addition of high molecular weight HPMC (K 100M) affected syringeability and injectability of ADF. Curing process was found to affect ADPs (hardness, particle size distribution, drug extraction and syringeability and injectability) when compared with uncured tablet. In conclusion, addition of large amount of excipients, especially water soluble ones in Polyox™ based ADF tablets increase the risk of abuse by various routes of administration.

Assessing impact of formulation and process variables on in-vitro performance of directly compressed abuse deterrent formulations.

Prescription drug products abuse/misuse is epidemic in United States. Opioids drug forms major portion of prescription drug product abuse. Abuse deterrence formulation (ADF) is one of the many approaches taken by sponsors to tackle this problem. It involves formulating opioids into dosage forms that will be difficult to abuse/misuse. Current investigation focused on evaluating the abuse deterrent properties (ADP) of ADF manufactured by direct compression method. Effect of process and formulation variables on ADP was investigated by statistical design of experiment (fractional factorial design). Independent factors studied were molecular weight of polyethylene oxide (Polyox™), curing time, temperature and method, and antioxidant type. Sotalol hydrochloride was selected as a model drug. ADP investigated were hardness/crush resistance, syringeability and injectability, physical manipulation (reduction into powder) and drug extraction in water and alcohol. Hardness and syringeability are evaluated by newly developed quantitative procedure. Other properties were also investigated such as morphology, crystallinity, assay and dissolution. The hardness and drug extraction was significantly (p<0.05) affected by curing temperature. Formulations could be powdered in 3 min irrespective of their hardness. Syringeability and injectability were intrinsic properties of the polymer used in the formulation, and were not affected by the investigated factors. Crystallinity of the polymer and drug changed, and was dependent upon curing temperature and time. The dissolution and assay were independent of formulation and process parameters studied. In conclusion, the study indicated some advantages of ADF product compared to non-ADF prepared by direct compression. However, the ADF should not be viewed as abuse proof product rather as incrementally improved product.

Risk based in vitro performance assessment of extended release abuse deterrent formulations.

High strength extended release opioid products, which are indispensable tools in the management of pain, are associated with serious risks of unintentional and potentially fatal overdose, as well as of misuse and abuse that might lead to addiction. The issue of drug abuse becomes increasingly prominent when the dosage forms can be readily manipulated to release a high amount of opioid or to extract the drug in certain products or solvents. One approach to deter opioid drug abuse is by providing novel abuse deterrent formulations (ADF), with properties that may be viewed as barriers to abuse of the product. However, unlike regular extended release formulations, assessment of ADF technologies are challenging, in part due to the great variety of formulation designs available to achieve deterrence of abuse by oral, parenteral, nasal and respiratory routes. With limited prior history or literature information, and lack of compendial standards, evaluation and regulatory approval of these novel drug products become increasingly difficult. The present article describes a risk-based standardized in-vitro approach that can be utilized in general evaluation of abuse deterrent features for all ADF products.

A comprehensive study of the enantioseparation of chiral drugs by cyclodextrin using capillary electrophoresis combined with theoretical approaches.

Four chiral drugs were enantioseparated by native beta-cyclodextrin (ß-CD) and negatively charged carboxymethyl-beta-cyclodextrin (CM-ß-CD) using capillary electrophoresis coupled with electrochemiluminescence detection (CE-ECL). Using 50 mM pH 5.5 Tris-H3PO4 with 10 mM CM-ß-CD as a running buffer, high resolution efficiency could be obtained. With the help of isothermal titration calorimetry (ITC), nuclear magnetic resonance (NMR) and molecular modeling, the chiral recognition mechanism was comprehensively investigated. Thermodynamic parameters data from ITC revealed that CM-ß-CD exhibited stronger binding affinity with analytes than ß-CD, and that the driving forces of CM-ß-CD responsible for chiral recognition were mainly electrostatic interactions between negatively charged CM-ß-CD and positively charged analytes. In addition, from both a macroscopic and microscopic point of view, the results of NMR and molecular modeling investigation adequately confirm the conclusion by comparing the stereochemical structures of complexes. Combination of ITC, NMR and molecular modeling techniques not only can assist CE to investigate the chiral discrimination mechanism, but also can predict and guide CE enantioseparation efficiency conversely.

Pharmacometabolomic approach to predict QT prolongation in guinea pigs.

Drug-induced torsades de pointes (TdP), a life-threatening arrhythmia associated with prolongation of the QT interval, has been a significant reason for withdrawal of several medicines from the market. Prolongation of the QT interval is considered as the best biomarker for predicting the torsadogenic risk of a new chemical entity. Because of the difficulty assessing the risk for TdP during drug development, we evaluated the metabolic phenotype for predicting QT prolongation induced by sparfloxacin, and elucidated the metabolic pathway related to the QT prolongation. We performed electrocardiography analysis and liquid chromatography-mass spectroscopy-based metabolic profiling of plasma samples obtained from 15 guinea pigs after administration of sparfloxacin at doses of 33.3, 100, and 300 mg/kg. Principal component analysis and partial least squares modelling were conducted to select the metabolites that substantially contributed to the prediction of QT prolongation. QTc increased significantly with increasing dose (r = 0.93). From the PLS analysis, the key metabolites that showed the highest variable importance in the projection values (>1.5) were selected, identified, and used to determine the metabolic network. In particular, cytidine-5'-diphosphate (CDP), deoxycorticosterone, L-aspartic acid and stearic acid were found to be final metabolomic phenotypes for the prediction of QT prolongation. Metabolomic phenotypes for predicting drug-induced QT prolongation of sparfloxacin were developed and can be applied to cardiac toxicity screening of other drugs. In addition, this integrative pharmacometabolomic approach would serve as a good tool for predicting pharmacodynamic or toxicological effects caused by changes in dose.

Excimer formation in inclusion complexes of ß-cyclodextrin with salbutamol, sotalol and atenolol: spectral and molecular modeling studies.

The inclusion complexation behavior of salbutamol, sotalol and atenolol drugs with ß-cyclodextrin (ß-CD) were investigated by UV-visible, fluorometry, time resolved fluorescence, FT-IR, (1)H NMR, SEM and PM3 methods. The above drugs gave a single emission maximum in water where as dual emission in ß-CD. In ß-CD solutions the shorter wavelength fluorescence intensity was regularly decreased and longer wavelength fluorescence intensity increased. Addition of ß-CD to aqueous solutions of drugs resulted into excimer emission. The excimer emission is concluded to be due to a 1:2 inclusion complex between ß-CD and drug. Nanosecond time-resolved studies indicated that all drugs exhibited biexponential decay in solvents and triexponential decay in CD. Investigations of thermodynamic and electronic properties confirmed the stability of the inclusion complex.

Pharmacophore modeling for hERG channel facilitation.

Human ether-a-go-go-related gene (hERG) channels play a critical role in cardiac action potential repolarization. The unintended block of hERG channels by compounds can prolong the cardiac action potential duration and induce arrhythmia. Several compounds not only block hERG channels but also enhance channel activation after the application of a depolarizing voltage step. This is referred to as facilitation. In this study, we tried to extract the property of compounds that induce hERG channel facilitation. We first examined the facilitation effects of structurally diverse hERG channel blockers in Xenopus oocytes. Ten of 13 assayed compounds allowed facilitation, suggesting that it is an effect common to most hERG channel blockers. We constructed a pharmacophore model for hERG channel facilitation. The model consisted of one positively ionizable feature and three hydrophobic features. Verification experiments suggest that the model well describes the structure-activity relationship for facilitation. Comparison of the pharmacophore for facilitation with that for hERG channel block showed that the spatial arrangement of features is clearly different. It is therefore conceivable that two different interactions of a compound with hERG channels exert two pharmacological effects, block and facilitation.

Occurrence and removal of pharmaceuticals and hormones through drinking water treatment.

The occurrence of fifty-five pharmaceuticals, hormones and metabolites in raw waters used for drinking water production and their removal through a drinking water treatment were studied. Thirty-five out of fifty-five drugs were detected in the raw water at the facility intake with concentrations up to 1200 ng/L. The behavior of the compounds was studied at each step: prechlorination, coagulation, sand filtration, ozonation, granular activated carbon filtration and post-chlorination; showing that the complete treatment accounted for the complete removal of all the compounds detected in raw waters except for five of them. Phenytoin, atenolol and hydrochlorothiazide were the three pharmaceuticals most frequently found in finished waters at concentrations about 10 ng/L. Sotalol and carbamazepine epoxide were found in less than a half of the samples at lower concentrations, above 2 ng/L. However despite their persistence, the removals of these five pharmaceuticals were higher than 95%.

Electrochemically modulated liquid-liquid extraction of ionized drugs under physiological conditions.

Electrochemically modulated liquid-liquid extraction (EMLLE) enables the selective extraction and separation of ions from mixtures by choice of an applied interfacial potential difference. The extraction of ionized drugs from artificial urine is reported in this paper. The artificial urine matrix was characterized by cyclic voltammetry at the interface between two immiscible electrolyte solutions (ITIES), showing that components of that aqueous phase truncate the available potential window at the ITIES. The transfer of three cationic drugs from aqueous artificial urine to the 1,2-dichloroethane organic electrolyte phase was examined. Both propranolol and timolol were found to transfer across the artificial urine-organic interface. However, sotalol transfer was not possible within the available potential window. Extraction of propranolol and timolol from artificial urine into an organogel phase, by electrochemically modulated liquid-liquid extraction, was examined. The application of potentials positive of the drugs' formal transfer potentials enabled the selective extraction of both propranolol and timolol, with a higher potential being required for timolol. This work demonstrates the practical utility of EMLLE for the selective extraction of target compounds from a complex sample matrix.

Simultaneous determination of ten antiarrhythic drugs and a metabolite in human plasma by liquid chromatography--tandem mass spectrometry.

A simple, accurate and selective LC-MS/MS method was developed and validated for simultaneous quantification of ten antiarrhythic drugs (diltiazem, amiodarone, mexiletine, propranolol, sotalol, verapamil, bisoprolol, metoprolol, atenolol, carvedilol) and a metabolite (norverapamil) in human plasma. Plasma samples were simply pretreated with acetonitrile for deproteinization. Chromatographic separation was performed on a Capcell C(18) column (50mmx2.0mm, 5microm) using a gradient mixture of acetonitrile and water (both containing 0.02% formic acid) as a mobile phase at flow rate of 0.3ml/min. The analytes were protonated in the positive electrospray ionization (ESI) interface and detected in multiple reaction monitoring (MRM) mode. Calibration curves were linear over wide ranges from sub- to over-therapeutic concentration in plasma for all analytes. Intra- and inter-batch precision of analysis was <12.0%, accuracy ranged from 90% to 110%, average recovery from 85.0% to 99.7%. The validated method was successfully applied to therapeutic drug monitoring (TDM) of antiarrhythic drugs in routine clinical practice.

Stability of sotalol in two liquid formulations at two temperatures.

BACKGROUND: Sotalol is used in certain pediatric patients to treat, suppress, or prevent the recurrence of life-threatening ventricular arrhythmias. However, it is commercially unavailable in a liquid dosage form. The use of an extemporaneously prepared liquid dosage form must be supported by the documentation of the chemical and physical stability of sotalol. OBJECTIVE: To determine the stability of sotalol hydrochloride extemporaneously prepared from tablets in 2 oral suspensions stored at 2 temperatures. METHODS: Five bottles contained Ora Plus:Ora Sweet (1:1) and the other 5 bottles had 1% methylcellulose:simple syrup NF (1:9), with a sotalol concentration of 5 mg/mL. Three samples were collected from each bottle at 0, 7, 14, 28, 42, 56, 70, and 91 days and analyzed by a stability-indicating HPLC analytical method (n = 15). RESULTS: At 4 degrees C, the mean concentration of sotalol was at least 98.9% of the original concentration in Ora Plus:Ora Sweet suspension and 95.5% of the initial concentration in 1% methylcellulose:simple syrup during storage for 3 months. At 25 degrees C, the mean concentration of sotalol was >/=95.5% of the original concentration in Ora Plus:Ora Sweet suspension and 94.4% of the initial concentration in 1% methylcellulose:simple syrup during storage for 3 months. The pH did not change substantially during the study period. Further, no changes in physical appearance were seen during the study. CONCLUSIONS: Sotalol hydrochloride can be prepared in either of 2 liquid dosage forms and stored in plastic bottles for 13 weeks at 4 or 25 degrees C without substantial loss of potency.

Kinetic disposition of (+)-S- and (-)-R-sotalol enantiomers in cardiac patients with tachyarrhythmias using an improved HPLC-fluorescence stereoselective method.

Since the enantioselective pharmacokinetic profiles of R,S-sotalol in cardiac patients are controversial, the present investigation aimed to study the kinetic disposition of sotalol enantiomers in patients with tachycardia. Thirteen cardiac patients, who gave their written consent, were included (6F/7M; 53 +/- 12 yrs, 66 +/- 13 kg, 163 +/- 8 cm height). They had tachycardia, normal renal function and had been chronically treated with tablets of sotalol 160 mg b.i.d. The patients were submitted to blood samples collection at zero, 0.5, 1, 1.5, 2, 3, 4, 6, 8, 10 and 12 h after drug administration. The quantitation of sotalol enantiomers were performed by a stereoselective HPLC method with fluorescence detection previously published. A one open compartment model was applied and the main pharmacokinetic parameters obtained for R-/S-sotalol were, respectively (Mean +/- SD): CSSMAX = 1007 +/- 307/1040 +/- 340 ng/mL; TMAX = 1.82 +/- 0.6/1.83 +/- 0.6 h; AUCSST = 6959 +/- 2153/7388 +/- 2563 ng.h/mL; CISSr/F = 2.7 +/- 1.2/2.5 +/- 1.2 mL/min/kg and VdSS/F = 1.9 +/- 0.9/2.0 +/- 1.0 L/kg. The pharmacokinetic parameters of R,S-sotalol were within the published range and the kinetic parameters for the isomers were grouped as two independent samples and statistically compared. In conclusion, stereoselective pharmacokinetic for sotalol was not observed in cardiac arrhythmic patients, i.e., both R- and S-sotalol enantiomers have the same pharmacokinetic profile.