Whole-Cell Electron Tomography Analysis of Vacuole Biogenesis.

Vacuoles in plant cells are the most prominent organelles that harbor distinctive features, including lytic function, storage of proteins and sugars, balance of cell volume, and defense responses. Despite their dominant size and functional versatility, the nature and biogenesis of vacuoles in plants per se remain elusive and several models have been proposed. Recently, we used the whole-cell 3D electron tomography (ET) technique to study vacuole formation and distribution at nanometer resolution and demonstrated that small vacuoles are derived from multivesicular body maturation and fusion. Good sample preparation is a critical step to get high-quality electron tomography images. In this chapter, we provide detailed sample preparation methods for high-resolution ET in Arabidopsis thaliana root cells, including high-pressure freezing, subsequent freeze-substitution fixation, embedding, and serial sectioning.

High-Pressure Freezing and Low-Temperature Processing of Seeds for Electron Microscopy and Electron Tomography.

High-pressure freezing/freeze substitution has been used to preserve biological samples for ultrastructure study instead of chemical fixation. For most plant samples, the water content is too high and cannot be properly preserved during cryofixation. Additionally, the cell wall is a barrier that prevents the substitution of water with the resin. In this chapter, we will discuss modified high-pressure freezing and subsequent processing protocols based on our routinely used methodology for examining Arabidopsis seeds in transmission electron microscopy and electron tomography.

Imaging Bunyavirus Infections by Transmission Electron Microscopy: Conventional Sample Preparation vs High-Pressure Freezing and Freeze-Substitution.

Transmission electron microscopy significantly contributed to unveil the course of virus entry, replication, morphogenesis, and egress. For these studies, the most widely used approach is imaging ultrathin sections of virus-infected cells embedded in a plastic resin that is transparent to electrons. Before infiltration in a resin, cells must be processed to stabilize their components under the observation conditions in an electron microscope, such as high vacuum and irradiation with electrons. For conventional sample preparation, chemical fixation and dehydration are followed by infiltration in the resin and polymerization to produce a hard block that can be sectioned with an ultramicrotome. Another method that provides a superior preservation of cell components is high-pressure freezing (HPF) followed by freeze substitution (FS) before resin infiltration and polymerization. This chapter describes both procedures with cells infected with Bunyamwera virus (BUNV), a well characterized member of the Bunyavirales, and compares the morphological details of different viral structures imaged in the two types of samples. Advantages, disadvantages, and applications of conventional processing and HPF/FS are also presented and discussed.

How to apply the broad toolbox of correlative light and electron microscopy to address a specific biological question.

Correlative light and electron microscopy (CLEM) is an approach that combines the strength of multiple imaging techniques to obtain complementary information about a given specimen. The "toolbox" for CLEM is broad, making it sometimes difficult to choose an appropriate approach for a given biological question. In this chapter, we provide experimental details for three CLEM approaches that can help the interested reader in designing a personalized CLEM strategy for obtaining ultrastructural data by using transmission electron microscopy (TEM). First, we describe chemical fixation of cells grown on a solid support (broadest approach). Second, we apply high-pressure freezing/freeze substitution to describe cellular ultrastructure (cryo-immobilization approach). Third, we give a protocol for a ultrastructural labeling by immuno-electron microscopy (immuno-EM approach). In addition, we also describe how to overlay fluorescence and electron microscopy images, an approach that is applicable to each of the reported different CLEM strategies. Here we provide step-by step descriptions prior to discussing possible technical problems and variations of these three general schemes to suit different models or different biological questions. This chapter is written for electron microscopists that are new to CLEM and unsure how to begin. Therefore, our protocols are meant to provide basic information with further references that should help the reader get started with applying a tailored strategy for a specific CLEM experiment.

Rehydration of Freeze Substituted Brain Tissue for Pre-embedding Immunoelectron Microscopy.

Electron microscopy (EM) volume reconstruction is a powerful tool for investigating the fundamental structure of brain circuits, but the full potential of this technique is limited by the difficulty of integrating molecular information. High quality ultrastructural preservation is necessary for EM reconstruction, and intact, highly contrasted cell membranes are essential for following small neuronal processes through serial sections. Unfortunately, the antibody labeling methods used to identify most endogenous molecules result in compromised morphology, especially of membranes. Cryofixation can produce superior morphological preservation and has the additional advantage of allowing indefinite storage of valuable samples. We have developed a method based on cryofixation that allows sensitive immunolabeling of endogenous molecules, preserves excellent ultrastructure, and is compatible with high-contrast staining for serial EM reconstruction.

Imaging the Plant Cytoskeleton by High-Pressure Freezing and Electron Tomography.

Electron tomography (ET) imaging of high-pressure frozen/freeze-substituted samples provides a unique opportunity to study structural details of organelles and cytoskeletal arrays in plant cells. In this chapter, we discuss approaches for sample preparation by cryofixation at high pressure, freeze substitution, and resin embedding. We also include pipelines for data collection for electron tomography at ambient temperature, tomogram calculation, and segmentation.

High-Pressure Freezing Followed by Freeze Substitution: An Optimal Electron Microscope Technique to Study Golgi Apparatus Organization and Membrane Trafficking.

A major goal of structural biologists is to preserve samples as close to their living state as possible. High-pressure freezing (HPF) is a state-of-art technique that freezes the samples at high pressure (~2100 bar) and low temperature (-196 °C) within milliseconds. This ultrarapid fixation enables simultaneous immobilization of all cellular components and preserves the samples in a near-native state. This facilitates the study of dynamic processes in Golgi apparatus organization and membrane trafficking. The work in our laboratory shows that high-pressure freezing followed by freeze substitution (FS), the introduction of organic solvents at low temperature prior to plastic embedding, can better preserve the structure of Golgi apparatus and Golgi-associated vesicles. Here, we present a protocol for freezing monolayer cell cultures on sapphire disks followed by freeze substitution. We were able to use this protocol to successfully study Golgi organization and membrane trafficking in HeLa cells. The protocol gives decidedly better preservation of Golgi apparatus and associated vesicles than conventional chemically fixed preparation and as a plastic embedded preparation can be readily extended to 3D electron microscopy imaging through sequential block face-scanning electron microscopy. The 3D imaging of a multi-micron thick organelle such as the Golgi apparatus located near the cell nucleus is greatly facilitated relative to hydrated sample imaging techniques such as cryo-electron microscopy.

Preparation of Drosophila Tissues and Organs for Transmission Electron Microscopy.

Transmission electron microscopy (TEM) is the method of choice to image the ultrastructure of cells or tissues. TEM allows the visualization of molecular complexes up to an atomic resolution. Thus, TEM data have led to important conclusions about cellular processes and supported findings obtained by functional analyses. In this chapter, we describe the preparation of Drosophila tissues for TEM and provide reliable step-by-step protocols for applying classical chemical fixation or high-pressure freezing-freeze substitution (HPF-FS) to preserve cellular structures.

Ultrastructural examination of mouse kidney glomerular capillary loop by sandwich freezing and freeze-substitution.

Sandwich freezing is a method of rapid freezing by sandwiching specimens between two metal disks and has been used for observing exquisite the close-to-native ultrastructure of living yeast and bacteria. Recently, this method has been found to be useful for preserving cell images of glutaraldehyde-fixed animal and human tissues. In the present study, this method was applied to observe the fine structure of mouse glomerular capillary loops. Morphometry was then performed, and the results were compared with the data obtained by an in vivo cryotechnique, which may provide the closest ultrastructure to the native state of living tissue. The results show that the ultrastructure of glomerular capillary loops obtained by sandwich freezing-freeze-substitution after glutaraldehyde fixation was close to that of the ultrastructure obtained by in vivo cryotechnique not only in the quality of cell image but also in quantitative morphometry. They indicate that the ultrastructure obtained by sandwich freezing-freeze-substitution after glutaraldehyde fixation may more closely reflect the living state of cells and tissues than conventional chemical fixation and dehydration at room temperature and conventional rapid freezing-freeze-substitution of excised tissues without glutaraldehyde fixation. Sandwich freezing-freeze-substitution techniques should be used routinely as a standard method for observing the close-to-native ultrastructure of biological specimens.

High-Pressure Freezing and Transmission Electron Microscopy to Visualize the Ultrastructure of the C. auris Cell Wall.

Transmission electron microscopy (TEM) is the main technique used to study the ultrastructure of biological samples. Chemical fixation was considered the main method for preserving samples for TEM; however, it is a relatively slow method of fixation and can result in morphological alterations. Cryofixation using high-pressure freezing (HPF) overcomes the limitations of chemical fixation by preserving samples instantly. Here, we describe our HPF methods optimized for visualizing Candida auris at the ultrastructural level.

NPC Structure in Model Organisms: Transmission Electron Microscopy and Immunogold Labeling Using High-Pressure Freezing/Freeze Substitution of Yeast, Worms, and Plants.

The nuclear pore complex (NPC) is a large elaborate structure embedded within the nuclear envelope, and intimately linked to the cytoskeleton, nucleoskeleton, and chromatin. Many different cargoes pass through its central channel and along the membrane at its periphery. The NPC is dismantled and reassembly, fully or partially, every cell cycle. In post-mitotic cells it consists of a combination of hyper-stable and highly dynamic proteins. Because of its size, dynamics, heterogeneity and integration, it is not possible to understand its structure and molecular function by any one, or even several, methods. For decades, and to this day, thin section transmission electron microscopy (TEM) has been a central tool for understanding the NPC, its associations, dynamics and role in transport as it can uniquely answer questions concerning fine structural detail within a cellular context. Using immunogold labeling specific components can also be identified within the ultrastructural context. Model organisms such as Saccharomyces cerevisiae are also central to NPC studies but have not been used extensively in structural work. This is because the cell wall presents difficulties with structural preservation and processing for TEM. In recent years, high-pressure freezing and freeze substitution have overcome these problems, as well as opened up methods to combine immunogold labeling with detailed structural analysis. Other model organisms such as the worm Caenorhabditis elegans and the plant Arabidopsis thaliana have been underused for similar reasons, but with similar solutions, which we present here. There are also many advantages to using these methods, adapted for use in mammalian systems, due to the instant nature of the initial fixation, to capture rapid processes such as nuclear transport, and preservation of dynamic membranes.

Potassium permanganate is an excellent alternative to osmium tetroxide in freeze-substitution.

High-pressure freezing followed by freeze-substitution is a valuable method for ultrastructural analyses of resin-embedded biological samples. The visualization of lipid membranes is one of the most critical aspects of any ultrastructural study and can be especially challenging in high-pressure frozen specimens. Historically, osmium tetroxide has been the preferred fixative and staining agent for lipid-containing structures in freeze-substitution solutions. However, osmium tetroxide is not only a rare and expensive material, but also volatile and toxic. Here, we introduce the use of a combination of potassium permanganate, uranyl acetate, and water in acetone as complementing reagents during the freeze-substitution process. This mix imparts an intense en bloc stain to cellular ultrastructure and membranes, which makes poststaining superfluous and is well suited for block-face imaging. Thus, potassium permanganate can effectively replace osmium tetroxide in the freeze-substitution solution without sacrificing the quality of ultrastructural preservation.

Characterisation of early ultrastructural changes in the cerebral white matter of CADASIL small vessel disease using high-pressure freezing/freeze-substitution.

AIMS: The objective of this study was to elucidate the early white matter changes in CADASIL small vessel disease. METHODS: We used high-pressure freezing and freeze substitution (HPF/FS) in combination with high-resolution electron microscopy (EM), immunohistochemistry and confocal microscopy of brain specimens from control and CADASIL (TgNotch3R169C ) mice aged 4-15 months to study white matter lesions in the corpus callosum. RESULTS: We first optimised the HPF/FS protocol in which samples were chemically prefixed, frozen in a sample carrier filled with 20% polyvinylpyrrolidone and freeze-substituted in a cocktail of tannic acid, osmium tetroxide and uranyl acetate dissolved in acetone. EM analysis showed that CADASIL mice exhibit significant splitting of myelin layers and enlargement of the inner tongue of small calibre axons from the age of 6 months, then vesiculation of the inner tongue and myelin sheath thinning at 15 months of age. Immunohistochemistry revealed an increased number of oligodendrocyte precursor cells, although only in older mice, but no reduction in the number of mature oligodendrocytes at any age. The number of Iba1 positive microglial cells was increased in older but not in younger CADASIL mice, but the number of activated microglial cells (Iba1 and CD68 positive) was unchanged at any age. CONCLUSION: We conclude that early WM lesions in CADASIL affect first and foremost the myelin sheath and the inner tongue, suggestive of a primary myelin injury. We propose that those defects are consistent with a hypoxic/ischaemic mechanism.

Sandwich freezing device for rapid freezing of viruses, bacteria, yeast, cultured cells and animal and human tissues in electron microscopy.

We have been using sandwich freezing of living yeast and bacteria followed by freeze-substitution for observing close-to-native ultrastructure of cells. Recently, sandwich freezing of glutaraldehyde-fixed cultured cells and human tissues have been found to give excellent preservation of ultrastructure of cells and tissues. These studies, however, have been conducted using a handmade sandwich freezing device and have been limited in a few laboratories. To spread the use of this method to other laboratories, we fabricated and commercialized a new sandwich freezing device. The new device is inexpensive, portable and sterilizable. It can be used to rapid-freeze viruses, bacteria, yeast, cultured cells and animal and human tissues to a depth of 0.2 mm if tissues are prefixed with glutaraldehyde. The commercial availability of this device will expand application of rapid freezing to wide range of biological materials.

Preparation of Cultured Cells Using High-Pressure Freezing and Freeze Substitution for Subsequent 2D or 3D Visualization in the Transmission Electron Microscope.

Transmission electron microscopy (TEM) is an invaluable technique used for imaging the ultrastructure of samples, and it is particularly useful when determining virus-host interactions at a cellular level. The environment inside a TEM is not favorable for biological material (high vacuum and high energy electrons). Also biological samples have little or no intrinsic electron contrast and rarely do they naturally exist in very thin sheets, as is required for optimum resolution in the TEM. To prepare these samples for imaging in the TEM therefore requires extensive processing which can alter the ultrastructure of the material. Here we describe a method which aims to minimize preparation artifacts by freezing the samples at high pressure to instantaneously preserve ultrastructural detail, then rapidly substituting the ice with resin to provide a firm matrix which can be cut into thin sections for imaging. Thicker sections of this material can also be imaged and reconstructed into 3D volumes using electron tomography.

An optimized approach using cryofixation for high-resolution 3D analysis by FIB-SEM.

Compared with conventional two-dimensional transmission electron microscopy (TEM), focused ion beam scanning electron microscopy (FIB-SEM) can provide more comprehensive 3D information on cell substructures at the nanometer scale. Biological samples prepared by cryofixation using high-pressure freezing demonstrate optimal preservation of the morphology of cellular structures, as these are arrested instantly in their near-native states. However, samples from cryofixation often show a weak back-scatter electron signal and bad image contrast in FIB-SEM imaging. In addition, it is impossible to do large amounts of heavy metal staining. This is commonly achieved via established osmium impregnation (OTO) en bloc staining protocols. Here, we compared the FIB-SEM image quality of brain tissues prepared using several common freeze-substitution media, and we developed an approach that overcomes these limitations through a combination of osmium tetroxide, uranyl acetate, tannic acid, and potassium permanganate at proper concentrations, respectively. Using this optimized sample preparation protocol for high-pressure freezing and freeze-substitution, perfect smooth membrane morphology, even of the lipid bilayers of the cell membrane, was readily obtained using FIB-SEM. In addition, our protocol is broadly applicable and we demonstrated successful application to brain tissues, plant tissues, Caenorhabditis elegans, Candida albicans, and chlorella. This approach combines the potential of cryofixation for 3D large volume analysis of subcellular structures with the high-resolution capabilities of FIB-SEM.

The need to freeze-Dehydration during specimen preparation for electron microscopy collapses the endothelial glycocalyx regardless of fixation method.

OBJECTIVE: The endothelial glycocalyx covers the luminal surface of the endothelium and plays key roles in vascular function. Despite its biological importance, ideal visualization techniques are lacking. The current study aimed to improve the preservation and subsequent imaging quality of the endothelial glycocalyx. METHODS: In mice, the endothelial glycocalyx was contrasted with a mixture of lanthanum and dysprosium (LaDy). Standard chemical fixation was compared with high-pressure frozen specimens processed with freeze substitution. Also, isolated brain microvessels and cultured endothelial cells were high-pressure frozen and by transmission soft x-rays, imaged under cryogenic conditions. RESULTS: The endothelial glycocalyx was in some tissues significantly more voluminous from chemically fixed specimens compared with high-pressure frozen specimens. LaDy labeling introduced excessive absorption contrast, which impeded glycocalyx measurements in isolated brain microvessels when using transmission soft x-rays. In non-contrasted vessels, the glycocalyx was not resolved. LaDy-contrasted, cultured brain endothelial cells allowed to assess glycocalyx volume in vitro. CONCLUSIONS: Both chemical and cryogenic fixation followed by dehydration lead to substantial collapse of the glycocalyx. Cryogenic fixation without freeze substitution could be a way forward although transmission soft x-ray tomography based solely on amplitude contrast seems unsuitable.

The CryoAPEX Method for Electron Microscopy Analysis of Membrane Protein Localization Within Ultrastructurally-Preserved Cells.

Key cellular events like signal transduction and membrane trafficking rely on proper protein location within cellular compartments. Understanding precise subcellular localization of proteins is thus important for answering many biological questions. The quest for a robust label to identify protein localization combined with adequate cellular preservation and staining has been historically challenging. Recent advances in electron microscopy (EM) imaging have led to the development of many methods and strategies to increase cellular preservation and label target proteins. A relatively new peroxidase-based genetic tag, APEX2, is a promising leader in cloneable EM-active tags. Sample preparation for transmission electron microscopy (TEM) has also advanced in recent years with the advent of cryofixation by high pressure freezing (HPF) and low-temperature dehydration and staining via freeze substitution (FS). HPF and FS provide excellent preservation of cellular ultrastructure for TEM imaging, second only to direct cryo-imaging of vitreous samples. Here we present a protocol for the cryoAPEX method, which combines the use of the APEX2 tag with HPF and FS. In this protocol, a protein of interest is tagged with APEX2, followed by chemical fixation and the peroxidase reaction. In place of traditional staining and alcohol dehydration at room temperature, the sample is cryofixed and undergoes dehydration and staining at low temperature via FS. Using cryoAPEX, not only can a protein of interest be identified within subcellular compartments, but also additional information can be resolved with respect to its topology within a structurally preserved membrane. We show that this method can provide high enough resolution to decipher protein distribution patterns within an organelle lumen, and to distinguish the compartmentalization of a protein within one organelle in close proximity to other unlabeled organelles. Further, cryoAPEX is procedurally straightforward and amenable to cells grown in tissue culture. It is no more technically challenging than typical cryofixation and freeze substitution methods. CryoAPEX is widely applicable for TEM analysis of any membrane protein that can be genetically tagged.

High-pressure freezing followed by freeze substitution of a complex and variable density miniorgan: the wool follicle.

Cryofixation by high-pressure freezing (HPF) followed by freeze substitution (FS) is a preferred method to prepare biological specimens for ultrastructural studies. It has been shown to achieve uniform vitrification and ultrastructure preservation of complex structures in different cell types. One limitation of HPF is the small sample volume of <200 µm thickness and about 2000 µm across. A wool follicle is a rare intact organ in a single sample about 200 µm thick. Within each follicle, specialized cells derived from multiple cell lineages assemble, mature and cornify to make a wool fibre, which contains 95% keratin and associated proteins. In addition to their complex structure, large density changes occur during wool fibre development. Limited water movement and accessibility of fixatives are some issues that negatively affect the preservation of the follicle ultrastructure via conventional chemical processing. Here, we show that HPF-FS of wool follicles can yield high-quality tissue preservation for ultrastructural studies using transmission electron microscopy.

Connective Tissue Ultrastructure: A Direct Comparison between Conventional Specimen Preparation and High-Pressure Freezing/Freeze-Substitution.

It is generally agreed within the microscopy community that the quality of ultrastructure within the connective tissue matrix resulting from high-pressure freezing followed by freeze-substitution (HPF/FS) far exceeds that gained following the "conventional" preparation method, which includes aqueous fixation, dehydration, and embedding. Exposure to cryogen at high pressure is the only cryopreservation method capable of vitrifying tissue structure to a depth exceeding 200 µm. Cells within connective tissues prepared by HPF/FS are universally larger, filling the commonly seen void at the juncture between cell and matrix. Without significant shrinkage of cells and the coincident extraction of the cytosolic components, well-resolved organelles are less clustered within an expanded cytosol. Much of the artifact from "conventional" methods occurs as large space filling and also smaller fibril-associated proteoglycans are extracted during fixation. However, the visualization of some matrix features by electron microscopy is actually dependent on the collapse or extraction of these "masking" components. Herein, we argue that an impression of ultrastructure within commonly studied matrices, in particular skin, is best gained following the evaluation of both conventional preparations and tissue prepared by HPF/FS. Anat Rec, 2019. © 2019 American Association for Anatomy.