Successful pregnancy with intracytoplasmic sperm injection after bacterial contamination of embryo culture in in vitro fertilization: a case report.

BACKGROUND: Bacterial infection of embryo culture medium is rare but may be detrimental. The main source of embryo culture contamination is semen. Assisted reproduction centers currently lack consensus regarding the methods for preventing and managing embryo culture infection. In our recent case, a successful pregnancy was achieved with intracytoplasmic sperm injection after failed conventional in vitro fertilization owing to bacterial contamination. CASE PRESENTATION: We present a case report of two consecutive in vitro fertilization-intracytoplasmic sperm injection cycles with photo and video documentation of the bacterial growth. A 36-year-old Hungarian woman and her 37-year-old Hungarian partner came to our department. They had two normal births followed by 2 years of infertility. The major causes of infertility were a closed fallopian tube and asthenozoospermia. Bacterial infection of the embryo culture medium was observed during in vitro fertilization and all oocytes degenerated. The source was found to be the semen. To prevent contamination, intracytoplasmic sperm injection was used for fertilization in the subsequent cycle. Intracytoplasmic bacterial proliferation was observed in one of the three fertilized eggs, but two good-quality embryos were successfully obtained. The transfer of one embryo resulted in a successful pregnancy and a healthy newborn was delivered. CONCLUSION: Intracytoplasmic sperm injection may be offered to couples who fail conventional in vitro fertilization treatment owing to bacteriospermia, as it seems to prevent infection of the embryo culture. Even if bacterial contamination appears, our case encourages us to continue treatment. Nevertheless, the development of new management guidelines for the prevention and management of bacterial contamination is essential.

Individually Cultured Bovine Zygotes Successfully Develop to the Blastocyst Stage in an Extremely Confined Environment.

The possibility of detecting the developmental competence of individually cultured embryos through analysis of spent media is a major current trend in an ART setting. However, individual embryo culture is detrimental compared with high-density group culture due to the reduced concentration of putative embryotropins. The main aim of this study was to identify an individual culture system that is not detrimental over high-density group culture in the bovine model. Blastocyst rates and competence were investigated in a conventional (GC) group, semi-confined group (MG), and individual culture (MS) in a commercial microwell device. Main findings showed that: (1) individual embryos can be continuously cultured for 7 days in ~70 nL microwells (MS) without detrimental effects compared with the GC and MG; (2) MS and MG blastocysts had a reduced number of TUNEL-positive cells compared to GC blastocysts; (3) though blastocyst mean cell numbers, mitochondrial activity, and lipid content were not different among the three culture conditions, MS blastocysts had a higher frequency of small-sized lipid droplets and a reduced mean droplet diameter compared with GC and MG blastocysts. Overall, findings open the way to optimize the development and competence of single embryos in an ART setting.

A compact, high-throughput semi-automated embryo vitrification system based on hydrogel.

RESEARCH QUESTION: What is the efficiency and efficacy of the novel Biorocks semi-automated vitrification system, which is based on a hydrogel? DESIGN: This comparative experimental laboratory study used mouse model and human day 6 blastocysts. Mouse oocytes and embryos were quality assessed post-vitrification. RESULTS: The Biorocks system successfully automated the solution exchanges during the vitrification process, achieving a significantly improved throughput of up to 36 embryos/oocytes per hour. Using hydrogel for cryoprotective agent delivery, 12 vessels could be processed simultaneously, fitting comfortably within an assisted reproductive technology (ART) workstation. In tests involving the cryopreservation of oocytes and embryos, the system yielded outcomes equivalent to the manual Cryotop method. For example, the survival rate for mouse oocytes was 98% with the Biorocks vitrification system (n = 46) and 95% for the manual Cryotop method (n = 39), of which 46% and 41%, respectively, progressed to blastocysts on day 5 after IVF. CC-grade day 6 human blastocysts processed with the Biorocks system (n = 39) were associated with a 92% 2 h re-expansion rate, equivalent to the 90% with Cryotop (n = 30). The cooling/warming rates achieved by the Biorocks system were 31,900°C/minute and 24,700°C/minute, respectively. Oocyte quality was comparable or better post-vitrification for Biorocks than Cryotop. CONCLUSIONS: The Biorocks semi-automated vitrification system offers enhanced throughput without compromising the survival and developmental potential of oocytes and embryos. This innovative system may help to increase the efficiency and standardization of vitrification in ART clinics. Further investigations are needed to confirm its efficacy in a broader clinical context.

Influence of the storage conditions of embryo culture media on mouse development.

The culture of preimplantation embryos in vitro is an important method for human and mouse reproductive technology. This study aims to investigate the influence of different conditions of culture media on the preimplantation stage of mouse embryos cultured in vitro, and monitor the post-implantation development of new mice after embryo transfer to surrogate females. We demonstrated here that mouse embryos cultured in vitro in fresh M16, KSOM, Global, and HTF embryo culture media from one cell to the blastocyst stage and the subsequent embryo transfer to surrogate females are able to proceed through post-implantation development and, after birth, develop into healthy mice. However, culture of embryos in differently aged media shows various (often unpredictable) results. To find the optimal storage conditions of culture media, we suggest that the freezing and long-term storage of these media at - 80°C will not influence the quality of the media. To test this hypothesis, we grew embryos from one cell to blastocysts in vitro in the selected media after thawing and subsequently transferring them to surrogate females. Embryo culture in these four media after thawing does not affect preimplantation and postnatal mouse development. Thus, we have shown that storage of embryo culture media at low temperature (- 80°C) does not impact the quality of the media, and subsequently, it can be used for the culture of embryos for the full preimplantation period, the same as in fresh media.

In silico-designed vitrification protocols: an approach to improve survival of in vitro produced-bovine embryos.

In brief: In silico predictions validated in this study demonstrate the potential for designing shorter equilibration protocols that improve post-warming re-expansion and hatching rates of D7 and D8 in vitro-produced bovine embryos. Our results benefit the livestock industry by providing a refined and reproducible approach to cryopreserving bovine embryos, which, in addition, could be useful for other mammalian species. Abstract: The cryopreservation of in vitro-produced (IVP) embryos is vital in the cattle industry for genetic selection and crossbreeding programs. Despite its importance, there is no standardized protocol yielding pregnancy rates comparable to fresh embryos. Current approaches often neglect the osmotic tolerance responses to cryoprotectants based on temperature and time. Hereby, we propose improved vitrification methods using shorter dehydration-based protocols. Blastocysts cultured for 7 (D7) or 8 days (D8) were exposed to standard equilibration solution (ES) at 25ºC and 38.5ºC. Optimized exposure times for each temperature and their impact on post-warming re-expansion, hatching rates, cell counts, and apoptosis rate were determined. In silico predictions aligned with in vitro observations, showing original volume recovery within 8 min 30 s at 25ºC or 3 min 40 s at 38.5ºC (D7 blastocysts) and 4 min 25 s at 25ºC and 3 min 15 s at 38.5ºC (D8 blastocysts) after exposure to ES. Vitrification at 38.5ºC resulted in D7 blastocysts re-expansion and hatching rates (93.1% and 38.1%, respectively) comparable to fresh embryos (100.0% and 32.4%, respectively), outperforming the 25ºC protocol (86.2% and 24.4%, respectively; P < 0.05). No differences were observed between D7 and D8 blastocysts using the 38.5ºC protocol. Total cell number was maintained for D7 and D8 blastocysts vitrified at 38.5ºC but decreased at 25ºC (P < 0.05). Apoptosis rates increased post-warming (P < 0.05), except for D8 blastocysts vitrified at 38.5ºC, resembling fresh controls. In conclusion, based on biophysical permeability data, new ES incubation times of 3 min 40 s for D7 blastocysts and 3 min 15 s for D8 blastocysts at 38.5ºC were validated for optimizing vitrification/warming methods for bovine IVP blastocysts.

A novel machine-learning framework based on early embryo morphokinetics identifies a feature signature associated with blastocyst development.

BACKGROUND: Artificial Intelligence entails the application of computer algorithms to the huge and heterogeneous amount of morphodynamic data produced by Time-Lapse Technology. In this context, Machine Learning (ML) methods were developed in order to assist embryologists with automatized and objective predictive models able to standardize human embryo assessment. In this study, we aimed at developing a novel ML-based strategy to identify relevant patterns associated with the prediction of blastocyst development stage on day 5. METHODS: We retrospectively analysed the morphokinetics of 575 embryos obtained from 80 women who underwent IVF at our Unit. Embryo morphokinetics was registered using the Geri plus® time-lapse system. Overall, 30 clinical, morphological and morphokinetic variables related to women and embryos were recorded and combined. Some embryos reached the expanded blastocyst stage on day 5 (BL Group, n = 210), some others did not (nBL Group, n = 365). RESULTS: The novel EmbryoMLSelection framework was developed following four-steps: Feature Selection, Rules Extraction, Rules Selection and Rules Evaluation. Six rules composed by a combination of 8 variables were finally selected, and provided a predictive power described by an AUC of 0.84 and an accuracy of 81%. CONCLUSIONS: We provided herein a new feature-signature able to identify with an high performance embryos with the best developmental competence to reach the expanded blastocyst stage on day 5. Clear and clinically relevant cut-offs were identified for each considered variable, providing an objective tool for early embryo developmental assessment.

Impact of Group vs Individual Embryo Culture Strategies on Blastocyst and Clinical Outcomes.

Embryo culture is one of the most important steps in an assisted reproduction laboratory. Embryos can be cultured individually, one embryo per media drop, or in groups, culturing several embryos in the same media drop. Due to the controversy generated on this subject, we wondered which embryo culture method would have the best results in terms of quality and blastocyst formation rate. We designed a prospective randomized study comparing two different embryo culture strategies: group and individual embryo culture. The data were obtained from 830 embryos from 103 egg donation treatments. The zygotes were randomized into two groups: individual culture (group 1) or group culture (group 2). The embryos were cultured in 35-µl drops until day 5 when they were classified morphologically. We observed a significant increase in the blastocyst formation rate and in the usable embryo rate in individual culture on day 5 compared to group culture. However, good embryo quality (A/B blastocysts), implantation, and pregnancy rates were similar regardless of the type of embryo-culture. As a conclusion, individual culture may increase blastocyst formation rate and may benefit embryo quality on day 5. Our results support previous reports suggesting that individual culture could improve embryo development.

The number of nuclei in compacted embryos, assessed by optical coherence microscopy, is a non-invasive and robust marker of mouse embryo quality.

Optical coherence microscopy (OCM) visualizes nuclei in live, unlabeled cells. As most cells are uninucleated, the number of nuclei in embryos may serve as a proxy of the cell number, providing important information on developmental status of the embryo. Importantly, no other non-invasive method currently allows for the cell number count in compacted embryos. We addressed the question of whether OCM, by providing the number of nuclei in compacted mouse embryos, may help evaluate embryo quality. We subjected compacted embryonic Day 3 (E3.0: 72 h after onset of insemination) mouse embryos to OCM scanning and correlated nuclei number and developmental potential. Implantation was assessed using an outgrowth assay (in vitro model meant to reflect embryonic ability to implant in vivo). Embryos with more cells at E3.0 (>18 cells) were more likely to reach the blastocyst stage by E4.0 and E5.0 (P ≪ 0.001) and initiate hatching by E5.0 (P < 0.05) than those with fewer cells (<12 cells). Moreover, the number of cells at E3.0 strongly correlated with the total number of cells in E4.0 and E5.0 embryos (ρ = 0.71, P ≪ 0.001 and ρ = 0.61, P ≪ 0.001, respectively), also when only E4.0 and E5.0 blastocysts were considered (ρ = 0.58, P ≪ 0.001 and ρ = 0.56, P ≪ 0.001, respectively). Additionally, we observed a strong correlation between the number of cells at E3.0 and the number of trophectoderm cells in E4.0 and E5.0 blastocysts (ρ = 0.59, P ≪ 0.001 and ρ = 0.57, P ≪ 0.001, respectively). Importantly, embryos that had more cells at E3.0 (>18 cells) were also more likely to implant in vitro than their counterparts with fewer cells (<12 cells; P ≪ 0.001). Finally, we tested the safety of OCM imaging, demonstrating that OCM scanning affected neither the amount of reactive oxygen species nor mitochondrial activity in the embryos. OCM also did not hinder their preimplantation development, ability to implant in vitro, or to develop to term after transfer to recipient females. Our data indicate that OCM imaging provides important information on embryo quality. As the method seems to be safe for embryos, it could be a valuable addition to the current repertoire of embryo evaluation methods. However, our study was conducted only on mouse embryos, so the proposed protocol would require optimization in order to be applied in other species.

Towards a more sustainable balance between optimal live birth rate and supernumerary embryos in ART treatments.

PURPOSE: To assess the relation between number of inseminated oocytes and cumulative live birth rate (CLBR) in order to provide guidance for limiting the number of surplus blastocysts. METHODS: The study was a retrospective, single-center cohort analysis of 1223 ART complete cycles. Cycles were stratified according to female age (≤ 34, 35-38, and 39-42 years) and number of inseminated oocytes (1-5, 6-10, and > 10). Inclusion criteria were indication for IVF/ICSI with own spermatozoa and blastocyst culture up to day 6 of all embryos. RESULTS: In patients younger than 35 years, insemination of more than ten oocytes produced an increase in overall blastocyst number, CLBR (40.3%, 54.3%, and 75.8%, respectively, for each oocyte group) and surplus embryo rate (12.9%, 27.8%, and 49.7% of cases for each group). Instead, in the middle age group, the use of more than ten oocytes was solely associated with an increase in the rate of surplus embryos (1.25%, 21.33%, and 28.68% of cases after stratification for oocyte number). In older patients, neither CLBR (9.1%, 23.9%, and 24.7%, respectively) nor rate of surplus embryos (2.0%, 7.1%, and 13.4% of cases for each group) were higher in cycles with more than ten inseminated oocytes. CONCLUSION: In women up to 38 years, sustainable CLBR are achieved while limiting the number of inseminated oocytes and the resulting blastocysts remaining unused. Based on this notion, novel treatment strategies could pursue high outcome rates, while alleviating the problems derived from surplus stored embryos.

Detrimental effects of electromagnetic radiation emitted from cell phone on embryo morphokinetics and blastocyst viability in mice.

Electromagnetic radiation (EMR) has deleterious effects on sperm motility and viability, as well as oocyte membrane and organelle structure. The aim was to assess the effects of cell phone radiation on preimplantation embryo morphokinetics and blastocyst viability in mice. For superovulation, 20 female mice were treated with intraperitoneal (IP) injections of 10 IU pregnant mare's serum gonadotropin (Folligon® PMSG), followed by 10 IU of human chorionic gonadotropin (hCG) after 48 h. The zygotes (n = 150) from the control group were incubated for 4 days. The experimental zygotes (n = 150) were exposed to a cell phone emitting EMR with a frequency range 900-1800 MHz for 30 min on day 1. Then, all embryos were cultured in the time-lapse system and annotated based on time points from the 2-cell stage (t2) to hatched blastocyst (tHDyz), as well as abnormal cleavage patterns. Blastocyst viability was assessed using Hoechst and propidium iodide staining. Significant increases (P < 0.05) were observed in the cleavage division time points of t2, t8, t10, and t12 of the experimental group compared with the controls. In terms of blastocyst formation parameters, a delay in embryo development was observed in the experimental group compared with the controls. Data analysis of the time intervals between the two groups showed a significant difference in the s3 time interval (P < 0.05). Also, the rates of fragmentation, reverse cleavage, vacuole formation, and embryo arrest were significantly higher in the experimental group (P < 0.05). Furthermore, the cell survival rate in the experimental group was lower than the control group (P < 0.05). Exposure to EMR has detrimental consequences for preimplantation embryo development in mice. These effects can manifest as defects in the cleavage stage and impaired blastocyst formation, leading to lower cell viability.

Diagnostic or prognostic? Decoding the role of embryo selection on in vitro fertilization treatment outcomes.

In this review, we take a fresh look at embryo assessment and selection methods from the perspective of diagnosis and prognosis. On the basis of a systematic search in the literature, we examined the evidence on the prognostic value of different embryo assessment methods, including morphological assessment, blastocyst culture, time-lapse imaging, artificial intelligence, and preimplantation genetic testing for aneuploidy.

A 3D "sandwich" co-culture system with vascular niche supports mouse embryo development from E3.5 to E7.5 in vitro.

BACKGROUND: Various methods for ex utero culture systems have been explored. However, limitations remain regarding the in vitro culture platforms used before implanting mouse embryos and the normal development of mouse blastocysts in vitro. Furthermore, vascular niche support during mouse embryo development from embryonic day (E) 3.5 to E7.5 is unknown in vitro. METHODS: This study established a three-dimensional (3D) "sandwich" vascular niche culture system with in vitro culture medium (IVCM) using human placenta perivascular stem cells (hPPSCs) and human umbilical vein endothelial cells (hUVECs) as supportive cells (which were seeded into the bottom layer of Matrigel) to test mouse embryos from E3.5 to E7.5 in vitro. The development rates and greatest diameters of mouse embryos from E3.5 to E7.5 were quantitatively determined using SPSS software statistics. Pluripotent markers and embryo transplantation were used to monitor mouse embryo quality and function in vivo. RESULTS: Embryos in the IVCM + Cells (hPPSCs + hUVECs) group showed higher development rates and greater diameters at each stage than those in the IVCM group. Embryos in the IVCM + Cells group cultured to E5.5 morphologically resembled natural egg cylinders and expressed specific embryonic cell markers, including Oct4 and Nanog. These features were similar to those of embryos developed in vivo. After transplantation, the embryos were re-implanted in the internal uterus and continued to develop to a particular stage. CONCLUSIONS: The 3D in vitro culture system enabled embryo development from E3.5 to E7.5, and the vascularization microenvironment constructed by Matrigel, hPPSCs, and hUVECs significantly promoted the development of implanted embryos. This system allowed us to further study the physical and molecular mechanisms of embryo implantation in vitro.

Evaluation of an automated dish preparation system for IVF and embryo culture using a mouse mode.

Manual dish preparation for IVF in human fertility clinics or animal laboratories heavily relies on embryologists' experience, which can lead to occupational illness due to long-term and monotonous operation. Therefore, introducing an automated technique to replace traditional methods is crucial for improving working efficiency and reducing work burden for embryologists. In the current study in the mouse, both manual and automated methods were used to prepare IVF or embryo culture dishes. A one-way analysis of variance was conducted to compare several factors, including preparation time, qualified rates, media osmolality of dishes, fertilization rates, and embryonic development to assess the efficiency and potential of automated preparation. The results showed that automation system significantly reduced the required time and increased the efficiencies and qualified rates of dish preparation, especially for embryo culture dishes, without significantly altering medium osmolalities. There were no significant differences between two preparations in fertilization rates and embryo development in mice. Thus, automated dish preparation can improve working efficiency and qualified rates while maintaining fertilization rates and subsequent embryonic development without compromising osmolality stability of medium. It presents a superior alternative to manual preparation, reducing the workload of embryologists and facilitating the standardization of operational procedures.

Culture conditions in the IVF laboratory: state of the ART and possible new directions.

In the last four decades, the assisted reproductive technology (ART) field has witnessed advances, resulting in improving pregnancy rates and diminishing complications, in particular reduced incidence of multiple births. These improvements are secondary to advanced knowledge on embryonic physiology and metabolism, resulting in the ability to design new and improved culture conditions. Indeed, the incubator represents only a surrogate of the oviduct and uterus, and the culture conditions are only imitating the physiological environment of the female reproductive tract. In vivo, the embryo travels through a dynamic and changing environment from the oviduct to the uterus, while in vitro, the embryo is cultured in a static fashion. Importantly, while culture media play a critical role in optimising embryo development, a large host of additional factors are equally important. Additional potential variables, including but not limited to pH, temperature, osmolality, gas concentrations and light exposure need to be carefully controlled to prevent stress and permit optimal implantation potential. This manuscript will provide an overview of how different current culture conditions may affect oocyte and embryo viability with particular focus on human literature.

Atypical initial cleavage patterns minimally impact rhesus macaque in vitro embryo morphokinetics and embryo outgrowth development†.

Embryo morphokinetic analysis through time-lapse embryo imaging is envisioned as a method to improve selection of developmentally competent embryos. Morphokinetic analysis could be utilized to evaluate the effects of experimental manipulation on pre-implantation embryo development. The objectives of this study were to establish a normative morphokinetic database for in vitro fertilized rhesus macaque embryos and to assess the impact of atypical initial cleavage patterns on subsequent embryo development and formation of embryo outgrowths. The cleavage pattern and the timing of embryo developmental events were annotated retrospectively for unmanipulated in vitro fertilized rhesus macaque blastocysts produced over four breeding seasons. Approximately 50% of the blastocysts analyzed had an abnormal early cleavage event. The time to the initiation of embryo compaction and the time to completion of hatching was significantly delayed in blastocysts with an abnormal early cleavage event compared to blastocysts that had cleaved normally. Embryo hatching, attachment to an extracellular matrix, and growth during the implantation stage in vitro was not impacted by the initial cleavage pattern. These data establish normative morphokinetic parameters for in vitro fertilized rhesus macaque embryos and suggest that cleavage anomalies may not impact embryo implantation rates following embryo transfer.

The effect of amorphous calcium carbonate as a culture media supplement on embryonic development of murine sibling embryos.

PURPOSE: The aim of this study was to compare the addition in culture media of stabilized amorphous calcium carbonate (ACC) versus calcium chloride (CaCl2) or calcium carbonate in crystalline form (CCC) on growth rates among sibling mouse embryos. METHODS: We evaluated the effect of different ACC concentrations on the rates of embryo compaction at 60 h, blastocyst rate at 84 h and percentage of fully hatched at 108 h following hCG injection. As ACC is stabilized by tripolyphosphate (TPP), we also evaluated the addition of TPP alone to the culture media. Finally, we compared supplemented ACC culture media to one-step SAGE and Irvine cleavage media. RESULTS: The results revealed that ACC accelerates the compaction and blastocyst rates, as well as the percentage of fully hatched embryos in a dose-dependent manner, with an increased positive effect at 2.5 mM. The magnitude of the effect for ACC-supplemented media on the embryo developmental rate was between 30 to 40% (p < 0.01) faster for each stage, compared to both SAGE and Irvine one-step standard media. Embryos cultured with SAGE or Irvine media with or without supplementation of CaCl2 or CCC, did not produce the same improvements as observed with ACC. CONCLUSION: In conclusion, the ACC demonstrates a rapid modulation effect for restoring media optimal pH. ACC can inhibit cathepsin B activity during in vitro culture of fibroblast cells. The beneficial impact of ACC on cleavage mouse embryos is likely due to an improved buffering effect causing slower pH media variations, which may enhance quality and implantation potential of embryos following in vitro culture.

How and when to measure pH in IVF culture media: validation of a portable blood gas analyzer in two IVF culture dishes for time lapse and conventional incubators.

PURPOSE: Maintaining a stable pH at optimal level in human embryo culture media is crucial for embryo development but poses a challenge for all IVF laboratories. We validate analytically reliable conditions for pH measurement that are as close as possible to the embryo microenvironment during IVF. METHODS: This was a multicentric study. A Siemens EPOC portable blood gas analyzer was used. The analytical validation was carried out under the culture medium (Global Total HSA®) conditions of use (microdroplets, under oil overlay, in a IVF incubator with (EmbryoScope®) or without a time lapse system (K system G210+®) and using IVF dishes. The validation included repeatability ("within-run" precision), total precision (between-day precision), trueness based on inter-laboratory comparison, inaccuracy based on external quality assessment and comparison to the reference technique. We also assessed the pre-analytical medium incubation time required to obtain a target value. RESULTS: A measurement after an incubation period of 24 to 48 h is more representative of the pH to which the embryo will be exposed throughout the culture. The "within-run" and "between-day" precision show very low coefficients of variation (CV%): 0.17 to 0.22% and 0.13 to 0.34%, respectively, with IVF culture media. Trueness (% bias) range from - 0.07 to - 0.03%. We demonstrate good correlation between EPOC and reference pH electrode with an overestimation of 0.03 pH units of EPOC. CONCLUSION: Our method demonstrates good analytical performance for IVF laboratories wishing to implement a robust quality assurance system to monitor pH in embryo culture media. Compliance with stringent pre-analytical and analytical conditions is essential.

Zinc oxide nanoparticles functionalized with curcumin supplementation during in vitro embryo culture impaired in a concentration-dependent-manner blastocyst production in cattle.

This work investigated the effect of zinc oxide nanoparticles functionalized with curcumin (ZnO(np) + CUR) supplementation during the in vitro embryo culture (IVC) on the bovine in vitro embryo production, and the cellular antioxidant response. The cumulus-oocyte complexes (COCs) were matured, fertilized and then the presumptive zygotes were cultured in the medium in the absence (0 µM-control) or presence of different concentrations of ZnO(np) + CUR (3, 6 or 12 µM). After IVC, the embryos were destined either to assay intracellular ROS levels and mitochondrial membrane potential. The results demonstrated that only the addition of 12 µM ZnO(np) + CUR during IVC decreased intracellular ROS production and the rate of blastocyst production when compared to the control (p < .05). In conclusion, ZnO(np) + CUR addition during the IVC impaired in concentration-dependent-manner bovine in vitro embryo production.

Humidified atmosphere in a time-lapse embryo culture system does not improve ongoing pregnancy rate: a retrospective propensity score model study derived from 496 first ICSI cycles.

PURPOSE: To investigate whether high relative humidity conditions (HC), when using a time-lapse system (TLS) with sequential culture media, are beneficial to embryo culture, improving ongoing pregnancy rates. METHODS: We included patients undergoing their first ICSI cycle treatment from April 2021 to May 2022. Patients assigned to dry conditions (DC) or HC were 278 and 218, respectively. We used a GERI TLS, three chambers configured in humidity conditions and three in dry conditions. The effect of HC on ongoing pregnancy rate was assessed by the propensity matched sample, to reduce potential differences between women undergoing either HC or DC and reduce biased estimation of treatment effect. RESULT: After adjusting for several confounding variables and applying the propensity score (PS), no significant differences were observed in the rates of normal (2PN) and abnormal (1PN and 3PN) fertilization, blastulation, top-quality blastocysts, frozen blastocysts, ongoing pregnancies, and miscarriages. The 2-cell (t2) and 4-cell (t4) stages and cell divisions between such stages occurred earlier and were more synchronous in the in DC. CONCLUSION: These results suggest that HC conditions do not improve the rate of ongoing pregnancy and several embryological outcomes, under the conditions used in this study based on a time-lapse system and sequential culture with day 3 medium change-over.

Derivation of Bovine Primed Embryonic Stem Cells from Somatic Cell Nuclear Transfer Embryos.

Derivation of bovine embryonic stem cells from somatic cell nuclear transfer embryos enables the derivation of genetically matched pluripotent stem cell lines to valuable and well-characterized animals. In this chapter, we describe a step-by-step procedure for deriving bovine embryonic stem cells from whole blastocysts produced by somatic cell nuclear transfer. This simple method requires minimal manipulation of blastocyst-stage embryos, relies on commercially available reagents, supports trypsin passaging, and allows the generation of stable primed pluripotent stem cell lines in 3-4 weeks.