Embryo Microinjection for Transgenesis in Drosophila.

Transgenesis in Drosophila is an essential approach to studying gene function at the organism level. Embryo microinjection is a crucial step for the construction of transgenic flies. Microinjection requires some types of equipment, including a microinjector, a micromanipulator, an inverted microscope, and a stereo microscope. Plasmids isolated with a plasmid miniprep kit are qualified for microinjection. Embryos at the pre-blastoderm or syncytial blastoderm stage, where nuclei share a common cytoplasm, are subjected to microinjection. A cell strainer eases the process of dechorionating embryos. The optimal time for dechorionation and desiccation of embryos needs to be determined experimentally. To increase the efficiency of embryo microinjection, needles prepared by a puller need to be beveled by a needle grinder. In the process of grinding needles, we utilize a foot air pump with a pressure gauge to avoid the capillary effect of the needle tip. We routinely inject 120-140 embryos for each plasmid and obtain at least one transgenic line for around 85% of plasmids. This article takes the phiC31 integrase-mediated transgenesis in Drosophila as an example and presents a detailed protocol for embryo microinjection for transgenesis in Drosophila.

NeuroPorator: An open-source, current-limited electroporator for safe in utero gene transfer.

BACKGROUND: Electroporation is an effective technique for genetic manipulation of cells, both in vitro and in vivo. In utero electroporation (IUE) is a special case, which represents a fine application of this technique to genetically modify specific tissues of embryos during prenatal development. Commercially available electroporators are expensive and not fully customizable. We have designed and produced an inexpensive, open-design, and customizable electroporator optimized for safe IUE. We introduce NeuroPorator. METHOD: We used off-the-shelf electrical parts, a single-board microcontroller, and a cheap data logger to build an open-design electroporator. We included a safety circuit to limit the applied electrical current to protect the embryos. We added full documentation, design files, and assembly instructions. RESULT: NeuroPorator output is on par with commercially available devices. Furthermore, the adjustable current limiter protects both the embryos and the uterus from overcurrent damage. A built-in data acquisition module provides real-time visualization and recordings of the actual voltage/current pulses applied to each embryo. Function of NeuroPorator has been demonstrated by inducing focal cortical dysplasia in mice. SIGNIFICANCE AND CONCLUSION: The simple and fully open design enables quick and cheap construction of the device and facilitates further customization. The features of NeuroPorator can accelerate the IUE technique implementation in any laboratory and speed up its learning curve.

M-TUBE enables large-volume bacterial gene delivery using a high-throughput microfluidic electroporation platform.

Conventional cuvette-based and microfluidics-based electroporation approaches for bacterial gene delivery have distinct advantages, but they are typically limited to relatively small sample volumes, reducing their utility for applications requiring high throughput such as the generation of mutant libraries. Here, we present a scalable, large-scale bacterial gene delivery approach enabled by a disposable, user-friendly microfluidic electroporation device requiring minimal device fabrication and straightforward operation. We demonstrate that the proposed device can outperform conventional cuvettes in a range of situations, including across Escherichia coli strains with a range of electroporation efficiencies, and we use its large-volume bacterial electroporation capability to generate a library of transposon mutants in the anaerobic gut commensal Bifidobacterium longum.

Revisiting the role of pulsed electric fields in overcoming the barriers to in vivo gene electrotransfer.

Gene therapies are revolutionizing medicine by providing a way to cure hitherto incurable diseases. The scientific and technological advances have enabled the first gene therapies to become clinically approved. In addition, with the ongoing COVID-19 pandemic, we are witnessing record speeds in the development and distribution of gene-based vaccines. For gene therapy to take effect, the therapeutic nucleic acids (RNA or DNA) need to overcome several barriers before they can execute their function of producing a protein or silencing a defective or overexpressing gene. This includes the barriers of the interstitium, the cell membrane, the cytoplasmic barriers and (in case of DNA) the nuclear envelope. Gene electrotransfer (GET), i.e., transfection by means of pulsed electric fields, is a non-viral technique that can overcome these barriers in a safe and effective manner. GET has reached the clinical stage of investigations where it is currently being evaluated for its therapeutic benefits across a wide variety of indications. In this review, we formalize our current understanding of GET from a biophysical perspective and critically discuss the mechanisms by which electric field can aid in overcoming the barriers. We also identify the gaps in knowledge that are hindering optimization of GET in vivo.

Protocol for assessment of the efficiency of CRISPR/Cas RNP delivery to different types of target cells.

BACKGROUND: Delivery of CRISPR/Cas RNPs to target cells still remains the biggest bottleneck to genome editing. Many efforts are made to develop efficient CRISPR/Cas RNP delivery methods that will not affect viability of target cell dramatically. Popular current methods and protocols of CRISPR/Cas RNP delivery include lipofection and electroporation, transduction by osmocytosis and reversible permeabilization and erythrocyte-based methods. METHODS: In this study we will assess the efficiency and optimize current CRISPR/Cas RNP delivery protocols to target cells. We will conduct our work using molecular cloning, protein expression and purification, cell culture, flow cytometry (immunocytochemistry) and cellular imaging techniques. DISCUSSION: This will be the first extensive comparative study of popular current methods and protocols of CRISPR/Cas RNP delivery to human cell lines and primary cells. All protocols will be optimized and characterized using the following criteria i) protein delivery and genome editing efficacy; ii) viability of target cells after delivery (post-transduction recovery); iii) scalability of delivery process; iv) cost-effectiveness of the delivery process and v) intellectual property rights. Some methods will be considered 'research-use only', others will be recommended for scaling and application in the development of cell-based therapies.

Monopolar gene electrotransfer enhances plasmid DNA delivery to skin.

A novel monopolar electroporation system and methodologies were developed for in vivo electroporation intended for potential clinical applications such as gene therapy. We hypothesized that an asymmetric anode/cathode electrode applicator geometry could produce favorable electric fields for electroporation, without the typical drawback associated with traditional needle and parallel plate geometries. Three monopolar electrode applicator prototypes were built and tested for gene delivery of reporter genes to the skin in a guinea pig model. Gene expression was evaluated in terms of kinetics over time and expression distribution within the treatment site. Different pulsing parameters, including pulse amplitude, pulse duration, and pulse number were evaluated. Monopolar gene electrotransfer significantly enhanced gene expression compared to controls over the course of 21 days. Gene expression distribution was observed throughout the full thickness of the epidermis, as well as notable expression in the deeper layers of the skin, including the dermis, and the underlying striated muscle without any damage at the treatment site, which is a substantial improvement over previously reported expression confined to the epidermis only. Expression distribution observed is consistent with the electric field distribution model, indicating that our novel electrode geometry results in targeted electroporation and gene transfer. This is important, as it may facilitate translation of many electroporation-based clinical therapies including gene therapies, IRE, and ECT.

Title: Gene transfer by pyro-drive jet injector is a novel therapeutic approach for muscle diseases.

The angiogenic gene therapy is an attractive approach for the treatment of ischemic muscle diseases, including peripheral arterial disease and ischemic heart diseases. Although a variety of gene transfer methods have been developed, the efficiency of gene transfer is still limited. We have been developing the needleless high-energy bioinjector device, Pyro-drive Jet Injector (PJI), based on pyrotechnics using a combination of ignition powder and gunpowder, however, the utility of PJI in gene transfer into muscle tissues remains unclear. pcDNA3.1 plasmid containing Flag was injected to the thigh muscles of C57BL/6J mice using PJI or needle, as a control. Histological analysis demonstrated that the protein expression of Flag was observed in a wider range in PJI group than in needle group. To assess the validity of PJI for gene therapy, pcDNA3.1-human fibroblast growth factor 2 (FGF2), which has angiogenic activity and tissue protective properties, was injected into the ischemic thigh muscles with PJI or needle. ELISA assay revealed that the protein expression of FGF2 was increased in the thigh muscle tissues by PJI-mediated gene delivery. Significantly, histological analyses revealed that muscle fiber cross-sectional area and the number of endothelial marker CD31 (+) cells was increased in ischemic hind-limb tissues of the PJI-FGF2 group but not in those of needle-FGF2 group. To expand the applicability of the PJI-mediated gene transfer, pcDNA3.1-venus plasmid was injected into murine hearts with PJI or needle. PJI method was successful in gene transfer into murine hearts, especially into cardiomyocytes, with high efficiency when compared to needle method. Collectively, the non-needle, non-liposomal and non-viral gene transfer by PJI could be a novel therapeutic approach for muscle diseases.

Ultrasonic actuation of a fine-needle improves biopsy yield.

Despite the ubiquitous use over the past 150 years, the functions of the current medical needle are facilitated only by mechanical shear and cutting by the needle tip, i.e. the lancet. In this study, we demonstrate how nonlinear ultrasonics (NLU) extends the functionality of the medical needle far beyond its present capability. The NLU actions were found to be localized to the proximity of the needle tip, the SonoLancet, but the effects extend to several millimeters from the physical needle boundary. The observed nonlinear phenomena, transient cavitation, fluid streams, translation of micro- and nanoparticles and atomization, were quantitatively characterized. In the fine-needle biopsy application, the SonoLancet contributed to obtaining tissue cores with an increase in tissue yield by 3-6× in different tissue types compared to conventional needle biopsy technique using the same 21G needle. In conclusion, the SonoLancet could be of interest to several other medical applications, including drug or gene delivery, cell modulation, and minimally invasive surgical procedures.

Recent Advances in Microfluidics for the Preparation of Drug and Gene Delivery Systems.

Drug delivery systems (DDSs) have great potential for improving the treatment of several diseases, especially microbial infections and cancers. However, the formulation procedures of DDSs remain challenging, especially at the nanoscale. Reducing batch-to-batch variation and enhancing production rate are some of the essential requirements for accelerating the translation of DDSs from a small scale to an industrial level. Microfluidic technologies have emerged as an alternative to the conventional bench methods to address these issues. By providing precise control over the fluid flows and rapid mixing, microfluidic systems can be used to fabricate and engineer different types of DDSs with specific properties for efficient delivery of a wide range of drugs and genetic materials. This review discusses the principles of controlled rapid mixing that have been employed in different microfluidic strategies for producing DDSs. Moreover, the impact of the microfluidic device design and parameters on the type and properties of DDS formulations was assessed, and recent applications in drug and gene delivery were also considered.

Acoustofluidic sonoporation for gene delivery to human hematopoietic stem and progenitor cells.

Advances in gene editing are leading to new medical interventions where patients' own cells are used for stem cell therapies and immunotherapies. One of the key limitations to translating these treatments to the clinic is the need for scalable technologies for engineering cells efficiently and safely. Toward this goal, microfluidic strategies to induce membrane pores and permeability have emerged as promising techniques to deliver biomolecular cargo into cells. As these technologies continue to mature, there is a need to achieve efficient, safe, nontoxic, fast, and economical processing of clinically relevant cell types. We demonstrate an acoustofluidic sonoporation method to deliver plasmids to immortalized and primary human cell types, based on pore formation and permeabilization of cell membranes with acoustic waves. This acoustofluidic-mediated approach achieves fast and efficient intracellular delivery of an enhanced green fluorescent protein-expressing plasmid to cells at a scalable throughput of 200,000 cells/min in a single channel. Analyses of intracellular delivery and nuclear membrane rupture revealed mechanisms underlying acoustofluidic delivery and successful gene expression. Our studies show that acoustofluidic technologies are promising platforms for gene delivery and a useful tool for investigating membrane repair.

Targeted delivery of engineered auditory sensing protein for ultrasound neuromodulation in the brain.

Sonogenetics is a promising approach for in vivo neuromodulation using ultrasound (US) to non-invasively stimulate cells in deep tissue. However, sonogenetics requires accurate transduction of US-responsive proteins into target cells. Here, we introduce a non-invasive and non-viral approach for intracerebral gene delivery. This approach utilizes temporary ultrasonic disruption of the blood-brain barrier (BBB) to transfect neurons at specific sites in the brain via DNA that encodes engineered US-responsive protein (murine Prestin (N7T, N308S))-loaded microbubbles (pPrestin-MBs). Prestin is a transmembrane protein that exists in the mammalian auditory system and functions as an electromechanical transducer. We further improved the US sensitivity of Prestin by introducing specific amino acid substitutions that frequently occur in sonar species into the mouse Prestin protein. We demonstrated this concept in mice using US with pPrestin-MBs to non-invasively modify and activate neurons within the brain for spatiotemporal neuromodulation. Method: MBs composed of cationic phospholipid and C3F8 loaded with mouse Prestin plasmid (pPrestin) via electrostatic interactions. The mean concentration and size of the pPrestin-MBs were (16.0 ± 0.2) × 109 MBs/mL and 1.1 ± 0.2 µm, respectively. SH-SY5Y neuron-like cells and C57BL mice were used in this study. We evaluated the gene transfection efficiency and BBB-opening region resulting from pPrestin-MBs with 1-MHz US (pressure = 0.1-0.5 MPa, cycle = 50-10000, pulse repetition frequency (PRF): 0.5-5 Hz, sonication time = 60 s) using green fluorescence protein (Venus) and Evans blue staining. Results: The maximum pPrestin expression with the highest cell viability occurred at a pressure of 0.5 MPa, cycle number of 5000, and PRF of 1 Hz. The cellular transfection rate with pPrestin-MBs and US was 20.2 ± 2.5%, which was 1.5-fold higher than that of commercial transfection agents (LT-1). In vivo data suggested that the most profound expression of pPrestin occurred at 2 days after performing pPrestin-MBs with US (0.5 MPa, 240 s sonication time). In addition, no server erythrocyte extravasations and apoptosis cells were observed at US-sonicated region. We further found that with 0.5-MHz US stimulation, cells with Prestin expression were 6-fold more likely to exhibit c-Fos staining than cells without Prestin expression. Conclusion: Successful activation of Prestin-expressing neurons suggests that this technology provides non-invasive and spatially precise selective modulation of one or multiple specific brain regions.

A New Plant Expression System for Producing Pharmaceutical Proteins.

In the past decade, interest in the production of recombinant pharmaceutical proteins in plants has tremendously progressed because plants do not harbor mammalian viruses, are economically competitive, easily scalable, and capable of carrying out complex post-translational modifications required for recombinant pharmaceutical proteins. Mucuna bracteata is an essential perennial cover crop species widely planted as an underground cover in oil palm and rubber plantations. As a legume, they have high biomass, thrive in its habitat, and can fix nitrogen. Thus, M. bracteata is a cost-efficient crop that shows ideal characteristics as a platform for mass production of recombinant protein. In this study, we established a new platform for the transient production of a recombinant protein in M. bracteata via vacuum-assisted agro-infiltration. Five-week-old M. bracteata plants were vacuum infiltrated with Agrobacterium tumefaciens harboring a plasmid that encodes for an anti-toxoplasma immunoglobulin (IgG) under different parameters, including trifoliate leaf positional effects, days to harvest post-infiltration, and the Agrobacterium strain used. Our results showed that vacuum infiltration of M. bracteata plant with A. tumefaciens strain GV3101 produced the highest concentration of heterologous protein in its bottom trifoliate leaf at 2 days post-infiltration. The purified anti-toxoplasma IgG was then analyzed using Western blot and ELISA. It was demonstrated that, while structural heterogeneity existed in the purified anti-toxoplasma IgG from M. bracteata, its transient expression level was two-fold higher than the model platform, Nicotiana benthamiana. This study has laid the foundation towards establishing M. bracteata as a potential platform for the production of recombinant pharmaceutical protein.

PEGylated gene carriers in serum under shear flow.

The behaviour of drug/gene carriers in the blood stream under shear is still a puzzle. In this work, using the complexes formed by 21 bp DNA and poly(ethylene glycol)-b-poly(l-lysine) (PEG-PLL) of varying PEG lengths, we studied the dynamic behaviour of the complexes in the presence of fetal bovine serum (FBS) and under flow at different shear rates, a condition mimicking the internal physical environment of blood vessels. The PEG5k-PLL/DNA complex possesses a dense DNA/PLL core and a loose PEG5k protecting layer. The PEGylated DNA complexes exhibit multiple responses to external shear in the presence of FBS. The loose PEG5k layer is firstly disturbed at a shear rate below 30 s-1. The exposure of the charged core to the environment results in a secondary aggregation of the complex with FBS. The size of the aggregate is limited to a certain range as the shear rate increases to 50 s-1. The dense DNA/PLL core starts to withstand the shear force as the shear rate reaches 500 s-1. The reorganization of the core to accommodate more serum molecules leads to tertiary aggregation of the complexes. If PEG cannot form a valid layer around the complex, as in PEG2k-PLL/DNA, the complex forms an aggregate even without shear, and the first shear dependent region is missing. If the PEG layer is too stable around the complex, as in PEG10k-PLL/DNA, no tertiary aggregation occurs. The mechanism of shear on the behaviour of delivery particles in serum helps to design gene carriers with high efficacy.

ElectroPen: An ultra-low-cost, electricity-free, portable electroporator.

Electroporation is a basic yet powerful method for delivering small molecules (RNA, DNA, drugs) across cell membranes by application of an electrical field. It is used for many diverse applications, from genetically engineering cells to drug- and DNA-based vaccine delivery. Despite this broad utility, the high cost of electroporators can keep this approach out of reach for many budget-conscious laboratories. To address this need, we develop a simple, inexpensive, and handheld electroporator inspired by and derived from a common household piezoelectric stove lighter. The proposed "ElectroPen" device can cost as little as 23 cents (US dollars) to manufacture, is portable (weighs 13 g and requires no electricity), can be easily fabricated using 3D printing, and delivers repeatable exponentially decaying pulses of about 2,000 V in 5 ms. We provide a proof-of-concept demonstration by genetically transforming plasmids into Escherichia coli cells, showing transformation efficiency comparable to commercial devices, but at a fraction of the cost. We also demonstrate the potential for rapid dissemination of this approach, with multiple research groups across the globe validating the ease of construction and functionality of our device, supporting the potential for democratization of science through frugal tools. Thus, the simplicity, accessibility, and affordability of our device holds potential for making modern synthetic biology accessible in high school, community, and resource-poor laboratories.

pH-responsive polydopamine nanoparticles for photothermally promoted gene delivery.

Recently, stimuli-responsive gene carriers have been widely studied to overcome the extra- and intracellular barriers in cancer treatment. In this study, we modified polydopamine nanoparticles with low-molecular weight polyethylenimine (PEI1.8k) and polyethylene glycol-phenylboronic acid (PEG-PBA) to prepare pH-responsive gene carrier PDANP-PEI-rPEG. PBA and polydopamine could form pH-responsive boronate ester bonds. Non-responsive PDANP-PEI-nPEG and non-PEGylated PDANP-PEI were also studied as control. Both PDANP-PEI-rPEG/DNA and PDANP-PEI-nPEG/DNA complexes remained stable in the pH environment of blood circulation or extracellular delivery (pH 7.4) owing to the PEG modification. And after being internalized into endosomes, the boronate ester bonds could be cleaved. The pH responsive ability of PDANP-PEI-rPEG might facilitate complexes dissociation and gene release inside cells. The transfection level of PDANP-PEI-rPEG/DNA complexes was about 100 times higher than that of PDANP-PEI-nPEG/DNA complexes with the same mass ratios. Moreover, after NIR light irradiation at the power density of 2.6 W/cm2 for 20 min, the good photothermal conversion ability of PDANP resulted in quick endosomal escape. The transfection level of PDANP-PEI-rPEG/DNA complexes doubled, even higher than that of lipofectamine 2000/DNA complexes. This was also confirmed by Bafilomycin A1 inhibition test and CLSM observation. In response to the acidic pH within cancer cells and the NIR light irradiation, the PDANP-PEI-rPEG carrier could overcome multiple obstacles in gene delivery, which was promising for further application in gene therapy.

Modified Frameless Stereotactic System for Intracerebral Delivery of Viral Vector in Young Children.

BACKGROUND: Stereotaxic surgery for viral vector delivery in young children is highly challenging because of their small cranial size, thin and fragile skull, and deformity of the skull or brain after prolonged bed ridden condition. OBJECTIVE: To develop a modified frameless stereotactic system especially suitable for intracerebral delivery of viral vector in young children for accurate localization of intracerebral targets during stereotactic surgery. METHODS: A modified frameless stereotactic system was developed for intracerebral delivery of viral vector in pediatric patients with congenital enzyme deficiency. Localization markers and a stereotactic stabilizer were designed specifically for surgery in pediatric patients, and this equipment is used along with a pre-existing frameless stereotactic and computer-assisted planning and navigation system. RESULTS: We applied this modified frameless stereotactic system to treat 10 children with aromatic L-amino acid decarboxylase deficiency. CONCLUSION: It is potentially suitable for stereotactic functional neurosurgery in pediatric patients as young as 1 yr and 8 mo of age.

Establishment of a Parvovirus B19 NS1-Expressing Recombinant Adenoviral Vector for Killing Megakaryocytic Leukemia Cells.

Adenoviral viral vectors have been widely used for gene-based therapeutics, but commonly used serotype 5 shows poor transduction efficiency into hematopoietic cells. In this study, we aimed to generate a recombinant adenovirus serotype 5 (rAd5) vector that has a high efficiency in gene transfer to megakaryocytic leukemic cells with anticancer potential. We first modified the rAd5 backbone vector with a chimeric fiber gene of Ad5 and Ad11p (rAd5F11p) to increase the gene delivery efficiency. Then, the nonstructural protein NS1 of human parvovirus B19 (B19V), which induces cell cycle arrest at the G2/M phase and apoptosis, was cloned into the adenoviral shuttle vector. As the expression of parvoviral NS1 protein inhibited Ad replication and production, we engineered the cytomegalovirus (CMV) promoter, which governs NS1 expression, with two tetracycline operator elements (TetO2). Transfection of the rAd5F11p proviral vectors in Tet repressor-expressing T-REx-293 cells produced rAd in a large quantity. We further evaluated this chimeric rAd5F11p vector in gene delivery in human leukemic cells, UT7/Epo-S1. Strikingly, the novel rAd5F11p-B19NS1-GFP vector, exhibited a transduction efficiency much higher than the original vector, rAd5-B19NS1-GFP, in UT7/Epo-S1 cells, in particular, when they were transduced at a relatively low multiplicity of infection (100 viral genome copies/cell). After the transduction of rAd5F11p-B19NS1-GFP, over 90% of the UT7/Epo-S1 cells were arrested at the G2/M phase, and approximately 40%-50% of the cells were undergoing apoptosis, suggesting the novel rAd5F11P-B19NS1-GFP vector holds a promise in therapeutic potentials of megakaryocytic leukemia.

A nanogel based oral gene delivery system targeting SUMOylation machinery to combat gut inflammation.

Poor success rates and challenges associated with the current therapeutic strategies of inflammatory bowel disease (IBD) have accelerated the emergence of gene therapy as an alternative treatment option with great promise. However, oral delivery of nucleic acids (NAs) to an inflamed colon is challenged by multiple barriers presented by the gastrointestinal, extracellular and intracellular compartments. Therefore, we screened a series of polyaspartic acid-derived amphiphilic cationic polymers with varied hydrophobicity for their ability to deliver NAs into mammalian cells. Using the most effective TAC6 polymer, we then engineered biocompatible and stable nanogels composed of polyplexes (TAC6, NA) and an anionic polymer, sodium polyaspartate, that were able to deliver the NAs across mammalian cells using caveolae-mediated cellular uptake. We then utilized these nanogels for oral delivery of PIAS1 (protein inhibitor of activated STAT1), a SUMO 3 ligase, encoding plasmid DNA since PIAS1 is a key nodal therapeutic target for IBD due to its ability to control NF-κB-mediated inflammatory signaling. We show that plasmid delivery using TAC6-derived nanogels diminished gut inflammation in a murine colitis model. Therefore, our study presents engineering of orally deliverable nanogels that can target SUMOylation machinery to combat gut inflammation with very high efficacy.

Nonviral ultrasound-mediated gene delivery in small and large animal models.

Ultrasound-mediated gene delivery (sonoporation) is a minimally invasive, nonviral and clinically translatable method of gene therapy. This method offers a favorable safety profile over that of viral vectors and is less invasive as compared with other physical gene delivery approaches (e.g., electroporation). We have previously used sonoporation to overexpress transgenes in different skeletal tissues in order to induce tissue regeneration. Here, we provide a protocol that could easily be adapted to address various other targets of tissue regeneration or additional applications, such as cancer and neurodegenerative diseases. This protocol describes how to prepare, conduct and optimize ultrasound-mediated gene delivery in both a murine and a porcine animal model. The protocol includes the preparation of a microbubble-DNA mix and in vivo sonoporation under ultrasound imaging. Ultrasound-mediated gene delivery can be accomplished within 10 min. After DNA delivery, animals can be followed to monitor gene expression, protein secretion and other transgene-specific outcomes, including tissue regeneration. This procedure can be accomplished by a competent graduate student or technician with prior experience in ultrasound imaging or in performing in vivo procedures.

Microfluidic manufacturing of surface-functionalized graphene oxide nanoflakes for gene delivery.

Graphene oxide (GO) is a single-atomic-layered material made of a sheet of oxidized carbon atoms arranged in a honeycomb structure. Thanks to the notable physical and chemical properties of GO, GO-based nanomaterials have applications in many fields of research, including gene delivery. It has been reported that pristine GO can absorb single-stranded DNA and RNA through π-π stacking, which cannot be used as a gene carrier because it is hard to load double-stranded DNA (dsDNA). To tackle this issue, this work was aimed at developing a hybrid nanoparticle (NP) system made of GO coated with cationic lipids (hereafter referred to as GOCL) with suitable physical-chemical properties for gene delivery applications. To this end, nanosized GO flakes (nGO) were coated with the cationic lipid 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP) by microfluidic mixing. Comprehensive characterization of GOCL NPs was performed by a combination of dynamic light scattering (DLS), micro-electrophoresis and atom force microscopy (AFM). Our results show that GOCL NPs exhibit adequate size (<150 nm) and surface charge (ξ = +15 mV) for gene delivery purposes. Complexes made of GOCL NPs and plasmid DNA (pDNA) were used to transfect human cervical cancer cells (HeLa) and human embryonic kidney (HEK-293) cells. Pristine nGO and DOTAP cationic liposomes were used as a reference. GOCL NPs exhibited a similar TE but a much higher cell viability compared with DOTAP cationic liposomes. Confocal fluorescence microscopy provided a reasonable explanation for the superior performance of GOCL/DNA complexes showing that they are much more numerous, regular in size and homogeneously distributed than DOTAP/DNA complexes, thus splitting their gene payload over the entire cell population. Because of the imperative demand for efficient and safe nanocarriers, this study will contribute to the development of novel surface-functionalized GO-based hybrid gene vectors.