Analyzing the Impact of Protein Overexpression on Ca2+ Dynamics and Development in Tobacco Pollen Tubes.

Overexpression of RFP-tagged proteins in growing tobacco pollen tubes together with the genetically encoded Ca2+ sensor YC3.6 allows to analyze localization and dynamics of the protein of interest, as well as the impact of its overexpression on Ca2+ dynamics and pollen tube growth. Here, we describe a step-by-step instruction for transient transformation of N. tabacum pollen and subsequent in vitro germination and Ca2+ imaging.

Comparing the performance of mScarlet-I, mRuby3, and mCherry as FRET acceptors for mNeonGreen.

Förster Resonance Energy Transfer (FRET) has become an immensely powerful tool to profile intra- and inter-molecular interactions. Through fusion of genetically encoded fluorescent proteins (FPs) researchers have been able to detect protein oligomerization, receptor activation, and protein translocation among other biophysical phenomena. Recently, two bright monomeric red fluorescent proteins, mRuby3 and mScarlet-I, have been developed. These proteins offer much improved physical properties compared to previous generations of monomeric red FPs that should help facilitate more general adoption of Green/Red FRET. Here we assess the ability of these two proteins, along with mCherry, to act as a FRET acceptor for the bright, monomeric, green-yellow FP mNeonGreen using intensiometric FRET and 2-photon Fluorescent Lifetime Imaging Microscopy (FLIM) FRET techniques. We first determined that mNeonGreen was a stable donor for 2-photon FLIM experiments under a variety of imaging conditions. We then tested the red FP's ability to act as FRET acceptors using mNeonGreen-Red FP tandem construct. With these constructs we found that mScarlet-I and mCherry are able to efficiently FRET with mNeonGreen in spectroscopic and FLIM FRET. In contrast, mNeonGreen and mRuby3 FRET with a much lower efficiency than predicted in these same assays. We explore possible explanations for this poor performance and determine mRuby3's protein maturation properties are a major contributor. Overall, we find that mNeonGreen is an excellent FRET donor, and both mCherry and mScarlet-I, but not mRuby3, act as practical FRET acceptors, with the brighter mScarlet-I out performing mCherry in intensiometric studies, but mCherry out performing mScarlet-I in instances where consistent efficiency in a population is critical.

Carbon Dots-Modified Nanoporous Membrane and Fe3O4@Au Magnet Nanocomposites-Based FRET Assay for Ultrasensitive Histamine Detection.

Histamine can be formed by enzymatic decarbonylation of histidine, which is an important indicator of seafood quality. A rapid and sensitive assay method is necessary for histamine monitoring. A fluorescence resonance energy transfer (FRET) assay system based on a carbon dot (CD)-modified nanoporous alumina membrane and Fe3O4@Au magnet nanocomposites has been developed for histamine detection in mackerel fish. CDs immobilized on nanoporous alumina membranes were used as donors, which provided a fluorescence sensing substrate for histamine detection. Fe3O4@Au magnet nanocomposites can not only act as acceptors, but also concentrate histamine from fish samples to increase detection sensitivity. Histamine was detected by the fluorescence signal changes of CDs capturing histamine by an immune reaction. The fluorescence signals of CDs were quenched by Fe3O4@Au magnet nanocomposites via the FRET mechanism. With an increase of histamine, the fluorescence intensity decreased. By recording fluorescence spectra and calculating intensity change, histamine concentration can be determined with a limit of detection (LOD) of 70 pM. This assay system can be successfully applied for histamine determination in mackerel fish to monitor the fish spoilage process in different storage conditions. It shows the potential applications of CDs-modified nanoporous alumina membranes and Fe3O4@Au magnet nanocomposites-based biosensors in the food safety area.

Precision and accuracy in smFRET based structural studies-A benchmark study of the Fast-Nano-Positioning System.

Modern hybrid structural analysis methods have opened new possibilities to analyze and resolve flexible protein complexes where conventional crystallographic methods have reached their limits. Here, the Fast-Nano-Positioning System (Fast-NPS), a Bayesian parameter estimation-based analysis method and software, is an interesting method since it allows for the localization of unknown fluorescent dye molecules attached to macromolecular complexes based on single-molecule Förster resonance energy transfer (smFRET) measurements. However, the precision, accuracy, and reliability of structural models derived from results based on such complex calculation schemes are oftentimes difficult to evaluate. Therefore, we present two proof-of-principle benchmark studies where we use smFRET data to localize supposedly unknown positions on a DNA as well as on a protein-nucleic acid complex. Since we use complexes where structural information is available, we can compare Fast-NPS localization to the existing structural data. In particular, we compare different dye models and discuss how both accuracy and precision can be optimized.

Development and Validation of a Universal High-Throughput UDP-Glycosyltransferase Assay with a Time-Resolved FRET Signal.

Glycosyltransferase enzymes play diverse metabolic and regulatory roles by catalyzing the transfer of sugar molecules to protein, lipid, and carbohydrate acceptors, and they are increasingly of interest as therapeutic targets in a number of diseases, including metabolic disorders, cancer, and infectious diseases. The glycosyltransferases are a challenging target class from an assay development perspective because of the diversity of both donor and acceptor substrates and the lack of suitable glycan detection methods. However, many glycosyltransferases use uridine 5'-diphosphate (UDP) sugars as donor substrates, and detection of the free UDP reaction product provides a generic approach for measuring the activity of those enzymes. To exploit this approach for a broadly applicable high-throughput screening (HTS) assay for discovery of glycosyltransferase inhibitors, we developed a Transcreener(®) assay for immunodetection of UDP with a time-resolved Förster resonance energy transfer (TR-FRET) signal. We optimized the assay for detection of glycosyltransferase activity with nucleotide diphosphate (NDP) sugars at concentrations from 10 µM to 1 mM, achieving Z' values of 0.6 or higher. The assay was validated by orthogonal pooled screening with 8,000 compounds using polypeptide N-acetylgalactosaminyltransferase T3 as the target, and the hits were confirmed using an orthogonal readout. The reagents and signal were both stable for more than 8 h at room temperature, insuring robust performance in automated HTS environments. The TR-FRET-based UDP detection assay provides a broadly applicable approach for screening glycosyltransferases that use a UDP-sugar donor.

Improvement of the Mutation-Discrimination Threshold for Rare Point Mutations by a Separation-Free Ligase Detection Reaction Assay Based on Fluorescence Resonance Energy Transfer.

We previously developed a separation-free ligase detection reaction assay based on fluorescence resonance energy transfer from a donor quantum dot to an acceptor fluorescent dye. This assay could successfully detect one cancer mutation among 10 wild-type templates. In the current study, the mutation-discrimination threshold was improved by one order of magnitude by replacing the original acceptor dye (Alexa Fluor 647) with another fluorescent dye (Cyanine 5) that was spectrally similar but more fluorescent.

Lateral diffusion contributes to FRET from lanthanide-tagged membrane proteins.

Diffusion can enhance Förster resonance energy transfer (FRET) when donors or acceptors diffuse distances that are similar to the distances separating them during the donor's excited state lifetime. Lanthanide donors remain in the excited state for milliseconds, which makes them useful for time-resolved FRET applications but also allows time for diffusion to enhance energy transfer. Here we show that diffusion dramatically enhances FRET between membrane proteins labeled with lanthanide donors. This phenomenon complicates interpretation of experiments that use long-lived donors to infer association or proximity of mobile membrane proteins, but also offers a method of monitoring diffusion in membrane domains in real time in living cells.

The use of FLIM-FRET for the detection of mitochondria-associated protein interactions.

Fluorescence lifetime imaging microscopy-Förster resonant energy transfer (FLIM-FRET) is a high-resolution technique for the detection of protein interactions in live cells. As the cost of this technology becomes more competitive and methods are devised to extract more information from the FLIM images, this technique will be increasingly useful for studying protein interactions in live cells. Here we demonstrate the use of the ISS-Alba FLIM/FCS confocal microscope, which was custom-built for supervised automation of FLIM data acquisition. We provide a detailed protocol for collecting and analyzing good FLIM-FRET data. As an example, we use FLIM-FRET to detect the interaction between BclXL and Bad at the mitochondrial outer membrane in live MCF7 breast cancer cells.

Quantitative FRET measurement using emission-spectral unmixing with independent excitation crosstalk correction.

Quantification of fluorescence resonance energy transfer (FRET) needs at least two external samples, an acceptor-only reference and a linked FRET reference, to calibrate fluorescence signal. Furthermore, all measurements for references and FRET samples must be performed under the same instrumental conditions. Based on a novel notion to predetermine the molar extinction coefficient ratio (RC ) of acceptor-to-donor for the correction of acceptor excitation crosstalk, we present here a robust and independent emission-spectral unmixing FRET methodology, Iem-spFRET, which can simultaneously measure the E and RC of FRET sample without any external references, such that Iem-spFRET circumvents the rigorous restriction of keeping the same imaging conditions for all FRET experiments and thus can be used for the direct measurement of FRET sample. We validate Iem-spFRET by measuring the absolute E and RC values of standard constructs with different acceptor-to-donor stoichiometry expressed in living cells. Our results demonstrate that Iem-spFRET is a simple and powerful tool for real-time monitoring the dynamic intermolecular interaction within single living cells.

Assessing HTS performance using BioAssay Ontology: screening and analysis of a bacterial phospho-N-acetylmuramoyl-pentapeptide translocase campaign.

With the public availability of biochemical assays and screening data constantly increasing, new applications for data mining and method analysis are evolving in parallel. One example is BioAssay Ontology (BAO) for systematic classification of assays based on screening setup and metadata annotations. In this article we report a high-throughput screening (HTS) against phospho-N-acetylmuramoyl-pentapeptide translocase (MraY), an attractive antibacterial drug target involved in peptidoglycan synthesis. The screen resulted in novel chemistry identification using a fluorescence resonance energy transfer assay. To address a subset of the false positive hits, a frequent hitter analysis was performed using an approach in which MraY hits were compared with hits from similar assays, previously used for HTS. The MraY assay was annotated according to BAO and three internal reference assays, using a similar assay design and detection technology, were identified. Analyzing the assays retrospectively, it was clear that both MraY and the three reference assays all showed a high false positive rate in the primary HTS assays. In the case of MraY, false positives were efficiently identified by applying a method to correct for compound interference at the hit-confirmation stage. Frequent hitter analysis based on the three reference assays with similar assay method identified additional false actives in the primary MraY assay as frequent hitters. This article demonstrates how assays annotated using BAO terms can be used to identify closely related reference assays, and that analysis based on these assays clearly can provide useful data to influence assay design, technology, and screening strategy.

Biosensor architectures for high-fidelity reporting of cellular signaling.

Understanding mechanisms of information processing in cellular signaling networks requires quantitative measurements of protein activities in living cells. Biosensors are molecular probes that have been developed to directly track the activity of specific signaling proteins and their use is revolutionizing our understanding of signal transduction. The use of biosensors relies on the assumption that their activity is linearly proportional to the activity of the signaling protein they have been engineered to track. We use mechanistic mathematical models of common biosensor architectures (single-chain FRET-based biosensors), which include both intramolecular and intermolecular reactions, to study the validity of the linearity assumption. As a result of the classic mechanism of zero-order ultrasensitivity, we find that biosensor activity can be highly nonlinear so that small changes in signaling protein activity can give rise to large changes in biosensor activity and vice versa. This nonlinearity is abolished in architectures that favor the formation of biosensor oligomers, but oligomeric biosensors produce complicated FRET states. Based on this finding, we show that high-fidelity reporting is possible when a single-chain intermolecular biosensor is used that cannot undergo intramolecular reactions and is restricted to forming dimers. We provide phase diagrams that compare various trade-offs, including observer effects, which further highlight the utility of biosensor architectures that favor intermolecular over intramolecular binding. We discuss challenges in calibrating and constructing biosensors and highlight the utility of mathematical models in designing novel probes for cellular signaling.

FIBS-enabled noninvasive metabolic profiling.

In the era of computational biology, new high throughput experimental systems are necessary in order to populate and refine models so that they can be validated for predictive purposes. Ideally such systems would be low volume, which precludes sampling and destructive analyses when time course data are to be obtained. What is needed is an in situ monitoring tool which can report the necessary information in real-time and noninvasively. An interesting option is the use of fluorescent, protein-based in vivo biological sensors as reporters of intracellular concentrations. One particular class of in vivo biosensors that has found applications in metabolite quantification is based on Förster Resonance Energy Transfer (FRET) between two fluorescent proteins connected by a ligand binding domain. FRET integrated biological sensors (FIBS) are constitutively produced within the cell line, they have fast response times and their spectral characteristics change based on the concentration of metabolite within the cell. In this paper, the method for constructing Chinese hamster ovary (CHO) cell lines that constitutively express a FIBS for glucose and glutamine and calibrating the FIBS in vivo in batch cell culture in order to enable future quantification of intracellular metabolite concentration is described. Data from fed-batch CHO cell cultures demonstrates that the FIBS was able in each case to detect the resulting change in the intracellular concentration. Using the fluorescent signal from the FIBS and the previously constructed calibration curve, the intracellular concentration was accurately determined as confirmed by an independent enzymatic assay.

Measuring protein interactions using Förster resonance energy transfer and fluorescence lifetime imaging microscopy.

The method of fluorescence lifetime imaging microscopy (FLIM) is a quantitative approach that can be used to detect Förster resonance energy transfer (FRET). The use of FLIM to measure the FRET that results from the interactions between proteins labeled with fluorescent proteins (FPs) inside living cells provides a non-invasive method for mapping interactomes. Here, the use of the phasor plot method to analyze frequency domain (FD) FLIM measurements is described, and measurements obtained from cells producing the 'FRET standard' fusion proteins are used to validate the FLIM system for FRET measurements. The FLIM FRET approach is then used to measure both homologous and heterologous protein-protein interactions (PPI) involving the CCAAT/enhancer-binding protein alpha (C/EBPα). C/EBPα is a transcription factor that controls cell differentiation, and localizes to heterochromatin where it interacts with the heterochromatin protein 1 alpha (HP1α). The FLIM-FRET method is used to quantify the homologous interactions between the FP-labeled basic leucine zipper (BZip) domain of C/EBPα. Then the heterologous interactions between the C/EBPa BZip domain and HP1a are quantified using the FRET-FLIM method. The results demonstrate that the basic region and leucine zipper (BZip) domain of C/EBPα is sufficient for the interaction with HP1α in regions of heterochromatin.

Imaging and identifying impurities in single-molecule FRET studies.

Single-molecule (sm) Förster (fluorescence) resonance energy transfer (FRET) is a spectroscopic technique in which the efficiency of energy transfer from donor to acceptor molecules is used to determine distances between molecules in the 30-80 Å range. Structural changes in biological molecules or relative motion between two interacting molecules can be detected by a change in FRET. To study the conformational changes of individual molecules over extended time periods, the molecules must be immobilized on a coated surface that allows highly specific tethering of DNA, RNA, or protein. Nevertheless, there are always some fluorescent impurities on the surface and, without experience in sm imaging, it is often difficult to distinguish molecules of interest from impurities. This protocol describes the use of an imaging buffer that enhances the photostability of cyanine dyes used for smFRET, with emphasis on distinguishing molecules of interest from impurities.

Self-calibrating viscosity probes: design and subcellular localization.

We describe the design, synthesis and fluorescence profiles of new self-calibrating viscosity dyes in which a coumarin (reference fluorophore) has been covalently linked with a molecular rotor (viscosity sensor). Characterization of their fluorescence properties was made with separate excitation of the units and through resonance energy transfer from the reference to the sensor dye. We have modified the linker and the substitution of the rotor in order to change the hydrophilicity of these probes thereby altering their subcellular localization. For instance, hydrophilic dye 12 shows a homogeneous distribution inside the cell and represents a suitable probe for viscosity measurements in the cytoplasm.

A gold nanoparticles-modified aptamer beacon for urinary adenosine detection based on structure-switching/fluorescence-"turning on" mechanism.

A novel small molecule probe, aptamer beacon (AB), was introduced for adenosine (Ade) recognition and quantitative analysis. The Ade aptamer was engineered into an aptamer beacon by adding a gold nanoparticle-modified nucleotide sequence which is complementary to aptamer sequence (FDNA) at the 3'-end of FDNA. The fluorescence signal "turning on" was observed when AB was bound to Ade, which is attributed to a significant conformational change in AB from a FDNA/QDNA duplex to a FDNA-Ade complex. The Ade measurement was carried out in 20 mmol L(-1) Tris-HCl buffer solution of pH 7.4, ΔF signal linearly correlated with the concentration of Ade over the range of 2.0×10(-8) to 1.8×10(-6) mol L(-1). The limit of detection (LOD) for Ade is 6.0×10(-9) mol L(-1) with relative standard deviations (R.S.D) of 3.64-5.36%, and the recoveries were 98.6%, 100%, 102% (n=6), respectively. The present method has been successfully applied to determine Ade in human urine samples, and the obtained results were in good agreement with those obtained by the HPLC method. Our investigation shows that the unique properties of the AB could provide a promising potential for small molecules detection, and be benefit to extend the application of aptamer beacon technique.

A homogeneous fluorescent sensor for human serum albumin.

Human serum albumin is the most abundant protein in the body and is an important biomarker used for disease-related diagnosis. Although the traditional enzyme-linked immunosorbent assay (ELISA) approach can precisely measure the concentration of human serum albumin, the multi-step procedure and time-consuming preparations of ELISA limit its diagnostic applications, preventing accurate point-of-care testing, for example. Herein, we report the recent development of an antibody-based albumin sensor that allows for a homogeneous measurement of albumin concentrations in saliva, urine and serum, in which this type of sensor is validated for the first time. The assay only requires simple mixing, and relies on time-resolved (TR) fluorescence resonance energy transfer (FRET) to produce robust, sensitive signals. The whole process, from sample preparation to final read-out, is expected to take less than 1h and requires only a standard plate-reader, thus making the sensor a convenient and cost-effective tool for albumin analysis.

FRET microscopy in 2010: the legacy of Theodor Förster on the 100th anniversary of his birth.

Theodor Förster would have been 100 years old this year, and he would have been astounded to see the impact of his scientific achievement, which is still evolving. Combining his quantitative approach of (Förster) resonance energy transfer (FRET) with state-of-the-art digital imaging techniques allows scientists to breach the resolution limits of light (ca. 200 nm) in light microscopy. The ability to deduce molecular or particle distances within a range of 1-10 nm in real time and to prove or disprove interactions between two or more components is of vital interest to researchers in many branches of science. While Förster's groundbreaking theory was published in the 1940s, the availability of suitable fluorophores, instruments, and analytical tools spawned numerous experiments in the last 20 years, as demonstrated by the exponential increase in publications. These cover basic investigation of cellular processes and the ability to investigate them when they go awry in pathological states, the dynamics involved in genetics, and following events in environmental sciences and methods in drug screening. This review covers the essentials of Theodor Förster's theory, describes the elements for successful implementation of FRET microscopy, the challenges and how to overcome them, and a leading-edge example of how Förster's scientific impact is still evolving in many directions. While this review cannot possibly do justice to the burgeoning field of FRET microscopy, a few interesting applications such as threecolor FRET, which greatly expands the opportunities for investigating interactions of cellular components compared with the traditional two-color method, are described, and an extensive list of references is provided for the interested reader to access.