Development and validation of method for the simultaneous determination of sulfamethazine, trimethoprim and doxycycline in veterinary formulation using high performance liquid chromatography.

Sulfamethazine (SMZ), trimethoprim (TMP) and doxycycline (DOXY) are drugs of choice used in the treatment of intestinal and respiratory infections that affect poultry and swine. The aim of this study was develop and validate a simple, sensitive and fast method for the simultaneous determination of SMZ, TMP and DOXY in veterinary formulations by high-performance liquid chromatography. The separation was performed on a Macherey-Nagel C8 analytical column (4 × 125 mm, 5 µm), with a flow rate of 0.5 ml min-1 and detection at 268, 270 and 350 nm, for SMZ, TMP and DOXY, respectively. All measurements were performed in acetonitrile-water (45:55 v/v; pH 3.0). The analytical curves were linear (r > 0.9997) in the concentration range of 5.0-35.0 µg ml-1 for SMZ, 1.0-7.0 µg ml-1 for TMP and 7.0-13.0 µg ml-1 for DOXY. The method proved to be precise, robust, accurate and selective. In accelerated stability, the sample was analyzed for 6 months, with no major variations observed in organoleptic analysis and pH. Therefore, the developed method was proved to be suitable for routine quality control analyses for the simultaneous determination of SMZ, TMP and DOXY in pharmaceutical formulations.

The occurrence of heavy metals and antimicrobials in sewage sludge and their predicted risk to soil - Is there anything to fear?

The study assessed the occurrence of legally-monitored heavy metals and unmonitored antimicrobials in sludge from small, medium, large and very large municipal wastewater treatment plants (WWTPs), and the predicted environmental risk and risk of resistance selection associated with sludge administration to soil. The temporal variations of the studied compounds in sludge and associated risks to soil were determined by sampling over a year. Although the highest concentrations of heavy metals were noted in sludge from the largest WWTP, i.e. from 1.50 mg/kg (mean 1.61 mg/kg) for Cd to 2188 mg/kg (mean 1332 mg/kg) for Zn, the obtained values only reached a few percent of the legal limits. The same WWTP also demonstrated lower concentrations of antimicrobials compared to the smaller ones. The highest concentrations of antimicrobials, ranging from 24.04 µg/kg for trimethoprim to 900.24 µg/kg for tetracycline, were found in the small and medium WWTPs. However, due to lack of regulations at the national and EU levels, the results cannot be compared with legal limits. Principal Component Analysis (PCA), cluster and heatmap analysis separated samples according to WWTP size. Small WWTP demonstrated correlation with antimicrobials (tetracycline, trimethoprim, clindamycin, ciprofloxacin and ofloxacin), while the large and very large WWTP revealed correlations with heavy metals (Cu and Cr). The obtained environmental risk quotients confirmed that the heavy metals did not present a threat, measured either as individual risk quotients (RQenv), cumulative risk (RQcumulative) or risk of mixture of heavy metals (RQmix-metals). In the case of antimicrobials, only tetracycline demonstrated moderate RQenv, RQcumulative and RQmix-antimicrobials in the small WWTP sludge, with values of 0.1 to 1. Our findings highlight the importance of monitoring sewage sludge before soil application, especially from small WWTPs, to reduce the potential environmental impact of antimicrobials. They also confirm our previous data regarding the environmental risk associated with various toxic compounds, including emerging contaminants, in the sludge from small WWTPs.

Aged polyamide microplastics enhance the adsorption of trimethoprim in soil environments.

Microplastics (MPs) in the environment typically age. However, the influence of aged MPs on the adsorption of antibiotics in soil remains unknown. In this study, the adsorption behavior of trimethoprim (TMP) on soil and soil containing aged polyamide (PA) was investigated using batch and stirred flow chamber experiments. The adsorption of TMP on the tested soil with and without PA was fast, with the ka values ranging from 50.5 to 55.6 L (mg min)-1. The adsorption of TMP on aged PA was more than 20 times larger than that on the tested soil, which resulted in an "enrichment effect." Furthermore, aged PA altered the pH of the reaction system, thereby enhancing the adsorption of TMP. Consequently, the Kd values of TMP for soil, soil containing 5%, and 10% aged PA were 5.64, 12.38, and 23.65 L kg-1, respectively. The effect of aged PA on the adsorption of TMP on soil depended on pH values. However, TMP adsorption on soil containing 10% aged PA was constantly higher (p < 0.01) than that on soil with NaCl concentrations ranging from 0 to 50 mmol L-1. These findings provide new insights into the effect of environmental MPs on the fate and transport of antibiotics in soil environments.

The contradictory roles of tightly bound and loosely bound extracellular polymeric substances of activated sludge in trimethoprim adsorption process.

Extracellular polymeric substances (EPS) of activated sludge are a mixture of high molecular weight polymers secreted by microorganisms, which have the double structure of tightly-bound EPS (TB-EPS) in inner layer and loosely-bound EPS (LB-EPS) in outer layer. The characteristic of LB- and TB-EPS were different, which would affect their adsorption of antibiotics. However, the adsorption process of antibiotics on LB- and TB-EPS was still unclear yet. Therefore, in this work, the roles of LB-EPS and TB-EPS in adsorption of a typical antibiotic-trimethoprim (TMP) at environmentally relevant concentration (25.0 µg/L) were investigated. The results showed the content of TB-EPS was higher than that of LB-EPS, which was 17.08 and 10.36 mg/g VSS, respectively. The adsorption capacity of raw, LB-EPS extracted and both LB- and TB-EPS extracted activated sludges for TMP were 5.31, 4.65 and 9.51 µg/g VSS, respectively, which indicated LB-EPS had positive effect on TMP removal, while TB-EPS had negative effect. The adsorption process can be well described by a pseudo-second-order kinetic model (R2 > 0.980). The ratio of different functional groups was calculated and the CO and C-O bond might be responsible for the adsorption capacity difference between LB- and TB-EPS. The fluorescence quenching results indicated that tryptophan protein-like substances in LB-EPS provided more binding sites (n = 0.36) than that of tryptophan amino acid in TB-EPS (n = 0.1). Furthermore, the extend DLVO results also demonstrated that LB-EPS promoted the adsorption of TMP, while TB-EPS inhibited the process. We hope the results of this study were helpful for understanding the fate of antibiotics in wastewater treatment systems.

Control of a sulfadoxine/trimethoprim combination in the competition horse: Elimination, metabolism and detection following an intravenous administration.

The combination of sulfadoxine (SDO) with trimethoprim (TMP) is widely used in veterinarian medicine. The aim of the present study was to compare excretion profiles and detection time windows of SDO and TMP in plasma and urine by means of a validated quantitative method. Eight horses received a single intravenous (i.v.) dose of 2.7 mg TMP and 13.4 mg SDO per kg bodyweight. Plasma and urine samples were collected up to 15 and 70 days post-administration, respectively. While urine samples underwent an enzymatic hydrolysis, plasma samples were proteolysed before further analysis. After solid-phase extraction, samples were analysed by liquid chromatography/electrospray ionisation tandem mass spectrometry in positive ionisation mode. The applied multiple reaction monitoring (MRM) method allowed the detection of SDO and TMP with a lower limit of detection of 0.03 ng/mL in plasma and 0.2 (SDO) and 0.4 ng/mL (TMP) in urine, respectively. In the present study, detection times for SDO were 15 days in plasma and 49 days in urine, respectively. TMP was detected for up to 7 days in plasma and up to 50 days in urine, respectively. The detection via the TMP metabolite 3-desmethyl-trimethoprim was possible for 70 days in urine. Detection times of the other confirmed metabolites N4 -acetylated sulfadoxine, hydroxytrimethoprim, trimethoprim-1-oxide and trimethoprim-3-oxide were significantly lower. In order to postulate reasonable screening limits (SLs) to control specific withdrawal times, a Monte Carlo simulation was performed for SDO. The proposed SL of 10 ng/mL SDO in blood and 300 ng/mL urine corresponds to a detection time of 4 days.

Mesocosm experiment to determine the contribution of adsorption, biodegradation, hydrolysis and photodegradation in the attenuation of antibiotics at the water sediment interface.

To understand the fate of antibiotics in the aquatic environment, we need to evaluate to which extent the following processes contribute to the overall antibiotic attenuation: adsorption to river sediment, biodegradation, hydrolysis and photodegradation. A laboratory scale mesocosm experiment was conducted in 10 L reactors filled with river sediment and water. The reactors were spiked with four classes of antibiotics (fluoroquinolones, macrolides, sulfonamides, tetracyclines), as well as clindamycin and trimethoprim. The experimental-set-up was designed to study the attenuation processes in parallel in one mesocosm experiment, hence also considering synergetic effects. Our results showed that antibiotics belonging to the same class exhibited similar behavior. Adsorption was the main attenuation process for the fluoroquinolones and tetracyclines (44.4 to 80.0 %). For the sulfonamides, biodegradation was the most frequent process (50.2 to 65.1 %). Hydrolysis appeared to be significant only for tetracyclines (12.6 to 41.8 %). Photodegradation through visible light played a minor role for most of the antibiotics - fluoroquinolones, sulfonamides, and trimethoprim (0.7 to 24.7 %). The macrolides were the only class of antibiotics not affected by the studied processes and they persisted in the water phase. Based on our results, we propose to class the antibiotics in three groups according to their persistence in the water phase. Fluoroquinolones and tetracyclines were non-persistent (half-lives shorter than 11 d). Chlorotetracycline, sulfapyridine and trimethoprim showed a moderate persistence (half-lives between 12 and 35 d). Due to half-lives longer than 36 d sulfonamides and clindamycin were classified as persistent.

Presence and Depletion of Sulfadiazine, Trimethoprim, and Oxytetracycline into Feathers of Treated Broiler Chickens and Impact on Antibiotic-Resistant Bacteria.

The valorization of poultry byproducts, like feathers (processed to feather meal), in animal feed could contribute to the presence of veterinary drugs, including antibiotics. An animal study was carried out to study the fate of sulfadiazine, trimethoprim, and oxytetracycline in feathers, plasma, and droppings of broiler chickens. Cage and floor housing, different from current farm practices, were studied. Samples were analyzed by liquid chromatography-tandem mass spectrometry (LC-MS/MS). A longer presence of antibiotics was observed in feathers compared to plasma, with sulfadiazine being present the most. The internal presence (via blood) and the external presence (via droppings) of antibiotics in/on feathers were shown. Analysis of Escherichia coli populations, from droppings and feathers, highlighted that resistant bacteria could be transferred from droppings to feathers in floor-housed animals. The overall results suggest that feathers are a potential reservoir of antimicrobial residues and could contribute to the selection of antibiotic-resistant bacteria in the environment, animals, and humans.

Study of the Phytoextraction and Phytodegradation of Sulfamethoxazole and Trimethoprim from Water by Limnobium laevigatum.

Phytoremediation is an environmentally friendly and economical method for removing organic contaminants from water. The purpose of the present study was to use Limnobium laevigatum for the phytoremediation of water from sulfamethoxazole (SMX) and trimethoprim (TRI) residues. The experiment was conducted for 14 days, in which the loss of the pharmaceuticals in water and their concentration in plant tissues was monitored. Determination of SMX and TRI was conducted using liquid chromatography coupled with tandem mass spectrometry. The results revealed that various factors affected the removal of the contaminants from water, and their bioaccumulation coefficients were obtained. Additionally, the transformation products of SMX and TRI were identified. The observed decrease in SMX and TRI content after 14 days was 96.0% and 75.4% in water, respectively. SMX removal mainly involved photolysis and hydrolysis processes, whereas TRI was mostly absorbed by the plant. Bioaccumulation coefficients of the freeze-dried plant were in the range of 0.043-0.147 for SMX and 2.369-2.588 for TRI. Nine and six transformation products related to SMX and TRI, respectively, were identified in water and plant tissues. The detected transformation products stemmed from metabolic transformations and photolysis of the parent compounds.

Validation of a LC-MS/MS method for the quantitative analysis of four antibiotics in pig tissues and plasma to assess the risk of transfer of residues to edible matrices after exposure to cross-contaminated feed.

Cross-contamination between medicated and non-medicated feed can occur during production, processing, transport or storage of animal feed. This may lead to the presence of low concentrations of antibiotics in supposedly drug-free feed for food production animals, which potentially could also harm consumers due to residues. In addition, consumption of sub-therapeutic concentrations of antibiotics may increase the risk of emergence of resistant bacteria. In this study, LC-MS/MS methods were developed to quantify four antibiotics (sulfadimethoxine, oxytetracycline, trimethoprim and amoxicillin) in several pig matrices, i.e. plasma, muscle, liver, kidneys and faeces. All methods were validated using the accuracy profile, except for amoxicillin in faeces, for which extraction could not be optimised for low concentrations. These methods were then applied as part of an animal study during which several pigs received contaminated feed at a concentration corresponding to 2% of therapeutic dose, in order to evaluate the risk of the presence of residues in animal faeces and tissues. The results showed that sulfadimethoxine is well absorbed and accumulates in the muscle, kidneys and liver, where concentrations were higher than the maximum residue limits (MRLs) authorised in EU legislation. Conversely, oxytetracycline was mostly found in faeces as its oral absorption is very low. Trimethoprim concentrations were slightly higher than the tolerated MRL in the kidneys, but they were below this level in the other tissues. Finally, amoxicillin concentrations remained below the lower limit of quantification of the methods in all matrices.

[Historical Antibiotic Stress Changed the Effects of Sulfamethoxazole and Trimethoprim on Activated Sludge: ARGs and Potential Hosts].

The co-exposure of antibiotics has important effects on antibiotic resistance genes (ARGs) and microbial community aggregation in wastewater treatment plants (WWTPs). However, it is unclear whether differences in historical antibiotic exposure stress can determine responses of microbes and ARGs to combined antibiotics. By selecting a high concentration (30 mg·L-1) of sulfamethoxazole (SMX) and trimethoprim (TMP) as historical exposure stress conditions, the effects of SMX and TMP-combined pollution on ARGs, bacterial communities, and their interactions were explored in short-term experiments. Based on high-throughput quantitative PCR, a total of 13 ARGs were detected, and the absolute abundance was 2.21-5.42 copies·µL-1 (logarithm, DNA, the same below). Among them, sul2, ermB, mefA, and tetM-01 were the main subtypes in the samples, and the absolute abundance was between 2.95 and 5.40 copies·µL-1. The combined contamination of SMX and TMP could cause the enrichment of ARGs and mobile genetic elements (MGEs); however, their effects on each subtype were different, and the historical legacy effect of SMX was higher than that of TMP. Under the different exposure histories, the co-occurrence and co-exclusion patterns existed between ARGs. Moreover, MGEs (especially intI-1) were significantly correlated with sulfonamides (sul1 and sul2), tetracyclines[tet(32)], and macrolide-lincosamide-streptogramin (MLSB) resistance genes (ermB). Based on the full-scale classification of microorganisms, it was found that the microbial community structure of various groups responded differently to combined pollution, and the conditionally abundant taxa (CAT) were obviously enriched. Thauera, Pseudoxanthomonas, and Paracoccus were the dominant resistant bacterial genera. Furthermore, a total of 31 potential hosts of ARGs were identified with network analysis, which were dominated with conditionally rare taxa (CRT). Particularly, Candidatus_Alysiosphaera and Fusibacter were positively correlated with most of the ARGs, being the common protentional hosts. Importantly, some rare genera (RT, Variibacter, Aeromonas, Cloacibacterium, etc.) were potential hosts of transposon IS613, which played an important role in the proliferation and spread of ARGs. In conclusion, this study revealed the legacy effects of historical antibiotic stress on ARGs and their hosts, which could provide new ideas and theoretical basis for reducing ARGs pollution in WWTPs.

Effects of ciprofloxacin, trimethoprim, and amoxicillin on microbial structure and growth as emerging pollutants reaching crop soils.

The presence of emerging pollutants, and specifically antibiotics, in agricultural soils has increased notably in recent decades, causing growing concern as regards potential environmental and health issues. With this in mind, the current study focuses on evaluating the toxicity exerted by three antibiotics (amoxicillin, trimethoprim, and ciprofloxacin) on the growth of soil bacterial communities, when these pollutants are present at different doses, and considered in the short, medium, and long terms (1, 8 and 42 days of incubation). Specifically, the research was carried out in 12 agricultural soils having different physicochemical characteristics and was performed by means of the leucine (3H) incorporation method. In addition, changes in the structure of soil microbial communities at 8 and 42 days were studied in four of these soils, using the phospholipids of fatty acids method for this. The main results indicate that the most toxic antibiotic was amoxicillin, followed by trimethoprim and ciprofloxacin. The results also show that the toxicity of amoxicillin decreases with time, with values of Log IC50 ranging from 0.07 ± 0.05 to 3.43 ± 0.08 for day 1, from 0.95 ± 0.07 to 3.97 ± 0.15 for day 8, and from 2.05 ± 0.03 to 3.18 ± 0.04 for day 42, during the incubation period. Regarding trimethoprim, 3 different behaviors were observed: for some soils the growth of soil bacterial communities was not affected, for a second group of soils trimethoprim toxicity showed dose-response effects that remained persistent over time, and, finally, for a third group of soils the toxicity of trimethoprim increased over time, being greater for longer incubation times (42 days). As regards ciprofloxacin, this antibiotic did not show a toxicity effect on the growth of soil bacterial communities for any of the soils or incubation times studied. Furthermore, the principal component analysis performed with the phospholipids of fatty acids results demonstrated that the microbial community structure of these agricultural soils, which persisted after 42 days of incubation, depended mainly on soil characteristics and, to a lesser extent, on the dose and type of antibiotic (amoxicillin, trimethoprim or ciprofloxacin). In addition, it was found that, in this research, the application of the three antibiotics to soils usually favored the presence of fungi and Gram-positive bacteria.

Simultaneous quantification of trimethoprim metabolites in pediatric plasma.

The dual agent antibiotic, trimethoprim/sulfamethoxazole (TMP-SMX), has been prescribed to treat or prevent infections for over 50 years. However, there are no published validated analytical methods for the measurement of TMP metabolites in humans. We developed methodology enabling reliable quantification of TMP and 5 metabolites in human plasma. Chromatographic separation was achieved in less than 8 min using a biphenyl column. Analytes were detected in positive electrospray mode using a tandem Waters Xevo-TQ-XS mass spectrometer. Precision and accuracy values for all analytes were within 15% of nominal values during assay validation.

Antibiotic standards stored as a mixture in water: methanol are unstable at various temperatures irrespective of pH and glass container silanization.

It is well-established that antibiotics stored individually at their optimal pH and in appropriate solvents are stable over time. However, limited information exists on the stability of antibiotics from multiple classes when prepared and stored as a mixture prior to multiresidue analysis by mass spectrometry. This study tested the stability of antibiotic standard mixtures from eight classes [amphenicols, tetracyclines, sulfonamides, quinolones, macrolides, ß-lactams, lincosamides and miscellaneous (i.e., trimethoprim)] in relation to the water:methanol ratio, presence of sodium hydroxide base (to solubilise quinolones), storage temperature, and container type including plain and silanized glass vials. Antibiotics were analysed by ultra-high-performance liquid chromatography coupled to tandem mass spectrometry. Several antibiotics, mainly quinolones, tetracyclines and macrolides, were unstable when stored as mixtures for one week regardless of the water:methanol ratio, storage temperature (4, -20 or -80 °C) and presence/absence of sodium hydroxide. Silanization of glassware improved the storage stability of quinolones and macrolides but reduced the stability of tetracyclines and other antibiotics including florfenicol amine, penicillin G, erythromycin and sulfadiazine. Our results show that several antibiotics in water:methanol are unstable when stored as a mixture and suggest a limited advantage of using base or silanized glass vials for the preparation and storage of antibiotic standards mixed together. Freshly prepared antibiotic standard mixtures are recommended for multi-residue quantitation of antibiotics.Abbreviations AMOX: amoxicillin; AMP: ampicillin; AZ: azithromycin; CAP: chloramphenicol; CE: collision energy; CTC: chlortetracycline; CIP: ciprofloxacin; DOX: doxycycline; ENO: enoxacin; ENRO: enrofloxacin; ERYTH: erythromycin; FF: florfenicol; FFA: florfenicol amine; FLU: flumequine; HDPE: high-density polyethylene; LC-MS/MS: liquid chromatography-tandem mass spectrometry; LIN: lincomycin; MRM: multiple reaction monitoring; NOR: norfloxacin; OFL-D3: ofloxacin-D3; OXO: oxolinic acid; OTC: oxytetracycline; PEN-G: penicillin G; PEN-V: penicillin V; ROX: roxithromycin; SDM: sulfadimethoxine; SDZ: sulfadiazine; SMX: sulfamethoxazole; SMZ-D4: sulfamethazine-D4; SSZ: sulfasalazine; TC: tetracycline; TAP: thiamphenicol; TILM: tilmicosin; TRIM: trimethoprim; TL: tolerance limit; VIRG: virginiamycin; UPLC-MS/MS: ultra-high pressure liquid chromatography-tandem mass spectrometry.

Rapid determination of sulfamethoxazole and trimethoprim illegally added to health products using excitation-emission matrix fluorescence coupled with the second-order calibration method.

In this work, a simple and fast analytical method based on a self-weighted alternating trilinear decomposition (SWATLD) algorithm coupled with excitation-emission matrix (EEM) fluorescence was developed for the simultaneous determination of sulfamethoxazole (SMZ) and trimethoprim (TMP) illegally added to health products. With the second-order advantage, the proposed method obtained satisfactory results in the presence of peak overlap and unknown interferences. The analysis time for a single sample is only 0.8 minutes. The average spiked recoveries of SMZ and TMP in three health product spiked samples were in the range of 91.0-106.2% and 86.8-107.8%, respectively. The relative standard deviations (RSDs) were lower than 8.6%. In addition, verification parameters including sensitivity (SEN), selectivity (SEL), the limit of detection (LOD), the limit of quantification (LOQ), intra-day precision, and inter-day precision were calculated, and the results show that the proposed method is feasible. The quantitative results of the proposed method were further confirmed by the LC-MS/MS method, which proved that the proposed method was efficient and green for drug-abuse monitoring of SMZ and TMP in health products.

Magnetic solid-phase extraction based on carbon nanotubes for determination of sulfamethoxazole, acetyl sulfamethoxazole and aditoprim residues in edible swine tissues with liquid chromatography tandem mass spectrometry.

Sulphonamides (SAs) are widely used in animal husbandry. In our work, based on multi-walled carbon nanotubes, a novel residue method was developed for highly sensitive and determination trace levels of sulfamethoxazole, acetyl sulfamethoxazole and aditoprim in edible swine tissues by LC-MS/MS with magnetic solid-phase extraction. The samples were extracted using 2% ammoniated acetonitrile and purified by magnetic solid phase extraction (MSPE). Under the optimal conditions, good linearity was obtained ranging from 5 to 160 µg kg-1. The limits of detection (LOD) and quantification (LOQ) were 2 µg kg-1 and 5 µg kg-1 respectively. The average recoveries were 73.9-94.8% at different spiking levels. The inter-day RSDs were 6.2-10.7% and the intra-day RSDs were 2.4-5.4%. MSPE based on multi-walled carbon nanotubes was a simple and efficient method to enrich and separate the analyses and could be successfully applied for extraction of sulfamethoxazole, acetyl sulfamethoxazole and aditoprim residues in swine tissues.

Salinity-independent dissipation of antibiotics from flooded tropical soil: a microcosm study.

River deltas are frequently facing salinity intrusion, thus challenging agricultural production in these areas. One adaption strategy to increasing salinity is shrimp production, which however, heavily relies on antibiotic usage. This study was performed to evaluate the effect of increasing salinity on the dissipation rates of antibiotics in tropical flooded soil systems. For this purpose, paddy top soil from a coastal Vietnamese delta was spiked with selected frequently used antibiotics (sulfadiazine, sulfamethazine, sulfamethoxazole, trimethoprim) and incubated with flood water of different salt concentrations (0, 10, 20 g L-1). Antibiotic concentrations were monitored in water and soil phases over a period of 112 days using liquid chromatography and tandem mass spectrometry. We found that sulfamethazine was the most persistent antibiotic in the flooded soil system (DT50 = 77 days), followed by sulfadiazine (DT50 = 53 days), trimethoprim (DT50 = 3 days) and sulfamethoxazole (DT50 = 1 days). With the exception of sulfamethoxazole, the apparent distribution coefficient increased significantly (p < 0.05) for all antibiotics in course of the incubation, which indicates an accumulation of antibiotics in soil. On a whole system basis, including soil and water into the assessment, there was no overall salinity effect on the dissipation rates of antibiotics, suggesting that common e-fate models remain valid under varying salinity.

Occurrence and toxicity of antibiotics in the aquatic environment: A review.

In recent years, antibiotics have been used for human and animal disease treatment, growth promotion, and prophylaxis, and their consumption is rising worldwide. Antibiotics are often not fully metabolized by the body and are released into the aquatic environment, where they may have negative effects on the non-target species. This review examines the recent researches on eight representative antibiotics (erythromycin, trimethoprim, sulfamethoxazole, tetracycline, oxytetracycline, ofloxacin, ciprofloxacin, and amoxicillin). A detailed overview of their concentrations in surface waters, groundwater, and effluents is provided, supported by recent global human consumption and veterinary use data. Furthermore, we review the ecotoxicity of these antibiotics towards different groups of organisms, and assessment of the environmental risks to aquatic organisms. This review discusses and compares the suitability of currently used ecotoxicological bioassays, and identifies the knowledge gaps and future challenges. The risk data indicate that selected antibiotics may pose a threat to aquatic environments. Cyanobacteria were the most sensitive organisms when using standard ecotoxicological bioassays. Further studies on their chronic effects to aquatic organisms and the toxicity of antibiotic mixtures are necessary to fully understand the hazards these antibiotics present.

Tuning down the environmental interests of organoclays for emerging pollutants: Pharmaceuticals in presence of electrolytes.

The impact of electrolytes on the adsorption of emerging pollutants: pharmaceuticals onto layered materials: a raw clay mineral and its nonionic and cationic organoclay derivatives was studied. The selected pharmaceuticals: amoxicillin, norfloxacin, sulfamethoxazole, metoprolol, carbamazepine, and trimethoprim show different electric charges: zwitterionic, anionic, cationic and neutral and hydrophobic character (different LogP). Without any salts, the set of complementary data obtained by UV and infrared spectroscopies, X-ray diffraction points out the importance of the electric charge which represents a key parameter in both the spontaneity and feasibility of the adsorption. In contrast, the hydrophobicity of the analytes plays a minor role but determines the magnitude of the adsorbed amount of pharmaceuticals onto organoclays. With a dual hydrophilic and hydrophobic behavior, nonionic organoclay appears to be the most polyvalent material for the removal of the pharmaceuticals. In the presence of electrolytes (NaCl at a concentration of 1 × 10-2 mol L-1), both nonionic and cationic organoclays show a decrease of their efficiencies, whereas the adsorption is particularly enhanced for Na-Mt except for the cationic species (trimethoprim and metoprolol). Thus, in realistic experimental conditions close to those of natural effluents, raw clay mineral appears as the most appropriate sorbent for the studied pharmaceuticals while it raises the question of the usefulness of organoclays in water remediation strategy.

A simple and high-throughput method for multiresidue and multiclass quantitation of antimicrobials in pangasius (Pangasionodon hypophthalmus) fillet by liquid chromatography coupled with tandem mass spectrometry.

The development and validation of a throughput method for the determination of 25 antibacterial drugs (two ß-lactams, eight quinolones, two macrolides, five sulfonamides, trimethoprim, four tetracyclines and three amphenicols) in pangasius fish muscle by LC-MS/MS were performed. A simple, efficient and fast extraction procedure was developed using acetonitrile and a 0.1 M EDTA solution as solvents for extraction. All compounds were determined in a single run, and chromatographic separation was achieved using a Zorbax SB C18 column with a mobile phase comprised of purified water +0.1% formic acid (A) and acetonitrile +0.1% formic acid (B) in a linear gradient program. The method was validated aαording to the requirements of European Decision 2002/657/EC. To quantify the analytes, matrix-matched analytical curves were constructed with spiked blank tissues and showed linearity (r2) higher than 0.99. For all analytes, the precision and accuracy were determined at the levels of 3 ng/g (low), 10 ng/g (low-middle), 50 ng/g (high-middle) and 100 ng/g (high). The precision (CV%) was lower than 18.6% and the accuracy (determined as recovery) was between 65% and 119%. The limit of quantitation was 3.0 ng/g, with the exception of chloramphenicol, which was 0.3 ng/g, and amoxicillin and doxycycline, which were 10 ng/g. The method was successfully applied to analyze pangasius muscle samples from Vietnam available at the Brazilian retail market, and 5 out of 40 samples showed the presence of low-residue levels of enrofloxacin and, consequently, must be considered out of conformity. It is recommended that competent authorities should avoid the commercialization of pangasius fillet contaminated with residues of this veterinary drug.

Presence and environmental risk assessment of selected antibiotics in coastal water adjacent to mariculture areas in the Bohai Sea.

The presence and concentrations of 25 antibiotics in Dalian coastal water of the Bohai Sea were investigated using solid-phase extraction coupled with high-performance liquid chromatography tandem mass spectrometry. Results showed that antibiotics were widely detected in this region with total concentration ranging from 22.6 to 2402.4 ng/L. Enrofloxacin and trimethoprim were 100% detected followed by sulfamethoxazole with a detection rate of 90.9%. No significant correlations were found between antibiotics concentrations and sample parameters such as dissolved organic carbon, salinity, and distance from the coast, suggesting that concentrations and distributions of the antibiotics in this area were source-dependent. Antibiotic concentration in the sample from an offshore cage-culture area was the highest. Based on composition profiles, mariculture was supposed to be an important source of antibiotics. According to the assessment, individual antibiotic posed low to moderate risk, while the antibiotic mixture presented high risk. Enrofloxacin, clarithromycin and sulfamethoxazole, the top three contributors to the mixture risk quotients for each site, need priority control in this area. Besides, levels of enrofloxacin were high enough to exert a selective pressure on bacteria that may lead to an increase in the prevalence of resistance.