Thermal and Combustion Properties of Biomass-Based Flame-Retardant Polyurethane Foams Containing P and N.

ABSTRACT

Biomass has been widely used due to its environmental friendliness, sustainability, and low toxicity. In this study, aminophosphorylated cellulose (PNC), a biomass flame retardant containing phosphorus and nitrogen, was synthesized by esterification from cellulose and introduced into polyurethane to prepare flame-retardant rigid polyurethane foam. The combustion properties of the PU and PU/PNC composites were studied using the limiting oxygen index (LOI), UL-94, and cone calorimeter (CCT) methods. The thermal degradation behavior of the PU and PU/PNC composites was analyzed by thermogravimetric analysis (TGA) and thermogravimetric infrared spectroscopy (TG-IR). The char layer after combustion was characterized using SEM, Raman, and XPS. The experimental results showed that the introduction of PNC significantly improved the flame-retardant effect and safety of PU/PNC composites. Adding 15 wt% PNC to PU resulted in a vertical burning grade of V-0 and a limiting oxygen index of 23.5%. Compared to the pure sample, the residual char content of PU/PNC15 in a nitrogen atmosphere increased by 181%, and the total heat release (THR) decreased by 56.3%. A Raman analysis of the char layer after CCT combustion revealed that the ID/IG ratio of PU/PNC15 decreased from 4.11 to 3.61, indicating that the flame retardant could increase the stability of the char layer. The TG-IR results showed that PNC diluted the concentration of O2 and combustible gases by releasing inert gases such as CO2. These findings suggest that the developed PU/PNC composites have significant potential for real-world applications, particularly in industries requiring enhanced fire safety, such as construction, transportation, and electronics. The use of PNC provides an eco-friendly alternative to traditional flame retardants. This research paves the way for the development of safer, more sustainable, and environmentally friendly fire-resistant materials for a wide range of applications.