The impact of influent nutrient ratios and biochemical reactions on oxygen transfer in an EBPR process--a theoretical explanation.

ABSTRACT

In this investigation, a laboratory-scale enhanced biological phosphorus removal (EBPR) process was operated under controlled conditions to study the impact of varying the influent ratio of chemical oxygen demand (COD), total Kjeldahl nitrogen (TKN) and total phosphorus (TP), and the consequential biochemical reactions on oxygen transfer parameters. The data showed that the experiment with high influent phosphorus relative to nitrogen (COD/TP = 51 and TKN/TP = 3.1) achieved higher alpha and oxygen transfer efficiency (OTE(f)). On the other hand, the experiment with high influent nitrogen relative to phosphorus (TKN/TP = 14.7 and COD/TP = 129) resulted in approximately 50% reduction in alpha and OTE(f) under similar organic loading. This suggested that the intracellular carbon storage and the enhanced biological P removal phenomenon associated with the phosphorus-accumulating organisms (PAOs) had a positive influence on OTE(f) in the high phosphorus experiment compared to an active population of nitrifying and denitrifying organisms in the high nitrogen experiment. The intracellular carbon storage by the glycogen-accumulating organisms also appeared to have had a positive effect on oxygen transfer efficiency, although to a lesser extent in comparison to the PAOs. It was also found that oxygen uptake rate (OUR) was not a good indicator of the measured alpha and OTE(f), because it was a combined effect of several biochemical reactions, each having a varying degree of influence. It is difficult to underestimate the crucial role of flocs in mass transfer of oxygen, because microorganisms associated with flocs carry out the biochemical reactions. It seems that the combination of influent characteristics and biochemical reactions in each experiment produced a unique biomass quality (determined by the biomass N to P ratio), ultimately affecting the mass transfer of oxygen. A theoretical explanation for the observed oxygen transfer efficiency under the process conditions is also proposed in this article.