In vitro study on marginal and internal fit of CAD/CAM all-ceramic crowns.
Dent Mater J
; 24(3): 456-9, 2005 Sep.
Article
em En
| MEDLINE
| ID: mdl-16279739
ABSTRACT
The purpose of this study was to evaluate the marginal and internal fit of all-ceramic crowns fabricated using the Decsy CAD/CAM system. A master die of maxillary first premolar was measured, and experimental crowns were fabricated. Four conditions were established by combining two convergence angles (4 degrees and 12 degrees) of the abutment with two different luting space settings (15 microm and 55 microm). The results showed that the experimental crowns had a marginal gap of 42 to 56 microm. When the luting space setting was 15 microm, the internal gap was 85-88 microm; when the setting was 55 microm, the internal gap was 126-138 microm. The marginal gap for each experimental crown met the clinically acceptable criterion.
Buscar no Google
Coleções:
01-internacional
Base de dados:
MEDLINE
Assunto principal:
Cerâmica
/
Planejamento de Prótese Dentária
/
Desenho Assistido por Computador
/
Coroas
/
Porcelana Dentária
Limite:
Humans
Idioma:
En
Revista:
Dent Mater J
Ano de publicação:
2005
Tipo de documento:
Article