Electricity generation by microbial fuel cell using microorganisms as catalyst in cathode.
J Microbiol Biotechnol
; 23(12): 1765-73, 2013 Dec.
Article
em En
| MEDLINE
| ID: mdl-24225369
ABSTRACT
The cathode reaction is one of the most seriously limiting factors in a microbial fuel cell (MFC). The critical dissolved oxygen (DO) concentration of a platinum-loaded graphite electrode was reported as 2.2 mg/l, about 10-fold higher than an aerobic bacterium. A series of MFCs were run with the cathode compartment inoculated with activated sludge (biotic) or not (abiotic) on platinum-loaded or bare graphite electrodes. At the beginning of the operation, the current values from MFCs with a biocathode and abiotic cathode were 2.3 ± 0.1 and 2.6 ± 0.2 mA, respectively, at the air-saturated water supply in the cathode. The current from MFCs with an abiotic cathode did not change, but that of MFCs with a biotic cathode increased to 3.0 mA after 8 weeks. The coulomb efficiency was 59.6% in the MFCs with a biotic cathode, much higher than the value of 15.6% of the abiotic cathode. When the DO supply was reduced, the current from MFCs with an abiotic cathode decreased more sharply than in those with a biotic cathode. When the respiratory inhibitor azide was added to the catholyte, the current decreased in MFCs with a biotic cathode but did not change in MFCs with an abiotic cathode. The power density was higher in MFCs with a biotic cathode (430 W/m(3) cathode compartment) than the abiotic cathode MFC (257 W/m(3) cathode compartment). Electron microscopic observation revealed nanowire structures in biofilms that developed on both the anode and on the biocathode. These results show that an electron consuming bacterial consortium can be used as a cathode catalyst to improve the cathode reaction.
Buscar no Google
Coleções:
01-internacional
Base de dados:
MEDLINE
Assunto principal:
Bactérias
/
Fontes de Energia Bioelétrica
/
Fenômenos Fisiológicos Bacterianos
/
Eletricidade
/
Eletrodos
Idioma:
En
Revista:
J Microbiol Biotechnol
Ano de publicação:
2013
Tipo de documento:
Article