Field application of selective precipitation for recovering Cu and Zn in drainage discharged from an operating mine.

ABSTRACT

Acid mine drainage (AMD) generated from mining activities has been recognized as a serious problem due to its increased acidity and high concentration of heavy metals. In this research, a feasibility test of the selective precipitation (SP) process was performed using AMD discharged from a currently operating mine in Korea for the purpose of minimizing the environmental impact of AMD. For the SP process, a pilot scale equipment (100L reaction tank) was used in field and among various metals, Cu and Zn were the target metals. Through the research, it was confirmed that AMD from an operating mine has two disadvantages of being applied to the SP altering water quality and unexpected inclusion of clay debris. Despite unfavorable conditions, Cu and Zn precipitate of 80% purity with 90% precipitation rate was able to be obtained from 1.4L/min (2.0tons/day) AMD. The recovered precipitates were identified as amorphous CuS and ZnS with small amounts of impurities (Si minerals, CuFeS2, and Fe/Al hydroxide). The strategies to reduce these impurities were also discussed. Recovery rate, which is the amount of precipitate collected per unit volume of AMD, was proposed as an indicator to evaluate the working efficiency of the SP process. It was confirmed that the recovery rate was strongly dependent on flow rate and dose of coagulant. The results of this study may be helpful in reducing the potential complications which occurs when SP is applied on field.