Your browser doesn't support javascript.
loading
Ultrathin Multibridge Channel Transistor Enabled by van der Waals Assembly.
Huang, Xiaohe; Liu, Chunsen; Zeng, Senfeng; Tang, Zhaowu; Wang, Shuiyuan; Chen, Xiaozhang; Zhang, David Wei; Zhou, Peng.
Afiliação
  • Huang X; State Key Laboratory of ASIC and System, School of Microelectronics, Fudan University, Shanghai, 200433, China.
  • Liu C; Frontier Institute of Chip and System, Fudan University, Shanghai, 200433, China.
  • Zeng S; State Key Laboratory of ASIC and System, School of Microelectronics, Fudan University, Shanghai, 200433, China.
  • Tang Z; State Key Laboratory of ASIC and System, School of Microelectronics, Fudan University, Shanghai, 200433, China.
  • Wang S; State Key Laboratory of ASIC and System, School of Microelectronics, Fudan University, Shanghai, 200433, China.
  • Chen X; State Key Laboratory of ASIC and System, School of Microelectronics, Fudan University, Shanghai, 200433, China.
  • Zhang DW; National Integrated Circuit Innovation Center, Shanghai, 201203, China.
  • Zhou P; State Key Laboratory of ASIC and System, School of Microelectronics, Fudan University, Shanghai, 200433, China.
Adv Mater ; 33(37): e2102201, 2021 Sep.
Article em En | MEDLINE | ID: mdl-34337802
Multibridge channel field-effect transistors (MBCFETs) enable improved gate control and flow of a large drive current and they are regarded as promising candidates for next-generation transistor architecture. However, in achieving a larger drive current with a thinner channel, limitations arise from the decrease in mobility when the thickness of the Si nanosheet is less than 5 nm. In addition, an increase in the leakage current is unavoidable when a large number of channels are stacked. Here, a 2D ultrathin MBCFET is demonstrate, constructed based on 2 nm/2 nm MoS2 channels. The normalized drive current (23.11 µA*µm µm-1 ) in each level channel of this MBCFET exceeds that of the latest seven-level-stacked Si MBCFET, while the leakage current is only 0.4% of this value, with the subthreshold swing reaching 60 mV dec-1 and an on/off ratio reaching up to 4 × 108 at room temperature. Furthermore, the drive current of this 2D ultrathin MBCFET can be further increased by regulating the polarity of the operation voltage to reduce the injection barrier. The combination of 2D materials and an MBC structure has the potential for use in high-performance and low-power-consumption electronics.
Palavras-chave

Texto completo: 1 Coleções: 01-internacional Base de dados: MEDLINE Idioma: En Revista: Adv Mater Ano de publicação: 2021 Tipo de documento: Article

Texto completo: 1 Coleções: 01-internacional Base de dados: MEDLINE Idioma: En Revista: Adv Mater Ano de publicação: 2021 Tipo de documento: Article