Evaluation of the accuracy of cone beam computed tomography (CBCT) generated tooth replicas with application in autotransplantation.

ABSTRACT

OBJECTIVES: The primary aim of this study was to assess the linear and geometric accuracy of 3-dimensional (3D) printed tooth replicas when compared to the actual tooth. The secondary aims were to compare the accuracy of three different 3D printers and to evaluate dimensional changes of tooth replicas after sterilization. METHODS: A sample of 16 teeth were selected from recruited patients. Segmentation was carried out to generate files from the patient's cone beam computed tomography (CBCT) data, Tooth replicas were then printed using three printers making use of Polyjet, laser stereolithography (SLA) and digital light processing (DLP) technology respectively. These replicas, along with the actual tooth, were scanned by an optical scanner. Replicas were sent for sterilization and scanned again. Paired superimposition of the scans was performed. RESULTS: A mean length difference of 0.36 mm and mean geometric (root mean square [RMS]) difference of 0.56 mm was found. Qualitative analysis showed that the replicas were generally larger in size. Repeated ANOVA tests showed that the Polyjet printer had the highest accuracy (p<0.0001). After sterilization, there was an overall mean length difference of 0.10 mm and RMS deviation of 0.02 mm. CONCLUSION: This study found that there was a significant difference in linear and geometric measurements of the tooth replicas when compared to the actual tooth. This study also provides evidence that the printer which made use of Polyjet technology was able to produce more accurate models than SLA or DLP printers. Printed tooth models demonstrated clinically insignificant changes after heat sterilization. CLINICAL SIGNIFICANCE: 3D printed tooth replicas derived from the patient's CBCT data may be used in autotransplantation to increase predictability of the procedure. In order for this novel digital approach to realize its potential, it is critical to address questions as to how accurate the various printing technologies are in fabricating replicas.