Theoretical modeling and ultra-thin design for multi-junction solar cells with a light-trapping front surface and its application to InGaP/GaAs/InGaAs 3-junction.

ABSTRACT

Light-trapping design is a good strategy to obtain ultra-thin solar cells without sacrificing conversion efficiency. If applied to III-V compound multi-junction solar cells (MJSCs), it not only can greatly reduce the cell cost and weight, but also improve its radiation tolerance when operating in space. This paper formulates all subcell absorptance in an arbitrary N-junction solar cell with an ideal front textured surface and perfect rear mirror, including the effects of complex absorption and luminescence coupling in the stack. Taking the well-known InGaP/GaAs/InGaAs triple-junction solar cell (3J) for instance, the ultra-thin design and the conversion efficiency both in radiative limit and that with subcell internal radiative efficiency below-unity are predicted. Our results show that such front-textured 3J with top-subcell thickness varying from 200 to 500 nm can enhance light absorption so significantly that more than 28% of top-subcell, 56% of middle-subcell, and 90% of bottom-subcell thickness will be cut down when compared with the smooth-surfaced 3J. Typically, (350 nm, 315 nm, 28 nm) is recommended as the optimal design for the front-textured 3J with an experimental efficiency of over 38%. For the same benchmarks on photocurrent of 15.1 mA/cm2 or detailed balance limit of 44%, the minimum total thickness (all subcells only) in the front-textured 3J is only 1453 nm, that is even 71% of that in the rear-textured 3J, quantitatively revealing front texturization has a greater potential for material cut-down than rear texturization. Finally, the impacts of non-ideal scattering texturization on cell performance and ultra-thin design are also discussed. This work provides theoretical guidance for experimental studies on ultra-thin and high-efficient MJSCs with various light-trapping strategies.