Necking Reduction at Low Temperature in Aspect Ratio Etching of SiO2 at CF4/H2/Ar Plasma.
Nanomaterials (Basel)
; 14(2)2024 Jan 17.
Article
em En
| MEDLINE
| ID: mdl-38251172
ABSTRACT
This study investigated the effect of temperature on the aspect-ratio etching of SiO2 in CF4/H2/Ar plasma using patterned samples of a 200 nm trench in a low-temperature reactive-ion etching system. Lower temperatures resulted in higher etch rates and aspect ratios for SiO2. However, the plasma property was constant with the chuck temperature, indicated by the line intensity ratio from optical emission spectroscopy monitoring of the plasma. The variables obtained from the characterization of the etched profile for the 200 nm trench after etching were analyzed as a function of temperature. A reduction in the necking ratio affected the etch rate and aspect ratio of SiO2. The etching mechanism of the aspect ratio etching of SiO2 was discussed based on the results of the surface composition at necking via energy-dispersive X-ray spectroscopy with temperature. The results suggested that the neutral species reaching the etch front of SiO2 had a low sticking coefficient. The bowing ratio decreased with lowering temperature, indicating the presence of directional ions during etching. Therefore, a lower temperature for the aspect ratio etching of SiO2 could achieve a faster etch rate and a higher aspect ratio of SiO2 via the reduction of necking than higher temperatures.
Texto completo:
1
Coleções:
01-internacional
Base de dados:
MEDLINE
Idioma:
En
Revista:
Nanomaterials (Basel)
Ano de publicação:
2024
Tipo de documento:
Article