Hydro-physical characterization of soils under the Restinga Forest

ABSTRACT: Knowledge of the hydraulic properties of the soil is of crucial importance to an understanding of the interactions between vegetation, soil and water. There is little information available about the hydraulic properties of Podzol soils found in tropical regions. The aim of this study was to present the soil morphology and hydraulic properties of a toposequence situated in a permanent plot at the Ilha do Cardoso State Park (Cananéia, SP, Brazil). Ultradetailed soil maps were used to define a toposequence inside the permanent plot. Five profiles, representing the main types of soil, were opened along the toposequence, in which Podzols are dominant. The levels of bulk density, sand content, porosity and permeability in these soils were all high. Consequently, these soils have a high level of hydraulic conductivity with low water retention. This behavior undergoes an alteration in the Bh and Bs horizons due to the accumulation of organic and metallic compounds and a changing structure that modifies the pore distribution. Furthermore, the characterization of the hydro-physical functioning of soils in natural environments is an important source of encouragement to further investigative study of soil water dynamics and its relationship to the native vegetation.

Hydro-physical characterization of soils under the Restinga Forest

ABSTRACT: Knowledge of the hydraulic properties of the soil is of crucial importance to an understanding of the interactions between vegetation, soil and water. There is little information available about the hydraulic properties of Podzol soils found in tropical regions. The aim of this study was to present the soil morphology and hydraulic properties of a toposequence situated in a permanent plot at the Ilha do Cardoso State Park (Cananéia, SP, Brazil). Ultradetailed soil maps were used to define a toposequence inside the permanent plot. Five profiles, representing the main types of soil, were opened along the toposequence, in which Podzols are dominant. The levels of bulk density, sand content, porosity and permeability in these soils were all high. Consequently, these soils have a high level of hydraulic conductivity with low water retention. This behavior undergoes an alteration in the Bh and Bs horizons due to the accumulation of organic and metallic compounds and a changing structure that modifies the pore distribution. Furthermore, the characterization of the hydro-physical functioning of soils in natural environments is an important source of encouragement to further investigative study of soil water dynamics and its relationship to the native vegetation.(AU)

Software for micromorphometric characterization of soil pores obtained from 2-D image analysis

Studies of soil porosity through image analysis are important to an understanding of how the soil functions. However, the lack of a simplified methodology for the quantification of the shape, number, and size of soil pores has limited the use of information extracted from images. The present work proposes a software program for the quantification and characterization of soil porosity from data derived from 2-D images. The user-friendly software was developed in C++ and allows for the classification of pores in terms of size, shape, and combinations of size and shape. Using raw data generated by image analysis systems, the software calculates the following parameters for the characterization of soil porosity: total area of pore (Tap), number of pores, pore shape, pore shape and pore area, and pore shape and equivalent pore diameter (EqDiam). In this paper, the input file with the raw soil porosity data was generated using the Noesis Visilog 5.4 image analysis system; however other image analysis programs can be used, in which case, the input file requires a standard format to permit processing by this software. The software also shows the descriptive statistics (mean, standard deviation, variance, and the coefficient of variation) of the parameters considering the total number of images evaluated. The results show that the software is a complementary tool to any analysis of soil porosity, allowing for a precise and quick analysis.

Software for micromorphometric characterization of soil pores obtained from 2-D image analysis

Studies of soil porosity through image analysis are important to an understanding of how the soil functions. However, the lack of a simplified methodology for the quantification of the shape, number, and size of soil pores has limited the use of information extracted from images. The present work proposes a software program for the quantification and characterization of soil porosity from data derived from 2-D images. The user-friendly software was developed in C++ and allows for the classification of pores in terms of size, shape, and combinations of size and shape. Using raw data generated by image analysis systems, the software calculates the following parameters for the characterization of soil porosity: total area of pore (Tap), number of pores, pore shape, pore shape and pore area, and pore shape and equivalent pore diameter (EqDiam). In this paper, the input file with the raw soil porosity data was generated using the Noesis Visilog 5.4 image analysis system; however other image analysis programs can be used, in which case, the input file requires a standard format to permit processing by this software. The software also shows the descriptive statistics (mean, standard deviation, variance, and the coefficient of variation) of the parameters considering the total number of images evaluated. The results show that the software is a complementary tool to any analysis of soil porosity, allowing for a precise and quick analysis.(AU)

Controlled traffic and soil physical quality of an Oxisol under sugarcane cultivation

Machinery traffic in sugarcane (Saccharumsp.) plantations reduces soil physical quality, and hinders both root development and crop yield. We evaluated the physical quality of an Oxisol and the development of sugarcane roots under controlled traffic. The treatments assessed were: without controlled machinery traffic (WCT), controlled traffic by adjusting the tractor and infield wagons to a 3.0 m track width with the operator guiding the machinery (CT1) and the previous treatment using real time kinematic / global positioning system (RTK / GPS) precision auto steer (CT2). Soil samples were collected from the planting rows, seedbed and inter-row center to determine the least limiting water range (LLWR) and soil porosity from scanned 2-D images. The root dry mass was sampled from monoliths, separated from the soil by washing through a 2-mm sieve and dried in an oven. A higher LLWR was observed in the planting row under CT1 and CT2 than under WCT. The planting row had a predominance of complex pores with a diameter > 500 µm in the 0.15-0.27 m depth layer under CT1 and CT2. In the planting rows under WCT, the root dry mass was only 44 % of that measured under CT2. Benefits regarding soil physical quality and growth roots were observed when the tractor-wagon track width was adjusted based on the sugarcane spacing using either precision auto steering or manual operation of the machinery.

Controlled traffic and soil physical quality of an Oxisol under sugarcane cultivation

Machinery traffic in sugarcane (Saccharumsp.) plantations reduces soil physical quality, and hinders both root development and crop yield. We evaluated the physical quality of an Oxisol and the development of sugarcane roots under controlled traffic. The treatments assessed were: without controlled machinery traffic (WCT), controlled traffic by adjusting the tractor and infield wagons to a 3.0 m track width with the operator guiding the machinery (CT1) and the previous treatment using real time kinematic / global positioning system (RTK / GPS) precision auto steer (CT2). Soil samples were collected from the planting rows, seedbed and inter-row center to determine the least limiting water range (LLWR) and soil porosity from scanned 2-D images. The root dry mass was sampled from monoliths, separated from the soil by washing through a 2-mm sieve and dried in an oven. A higher LLWR was observed in the planting row under CT1 and CT2 than under WCT. The planting row had a predominance of complex pores with a diameter > 500 µm in the 0.15-0.27 m depth layer under CT1 and CT2. In the planting rows under WCT, the root dry mass was only 44 % of that measured under CT2. Benefits regarding soil physical quality and growth roots were observed when the tractor-wagon track width was adjusted based on the sugarcane spacing using either precision auto steering or manual operation of the machinery.(AU)

Hydro-physical characterization of soils under tropical semi-deciduous forest

The study of the hydro-physical behavior in soils using toposequences is of great importance for better understanding the soil, water and vegetation relationships. This study aims to assess the hydro-physical and morphological characterization of soil from a toposequence in Galia, state of São Paulo, Brazil). The plot covers an area of 10.24 ha (320 × 320 m), located in a semi-deciduous seasonal forest. Based on ultra-detailed soil and topographic maps of the area, a representative transect from the soil in the plot was chosen. Five profiles were opened for the morphological description of the soil horizons, and hydro-physical and micromorphological analyses were performed to characterize the soil. Arenic Haplustult, Arenic Haplustalf and Aquertic Haplustalf were the soil types observed in the plot. The superficial horizons had lower density and greater hydraulic conductivity, porosity and water retention in lower tensions than the deeper horizons. In the sub-superficial horizons, greater water retention at higher tensions and lower hydraulic conductivity were observed, due to structure type and greater clay content. The differences observed in the water retention curves between the sandy E and the clay B horizons were mainly due to the size distribution, shape and type of soil pores.

Hydro-physical characterization of soils under tropical semi-deciduous forest

The study of the hydro-physical behavior in soils using toposequences is of great importance for better understanding the soil, water and vegetation relationships. This study aims to assess the hydro-physical and morphological characterization of soil from a toposequence in Galia, state of São Paulo, Brazil). The plot covers an area of 10.24 ha (320 × 320 m), located in a semi-deciduous seasonal forest. Based on ultra-detailed soil and topographic maps of the area, a representative transect from the soil in the plot was chosen. Five profiles were opened for the morphological description of the soil horizons, and hydro-physical and micromorphological analyses were performed to characterize the soil. Arenic Haplustult, Arenic Haplustalf and Aquertic Haplustalf were the soil types observed in the plot. The superficial horizons had lower density and greater hydraulic conductivity, porosity and water retention in lower tensions than the deeper horizons. In the sub-superficial horizons, greater water retention at higher tensions and lower hydraulic conductivity were observed, due to structure type and greater clay content. The differences observed in the water retention curves between the sandy E and the clay B horizons were mainly due to the size distribution, shape and type of soil pores.

Sediment morphology and distribution in a restored riparian forest

Sediment distribution patterns of riparian zones reflect the deposition dynamics and the type of deposition event. The purpose of this study is to characterize the morphology and distribution of sediments deposited in a restored riparian forest that were transported from adjacent areas cropped with sugar-cane. In order to study the deposition processes in a riparian forest located in the county of Iracemápolis state of São Paulo, Brazil, soil samples were collected on a transect for micromorphological as well as particle size distribution analyses, using Folk & Ward statistical parameters. Soil samples were dispersed with NaOH + sodium hexametaphosphate and water. The dispersion in water was made to simulate field transport conditions. Particle size distributions together with field and laboratory morphological analyses showed an irregular and non-uniform sediment deposition. This deposition process suggests the occurrence of high intensity erosive events that produce high amount of sediments and runoff characterized by a turbulent flow. The land use change in the riparian area marks the change in the preferential deposition location, which when sugar-cane dominated, corresponded to the alluvial plain and, after the restoration and development of the riparian forest, was dislocated 27 m upslope within the first few meters from the border of the forest.

O padrão de distribuição de sedimentos na zona ripária reflete a dinâmica da deposição e os prováveis processos ocorridos. Para inferir sobre os processos de deposição ocorridos, amostras de solo foram coletadas numa transeção para a realização de análises micromorfológicas e, também análises granulométricas apoiadas na interpretação estatística dos parâmetros de Folk & Ward (1957). As amostras de solo foram dispersas em NaOH + Hexametafosfato de Sódio e também em água, para simular as condições de transporte de sedimentos no campo. Os resultados obtidos através da análise granulométrica foram reforçados pelas análises de imagens e porosidade em amostras indeformadas. Os atributos do solo enterrado e dos sedimentos depositados evidenciam um padrão de deposição irregular e desuniforme, que sugere a ocorrência de eventos erosivos de grande intensidade (fluxo turbulento). Essa irregularidade e desuniformidade da deposição estão relacionadas à alteração do uso da terra. A implantação do reflorestamento na zona ripária de Iracema B deslocou a deposição de sedimentos, 27 m à montante na encosta.

Sediment morphology and distribution in a restored riparian forest

Sediment distribution patterns of riparian zones reflect the deposition dynamics and the type of deposition event. The purpose of this study is to characterize the morphology and distribution of sediments deposited in a restored riparian forest that were transported from adjacent areas cropped with sugar-cane. In order to study the deposition processes in a riparian forest located in the county of Iracemápolis state of São Paulo, Brazil, soil samples were collected on a transect for micromorphological as well as particle size distribution analyses, using Folk & Ward statistical parameters. Soil samples were dispersed with NaOH + sodium hexametaphosphate and water. The dispersion in water was made to simulate field transport conditions. Particle size distributions together with field and laboratory morphological analyses showed an irregular and non-uniform sediment deposition. This deposition process suggests the occurrence of high intensity erosive events that produce high amount of sediments and runoff characterized by a turbulent flow. The land use change in the riparian area marks the change in the preferential deposition location, which when sugar-cane dominated, corresponded to the alluvial plain and, after the restoration and development of the riparian forest, was dislocated 27 m upslope within the first few meters from the border of the forest.

O padrão de distribuição de sedimentos na zona ripária reflete a dinâmica da deposição e os prováveis processos ocorridos. Para inferir sobre os processos de deposição ocorridos, amostras de solo foram coletadas numa transeção para a realização de análises micromorfológicas e, também análises granulométricas apoiadas na interpretação estatística dos parâmetros de Folk & Ward (1957). As amostras de solo foram dispersas em NaOH + Hexametafosfato de Sódio e também em água, para simular as condições de transporte de sedimentos no campo. Os resultados obtidos através da análise granulométrica foram reforçados pelas análises de imagens e porosidade em amostras indeformadas. Os atributos do solo enterrado e dos sedimentos depositados evidenciam um padrão de deposição irregular e desuniforme, que sugere a ocorrência de eventos erosivos de grande intensidade (fluxo turbulento). Essa irregularidade e desuniformidade da deposição estão relacionadas à alteração do uso da terra. A implantação do reflorestamento na zona ripária de Iracema B deslocou a deposição de sedimentos, 27 m à montante na encosta.

Savanna woodland soil micromorphology related to water retention

The limiting factors of the Brazilian savanna physical environment have been largely discussed. Soil morphology is fundamental to understand the behavior of soil water flow, soil physical properties and soil-landscape relationships. The aim of this study is to relate soil micro and macromorphologic attributes to soil water retention on a toposequence under native savanna woodland (cerradão) in a permanent plot of 320 m FONT FACE=Symbol>´ /FONT> 320 m installed in Assis, SP, Brazil. Samples collected at five points within the toposequence were used to determine the soil macroporosity by means of image analyses, estimated total porosity, chemical analysis, particle size distribution analysis and soil water retention. From the summit down to the footslope, the soils were classified as Rhodic Haplustox, Typic Haplustox and Epiaquic Haplustult, presenting a gradual color transition and a sandy loam texture. In the surface horizons, the higher organic matter content and the high total macroporosity determined a lower soil bulk density and lower water retention. In the Oxisols, the high soil macroporosity results from the packing of microaggregates in the oxic horizon. In the Ultisol, the lower total porosity in the deeper horizons resulted in a higher water retention and an imperfect water drainage. The water retention conditions on the slope influenced the morphological differences in soil color and structure. The low water retention on the surface and oxic horizons, conditioned by the high total macroporosity, is one of the factors that may define the vegetal pattern of the savanna woodland within the permanent plot.

Os fatores limitantes do ambiente físico do Cerrado têm sido muito discutidos. Porém, o detalhamento da morfologia do solo torna-se fundamental à compreensão do seu funcionamento físico-hídrico e sua relação com a paisagem. O objetivo deste estudo foi relacionar os atributos macro e micromorfológicos à retenção de água no solo em uma toposseqüência sob cerradão em uma parcela permanente de 320 FONT FACE=Symbol>´ /FONT> 320 m, instalada em Assis, SP. Amostras coletadas em cinco pontos distribuídos na toposseqüência foram utilizadas para determinar a macroporosidade do solo por análise de imagens, porosidade total estimada, análise química, granulometria e retenção de água no solo. De montante a jusante, os solos foram classificados como Latossolo Vermelho, Latossolo Vermelho-Amarelo, Latossolo Amarelo e Gleissolo Háplico, apresentando uma transição gradual de cor e textura franco-arenosa. No horizonte de superfície, o maior teor de matéria orgânica e a elevada macroporosidade total determinaram menor densidade do solo e baixa retenção de água. Nos Latossolos, a microestrutura do solo consistiu principalmente em aglomerados de microagregados, ocasionando uma elevada macroporosidade no horizonte diagnóstico. No Gleissolo, a menor porosidade total nos horizontes mais profundos resultou em uma maior retenção de água e drenagem imperfeita. As diferenças morfológicas de cor e estrutura do solo foram influenciadas pelas condições de retenção de água na vertente. A baixa retenção de água nos horizontes de solo superficiais e latossólicos, condicionada pela elevada macroporosidade total, é um dos fatores que pode definir o padrão vegetacional de cerradão na parcela permanente.

Savanna woodland soil micromorphology related to water retention

The limiting factors of the Brazilian savanna physical environment have been largely discussed. Soil morphology is fundamental to understand the behavior of soil water flow, soil physical properties and soil-landscape relationships. The aim of this study is to relate soil micro and macromorphologic attributes to soil water retention on a toposequence under native savanna woodland (cerradão) in a permanent plot of 320 m FONT FACE=Symbol>´ /FONT> 320 m installed in Assis, SP, Brazil. Samples collected at five points within the toposequence were used to determine the soil macroporosity by means of image analyses, estimated total porosity, chemical analysis, particle size distribution analysis and soil water retention. From the summit down to the footslope, the soils were classified as Rhodic Haplustox, Typic Haplustox and Epiaquic Haplustult, presenting a gradual color transition and a sandy loam texture. In the surface horizons, the higher organic matter content and the high total macroporosity determined a lower soil bulk density and lower water retention. In the Oxisols, the high soil macroporosity results from the packing of microaggregates in the oxic horizon. In the Ultisol, the lower total porosity in the deeper horizons resulted in a higher water retention and an imperfect water drainage. The water retention conditions on the slope influenced the morphological differences in soil color and structure. The low water retention on the surface and oxic horizons, conditioned by the high total macroporosity, is one of the factors that may define the vegetal pattern of the savanna woodland within the permanent plot.

Os fatores limitantes do ambiente físico do Cerrado têm sido muito discutidos. Porém, o detalhamento da morfologia do solo torna-se fundamental à compreensão do seu funcionamento físico-hídrico e sua relação com a paisagem. O objetivo deste estudo foi relacionar os atributos macro e micromorfológicos à retenção de água no solo em uma toposseqüência sob cerradão em uma parcela permanente de 320 FONT FACE=Symbol>´ /FONT> 320 m, instalada em Assis, SP. Amostras coletadas em cinco pontos distribuídos na toposseqüência foram utilizadas para determinar a macroporosidade do solo por análise de imagens, porosidade total estimada, análise química, granulometria e retenção de água no solo. De montante a jusante, os solos foram classificados como Latossolo Vermelho, Latossolo Vermelho-Amarelo, Latossolo Amarelo e Gleissolo Háplico, apresentando uma transição gradual de cor e textura franco-arenosa. No horizonte de superfície, o maior teor de matéria orgânica e a elevada macroporosidade total determinaram menor densidade do solo e baixa retenção de água. Nos Latossolos, a microestrutura do solo consistiu principalmente em aglomerados de microagregados, ocasionando uma elevada macroporosidade no horizonte diagnóstico. No Gleissolo, a menor porosidade total nos horizontes mais profundos resultou em uma maior retenção de água e drenagem imperfeita. As diferenças morfológicas de cor e estrutura do solo foram influenciadas pelas condições de retenção de água na vertente. A baixa retenção de água nos horizontes de solo superficiais e latossólicos, condicionada pela elevada macroporosidade total, é um dos fatores que pode definir o padrão vegetacional de cerradão na parcela permanente.

Environmental impact of the Brazilian Agrarian Reform process from 1985 to 2001

During the past 20 years, most settlements of the Brazilian Agrarian Reform (AR) have been established in or near better-preserved natural ecosystems, where environmental impact is likely to be negative and contribute to natural resources degradation. The objective of this work is providing a first, comprehensive insight of the impacts related to the environmental quality of these settlements, based on the primary survey of 4,340 AR settlements installed between 1985 and 2001. An index was calculated to integrate different aspects of environmental impacts in one single number. The index showed significant regional variation, with lower values (low environmental quality) for the North and Northeast of Brazil, intermediate values for the Central-west and Southeast, and high values for the South. Environmental impacts resulting from AR and settlement creation are slowly decreasing with time, but are still very high in absolute values. The lack of protection of riparian areas, cultivation of legal reserves, and deforestation, are the main concerns related to environmental impacts.

Até o presente a maioria dos assentamentos da Reforma Agrária brasileira (AR) têm sido estabelecidos em ou perto de ambientes preservados, nos quais impactos ambientais negativos são esperados e podem levar à degradação dos recursos naturais. O objetivo deste trabalho foi apresentar uma visão ampla dos impactos relacionados à qualidade ambiental dos assentamentos com base em dados primários coletados em 4.340 projetos criados entre 1985 e 2001. Um índice foi criado com a finalidade de integrar diferentes aspectos ambientais. Este índice apresentou expressiva variação regional, com valores menores (baixa qualidade ambiental) nas regiões Norte e Nordeste do Brasil, intermediários na região Centro-Oeste e Sudeste, e elevados na região Sul. Os impactos ambientais resultantes da criação de assentamentos diminuíram com o tempo, mas ainda são elevados em termos absolutos. A falta de proteção de Áreas de Preservação Permanente, o cultivo de Reservas Legais e o desmatamento são os principais fatores relacionados aos impactos ambientais.

Environmental impact of the Brazilian Agrarian Reform process from 1985 to 2001

During the past 20 years, most settlements of the Brazilian Agrarian Reform (AR) have been established in or near better-preserved natural ecosystems, where environmental impact is likely to be negative and contribute to natural resources degradation. The objective of this work is providing a first, comprehensive insight of the impacts related to the environmental quality of these settlements, based on the primary survey of 4,340 AR settlements installed between 1985 and 2001. An index was calculated to integrate different aspects of environmental impacts in one single number. The index showed significant regional variation, with lower values (low environmental quality) for the North and Northeast of Brazil, intermediate values for the Central-west and Southeast, and high values for the South. Environmental impacts resulting from AR and settlement creation are slowly decreasing with time, but are still very high in absolute values. The lack of protection of riparian areas, cultivation of legal reserves, and deforestation, are the main concerns related to environmental impacts.

Até o presente a maioria dos assentamentos da Reforma Agrária brasileira (AR) têm sido estabelecidos em ou perto de ambientes preservados, nos quais impactos ambientais negativos são esperados e podem levar à degradação dos recursos naturais. O objetivo deste trabalho foi apresentar uma visão ampla dos impactos relacionados à qualidade ambiental dos assentamentos com base em dados primários coletados em 4.340 projetos criados entre 1985 e 2001. Um índice foi criado com a finalidade de integrar diferentes aspectos ambientais. Este índice apresentou expressiva variação regional, com valores menores (baixa qualidade ambiental) nas regiões Norte e Nordeste do Brasil, intermediários na região Centro-Oeste e Sudeste, e elevados na região Sul. Os impactos ambientais resultantes da criação de assentamentos diminuíram com o tempo, mas ainda são elevados em termos absolutos. A falta de proteção de Áreas de Preservação Permanente, o cultivo de Reservas Legais e o desmatamento são os principais fatores relacionados aos impactos ambientais.

Origin of microaggregates in soils with ferralic horizons

Microaggregates that characterize ferralic soils have been hypothesized to have physical, geochemical and/or biological origins. Despite of many studies, the hierarchy between these processes that form microaggregates has seldom been reported. The objective of this work was to study the genesis of microaggregates in a sequence of Ferralic Nitisols developed on Quaternary red clayey sediments and diabase in Piracicaba (SP), Brazil. This issue was tackled by combining optical microscopy, image analysis, scanning electron microscopy and elemental iron quantifications by X-ray fluorescence. Micromorphological investigations showed three different types of microaggregates: (i) oval microaggregates with well sorted quartz grains in their interior; (ii) oval microaggregates without or with poorly sorted quartz grains in their interior; and (iii) dense polyedric microaggregates. These morphological evidences, together with the elemental iron determinations and scanning electron microscopy, revealed the contribution of more than one process for microaggregate formation: (i) the mechanical action of the mesofauna would form the first type of microaggregates (ii) geochemical and biological processes would form the second type and (iii) the fissuration of the soil matrix by expansion and compression processes would form the third type.

Os microagregados, característicos do horizonte B latossólico, podem ser formados a partir de processos físicos, geoquímicos e biológicos. Apesar da quantidade de trabalhos realizados sobre este tema, poucos tem discutido a hierarquia entre os processos que formam estes microagregados. O objetivo deste trabalho foi estudar a gênese dos microagregados numa seqüência de solos localizada em Piracicaba (SP), Brasil. Os solos foram classificados como Nitossolos Vermelhos Eutroférricos latossólicos e desenvolvem-se a partir de sedimentos argilosos vermelhos do Quaternário e diabásio. Para atingir o objetivo deste trabalho foram utilizadas técnicas de microscopia ótica, análise de imagens, microscopia eletrônica de varredura e quantificações elementares de ferro através de fluorescência de raio-X. As investigações micromorfológicas mostraram a presença de três tipos de microagregados: (i) microagregados ovais com grãos de quartzo bem selecionados no seu interior; (ii) microagregados ovais sem grãos de quartzo ou grãos de quartzo mal selecionados no seu interior; e (iii) microagregados poliédricos densos. Estas evidencias morfológicas junto com os dados elementares de ferro e a microscopia eletrônica de varredura mostraram a contribuição de mais de um processo na formação dos microagregados: (i) a ação mecânica da mesofauna seria responsável pela formação do primeiro tipo de microagregados; (ii) processos geoquímicos e biológicos estariam formando o segundo tipo de microagregados; e (iii) a fissuração da matriz do solo por processos de contração e expansão formariam o terceiro tipo de microagregados.

Origin of microaggregates in soils with ferralic horizons

Microaggregates that characterize ferralic soils have been hypothesized to have physical, geochemical and/or biological origins. Despite of many studies, the hierarchy between these processes that form microaggregates has seldom been reported. The objective of this work was to study the genesis of microaggregates in a sequence of Ferralic Nitisols developed on Quaternary red clayey sediments and diabase in Piracicaba (SP), Brazil. This issue was tackled by combining optical microscopy, image analysis, scanning electron microscopy and elemental iron quantifications by X-ray fluorescence. Micromorphological investigations showed three different types of microaggregates: (i) oval microaggregates with well sorted quartz grains in their interior; (ii) oval microaggregates without or with poorly sorted quartz grains in their interior; and (iii) dense polyedric microaggregates. These morphological evidences, together with the elemental iron determinations and scanning electron microscopy, revealed the contribution of more than one process for microaggregate formation: (i) the mechanical action of the mesofauna would form the first type of microaggregates (ii) geochemical and biological processes would form the second type and (iii) the fissuration of the soil matrix by expansion and compression processes would form the third type.

Os microagregados, característicos do horizonte B latossólico, podem ser formados a partir de processos físicos, geoquímicos e biológicos. Apesar da quantidade de trabalhos realizados sobre este tema, poucos tem discutido a hierarquia entre os processos que formam estes microagregados. O objetivo deste trabalho foi estudar a gênese dos microagregados numa seqüência de solos localizada em Piracicaba (SP), Brasil. Os solos foram classificados como Nitossolos Vermelhos Eutroférricos latossólicos e desenvolvem-se a partir de sedimentos argilosos vermelhos do Quaternário e diabásio. Para atingir o objetivo deste trabalho foram utilizadas técnicas de microscopia ótica, análise de imagens, microscopia eletrônica de varredura e quantificações elementares de ferro através de fluorescência de raio-X. As investigações micromorfológicas mostraram a presença de três tipos de microagregados: (i) microagregados ovais com grãos de quartzo bem selecionados no seu interior; (ii) microagregados ovais sem grãos de quartzo ou grãos de quartzo mal selecionados no seu interior; e (iii) microagregados poliédricos densos. Estas evidencias morfológicas junto com os dados elementares de ferro e a microscopia eletrônica de varredura mostraram a contribuição de mais de um processo na formação dos microagregados: (i) a ação mecânica da mesofauna seria responsável pela formação do primeiro tipo de microagregados; (ii) processos geoquímicos e biológicos estariam formando o segundo tipo de microagregados; e (iii) a fissuração da matriz do solo por processos de contração e expansão formariam o terceiro tipo de microagregados.

Learning soil classification with the Kayapó indians

The Kayapó Xicrin do Cateté (Xicrin) indigenous reserve is located within the Amazon forest in Pará (Brazil). The Xicrins have developed a soil classification system that is incorporated in their language and culture. The etymology of their classification system and its logical structure makes it similar and comparable with modern soil classification. The etymology of the Xicrin's language is based on the junction of radicals to form words for different soil names. The name of the soil is formed by the main noun radical "puka", to which adjectives referring to soil morphological attributes are added. Modern classification systems are also based on similar morphological variables, and analytical support for defining boundaries of chemical or physical soil attributes are important only in lower hierarchical levels. Soil scientists have developed a soil classification system that is sensitive for the restrictions and potentialities the soil will show for modern agriculture. The Xicrins classify soils for what is important for their life style, i.e. a harmonic and friendly life with the resources they gain from the forest.

A reserva indígena Kayapó-Xicrin do Cateté esta localizada na floresta amazônica no estado do Pará (Brasil). Os Xicrins desenvolveram uma classificação de solo que esta incorporada ao seu idioma e cultura. A etimologia da classificação dos solos e a sua estrutura lógica são similares com os sistemas modernos de classificação de solos. A etimologia do idioma Xicrin é baseada na união de radicais para formar as palavras e a mesma é utilizada para formar os diferentes nomes dos solos. O nome do solo é formado pelo radical principal "puka" ao qual são adicionados adjetivos referentes aos atributos morfológicos dos solos. Os sistemas de classificação de solos modernos também são baseados nos mesmos atributos morfológicos, apesar de que apoio analítico é importante para definir os limites entre os atributos químicos e físicos dos solos em níveis hierárquicos mais baixos. Os cientistas de solos têm desenvolvido uma classificação de solos interpretativa para as restrições e potencialidades que o solo tem para a agricultura moderna. Os Xicrins classificam o solo para aquilo que é importante para a vida deles, uma vida harmônica e simbiótica com a natureza.

Learning soil classification with the Kayapó indians

The Kayapó Xicrin do Cateté (Xicrin) indigenous reserve is located within the Amazon forest in Pará (Brazil). The Xicrins have developed a soil classification system that is incorporated in their language and culture. The etymology of their classification system and its logical structure makes it similar and comparable with modern soil classification. The etymology of the Xicrin's language is based on the junction of radicals to form words for different soil names. The name of the soil is formed by the main noun radical "puka", to which adjectives referring to soil morphological attributes are added. Modern classification systems are also based on similar morphological variables, and analytical support for defining boundaries of chemical or physical soil attributes are important only in lower hierarchical levels. Soil scientists have developed a soil classification system that is sensitive for the restrictions and potentialities the soil will show for modern agriculture. The Xicrins classify soils for what is important for their life style, i.e. a harmonic and friendly life with the resources they gain from the forest.

A reserva indígena Kayapó-Xicrin do Cateté esta localizada na floresta amazônica no estado do Pará (Brasil). Os Xicrins desenvolveram uma classificação de solo que esta incorporada ao seu idioma e cultura. A etimologia da classificação dos solos e a sua estrutura lógica são similares com os sistemas modernos de classificação de solos. A etimologia do idioma Xicrin é baseada na união de radicais para formar as palavras e a mesma é utilizada para formar os diferentes nomes dos solos. O nome do solo é formado pelo radical principal "puka" ao qual são adicionados adjetivos referentes aos atributos morfológicos dos solos. Os sistemas de classificação de solos modernos também são baseados nos mesmos atributos morfológicos, apesar de que apoio analítico é importante para definir os limites entre os atributos químicos e físicos dos solos em níveis hierárquicos mais baixos. Os cientistas de solos têm desenvolvido uma classificação de solos interpretativa para as restrições e potencialidades que o solo tem para a agricultura moderna. Os Xicrins classificam o solo para aquilo que é importante para a vida deles, uma vida harmônica e simbiótica com a natureza.

Gênese de ferri-argilãs em horizontes B texturais de uma seqüência de solos sobre diabásio em Piracicaba (SP)

The formation of ferriargillans and densing processes were studied on a soil sequence over diabase situated in Piracicaba (SP) Brazil. Morphological, micromorphological, scanning electron microscopic and microanalytical studies were performed on samples taken from three trenches within the sequence. The presence of illuvial ferriargillans was observed mainly in the argillic B horizons and the saprolite, which filled the mamelonar, polyconcave and planar voids which led to their densing. Evidence of temporary hydromorphy suggested that this process would affect the stability of the iron oxide-clay interactions which would promote the mobilization and redistribution of iron and clay.

Numa sequência de solos sobre diabásio localizada no campus da USP em Piracicaba a formação de ferri-argilãs e os processos de adensamento foram estudados. Foram realizados estudos morfológicos, micromorfológicos, de microscopia eletrônica de varredura e microanálise em amostras retiradas de três trincheiras localizadas nesta sequência. A presença de ferri-argilãs de iluviação foi observada nos horizontes B textural e na alterita principalmente preenchendo a porosidade mamelonar, policôncava e fissural provocando o adensamento dos mesmos. Evidências de hidromorfia temporária sugeriram que este processo estaria provocando a desestabilização das ligações ferro-argila facilitando assim a mobilização e redistribuição do ferro e da argila.

Gênese de ferri-argilãs em horizontes B texturais de uma seqüência de solos sobre diabásio em Piracicaba (SP)

The formation of ferriargillans and densing processes were studied on a soil sequence over diabase situated in Piracicaba (SP) Brazil. Morphological, micromorphological, scanning electron microscopic and microanalytical studies were performed on samples taken from three trenches within the sequence. The presence of illuvial ferriargillans was observed mainly in the argillic B horizons and the saprolite, which filled the mamelonar, polyconcave and planar voids which led to their densing. Evidence of temporary hydromorphy suggested that this process would affect the stability of the iron oxide-clay interactions which would promote the mobilization and redistribution of iron and clay.

Numa sequência de solos sobre diabásio localizada no campus da USP em Piracicaba a formação de ferri-argilãs e os processos de adensamento foram estudados. Foram realizados estudos morfológicos, micromorfológicos, de microscopia eletrônica de varredura e microanálise em amostras retiradas de três trincheiras localizadas nesta sequência. A presença de ferri-argilãs de iluviação foi observada nos horizontes B textural e na alterita principalmente preenchendo a porosidade mamelonar, policôncava e fissural provocando o adensamento dos mesmos. Evidências de hidromorfia temporária sugeriram que este processo estaria provocando a desestabilização das ligações ferro-argila facilitando assim a mobilização e redistribuição do ferro e da argila.