Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 8 de 8
Filtrar
Mais filtros

Base de dados
Ano de publicação
Tipo de documento
Intervalo de ano de publicação
1.
Artigo em Inglês | LILACS-Express | VETINDEX | ID: biblio-1457728

Resumo

Background: The common marmoset (Callithrix jacchus) belongs to the family Cebidae and Subfamily Callitrichinae, a group formed by the smallest anthropoid primates. It is a very common species and adapts easily to captivity, an aspect that encourages the clandestine capture of these animals and makes them susceptible to wounds resulting from clandestine rearing and inadequate management, so that studies to understand the species are extremely important.  With the objective of supplying anatomic bases for the practice of epidural anesthetic, data were studied regarding the topography of the common marmoset (Callithrix jacchus).Materials, Methods & Results: The study was carried out at the Laboratory of Veterinary Anatomy at the Federal University of Campina Grande (UFCG), PA, Brazil. Ten adult common marmosets (Callithrix jacchus) were used, 5 males and 5 females, with different causes of death. A round workbench magnifying lamp was used to better visualize the dissecation field.  Number 15 scalpel blades, surgical pincers and scissors were used to dissect.  After fixing in 10% formaldehyde aqueous solution, dissecation was made along the mid dorsal line, from the cranial thoracic region to the tail base to expose the vertebral arches and measure the intervertebral spaces.  The vertebral arches were removed, and consequently the spinal dura mater was exposed, that was sectio

2.
Acta sci. vet. (Impr.) ; 41: 01-04, 2013.
Artigo em Inglês | LILACS-Express | VETINDEX | ID: biblio-1457150

Resumo

Background: Cervical fractures in dogs occur most commonly in the cranial region, mostly requiring surgery. Various types of implants are being used while fi xation using plate is poorly described in the literature. The plate and screw types are a limiting factor since they can lead to loss of stability due to loosening of the screws. The use of locking plates has been advocated, which does not allow movement between the screw-plate-bone, providing extreme stability and rigidity to the system. This study describes the use of locking bone plate to stabilize axis fracture in a dog and the results obtained with this technique.Case: A 9-month-old male Poodle presented due to a history of trauma to the cervical spine caused by a fall of an object. Upon physical examination, the patient was alert and physiological parameters within the normal reference limits. However, neurological examination showed tetraplegia, hyperrefl exia, preserved nociception and much cervical pain. There were no changes in the cranial nerves test. Cranial cervical lesion was initially suspected and the patient was rigidly fi xed on a flat surface. The radiographic examination showed a fracture of the second cervical vertebra (axis) with anatomical axis deviation, and the patient was referred for surgery. After anesthesia, the dog was positioned dorsal decubitus and rigidly fixed on the operating table with t


Background: Cervical fractures in dogs occur most commonly in the cranial region, mostly requiring surgery. Various types of implants are being used while fi xation using plate is poorly described in the literature. The plate and screw types are a limiting factor since they can lead to loss of stability due to loosening of the screws. The use of locking plates has been advocated, which does not allow movement between the screw-plate-bone, providing extreme stability and rigidity to the system. This study describes the use of locking bone plate to stabilize axis fracture in a dog and the results obtained with this technique.Case: A 9-month-old male Poodle presented due to a history of trauma to the cervical spine caused by a fall of an object. Upon physical examination, the patient was alert and physiological parameters within the normal reference limits. However, neurological examination showed tetraplegia, hyperrefl exia, preserved nociception and much cervical pain. There were no changes in the cranial nerves test. Cranial cervical lesion was initially suspected and the patient was rigidly fi xed on a flat surface. The radiographic examination showed a fracture of the second cervical vertebra (axis) with anatomical axis deviation, and the patient was referred for surgery. After anesthesia, the dog was positioned dorsal decubitus and rigidly fixed on the operating table with t

3.
Acta sci. vet. (Online) ; 41: 01-04, 2013.
Artigo em Inglês | VETINDEX | ID: vti-480257

Resumo

Background: Cervical fractures in dogs occur most commonly in the cranial region, mostly requiring surgery. Various types of implants are being used while fi xation using plate is poorly described in the literature. The plate and screw types are a limiting factor since they can lead to loss of stability due to loosening of the screws. The use of locking plates has been advocated, which does not allow movement between the screw-plate-bone, providing extreme stability and rigidity to the system. This study describes the use of locking bone plate to stabilize axis fracture in a dog and the results obtained with this technique.Case: A 9-month-old male Poodle presented due to a history of trauma to the cervical spine caused by a fall of an object. Upon physical examination, the patient was alert and physiological parameters within the normal reference limits. However, neurological examination showed tetraplegia, hyperrefl exia, preserved nociception and much cervical pain. There were no changes in the cranial nerves test. Cranial cervical lesion was initially suspected and the patient was rigidly fi xed on a flat surface. The radiographic examination showed a fracture of the second cervical vertebra (axis) with anatomical axis deviation, and the patient was referred for surgery. After anesthesia, the dog was positioned dorsal decubitus and rigidly fixed on the operating table with t


Background: Cervical fractures in dogs occur most commonly in the cranial region, mostly requiring surgery. Various types of implants are being used while fi xation using plate is poorly described in the literature. The plate and screw types are a limiting factor since they can lead to loss of stability due to loosening of the screws. The use of locking plates has been advocated, which does not allow movement between the screw-plate-bone, providing extreme stability and rigidity to the system. This study describes the use of locking bone plate to stabilize axis fracture in a dog and the results obtained with this technique.Case: A 9-month-old male Poodle presented due to a history of trauma to the cervical spine caused by a fall of an object. Upon physical examination, the patient was alert and physiological parameters within the normal reference limits. However, neurological examination showed tetraplegia, hyperrefl exia, preserved nociception and much cervical pain. There were no changes in the cranial nerves test. Cranial cervical lesion was initially suspected and the patient was rigidly fi xed on a flat surface. The radiographic examination showed a fracture of the second cervical vertebra (axis) with anatomical axis deviation, and the patient was referred for surgery. After anesthesia, the dog was positioned dorsal decubitus and rigidly fixed on the operating table with t

4.
Artigo em Inglês | VETINDEX | ID: vti-733346

Resumo

Background: The common marmoset (Callithrix jacchus) belongs to the family Cebidae and Subfamily Callitrichinae, a group formed by the smallest anthropoid primates. It is a very common species and adapts easily to captivity, an aspect that encourages the clandestine capture of these animals and makes them susceptible to wounds resulting from clandestine rearing and inadequate management, so that studies to understand the species are extremely important.  With the objective of supplying anatomic bases for the practice of epidural anesthetic, data were studied regarding the topography of the common marmoset (Callithrix jacchus).Materials, Methods & Results: The study was carried out at the Laboratory of Veterinary Anatomy at the Federal University of Campina Grande (UFCG), PA, Brazil. Ten adult common marmosets (Callithrix jacchus) were used, 5 males and 5 females, with different causes of death. A round workbench magnifying lamp was used to better visualize the dissecation field.  Number 15 scalpel blades, surgical pincers and scissors were used to dissect.  After fixing in 10% formaldehyde aqueous solution, dissecation was made along the mid dorsal line, from the cranial thoracic region to the tail base to expose the vertebral arches and measure the intervertebral spaces.  The vertebral arches were removed, and consequently the spinal dura mater was exposed, that was sectio

5.
Artigo em Inglês | VETINDEX | ID: vti-731791

Resumo

Background: The common marmoset (Callithrix jacchus) belongs to the family Cebidae and Subfamily Callitrichinae, a group formed by the smallest anthropoid primates. It is a very common species and adapts easily to captivity, an aspect that encourages the clandestine capture of these animals and makes them susceptible to wounds resulting from clandestine rearing and inadequate management, so that studies to understand the species are extremely important.  With the objective of supplying anatomic bases for the practice of epidural anesthetic, data were studied regarding the topography of the common marmoset (Callithrix jacchus).Materials, Methods & Results: The study was carried out at the Laboratory of Veterinary Anatomy at the Federal University of Campina Grande (UFCG), PA, Brazil. Ten adult common marmosets (Callithrix jacchus) were used, 5 males and 5 females, with different causes of death. A round workbench magnifying lamp was used to better visualize the dissecation field.  Number 15 scalpel blades, surgical pincers and scissors were used to dissect.  After fixing in 10% formaldehyde aqueous solution, dissecation was made along the mid dorsal line, from the cranial thoracic region to the tail base to expose the vertebral arches and measure the intervertebral spaces.  The vertebral arches were removed, and consequently the spinal dura mater was exposed, that was sectio

6.
Artigo em Inglês | VETINDEX | ID: vti-731257

Resumo

Background: The common marmoset (Callithrix jacchus) belongs to the family Cebidae and Subfamily Callitrichinae, a group formed by the smallest anthropoid primates. It is a very common species and adapts easily to captivity, an aspect that encourages the clandestine capture of these animals and makes them susceptible to wounds resulting from clandestine rearing and inadequate management, so that studies to understand the species are extremely important.  With the objective of supplying anatomic bases for the practice of epidural anesthetic, data were studied regarding the topography of the common marmoset (Callithrix jacchus).Materials, Methods & Results: The study was carried out at the Laboratory of Veterinary Anatomy at the Federal University of Campina Grande (UFCG), PA, Brazil. Ten adult common marmosets (Callithrix jacchus) were used, 5 males and 5 females, with different causes of death. A round workbench magnifying lamp was used to better visualize the dissecation field.  Number 15 scalpel blades, surgical pincers and scissors were used to dissect.  After fixing in 10% formaldehyde aqueous solution, dissecation was made along the mid dorsal line, from the cranial thoracic region to the tail base to expose the vertebral arches and measure the intervertebral spaces.  The vertebral arches were removed, and consequently the spinal dura mater was exposed, that was sectio

7.
Artigo em Inglês | VETINDEX | ID: vti-730728

Resumo

Background: The common marmoset (Callithrix jacchus) belongs to the family Cebidae and Subfamily Callitrichinae, a group formed by the smallest anthropoid primates. It is a very common species and adapts easily to captivity, an aspect that encourages the clandestine capture of these animals and makes them susceptible to wounds resulting from clandestine rearing and inadequate management, so that studies to understand the species are extremely important.  With the objective of supplying anatomic bases for the practice of epidural anesthetic, data were studied regarding the topography of the common marmoset (Callithrix jacchus).Materials, Methods & Results: The study was carried out at the Laboratory of Veterinary Anatomy at the Federal University of Campina Grande (UFCG), PA, Brazil. Ten adult common marmosets (Callithrix jacchus) were used, 5 males and 5 females, with different causes of death. A round workbench magnifying lamp was used to better visualize the dissecation field.  Number 15 scalpel blades, surgical pincers and scissors were used to dissect.  After fixing in 10% formaldehyde aqueous solution, dissecation was made along the mid dorsal line, from the cranial thoracic region to the tail base to expose the vertebral arches and measure the intervertebral spaces.  The vertebral arches were removed, and consequently the spinal dura mater was exposed, that was sectio

8.
Artigo em Inglês | VETINDEX | ID: vti-730467

Resumo

Background: The common marmoset (Callithrix jacchus) belongs to the family Cebidae and Subfamily Callitrichinae, a group formed by the smallest anthropoid primates. It is a very common species and adapts easily to captivity, an aspect that encourages the clandestine capture of these animals and makes them susceptible to wounds resulting from clandestine rearing and inadequate management, so that studies to understand the species are extremely important.  With the objective of supplying anatomic bases for the practice of epidural anesthetic, data were studied regarding the topography of the common marmoset (Callithrix jacchus).Materials, Methods & Results: The study was carried out at the Laboratory of Veterinary Anatomy at the Federal University of Campina Grande (UFCG), PA, Brazil. Ten adult common marmosets (Callithrix jacchus) were used, 5 males and 5 females, with different causes of death. A round workbench magnifying lamp was used to better visualize the dissecation field.  Number 15 scalpel blades, surgical pincers and scissors were used to dissect.  After fixing in 10% formaldehyde aqueous solution, dissecation was made along the mid dorsal line, from the cranial thoracic region to the tail base to expose the vertebral arches and measure the intervertebral spaces.  The vertebral arches were removed, and consequently the spinal dura mater was exposed, that was sectio

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA