Thermal modification influences the mechanical resistance of wood from forestry species / A modificação térmica influencia na resistência mecânica da madeira de espécies florestais

ABSTRACT: This study evaluated the effects of thermal modification at different temperatures and for different durations on the mechanical strength of wood of selected species from an agroforestry system. To this end, three 9-year-old (approximate age) individuals, each from four species of forest trees-Parapiptadenia rigida (Benth.) Brenan, Peltophorum dubium (Spreng.) Taub., Eucalyptus grandis × Eucalyptus urophylla hybrid, and Schizolobium parahyba (Vell.) Blake-were evaluated. After obtaining initial measurements, samples from the four species under went heat treatment for 2 h and 4 h and were subsequently subjected to heat using an oven at temperatures 120°C, 150°C, 180°C, and 210°C; respectively, in addition to the control. For evaluating mechanical strength, the technical standard ASTM D 143-94 was used to obtain the values of the moduli of elasticity and rupture, tension at the proportional limit, and maximum force of the subjects. It was observed that different durations and temperatures altered the mechanical strength of the wood of the four species studied. The 2 h residence time is the most recommended for conducting thermal modification. This procedure modifies the mechanical resistance of wood in a positive manner, with exposure temperatures ranging between 120 ºC and 180 ºC being the most recommended. The thermal treatment carried out for 4 h is not recommended for structural purposes because of the decrease in flexural strength.

RESUMO: O objetivo do presente estudo foi avaliar o efeito da modificação térmica em diferentes tempos e temperaturas na resistência mecânica da madeira de espécies provenientes de um sistema agroflorestal. Para tanto, foram avaliados três indivíduos de Parapiptadenia rigida (Benth.) Brenan, Peltophorum dubium (Spreng.) Taub., Eucalyptus grandis × Eucalyptus urophylla e Schizolobium parahyba (Vell.) Blake, todos com nove anos de idade. Após o dimensionamento, as amostras passaram pelo processo de modificação térmica durante 2h e 4h realizado em estufa nas temperaturas de 120 °C, 150 °C, 180 °C e 210 °C, além da testemunha. Para avaliação da resistência mecânica, seguiu-se a norma técnica ASTM D 143-94, obtendo-se os valores de módulos de elasticidade e ruptura, tensão no limite proporcional e força máxima. Observou-se que os diferentes tempos e temperaturas alteram a resistência mecânica das quatro espécies estudadas. O tempo de 2 h de permanência é o mais recomendado para a realização da modificação térmica. O procedimento modifica a resistência mecânica da madeira de uma forma positiva, sendo que as temperaturas de exposição que variaram entre 120 °C e 180 ºC são as mais recomendadas. A modificação térmica realizada pelo período de 4 h não é recomendada para fins estruturais, pelo fato do decréscimo da resistência à flexão.

Thermal modification influences the mechanical resistance of wood from forestry species / A modificação térmica influencia na resistência mecânica da madeira de espécies florestais

This study evaluated the effects of thermal modification at different temperatures and for different durations on the mechanical strength of wood of selected species from an agroforestry system. To this end, three 9-year-old (approximate age) individuals, each from four species of forest trees-Parapiptadenia rigida (Benth.) Brenan, Peltophorum dubium (Spreng.) Taub., Eucalyptus grandis × Eucalyptus urophylla hybrid, and Schizolobium parahyba (Vell.) Blake-were evaluated. After obtaining initial measurements, samples from the four species under went heat treatment for 2 h and 4 h and were subsequently subjected to heat using an oven at temperatures 120°C, 150°C, 180°C, and 210°C; respectively, in addition to the control. For evaluating mechanical strength, the technical standard ASTM D 143-94 was used to obtain the values of the moduli of elasticity and rupture, tension at the proportional limit, and maximum force of the subjects. It was observed that different durations and temperatures altered the mechanical strength of the wood of the four species studied. The 2 h residence time is the most recommended for conducting thermal modification. This procedure modifies the mechanical resistance of wood in a positive manner, with exposure temperatures ranging between 120 ºC and 180 ºC being the most recommended. The thermal treatment carried out for 4 h is not recommended for structural purposes because of the decrease in flexural strength

O objetivo do presente estudo foi avaliar o efeito da modificação térmica em diferentes tempos e temperaturas na resistência mecânica da madeira de espécies provenientes de um sistema agroflorestal. Para tanto, foram avaliados três indivíduos de Parapiptadenia rigida (Benth.) Brenan, Peltophorum dubium (Spreng.) Taub., Eucalyptus grandis × Eucalyptus urophylla e Schizolobium parahyba (Vell.) Blake, todos com nove anos de idade. Após o dimensionamento, as amostras passaram pelo processo de modificação térmica durante 2h e 4h realizado em estufa nas temperaturas de 120 °C, 150 °C, 180 °C e 210 °C, além da testemunha. Para avaliação da resistência mecânica, seguiu-se a norma técnica ASTM D 143-94, obtendo-se os valores de módulos de elasticidade e ruptura, tensão no limite proporcional e força máxima. Observou-se que os diferentes tempos e temperaturas alteram a resistência mecânica das quatro espécies estudadas. O tempo de 2 h de permanência é o mais recomendado para a realização da modificação térmica. O procedimento modifica a resistência mecânica da madeira de uma forma positiva, sendo que as temperaturas de exposição que variaram entre 120 °C e 180 ºC são as mais recomendadas. A modificação térmica realizada pelo período de 4 h não é recomendada para fins estruturais, pelo fato do decréscimo da resistência à flexão.

Utilização de caneca de alumínio como material alternativo para temperatura de globo de Vernon / Use of aluminum mug as alternative material for Vernon globe temperature

Diversos estudos relacionados à viabilidade e eficiência do uso de materiais alternativos ao globo de Vernon têm sido realizados, principalmente em decorrência ao preço elevado do cobre, componente do instrumento padrão. O objetivo foi avaliar a eficiência da utilização de caneca de alumínio como material alternativo para substituição do globo de Vernon. Para a confecção do protótipo empregou-se uma caneca de alumínio, utilizada em pistola de pintura, com capacidade de 50 ml. A caneca foi pintada com tinta preto-fosca, em duas camadas e um termômetro de mercúrio foi inserido ao centro. Para realização dos testes foram utilizados quatro equipamentos (dois globos de Vernon e dois globos negros alternativos). Foram efetuados testes prévios de comportamento temporal. Estabelecido o tempo, as temperaturas dos globos foram coletadas durante sete dias consecutivos, em três períodos, de 15 minutos cada. Os registros de temperatura foram realizados a cada cinco minutos, num total de 84 por equipamento. Os dados foram submetidos a análise de correlação de Pearson. Os resultados indicaram correlação positiva com o r2 de 0,9927, estabelecendo uma forte correlação entre os resultados de temperatura média do globo negro alternativo e globo de Vernon. Conclui-se que o globo negro alternativo do tipo caneca de alumínio mostrou-se eficiente para aferição da temperatura de globo negro em estudos de ambiência em substituição ao Globo de Vernon.(AU)

Several studies related to the feasibility and efficiency of using alternative materials to Vernon's globe have been carried out, mainly due to the high price of copper, a component of the standard instrument. The objective was to evaluate the efficiency of using an aluminum mug as an alternative material for replacing Vernon's globe. To make the prototype, an aluminum mug was used, used in a paint gun, with a capacity of 50 ml. The mug was painted with matte black paint, in two layers and a mercury thermometer was inserted in the center. Four pieces of equipment were used to carry out the tests (two Vernon globes and two alternative black globes). Previous temporal behavior tests were carried out. Once the time was established, the globes' temperatures were collected for seven consecutive days, in three periods of 15 minutes each. Temperature records were taken every five minutes, a total of 84 per equipment. Data were subjected to Pearson's correlation analysis. The results indicated a positive correlation with the r2 of 0.9927, establishing a strong correlation between the mean temperature results of the alternative black globe and Vernon's globe. It is concluded that the alternative black globe of the aluminum mug type proved tobe efficient for measuring the temperature of the black globe in ambience studies, replacing the Vernon Globe.(AU)

A comprehensive review on monitoring and purification of water through tunable 2D nanomaterials / Uma revisão abrangente sobre monitoramento e purificação de água através de nanomateriais 2D sintonizáveis

Instead of typical household trash, the heavy metal complexes, organic chemicals, and other poisons produced by huge enterprises threaten water systems across the world. In order to protect our drinking water from pollution, we must keep a close eye on the situation. Nanotechnology, specifically two-dimensional (2D) nanomaterials, is used in certain wastewater treatment systems. Graphene, g-C3N4, MoS2, and MXene are just a few examples of emerging 2D nanomaterials that exhibit an extraordinary ratio of surface (m3), providing material consumption, time consumption, and treatment technique for cleaning and observing water. In this post, we'll talk about the ways in which 2D nanomaterials may be tuned to perform certain functions, namely how they can be used for water management. The following is a quick overview of nanostructured materials and its possible use in water management: Also discussed in length are the applications of 2D nanomaterials in water purification, including pollutant adsorption, filtration, disinfection, and photocatalysis. Fluorescence sensors, colorimetric, electrochemical, and field-effect transistors are only some of the devices being studied for their potential use in monitoring water quality using 2D nanomaterials. Utilizing 2D content has its benefits and pitfalls when used to water management. New developments in this fast-expanding business will boost water treatment quality and accessibility in response to rising awareness of the need of clean, fresh water among future generations.

Em vez do lixo doméstico típico, os complexos de metais pesados, produtos químicos orgânicos e outros venenos produzidos por grandes empresas ameaçam os sistemas de água em todo o mundo. Para proteger nossa água potável da poluição, devemos ficar de olho na situação. A nanotecnologia, especificamente nanomateriais bidimensionais (2D), é usada em certos sistemas de tratamento de águas residuais. Grafeno, g-C3N4, MoS2 e MXene são apenas alguns exemplos de nanomateriais 2D emergentes que exibem uma extraordinária proporção de superfície (m3), proporcionando consumo de material, consumo de tempo e técnica de tratamento para limpeza e observação da água. Neste trabalho, trataremos das maneiras pelas quais os nanomateriais 2D podem ser ajustados para desempenhar determinadas funções, ou seja, como eles podem ser usados para o gerenciamento de água. A seguir, uma breve visão geral dos materiais nanoestruturados e seu possível uso no gerenciamento de água. Serão também discutidas detalhadamente as aplicações de nanomateriais 2D na purificação de água, incluindo adsorção de poluentes, filtração, desinfecção e fotocatálise. Sensores de fluorescência, colorimétricos, eletroquímicos e transistores de efeito de campo são apenas alguns dos dispositivos que estão sendo estudados para uso potencial no monitoramento da qualidade da água usando nanomateriais 2D. A utilização de conteúdo 2D tem seus benefícios e armadilhas quando utilizada para gerenciamento de água. Novos desenvolvimentos neste negócio em rápida expansão visam aumentar a qualidade e a acessibilidade do tratamento de água em resposta à crescente conscientização sobre a necessidade de água limpa e fresca entre as gerações futuras.

Broiler behavior: influence of thermal stress, age, and period of the day

This study evaluated the behavior of broiler chickens subjected to thermal stress during different periods of the day and age of birds. A total of 180 one-day-old male broiler chicks were allocated to three chambers. Each chamber contained five boxes, with 12 chicks/box. Birds were assigned to a completely randomized design. The birds were filmed, and the images recorded every minute during the two periods: morning (from 08:00 to 09:00 h) and afternoon (from 17:00 to 18:00 h), at 7, 14, and 35 d of age. The frequency of the behavioral category (water intake, feed intake, resting, exploration, and comfort) was determined. Data were subjected to variance analysis for mixed models with rearing temperatures (cold, usual, and hot) and age of birds (7, 14, and 35 d) as subdivided plot, and periods of the day (morning and afternoon) as sub-subdivided plot. Birds at cold and usual temperatures showed higher feed intake than those at hot temperature in the morning. Birds exposed to cold and usual temperatures explored the environment less frequently at 35 d when compared with 14 d. However, chickens at hot temperature showed decreased exploration according to the increase of age. Birds spent more time feeding during the morning, regardless of age and rearing temperature. Also, during this period of the day, chickens spent most of the time exploring the environment. The frequency of feed intake and exploration decreases with the increase of age. The similarity of behavior between chickens reared at cold and usual temperatures may be due to a change in the thermal comfort zone of the birds. It suggests that the real thermal comfort temperature is between the two temperature ranges studied (cold and usual).

Surviving heat: Resilience of Nellore bulls to solar radiation exposure

We aimed to assess the physiological and biophysical responses of Nellore bulls exposed to solar radiation in semiarid conditions throughout the day. Sixteen Nellore bulls were examined in Tibau city, Northeast Brazil (5°52ʹ South, 37°20ʹ West, and 37 m above sea level) over four nonconsecutive days, with data collection taking place at one-hour intervals between 7:00 am and 5:00 pm. Four animals were analyzed each day and kept exposed to the sun for the duration of the study. The average age of the animals was three years, and their average body weight was 650±32 kg. The meteorological station measured air temperature (°C), relative humidity (%), solar radiation (W.m-2 ), and black globe temperatures (°C) every minute, while a digital anemometer thermohygrometer measured wind speed (m.s-1 ) at the same time. Respiratory rate (breaths.min-1 ), expired air temperature (°C), rectal temperature (°C), and body surface temperature (°C) were measured as physiological variables. Biophysical equations were used to estimate the sensible and latent heat transfer mechanisms (W.m-2 ). The air temperature ranged from 28.5 to 32.5°C, and direct solar radiation was between 21 and 891 W.m-². Between 11:00 am and 1:00 pm, the study observed heat gain through longwave radiation, which reached an average of 250 W.m-2 , with a significant increase (P < 0.05) in respiratory rate and body surface temperature during this time. Convection was significant in heat dissipation, particularly when the wind speed was increased from 11:00 am. However, latent heat loss mechanisms were more effective in losing excess body heat under total sun exposure, despite the positive effect of convection. The study findings showed that Nellore bulls maintained their body temperature within a narrow range even when exposed to high solar radiation, thus demonstrating the efficiency of physiological and biophysical mechanisms during times of greater thermal challenge.(AU)

Thermo-resistant enzyme-producing microorganisms isolated from composting

Abstract Organo-mineral fertilizers supplemented with biological additives are an alternative to chemical fertilizers. In this study, thermoresistant microorganisms from composting mass were isolated by two-step procedures. First, samples taken at different time points and temperatures (33 days at 52 ºC, 60 days at 63 ºC, and over 365 days at 26 ºC) were pre-incubated at 80 oC for 30 minutes. Second, the microbial selection by in vitro culture-based methods and heat shock at 60 oC and 100 oC for 2h and 4h. Forty-one isolates were able to grow at 60 °C for 4h; twenty-seven at 100 °C for 2h, and two at 100 °C for 4h. The molecular identification by partial sequencing of the 16S ribosomal gene using universal primers revealed that thirty-five isolates were from eight Bacillus species, one Brevibacillus borstelensis, three Streptomyces thermogriseus, and two fungi (Thermomyces lanuginosus and T. dupontii). Data from amylase, phytase, and cellulase activity assays and the enzymatic index (EI) showed that 38 of 41 thermo-resistant isolates produce at least one enzyme. For amylase activity, the highest EI value was observed in Bacillus licheniformis (isolate 21C2, EI= 4.11), followed by Brevibacillus borstelensis (isolate 6C2, EI= 3.66), Bacillus cereus (isolate 18C2, EI= 3.52), and Bacillus paralicheniformis (isolate 20C2, EI= 3.34). For phytase, the highest EI values were observed for Bacillus cereus (isolate 18C2, EI= 2.30) and Bacillus licheniformis (isolate 3C1, EI= 2.15). Concerning cellulose production, B. altitudinis (isolate 6C1) was the most efficient (EI= 6.40), followed by three Bacillus subtilis (isolates 9C1, 16C2, and 19C2) with EI values of 5.66, 5.84, and 5.88, respectively, and one B. pumilus (isolate 27C2, EI= 5.78). The selected microorganisms are potentially useful as a biological additive in organo-mineral fertilizers and other biotechnological processes.

Resumo Os fertilizantes organo-minerais suplementados com aditivos biológicos são uma alternativa aos adubos químicos. Neste estudo, microrganismos termoresistentes foram isolados de compostagem por procedimentos de duas etapas. Inicialmente, as amostras tomadas em diferentes períodos e temperaturas (33 dias a 52 ºC, 60 dias a 63 ºC e mais de 365 dias a 26 ºC) foram pré-incubadas a 80 oC por 30 minutos. Posteriormente, a seleção microbiana foi conduzida por métodos baseados em cultura in vitro e choque térmico a 60 oC e 100 oC por 2h e 4h. Quarenta e um isolados foram capazes de crescer a 60 °C por 4h; vinte e sete a 100 °C por 2h e dois a 100 °C por 4h. A identificação molecular por sequenciamento parcial do gene ribossomal 16S usando primers universais revelou que trinta e cinco isolados eram de oito espécies de Bacillus, um Brevibacillus borstelensis, três Streptomyces thermogriseus e dois fungos (Thermomyces lanuginosus e T. dupontii). Os dados dos ensaios de atividade de amilase, fitase e celulase e o índice enzimático (IE) mostraram que 38 dos 41 isolados termorresistentes produziram pelo menos uma enzima. Para a atividade da amilase, o maior valor de IE foi observado em Bacillus licheniformis (isolado 21C2, IE = 4,11), seguido por Brevibacillus borstelensis (isolado 6C2, IE = 3,66), Bacillus cereus (isolado 18C2, IE = 3,52) e Bacillus paralicheniformis (isolado 20C2, IE = 3,34). Para a fitase, os maiores valores de IE foram observados para B. cereus (isolado 18C2, IE = 2,30) e B. licheniformis (isolado 3C1, IE = 2,15). Em relação à produção de celulose, B. altitudinis (isolado 6C1) foi o mais eficiente (IE = 6,40), seguido por três Bacillus subtilis (isolados 9C1, 16C2 e 19C2) com valores de IE de 5,66, 5,84 e 5,88, respectivamente, e um B. pumilus (isolado 27C2, IE = 5,78). Pode-se inferir que os microrganismos selecionados são potencialmente úteis como aditivos biológicos em fertilizantes organo-minerais e outros processos biotecnológicos.

Ingestive behavior of Holstein × Zebu cows managed on deferred supplemented pasture

This study aimed to evaluate the ingestive behavior of F1 Holstein × Zebu cows grazing on deferred pasture receiving different supplementation strategies. The experimental design was completely randomized, in a 3×4 factorial, with three supplementation strategies and four evaluation periods. The ingestive behavior of 24 cows divided into three groups of supplementation provided at milking was observed, and two of these groups received protein in the pasture. Ingestive behavior was monitored every 10 minutes for 24 hours and analyzed in the form of periods (morning, afternoon, night, and dawn) and total time. The animals remained longer grazing during the afternoon when the BGHI presented values of 83.8. Protein consumption did not influence grazing time but interfered with forage consumption. For the total grazing time, the animals in group 2 spent less time grazing. The groups of animals presented no difference concerning the time spent on rumination and idleness. During night and dawn, when the climate was characterized as thermal comfort, the animals spent more time ruminating. The climatic conditions did not influence the ingestive behavior, as the grazing peak was observed at times of higher BGHI. However, supplementation of the animals in group 2 modified the ingestive behavior of F1 H × Z cows.

Effect of temperature on embryonic development and first exogenous feeding of goldfish Carassius auratus (Linnaeus, 1758) / Efeito da temperatura no desenvolvimento embrionário e na primeira alimentação exógena do goldfish Carassius auratus (Linnaeus, 1758)

Goldfish or Kinguio is a widely marketed species worldwide due to the ornamental market. There is some lack of acknowledgment of the production of the species under specific climatic conditions. To evaluate the effect of temperature on embryonic development and the first exogenous feeding of goldfish, an experiment was proposed. Fifteen incubators, organized in five treatments (18, 22, 26, 30, and 34 °C) with three replications each, were used to keep the fertilized goldfish eggs until the first exogenous feeding of the larvae. The main development events were observed to understand the possible effects of these temperatures on embryos and larvae of the species. Temperature influences embryo development and the time of first exogenous feeding of goldfish. The temperature of 34 °C was lethal to the species causing 100% of anomalies in the embryos and larvae. The experiment data allow us to conclude that the species presents a maximum thermal limit during embryogenesis, and these data are important to the aquaculture industry and to understand the effect of climate changes on goldfish. The data obtained in this experiment will assist in the management of invasive species and production of the species (aquaculture).

O peixe dourado ou Kinguio é uma espécie amplamente comercializada em todo o mundo devido ao mercado ornamental. Existe alguma falta de conhecimento da produção da espécie em condições climáticas específicas. Para avaliar o efeito da temperatura no desenvolvimento embrionário e na primeira alimentação exógena do Kinguio, um experimento foi proposto. Quinze incubadoras, organizadas em cinco tratamentos (18, 22, 26, 30 e 34 °C) com três repetições cada, foram utilizadas para manter os ovos fertilizados de Kinguio até a primeira alimentação exógena das larvas. Os principais eventos do desenvolvimento foram observados para entender os possíveis efeitos dessas temperaturas em embriões e larvas da espécie. A temperatura influencia o desenvolvimento do embrião e o tempo da primeira alimentação exógena do Kinguio. A temperatura de 34°C foi letal para a espécie causando 100% de anomalias nos embriões e larvas. Os dados do experimento permitem concluir que a espécie apresenta um limite térmico máximo durante a embriogênese, sendo esses dados importantes para a indústria da aquicultura e para entender o efeito das mudanças climáticas no Kinguio. Os dados obtidos neste experimento auxiliarão no manejo de espécies invasoras e na produção da espécie (aquicultura).

Physical and environmental characteristics of the compost barn system and its effects on the physical integrity, reproduction and milk production of dairy cattle: a scoping review

Compost barn (CB), although recent in Brazil, is increasingly gaining popularity among the intensive breeding systems in the dairy sector. This system promises to offer several advantages to producers and animals: such as providing an environment in which milk production is increased and the physical integrity of cattle is improved, reducing mastitis episodes, and promoting thermal comfort for animals. Another factor that highlights CB concerning other intensive systems is the composting process, generated by the deposition of carbon-rich materials (bedding) with nitrogen sources (urine and feces) from animals. For the full benefits of this composting to be achieved, management, especially of bedding, must be carried out correctly, considering the development requirements of the compost, the use of quality organic material, adequate ventilation, and an ideal rate of animal capacity, so that the generation of heat occurs efficiently. However, there is a general lack of information about the CB system. Hence, there is an increasing need for data surveys of Brazilian regions to compare the diversity of materials used in bedding, assessing energy efficiency and performance over time. Therefore, this bibliographical review addressed the main points of the CB system approach, considering that studies such as this are consistently relevant for rural producers, facilitating decisions regarding the implementation and management of the CB system on their farms.

Evaluation of the thermoregulatory response of goats naturally exposed to the tropical climate using longitudinal data / Avaliação da resposta termorregulatória de cabras expostas naturalmente ao clima tropical a partir do uso de dados longitudinais

Rectal temperature (RT), heart rate (HR), and respiratory rate (RR), determined as repeated measurements over time in female goats, were used to identify covariance matrices that best fit the data for residual modeling on these three traits. Then, based on this result, the goats' responses to heat were evaluated. Five matrices were found with convergence for the three traits. The Heterogeneous Compound Symmetry matrix showed a good fit for modeling the residual associated with RT, whereas the Heterogeneous Autoregressive matrix had a better fit for RR and HR, according to the Akaike Information Criteria (AIC), corrected AIC (AICc), and Schwarz Bayesian Information Criterion (BIC) used. After adjusting the residual data for these three traits, a mixed-model analysis was used to evaluate collection period (3), physiological stage (3), and animal age (3) as fixed effects. Residual modeling interfered differently with the p-value associated with the fixed effects studied. Collection period and interactions did not influence the variation in RT (P>0.761), which was within the standard range for goats in the tropics, while the physiological stage of the goats affected it (P<0.05). Rectal temperature, HR, and RR tend to show covariance structures that can be modeled using specific residual covariance matrices, that is, the heterogeneous compound symmetry matrix best suits RT data, whereas the heterogeneous autoregressive matrix is better suited for HR and RR, which are usually correlated. The goats of the evaluated breed maintain RT within the range of variation displayed by breeds adapted to a hot environment, regardless of their physiological condition. Variations occur in RR and HR, without, however, exceeding the normal range for goats. Pregnancy causes goats to raise their RR in the rainy season of the year in the region in order to maintain RT within the normal range for the species.(AU)

Utilizou-se a Temperatura retal (TR), Frequências cardíaca (FC) e respiratória (FR) aferidas como medidas repetidas no tempo em fêmeas caprinas, objetivando-se identificar matrizes de estruturas de covariância que melhor se ajustou aos dados para modelagem do resíduo nessas três características e, em seguida, avaliou-se a respostas de cabras ao calor, com base nesse resultado. Constatou-se cinco matrizes com convergência nas três características. A Simétrica composta heterogênea ajustou-se bem para modelagem do resíduo associado a TR, enquanto a Autorregressiva heterogênea ajustou-se melhor para a FR e FC, de acordo com os critérios de informação de Akaike (AIC), Akaike corrigido (AICc) e o Bayesiano de Schwarz (BIC) utilizados. Com o resíduos de dados dessas três características ajustados, utilizou-se uma análise com modelos mistos para avaliar a Época de coleta (3), Estado fisiológico (3) e Idade do animal (3) foram como efeitos fixos. Constatou-se que a modelagem do resíduo interferiu de modo diferenciado no p valor associado aos efeitos fixos estudados. A época da coleta e interações não influenciaram a variação da TR (P>0,761), que oscilou dentro da faixa padrão para caprinos nos trópicos, mas o Estágio fisiológico da cabra sim (P<0,05). A Temperatura retal e as Frequências cardíaca e respiratória tendem a apresentar estruturas de covariâncias modeláveis com utilização de matrizes de covariâncias residuais especificas, ou seja, a matriz Simétrica composta heterogênea mais adequada para dados da Temperatura retal, enquanto a Autorregressiva heterogênea para as Frequências cardíaca e respiratória, geralmente correlacionas. As cabras da raça avaliadas mantêm a temperatura retal dentro da amplitude de variação apresentada por raças adaptadas a ambiente quente. Isso ocorre independente da condição fisiológica que se encontra, mas com ocorrência de variação na frequência respiratória e cardíaca, não excedendo, no entanto, a faixa normal para caprinos. A gestação condiciona a cabra a elevar a FR na época chuvosa do ano na região para manter a TR na faixa de amplitude normal para caprinos.(AU)

Thermo-resistant enzyme-producing microorganisms isolated from composting / Microrganismos produtores de enzimas termo-resistentes isolados de compostagem

Organo-mineral fertilizers supplemented with biological additives are an alternative to chemical fertilizers. In this study, thermoresistant microorganisms from composting mass were isolated by two-step procedures. First, samples taken at different time points and temperatures (33 days at 52 ºC, 60 days at 63 ºC, and over 365 days at 26 ºC) were pre-incubated at 80 oC for 30 minutes. Second, the microbial selection by in vitro culture-based methods and heat shock at 60 oC and 100 oC for 2h and 4h. Forty-one isolates were able to grow at 60 °C for 4h; twenty-seven at 100 °C for 2h, and two at 100 °C for 4h. The molecular identification by partial sequencing of the 16S ribosomal gene using universal primers revealed that thirty-five isolates were from eight Bacillus species, one Brevibacillus borstelensis, three Streptomyces thermogriseus, and two fungi (Thermomyces lanuginosus and T. dupontii). Data from amylase, phytase, and cellulase activity assays and the enzymatic index (EI) showed that 38 of 41 thermo-resistant isolates produce at least one enzyme. For amylase activity, the highest EI value was observed in Bacillus licheniformis (isolate 21C2, EI= 4.11), followed by Brevibacillus borstelensis (isolate 6C2, EI= 3.66), Bacillus cereus (isolate 18C2, EI= 3.52), and Bacillus paralicheniformis (isolate 20C2, EI= 3.34). For phytase, the highest EI values were observed for Bacillus cereus (isolate 18C2, EI= 2.30) and Bacillus licheniformis (isolate 3C1, EI= 2.15). Concerning cellulose production, B. altitudinis (isolate 6C1) was the most efficient (EI= 6.40), followed by three Bacillus subtilis (isolates 9C1, 16C2, and 19C2) with EI values of 5.66, 5.84, and 5.88, respectively, and one B. pumilus (isolate 27C2, EI= 5.78). The selected microorganisms are potentially useful as a biological additive in organo-mineral fertilizers and other biotechnological processes.

Os fertilizantes organo-minerais suplementados com aditivos biológicos são uma alternativa aos adubos químicos. Neste estudo, microrganismos termoresistentes foram isolados de compostagem por procedimentos de duas etapas. Inicialmente, as amostras tomadas em diferentes períodos e temperaturas (33 dias a 52 ºC, 60 dias a 63 ºC e mais de 365 dias a 26 ºC) foram pré-incubadas a 80 oC por 30 minutos. Posteriormente, a seleção microbiana foi conduzida por métodos baseados em cultura in vitro e choque térmico a 60 oC e 100 oC por 2h e 4h. Quarenta e um isolados foram capazes de crescer a 60 °C por 4h; vinte e sete a 100 °C por 2h e dois a 100 °C por 4h. A identificação molecular por sequenciamento parcial do gene ribossomal 16S usando primers universais revelou que trinta e cinco isolados eram de oito espécies de Bacillus, um Brevibacillus borstelensis, três Streptomyces thermogriseus e dois fungos (Thermomyces lanuginosus e T. dupontii). Os dados dos ensaios de atividade de amilase, fitase e celulase e o índice enzimático (IE) mostraram que 38 dos 41 isolados termorresistentes produziram pelo menos uma enzima. Para a atividade da amilase, o maior valor de IE foi observado em Bacillus licheniformis (isolado 21C2, IE = 4,11), seguido por Brevibacillus borstelensis (isolado 6C2, IE = 3,66), Bacillus cereus (isolado 18C2, IE = 3,52) e Bacillus paralicheniformis (isolado 20C2, IE = 3,34). Para a fitase, os maiores valores de IE foram observados para B. cereus (isolado 18C2, IE = 2,30) e B. licheniformis (isolado 3C1, IE = 2,15). Em relação à produção de celulose, B. altitudinis (isolado 6C1) foi o mais eficiente (IE = 6,40), seguido por três Bacillus subtilis (isolados 9C1, 16C2 e 19C2) com valores de IE de 5,66, 5,84 e 5,88, respectivamente, e um B. pumilus (isolado 27C2, IE = 5,78). Pode-se inferir que os microrganismos selecionados são potencialmente úteis como aditivos biológicos em fertilizantes organo-minerais e outros processos biotecnológicos.

Lesão facial grave em um gambá-de-orelha-branca (Didelphis albiventris) - tratamento com ozonioterapia / Severe facial wound in a white-eared opossum (Didelphis albiventris) - treatment with ozone therapy

Background: Ozone therapy (OT) is a type of treatment that uses ozone gas, which has high oxidizing power. OT has been utilized for various diseases and to accelerate the wound healing process and reduce inflammation. Additionally, OT is a low-cost treatment recommended for patients that can be easily restrained. There are several methods of ozone administration, including topical use through bagging, cupping, or rectal insufflation, in addition to ozonated autohemotherapy. Based on the benefits of OT and the scarcity of reports describing its effects on white-eared opossums (Didelphis albiventris), we report on the use of ozone in the treatment of a severe facial wound in a white-eared opossum. Case: An adult female white-eared opossum weighing 1.6 kg was rescued from a fire. The patient was pregnant, dehydrated, hypothermic and had an extensive burn wound in the facial region. Due to the stress of captivity and its aggressive behavior, the animal needed to be chemically restrained with dexmedetomidine and butorphanol. Following sedation, the cephalic vein was catheterized and intravenous fluid therapy with ringer lactate was started to treat dehydration. Next, enrofloxacin, meloxicam, and tramadol hydrochloride were administered. Body rewarming was performed with thermal bags. The microbial load of the wound was reduced with chlorhexidine degerming solution followed by washing with saline solution. A thin layer of silver sulfadiazine cream was applied to the wound area. Over the following days the patient was treated with OT using the cupping technique combined with ozonated sunflower oil. After the first applications there was an improvement in the appearance of the wound, which initially had a purulent aspect. After 20 days of treatment the wound showed good granulation and there were no signs of infection, and at 45 days of treatment it was completely healed. The patient was then released with her baby. Discussion: Ozone therapy was included in the patient's treatment plan to enhance the tissue repair process in order to reintroduce the animal to the wild in the shortest possible time. The strategy was successful in improving healing and reducing tissue inflammation and infection. Ozone is known to cause the inactivation of microorganisms as a result of the oxidation of phospholipids and lipoproteins present in the cell membrane of bacteria and to interrupt viral replication. Ozone helps in the perfusion of injured tissues, contributing to the entry of humoral components, which control inflammation. Moreover, ozone contributes to increase supply of oxygen and nutrients to tissues and to stimulate increased production of fibrinogen and formation of granulation tissue. Ozone increases the enzymatic antioxidant response, while also playing a role in immunoregulation. Ozone can be used in several ways and via various methods with potential routes including intravenous, urethral, intramuscular, subcutaneous, or intra-articular, in addition to rectal and intramammary insufflation. Immunomodulatory, anti-inflammatory, analgesic, and antiseptic effects can be achieved with different doses and concentrations, which enables its application in different types of pathologies. Because of the aggressive behavior of the animal, in the current case we opted for the cupping technique combined with ozonated oil, both techniques which can be administered easily with only physical restraint of the patient. Cupping allows for the provision of a higher concentration of ozone gas locally whereas the ozonated oil maintains the effect of the gas for slightly longer, enhancing its effect and promoting tissue repair. The present report showed that OT is an effective alternative for the treatment of burn wounds in opossums, without causing adverse effects to the patient or her baby.

Uso da termografia e ultrassonografia power dopplerpara avaliação da resposta tecidual em falhas ósseas preenchidas com biomaterial em ovinos / Termography and power doppler sonography assessment for tissue response evaluation in sheep bone defects filled with biomaterial

Biomateriaistem diversas indicações como auxiliares no processo de reparação óssea, além de terem função de substituto ósseo em perdas extensas. Diversas são as vantagens de sua utilização, como por exemplo, auxílio na osteocondutividade, estímulo de neovascularização, potencial antimicrobiano, entre outros. Falhas ósseas foram realizadas nas tíbias de seis ovinos da raça Santa Inês e preenchidas com biomaterial à base de quitosana, colágeno e hidroxiapatita. Um membro foi considerado controle e outro membro tratado segundo estudo randomizado. Foram realizadas avaliações termográficas e por ultrassonografia Power Dopplerem todos os animais do estudo, semanalmente, nos dias D0, D7, D14, D21, D28, D35, D42 e D56. Não houve diferenças significativas com relação à temperatura mínima, máxima e média entre os grupos com biomaterial e controle nas imagens termográficas. Houveram variações com relação ao tempo dentro de ambos os grupos. Com relação à presença de vasos na ultrassonografia Power Dopplernão houve diferenças estatísticas entre os grupos, exceto no dia 21 (P=0,031). Dentro das possibilidades de avaliação que os exames de imagem fornecem, a termografia e a ultrassonografia Power Dopplermostraram-se ferramentas não invasivas de avaliação pós-operatória de processo inflamatório e neovascularização, sendo realizadas semanalmente, permitindo acompanhamento fidedigno e detalhado ao longo do experimento, sem gerar desconforto ou estresse aos animais. Não houve indícios de complicações relacionadas ao biomaterial.(AU)

Biomaterials have several indications supporting the bone repair process, besides having bone substitute function in extensive losses. There are several advantages of its use, such as contribution in osteoconductivity, stimulation of neovascularization, antimicrobial potential, among others.Tibial bone defects was performed in six Santa Inês breed ewes and implanted with chitosan, collagen and hydroxyapatite biomaterial. One limb was considered the control limb and the other one the biomateriallimb, chosenrandomly. Thermographic and Power Dopplersonography was performed in all animals, weekly for 56 days. The thermography showed no significant differences related to low, high and mean temperature between the control and the biomaterial groups. Statisticalvariations were found between time in both groups. The visualization of neovascularization with the Power Dopplersonography did not present statistical differences, except for day 21 (P=0,031). Within the possibilities provided by imaging exams, thermography and Power Doppler sonography demonstrate to be non-invasive methods for post-operative evaluation of inflammatory process and neovascularization. The weekly management allowed reliable and detailed monitoring throughout the experiment, without causingdiscomfort or stress to the animals. There was no evidence of biomaterial complications.(AU)

Thermo-resistant enzyme-producing microorganisms isolated from composting / Microrganismos produtores de enzimas termo-resistentes isolados de compostagem

Organo-mineral fertilizers supplemented with biological additives are an alternative to chemical fertilizers. In this study, thermoresistant microorganisms from composting mass were isolated by two-step procedures. First, samples taken at different time points and temperatures (33 days at 52 ºC, 60 days at 63 ºC, and over 365 days at 26 ºC) were pre-incubated at 80 oC for 30 minutes. Second, the microbial selection by in vitro culture-based methods and heat shock at 60 oC and 100 oC for 2h and 4h. Forty-one isolates were able to grow at 60 °C for 4h; twenty-seven at 100 °C for 2h, and two at 100 °C for 4h. The molecular identification by partial sequencing of the 16S ribosomal gene using universal primers revealed that thirty-five isolates were from eight Bacillus species, one Brevibacillus borstelensis, three Streptomyces thermogriseus, and two fungi (Thermomyces lanuginosus and T. dupontii). Data from amylase, phytase, and cellulase activity assays and the enzymatic index (EI) showed that 38 of 41 thermo-resistant isolates produce at least one enzyme. For amylase activity, the highest EI value was observed in Bacillus licheniformis (isolate 21C2, EI= 4.11), followed by Brevibacillus borstelensis (isolate 6C2, EI= 3.66), Bacillus cereus (isolate 18C2, EI= 3.52), and Bacillus paralicheniformis (isolate 20C2, EI= 3.34). For phytase, the highest EI values were observed for Bacillus cereus (isolate 18C2, EI= 2.30) and Bacillus licheniformis (isolate 3C1, EI= 2.15). Concerning cellulose production, B. altitudinis (isolate 6C1) was the most efficient (EI= 6.40), followed by three Bacillus subtilis (isolates 9C1, 16C2, and 19C2) with EI values of 5.66, 5.84, and 5.88, respectively, and one B. pumilus (isolate 27C2, EI= 5.78). The selected microorganisms are potentially useful as a biological additive in organo-mineral fertilizers and other biotechnological processes.(AU)

Os fertilizantes organo-minerais suplementados com aditivos biológicos são uma alternativa aos adubos químicos. Neste estudo, microrganismos termoresistentes foram isolados de compostagem por procedimentos de duas etapas. Inicialmente, as amostras tomadas em diferentes períodos e temperaturas (33 dias a 52 ºC, 60 dias a 63 ºC e mais de 365 dias a 26 ºC) foram pré-incubadas a 80 oC por 30 minutos. Posteriormente, a seleção microbiana foi conduzida por métodos baseados em cultura in vitro e choque térmico a 60 oC e 100 oC por 2h e 4h. Quarenta e um isolados foram capazes de crescer a 60 °C por 4h; vinte e sete a 100 °C por 2h e dois a 100 °C por 4h. A identificação molecular por sequenciamento parcial do gene ribossomal 16S usando primers universais revelou que trinta e cinco isolados eram de oito espécies de Bacillus, um Brevibacillus borstelensis, três Streptomyces thermogriseus e dois fungos (Thermomyces lanuginosus e T. dupontii). Os dados dos ensaios de atividade de amilase, fitase e celulase e o índice enzimático (IE) mostraram que 38 dos 41 isolados termorresistentes produziram pelo menos uma enzima. Para a atividade da amilase, o maior valor de IE foi observado em Bacillus licheniformis (isolado 21C2, IE = 4,11), seguido por Brevibacillus borstelensis (isolado 6C2, IE = 3,66), Bacillus cereus (isolado 18C2, IE = 3,52) e Bacillus paralicheniformis (isolado 20C2, IE = 3,34). Para a fitase, os maiores valores de IE foram observados para B. cereus (isolado 18C2, IE = 2,30) e B. licheniformis (isolado 3C1, IE = 2,15). Em relação à produção de celulose, B. altitudinis (isolado 6C1) foi o mais eficiente (IE = 6,40), seguido por três Bacillus subtilis (isolados 9C1, 16C2 e 19C2) com valores de IE de 5,66, 5,84 e 5,88, respectivamente, e um B. pumilus (isolado 27C2, IE = 5,78). Pode-se inferir que os microrganismos selecionados são potencialmente úteis como aditivos biológicos em fertilizantes organo-minerais e outros processos biotecnológicos.(AU)

Oat development in response to temperature / Desenvolvimento de aveia em respostaà temperatura

ABSTRACT: Temperature affects plant development therefore phyllochron has been used as a predictor for developmental events to define the time for agricultural managing practices. This study aims to evaluate changes in phyllochron and thermal sum required for flowering by oat genotypes developed at different decades at three temperature regimes; the effect of high temperature on phytomere development; and identify the development stage at the moment of meristem transition to reproductive stage. Three environments were obtained by sowing in the fall, in the spring, and under constant temperature (17oC), always at inductive photoperiod. Despite changes in nominal values small differences were found among genotypes' phyllochron. Adding specific optimal and maximum temperatures into the growing degree days' calculation demonstrated phyllochron stability among environments. Plant cycle length and thermal sum correlated with the number of developed phytomeres. UFRGS 078030-2 plants flowered earlier, had a small number of phytomeres, and greater tolerance to elevated temperatures than the other genotypes. More recent genotypes transit to reproductive stage at an earlier Haun stage than older ones.

RESUMO: A temperatura afeta o desenvolvimento das plantas, portanto o filocrono tem sido usado para prever eventos de desenvolvimento e estabelecer o momento adequado para práticas agrícolas. Esse estudo buscou avaliar mudanças em filocrono e soma térmica até o florescimento de genótipos de aveia desenvolvidos em diferentes décadas em três regimes térmicos; o efeito de altas temperaturas no desenvolvimento de fitômeros; e identificar o estágio de desenvolvimento em que ocorre a transição do meristema para a fase reprodutiva. Três ambientes foram estabelecidos pela semeadura no outono, na primavera e em temperatura constante (17oC), em fotoperíodo indutor. Apesar da alteração dos valores numéricos, houve pouca diferença entre os filocronos dos genótipos. A adição das temperaturas ótima e máxima específicas no cálculo de graus dias demonstrou a estabilidade de filocrono entre ambientes. O ciclo e a soma térmica correlacionaram-se com o número de fitômeros. UFRGS 078030-2 floresceu mais cedo, teve menos fitômeros e maior tolerância a altas temperaturas do que os demais genótipos. Os genótipos mais recentes transitam para a fase reprodutiva em estágios mais precoces da escala Haun, em comparação com os genótipos mais antigos.

Oat development in response to temperature / Desenvolvimento de aveia em resposta à temperatura

Temperature affects plant development therefore phyllochron has been used as a predictor for developmental events to define the time for agricultural managing practices. This study aims to evaluate changes in phyllochron and thermal sum required for flowering by oat genotypes developed at different decades at three temperature regimes; the effect of high temperature on phytomere development; and identify the development stage at the moment of meristem transition to reproductive stage. Three environments were obtained by sowing in the fall, in the spring, and under constant temperature (17ºC), always at inductive photoperiod. Despite changes in nominal values small differences were found among genotypes' phyllochron. Adding specific optimal and maximum temperatures into the growing degree days’ calculation demonstrated phyllochron stability among environments. Plant cycle length and thermal sum correlated with the number of developed phytomeres. UFRGS 078030-2 plants flowered earlier, had a small number of phytomeres, and greater tolerance to elevated temperatures than the other genotypes. More recent genotypes transit to reproductive stage at an earlier Haun stage than older ones.

A temperatura afeta o desenvolvimento das plantas, portanto o filocrono tem sido usado para prever eventos de desenvolvimento e estabelecer o momento adequado para práticas agrícolas. Esse estudo buscou avaliar mudanças em filocrono e soma térmica até o florescimento de genótipos de aveia desenvolvidos em diferentes décadas em três regimes térmicos; o efeito de altas temperaturas no desenvolvimento de fitômeros; e identificar o estágio de desenvolvimento em que ocorre a transição do meristema para a fase reprodutiva. Três ambientes foram estabelecidos pela semeadura no outono, na primavera e em temperatura constante (17ºC), em fotoperíodo indutor. Apesar da alteração dos valores numéricos, houve pouca diferença entre os filocronos dos genótipos. A adição das temperaturas ótima e máxima específicas no cálculo de graus dias demonstrou a estabilidade de filocrono entre ambientes. O ciclo e a soma térmica correlacionaram-se com o número de fitômeros. UFRGS 078030-2 floresceu mais cedo, teve menos fitômeros e maior tolerância a altas temperaturas do que os demais genótipos. Os genótipos mais recentes transitam para a fase reprodutiva em estágios mais precoces da escala Haun, em comparação com os genótipos mais antigos.

Oat development in response to temperature / Desenvolvimento de aveia em resposta à temperatura

Temperature affects plant development therefore phyllochron has been used as a predictor for developmental events to define the time for agricultural managing practices. This study aims to evaluate changes in phyllochron and thermal sum required for flowering by oat genotypes developed at different decades at three temperature regimes; the effect of high temperature on phytomere development; and identify the development stage at the moment of meristem transition to reproductive stage. Three environments were obtained by sowing in the fall, in the spring, and under constant temperature (17ºC), always at inductive photoperiod. Despite changes in nominal values small differences were found among genotypes' phyllochron. Adding specific optimal and maximum temperatures into the growing degree days calculation demonstrated phyllochron stability among environments. Plant cycle length and thermal sum correlated with the number of developed phytomeres. UFRGS 078030-2 plants flowered earlier, had a small number of phytomeres, and greater tolerance to elevated temperatures than the other genotypes. More recent genotypes transit to reproductive stage at an earlier Haun stage than older ones.(AU)

A temperatura afeta o desenvolvimento das plantas, portanto o filocrono tem sido usado para prever eventos de desenvolvimento e estabelecer o momento adequado para práticas agrícolas. Esse estudo buscou avaliar mudanças em filocrono e soma térmica até o florescimento de genótipos de aveia desenvolvidos em diferentes décadas em três regimes térmicos; o efeito de altas temperaturas no desenvolvimento de fitômeros; e identificar o estágio de desenvolvimento em que ocorre a transição do meristema para a fase reprodutiva. Três ambientes foram estabelecidos pela semeadura no outono, na primavera e em temperatura constante (17ºC), em fotoperíodo indutor. Apesar da alteração dos valores numéricos, houve pouca diferença entre os filocronos dos genótipos. A adição das temperaturas ótima e máxima específicas no cálculo de graus dias demonstrou a estabilidade de filocrono entre ambientes. O ciclo e a soma térmica correlacionaram-se com o número de fitômeros. UFRGS 078030-2 floresceu mais cedo, teve menos fitômeros e maior tolerância a altas temperaturas do que os demais genótipos. Os genótipos mais recentes transitam para a fase reprodutiva em estágios mais precoces da escala Haun, em comparação com os genótipos mais antigos.(AU)

Caryocar villosum attenuates inflammation by inhibiting CXCL1 activation and peripheral hyperalgesia through opioid pathway modulation / Caryocar villosum atenua a inflamação ao inibir a ativação de CXCL1 e a hiperalgesia periférica por meio da modulação da via opioide

The oil of Caryocar villosum is used in Amazonian folk medicine to treat pain and inflammatory conditions. So, we assessed the anti-inflammatory and antinociceptive properties of the ethanolic extract obtained from the fruit peels of this species. The acetic acid-induced writhing, carrageenan-induced mechanical hyperalgesia, formalin, carrageenan-induced paw edema and carrageenan-induced peritonitis tests were used on mice. The C. villosum ethanolic extract significantly inhibited the number of abdominal writhes, mechanical hyperalgesia and paw licking time in the second phase of the formalin test. At a dose of 300 mg kg-1, the extract also significantly reduced the volume of edema formed in the late phase and reduced the recruitment of leukocytes and neutrophils in the peritoneal cavity, as well as CXCL1 chemokine levels. It is suggested that the extract attenuates the leukocyte recruitment by inhibiting the CXCL1 activation. The peripheral antinociceptive activity occured through opioid pathway modulation because pretreatment with C. villosum ethanolic extract reversed the naltrexone-induced antinociception.(AU)

O óleo de Caryocar villosum é usado na medicina popular amazônica para tratar dores e condições inflamatórias. Assim, avaliamos as propriedades antiinflamatórias e antinociceptivas do extrato etanólico obtido das cascas dos frutos desta espécie. Os testes de contorções induzidas por ácido acético, hiperalgesia mecânica induzida por carragenina, formalina, edema de pata induzido por carragenina e peritonite induzida por carragenina foram usados em camundongos. O extrato etanólico de C. villosum obtido das cascas dos frutos inibiu significativamente o número de contorções abdominais, a hiperalgesia mecânica e o tempo de lambida da pata na segunda fase do teste de formalina. Na dose de 300 mg kg-1, o extrato também reduziu significativamente o volume de edema formado na fase tardia e reduziu o recrutamento de leucócitos e neutrófilos na cavidade peritoneal, bem como os níveis de quimiocina CXCL1. Sugere-se que o extrato atenua o recrutamento de leucócitos por meio da inibição da ativação de CXCL1. A atividade antinociceptiva periférica ocorre por meio da modulação da via opioide pois o pré-tratamento com o extrato etanólico de C. villosum reverteu a antinocicepção induzida pela naltrexona.(AU)

Effect of Temperature and Feeding Time on Shell Thickness

The objective of this study was to assess the effect of ambient temperature (T) and feeding time (FT) on eggshell thickness (ST) and egg weight (EW) of broiler breeder hens. Thirty 44-week-old Ross 308 broiler breeder hens were randomly distributed into six environmentally controlled chambers and kept in individual cages. Three thermal treatments were applied: 20 ºC (T1), cyclic 20-30 ºC (30 °C between 1000 h and 1800 h) (T2), and 30 ºC (T3). Birds received 180 g of commercial breeder food at 0730 h (FT1) or 1530 h (FT2). There were two replications per treatment and egg collection was performed for seven days. The eggs from the birds at T1 and T2 fed at 1530 h (T1FT2 and T2FT2 respectively) were significantly heavier than those laid by hens at the same T when fed in the morning (T1FT1 and T2FT1); eggs from T1FT1 and T2FT1 were heavier than the eggs from T3, but there were no significant differences between them. Both T and FT had significant effects on ST, but no significant interactions were found. Birds fed at 1530 h had the highest ST, whilst birds at T3 showed the lowest. Birds on T2 produced the thickest shells due to a higher ST in birds fed at 1530 h. Birds fed at 1530 h consumed their food between 1800 h and 2030 h, resulting in a higher dietary Ca2 + available during shell mineralization. The effect of FT and biphasic T treatments on ST in feed restricted broiler breeders should be interpreted considering the length of the high T phase to the actual food consumption time.(AU)