RESUMO
Here we have been focusing on mesoporous silica (MPS) as inorganic filler material to improve the mechanical strength of silicone rubbers. The MPS particles are more effective in reducing the coefficient of thermal expansion (CTE) and hardening silicone rubber composites when compared to commercially available nonporous silica particles. In this study, we utilize ultraviolet curing type silicone rubbers and prepare MPS composites according to a simple single-step method. From an industrial viewpoint, simplifying the fabrication processes is critical. The thermal stability and mechanical strength are examined in detail in order to showcase the effectiveness of MPS particles as filler materials.
RESUMO
This work reports the fabrication of mesoporous silica films with controllable wall thicknesses by spin coating of precursor solutions consisting of polystyrene-block-polybutadiene-block-polystyrene based triblock copolymers (Hydrogenated methyl Styrene Ethylene Butadiene methyl Styrene, HmSEBmS) and tetraethyl orthosilicate (TEOS) followed by calcination in air at 600 °C, for optical anti-reflection films. By changing the relative weight of the triblock polymer to TEOS, the pore-to-pore distance in the mesoporous silica film can be controlled without significantly affecting the size of the mesopores, thus, enabling effective control of the refractive index and porosity of the films. In terms of optical properties, the transmittance of the fabricated mesoporous silica film is approximately 3.3% higher than that of the uncoated glass substrate in the wavelength range of 400 to 750 nm.
RESUMO
Herein, we report the soft-templated preparation of mesoporous iron oxide using an asymmetric poly(styrene-b-acrylic acid-b-ethylene glycol) (PS-b-PAA-b-PEG) triblock copolymer. This polymer forms a micelle consisting of a PS core, a PAA shell, and a PEG corona in aqueous solutions, which can serve as a soft template. The mesoporous iron oxide obtained at an optimized calcination temperature of 400 °C exhibited an average pore diameter of 39 nm, with large specific surface area and pore volume of 86.9 m2 g-1 and 0.218 cm3 g-1, respectively. The as-prepared mesoporous iron oxide materials showed intrinsic peroxidase-like activities toward the catalytic oxidation of 3,3',5,5'-tertamethylbenzidine (TMB) in the presence of hydrogen peroxide (H2O2). This mimetic feature was further exploited to develop a simple colorimetric (naked-eye) and electrochemical assay for the detection of glucose. Both our colorimetric (naked-eye and UV-vis) and electrochemical assays estimated the glucose concentration to be in the linear range from 1.0 µM to 100 µM with a detection limit of 1.0 µM. We envisage that our integrated detection platform for H2O2 and glucose will find a wide range of applications in developing various biosensors in the field of personalized medicine, food-safety detection, environmental-pollution control, and agro-biotechnology.