Validating Intravascular Imaging with Serial Optical Coherence Tomography and Confocal Fluorescence Microscopy.

Atherosclerotic cardiovascular diseases are characterized by the formation of a plaque in the arterial wall. Intravascular ultrasound (IVUS) provides high-resolution images allowing delineation of atherosclerotic plaques. When combined with near infrared fluorescence (NIRF), the plaque can also be studied at a molecular level with a large variety of biomarkers. In this work, we present a system enabling automated volumetric histology imaging of excised aortas that can spatially correlate results with combined IVUS/NIRF imaging of lipid-rich atheroma in cholesterol-fed rabbits. Pullbacks in the rabbit aortas were performed with a dual modality IVUS/NIRF catheter developed by our group. Ex vivo three-dimensional (3D) histology was performed combining optical coherence tomography (OCT) and confocal fluorescence microscopy, providing high-resolution anatomical and molecular information, respectively, to validate in vivo findings. The microscope was combined with a serial slicer allowing for the imaging of the whole vessel automatically. Colocalization of in vivo and ex vivo results is demonstrated. Slices can then be recovered to be tested in conventional histology.

In Vivo Near-Infrared Fluorescence Imaging of Atherosclerosis Using Local Delivery of Novel Targeted Molecular Probes.

This study aimed to evaluate the feasibility and accuracy of a technique for atherosclerosis imaging using local delivery of relatively small quantities (0.04-0.4 mg/kg) of labeled-specific imaging tracers targeting ICAM-1 and unpolymerized type I collagen or negative controls in 13 rabbits with atheroma induced by balloon injury in the abdominal aorta and a 12-week high-cholesterol diet. Immediately after local infusion, in vivo intravascular ultrasonography (IVUS)-NIRF imaging was performed at different time-points over a 40-minute period. The in vivo peak NIRF signal was significantly higher in the molecular tracer-injected rabbits than in the control-injected animals (P < 0.05). Ex vivo peak NIRF signal was significantly higher in the ICAM-1 probe-injected rabbits than in controls (P = 0.04), but not in the collagen probe-injected group (P = 0.29). NIRF signal discrimination following dual-probe delivery was also shown to be feasible in a single animal and thus offers the possibility of combining several distinct biological imaging agents in future studies. This innovative imaging strategy using in vivo local delivery of low concentrations of labeled molecular tracers followed by IVUS-NIRF catheter-based imaging holds potential for detection of vulnerable human coronary artery plaques.

Validating a bimodal intravascular ultrasound (IVUS) and near-infrared fluorescence (NIRF) catheter for atherosclerotic plaque detection in rabbits.

Coronary artery disease is characterized by atherosclerotic plaque formation. Despite impressive advances in intravascular imaging modalities, in vivo molecular plaque characterization remains challenging, and different multimodality imaging systems have been proposed. We validated an engineered bimodal intravascular ultrasound imaging (IVUS) / near-infrared fluorescence (NIRF) imaging catheter in vivo using a balloon injury atherosclerosis rabbit model. Rabbit aortas and right iliac arteries were scanned in vivo after indocyanine green (ICG) injection, and compared to corresponding ex vivo fluorescence and white light images. Areas of ICG accumulation were colocalized with macroscopic atherosclerotic plaque formation. In vivo imaging was performed with the bimodal catheter integrating ICG-induced fluorescence signals into cross-sectional IVUS imaging. In vivo ICG accumulation corresponded to ex vivo fluorescence signal intensity and IVUS identified plaques.

Ultrasound guided fluorescence molecular tomography with improved quantification by an attenuation compensated Born-normalization and in vivo preclinical study of cancer.

Ultrasound imaging, having the advantages of low-cost and non-invasiveness over MRI and X-ray CT, was reported by several studies as an adequate complement to fluorescence molecular tomography with the perspective of improving localization and quantification of fluorescent molecular targets in vivo. Based on the previous work, an improved dual-modality Fluorescence-Ultrasound imaging system was developed and then validated in imaging study with preclinical tumor model. Ultrasound imaging and a profilometer were used to obtain the anatomical prior information and 3D surface, separately, to precisely extract the tissue boundary on both sides of sample in order to achieve improved fluorescence reconstruction. Furthermore, a pattern-based fluorescence reconstruction on the detection side was incorporated to enable dimensional reduction of the dataset while keeping the useful information for reconstruction. Due to its putative role in the current imaging geometry and the chosen reconstruction technique, we developed an attenuation compensated Born-normalization method to reduce the attenuation effects and cancel off experimental factors when collecting quantitative fluorescence datasets over large area. Results of both simulation and phantom study demonstrated that fluorescent targets could be recovered accurately and quantitatively using this reconstruction mechanism. Finally, in vivo experiment confirms that the imaging system associated with the proposed image reconstruction approach was able to extract both functional and anatomical information, thereby improving quantification and localization of molecular targets.

Development of a photoacoustic, ultrasound and fluorescence imaging catheter for the study of atherosclerotic plaque.

Atherosclerotic cardiovascular diseases are a major cause of death in industrialized countries. Molecular imaging modalities are increasingly recognized to be a promising avenue towards improved diagnosis and for the evaluation of new drug therapies. In this work, we present an acquisition system and associated catheter enabling simultaneous photoacoustic, ultrasound and fluorescence imaging of arteries designed for in vivo imaging. The catheter performance is evaluated in tissue-mimicking phantoms. Simultaneous imaging with three modalities is demonstrated at frame rates of 30 images per second for ultrasound and fluorescence and 1 image per 13 seconds for photoacoustic. Acquired radio-frequency ultrasound data could be processed to obtain radial strain elastograms. With motorized pullback, 3D imaging of phantoms was performed using the three modalities.

Low-cost three-dimensional imaging system combining fluorescence and ultrasound.

In this paper, we present a dual-modality imaging system combining three-dimensional (3D) continuous-wave transillumination fluorescence tomography with 3D ultrasound (US) imaging. We validated the system with two phantoms, one containing fluorescent inclusions (Cy5.5) at different depths, and another varying-thickness semicylindrical phantom. Using raster scanning, the combined fluorescence/US system was used to collect the boundary fluorescent emission in the X-Y plane, as well as recovered the 3D surface and position of the inclusions from US signals. US images were segmented to provide soft priors for the fluorescence image reconstruction. Phantom results demonstrated that with priors derived from the US images, the fluorescent reconstruction quality was significantly improved. As further evaluation, we show pilot in vivo results using an Apo-E mouse to assess the feasibility and performance of this system in animal studies. Limitations and potential to be used in artherosclerosis studies are then discussed.

Real-time diffuse optical tomography based on structured illumination.

A new optical acquisition scheme based on a pair of digital micromirror devices is developed and applied to three-dimensional tomographic imaging of turbid media. By using pairs of illumination-detection patterns with a single detector, we were able to perform high-resolution quantitative volumetric imaging of absorption heterogeneities embedded in optically thick samples. Additionally, a tomographic reconstruction algorithm was implemented on a graphical processor unit to provide optical reconstructions at a frame rate of 2 Hz. The structured illumination method proposed in this work has significant cost advantages over camera systems, as only a single detector is required. This configuration also has the potential to increase frame rate.