Two-Year Retrospective Patient-Reported Outcomes Following Superior Capsular Reconstruction.

PURPOSE: The purpose of this study was to evaluate the short-term patient-reported outcomes of superior capsular reconstruction (SCR) and identify factors contributing to the success or failure of the procedure at 2 years. METHODS: A retrospective review was performed on data prospectively collected from the Surgical Outcomes System database. Patient-reported outcomes (PROMs) including American Shoulder and Elbow Surgeons (ASES) score, Single Assessment Numeric Evaluation (SANE) score, visual analog scale for pain, and Veterans RAND 12-Item Health Survey (VR-12) were evaluated at a minimum of 2 years postoperatively and reported using a minimal clinically important difference (MCID) and the percent of maximal possible improvement (MPI). In addition, preoperative and intraoperative variables were evaluated in patients with and without a postoperative improvement in ASES and SANE scores meeting the threshold of MCID. RESULTS: Two-year follow-up data were available for 350 patients. Statistically significant improvements were noted in all PROMs at 2-year follow-up. In total, 240 patients (68.8%) achieved an MCID improvement of >17.5 in ASES score, and 185 patients (52.9%) achieved an MCID of >29.8 improvement in the SANE score. Primary SCRs were associated with a higher MPI in the ASES score (60.1% ± 39.8% vs 40.4% ± 47.9%; P = .025) and VR-12 physical score (14.0% ± 13.8% vs 8.0% ± 14.7%; P = .028) compared to revision repairs. Only diabetes was identified as a predictor of SANE score improvement (64.5% vs 62.2%; P = .041). CONCLUSIONS: SCR is associated with improvement in patient-reported outcomes at short-term follow-up, with 53% to 69% of patients achieving an improvement considered to meet the MCID. Greater improvement is expected when SCR is performed as a primary procedure rather than as a revision procedure for failed rotator cuff repair. LEVEL OF EVIDENCE: Level III, retrospective comparative study.

The Effect of Glenohumeral Fixation Angle on Deltoid Function During Superior Capsule Reconstruction: A Biomechanical Investigation.

PURPOSE: To evaluate the effect of dermal allograft fixation at different angles of glenohumeral abduction on deltoid forces during superior capsule reconstruction (SCR). METHODS: Fifteen cadaveric specimens were tested using a dynamic shoulder simulator. Following testing in the native state, shoulders underwent SCR in 2 of 5 possible fixation angles; 0°, 15°, 30°, 45°, or 60° of glenohumeral abduction, allowing for 6 specimens per group. Angles were measured radiographically with the glenoid fixed perpendicular to the floor. Maximum mean deltoid abduction force was compared among 5 separate conditions within each angle group: (1) native shoulder, (2) complete supraspinatus (SSP) and superior capsule tear, (3) SCR alone, (4) SCR with posterior margin sutured, and (5) SCR with anterior and posterior margins sutured. RESULTS: SSP tears significantly increased the maximum deltoid forces for all 5 fixation angles compared with the native state (P < .05). Specimens repaired at 0°, 30°, and 45° were unable to restore deltoid forces compared with the native state in any condition (P < .05). SCR at 15° with anterior and posterior margin convergence showed similar abduction forces compared with the native state (P = .19). When fixed at 60° abduction, SCR alone significantly reduced deltoid forces compared to SSP (Δ143N, P < .001) and native (Δ48N, P < .001). No significant differences were found between the 3 repair subtypes (SCR ± anterior/posterior margin repair) in the 60° group. CONCLUSIONS: SCR with anterior and posterior margin convergence tensioned at 15° of glenohumeral abduction showed similar deltoid abduction force requirements compared with the native state, whereas graft fixation in 60° significantly reduced deltoid force in all SCR conditions. CLINICAL RELEVANCE: Increased graft tension with a greater abduction angle may provide greater functional outcome by placing less load on the deltoid. In contrast, graft fixation in lower abduction angles may require additional margin convergence to reproduce native forces.

Biomechanical Effect of Superior Capsule Reconstruction Using a 3-mm and 6-mm Thick Acellular Dermal Allograft in a Dynamic Shoulder Model.

PURPOSE: To biomechanically compare the effect of superior capsule reconstruction (SCR) using a 3- and 6-mm thick acellular dermal allograft for the treatment of irreparable rotator cuff tears. METHODS: Eight fresh-frozen cadaveric shoulders were tested using a dynamic shoulder model. Maximum abduction angle (MAA), glenohumeral superior translation (ghST), subacromial peak contact pressure (sPCP), and cumulative deltoid force (cDF) were compared among 4 conditions: (1) intact shoulder, (2) simulated irreparable rotator cuff tear (RCT), (3) SCR using a 3-mm-thick acellular dermal allograft, (4) SCR using a 6-mm-thick acellular dermal allograft. RESULTS: Compared with the intact state, simulated irreparable RCTs significantly decreased MAA (P < .001), while significantly increasing ghST (P = .001), sPCP (P < .001), and cDF (P < .001). SCR with a 3-mm-thick graft significantly increased MAA (P = .01) and decreased ghST (P = .01) compared with the RCT state, however, showed similar sPCP and cDF. Compared with the torn state, SCR with a 6-mm-thick graft significantly increased MAA (P < .001) and significantly decreased ghST (P < .001), sPCP (P < .001), and cDF (P = .001). Using a 6-mm-thick graft demonstrated similar MAA, ghST, sPCP, and cDF compared with the intact state. When comparing the 3-mm to the 6-mm thick graft, significant differences were found in ghST (P = .03), sPCP (P < .001), and cDF (P = .02). CONCLUSIONS: SCR with a 6-mm-thick acellular dermal allograft better restored normal glenohumeral joint position and forces compared with a 3-mm-thick graft for the treatment of irreparable RCTs. CLINICAL RELEVANCE: Graft thickness may affect the clinical success following SCR with commercially available dermal allografts. Using a thicker (>3 mm) graft was able to biomechanically better restore native glenohumeral joint properties.

The Histology of a Healed Superior Capsular Reconstruction Dermal Allograft: A Case Report.

Acellular human dermal allograft commonly is used in the surgical treatment of complex rotator cuff tears, but little information is known about the biological fate of these grafts in human subjects. In this case report, the authors describe a patient who presented with a radiographically healed acellular human dermal allograft superior capsular reconstruction but had humeral head avascular necrosis. The healed superior capsular reconstruction, including graft-bone interfaces, was explanted after 7 months and sent for histologic analysis. A successful biological reconstruction of the superior capsule was found. The graft demonstrated gross and microscopic incorporation with the host, including a tendon-like structure, aligned collagen fibers, fibroblast-like cells, and no clear graft-host distinction. Cellular infiltration ranged from 5% to 14% (central graft) to 65% to 92% (sutured attachment points). Neovascularization and active graft remodeling were confirmed histologically. LEVEL OF EVIDENCE: V, case report.

Triple-Loaded Suture Anchors Versus a Knotless Rip Stop Construct in a Single-Row Rotator Cuff Repair Model.

PURPOSE: To compare the biomechanical properties of single-row repair with triple-loaded (TL) anchor repair versus a knotless rip stop (KRS) repair in a rotator cuff repair model. METHODS: Rotator cuff tears were created in 8 cadaveric matched-pair specimens and repaired with a TL anchor or KRS construct. In the TL construct, anchors were placed in the greater tuberosity and then all suture limbs were passed through the rotator cuff as simple sutures and tied. In the KRS construct, a 2-mm suture tape was passed through the tendon in an inverted mattress fashion, and a free suture was passed medial to the suture tape to create a rip-stop. Then, the suture tape and free suture were secured with knotless anchors. Displacement was observed with video tracking after cyclic loading, and specimens were loaded to failure. RESULTS: The mean load to failure was 438 ± 59 N in TL anchor repairs compared with 457 ± 110 N in KRS repairs (P = .582). The mean displacement with cyclic loading was 3.8 ± 1.6 mm in TL anchor repairs versus 4.3 ± 1.8 mm in the KRS group (P = .297). Mode of failure was consistent in both groups, with 6 of 8 failures in the TL anchor group and 7 of 8 failures in KRS group occurring from anchor pullout. CONCLUSIONS: There is no statistical difference in load to failure and cyclic loading between TL anchor and KRS single-row repair techniques. CLINICAL RELEVANCE: KRS repair technique may be an alternative method of repairing full-thickness supraspinatus tendon tears with a single-row construct.

Preliminary Results of Arthroscopic Superior Capsule Reconstruction with Dermal Allograft.

PURPOSE: The purpose of this study was to evaluate the short-term outcomes of arthroscopic superior capsule reconstruction (SCR) with dermal allograft for the treatment of irreparable massive rotator cuff tears (MRCTs). METHODS: A multicenter study was performed on patients undergoing arthroscopic SCR for irreparable MRCTs. The minimum follow-up was 1 year. Range of motion and functional outcome according to visual analog scale (VAS) pain, American Shoulder and Elbow Surgeons (ASES) score, and subjective shoulder value (SSV) score were assessed preoperatively and at final follow-up. Radiographs were used to evaluate the acromiohumeral interval (AHI). RESULTS: Fifty-nine patients with a mean age of 62.0 years had a minimum follow-up of 1 year. Twenty-five patients (42.4%) had a prior rotator cuff repair. Forward flexion improved from 130° preoperative to 158° postoperative, and external rotation improved from 36° to 45°, respectively (P < .001). Compared with preoperative values, the VAS decreased from 5.8 to 1.7, the ASES score improved from 43.6 to 77.5, and the SSV score improved from 35.0 to 76.3 (P < .001). The AHI was 6.6 mm at baseline and improved to 7.6 mm at 2 weeks postoperatively but decreased to 6.7 mm at final follow-up. Based on postoperative magnetic resonance imaging, 45% (9 of 20) of the grafts demonstrated complete healing. Forty-six (74.6%) cases were considered a success. Eleven patients (18.6%) underwent a revision procedure including 7 reverse shoulder arthroplasties. CONCLUSIONS: Arthroscopic SCR using dermal allograft provides a successful outcome in approximately 70% of cases in an initial experience. The preliminary results are encouraging in this difficult to manage patient population, but precise indications are important and graft healing is low in our initial experience. LEVEL OF EVIDENCE: Level IV, case series.

Lack of level I evidence on how to prevent infection after elective shoulder surgery.

PURPOSE: Infection is a concern after all orthopedic procedures, including shoulder surgery. This systematic review of literature aimed to determine risk factors for infection as well as the availability and effectiveness of measures utilized to prevent infection after elective shoulder surgery. METHODS: An electronic database search was performed using MEDLINE (1950-October 2017), EMBASE (1980-October 2017), CINAHL (1982-October 2017), and the Cochrane database to identify studies reporting a risk factor or preventive measure for infection after shoulder surgery. RESULTS: Fifty-one studies were eligible for inclusion. Risk factors identified for infection were male sex, the presence of hair, receiving an intra-articular cortisone injection within the 3 months prior to surgery, smoking, obesity, and several comorbidities. The only preventive measure with level I evidence was for the use of chlorhexidine wipes for cleansing the skin in the days prior to surgery and for the use of ChloraPrep or DuraPrep over povodine and iodine to prep the skin at the time of surgery. Level II-IV evidence was found for other infection prevention methods such as intravenous antibiotic prophylaxis. CONCLUSION: There are many risk factors associated with developing an infection after elective shoulder surgery. Many preventive measures have been described which may decrease the risk of infection; however, most lack a high level evidence to support them. The findings of this systematic review are clinically relevant as it has been shown that infection after shoulder surgery results in poor patient-reported outcomes and pose a significant financial burden. As surgeons the goal should be to prevent infections to avoid the morbidity for patients and the increased cost for society. LEVEL OF EVIDENCE: IV systematic review of literature.

Quantitative and Computed Tomography Anatomic Analysis of Glenoid Fixation for Superior Capsule Reconstruction: A Cadaveric Study.

PURPOSE: To investigate glenoid fixation for superior capsule reconstruction (SCR) and evaluate anchor positions, intraosseous trajectories, and proximity to the suprascapular nerve (SSN) and glenoid fossa. The secondary purpose was to provide technical pearls and pitfalls for anchor insertion on the superior glenoid during SCR. METHODS: Three beath pins were arthroscopically inserted into 12 (n = 12) nonpaired human cadaveric shoulders through Neviaser, anterior, and posterior portals to simulate anchor placement on the superior glenoid during SCR. Computed tomography scans were performed to evaluate anchor positioning and insertion trajectories. Specimens were then dissected to delineate the anatomic relations of the beath pins to the SSN and glenoid fossa. RESULTS: The superior glenoid anchor position was a mean 15.0 ± 4.0 mm to the SSN and 6.5 ± 1.7 mm to the glenoid fossa. The posterior glenoid anchor position was a mean 11.8 ± 2.1 mm to the SSN and 2.9 ± 2.9 mm to the glenoid fossa. On average, the superior pin was placed at 12:30 ± 0:30 (left-sided glenoid clock face) and inserted at 19° ± 9° with respect to the sagittal plane of the glenoid, the anterior pin was placed at 11:00 ± 0:30 and inserted 40° ± 17° off the glenoid, and the posterior pin was placed at 3:00 ± 1:00 and inserted at 52° ± 12° off the glenoid. CONCLUSIONS: The results of the present cadaveric study showed that glenoid fixation was safe with respect to the SSN and delineated technical guidelines and trajectories for inserting 3 anchors into the glenoid. CLINICAL RELEVANCE: This study shows that 3 anchors can be inserted into the glenoid without a risk of SSN damage and delineates technical guidelines for anchor insertion.

The anterior borders of the clavicle and the acromion are not always aligned in the intact acromioclavicular joint: a cadaveric study.

BACKGROUND: The aim of this study was to find reliable anatomic landmarks of the normal acromioclavicular joint (ACJ) that could enable the precise evaluation of the horizontal displacement of the clavicle after dislocation. The hypothesis was that the anterior borders of the acromion and the clavicle are always aligned in intact ACJs. MATERIALS AND METHODS: In 30 cadaveric specimens, the anterior and posterior borders of the ACJ's articular facets and the most prominent anterior and posterior bony landmarks of the acromion and the clavicle were identified. The anterior and posterior overhang of the acromion and the clavicle was measured in relation to the borders of the articular facets. Therefore, the possible anterior and posterior alignment of the ACJ was evaluated. RESULTS: Anteriorly, only 18 ACJs (60%) were aligned whereas 7 (24%) had major overhang of the acromion and 3 (10%) had major overhang of the clavicle. Similarly, 18 cases (60%) were posteriorly aligned, whereas 6 (20%) had major clavicular overhang and 4 (14%) had major overhang of the acromion. In 78% of these cases, the ACJ was aligned as well anteriorly as posteriorly (P < .001). Finally, the larger the width of the acromion (P = .032) or the clavicle (P = .049), the better the posterior joint alignment. CONCLUSION: Our hypothesis was not verified. The acromion and clavicle are not perfectly aligned in a significant number of specimens with intact ACJs (40% of cases). The most reliable landmarks remain their articular facets.

The Rotator Cuff and the Superior Capsule: Why We Need Both.

Tears of the rotator cuff are frequent. An estimated 250,000 to 500,000 repairs are performed annually in the United States. Rotator cuff repairs have been successful despite fatty infiltration and atrophy of the rotator cuff muscles. Although the emphasis in rotator cuff repair has historically focused on re-establishing the tendon attachment, there is growing interest in and understanding of the role of the superior capsule. The superior capsule is attached to the undersurface of the supraspinatus and infraspinatus muscle-tendon units, and it resists superior translation of the humeral head. Herein, we propose that it is the defect in the superior capsule that is the "essential lesion" in a superior rotator cuff tear, as opposed to the defect in the rotator cuff itself. We propose that rotator cuff repair must restore the normal capsular anatomy to provide normal biomechanics of the joint and thus a positive clinical outcome.

Arthroscopic proximal biceps tenodesis at the articular margin: evaluation of outcomes, complications, and revision rate.

PURPOSE: The purpose of this study was to evaluate the incidence of residual pain, outcomes, and the revision rate of arthroscopic proximal biceps tenodesis high in the groove at the articular margin of the humeral head by interference screw fixation. METHODS: Seven surgeons pooled data on patients who underwent an arthroscopic biceps tenodesis at the articular margin by interference screw fixation. All patients had a minimum of 50 weeks' follow-up. Preoperative and postoperative patient data including visual analog scale scores (obtained by all surgeons), objective shoulder scores (Simple Shoulder Test and University of California, Los Angeles scores obtained by 2 and 4 surgeons, respectively), and need for revision surgery (obtained by all surgeons) were retrospectively analyzed, the results are reported, and statistical analysis was performed. RESULTS: After the application of our exclusion criteria, 1,083 patients were included in the analysis. The mean follow-up period was 136 weeks. The overall revision surgery rate for this group was 4.1% (44 of 1,083). Revision for biceps tenodesis-related issues was needed in only 4 cases (for a biceps tenodesis-related revision rate of 0.4%). Pain scores improved from 6.47 preoperatively to 1.08 postoperatively (P < .0001). University of California, Los Angeles scores improved from 14.9 preoperatively to 30.1 postoperatively (P < .0001), and Simple Shoulder Test scores improved from 2.7 preoperatively to 10.2 postoperatively (P < .0001). CONCLUSIONS: Arthroscopic biceps tenodesis performed at the articular margin results in a low surgical revision rate, a low rate of residual pain, and significant improvement in objective shoulder outcome scores. LEVEL OF EVIDENCE: Level IV, therapeutic case series.

Associated lesions requiring additional surgical treatment in grade 3 acromioclavicular joint dislocations.

PURPOSE: To evaluate the incidence of associated pathologic shoulder lesions that were addressed surgically in grade 3 acromioclavicular joint (ACJ) dislocations, as well as to compare this incidence between younger and older patients and between acute and chronic cases. METHODS: In this multicenter nonrandomized retrospective study, 98 patients operated on for grade 3 ACJ dislocation underwent concomitant arthroscopic evaluation for the identification and treatment of any associated lesions. The type and treatment of associated lesions were collected in a central database and analyzed. We classified patients according to age (<45 years and ≥ 45 years) and according to the length of time between trauma and surgical treatment (≤ 30 days and ≥ 120 days), obtaining the following stratification: younger acute, older acute, younger chronic, and older chronic. RESULTS: Of the patients, 42 (42.8%) were diagnosed with at least 1 additional pathologic lesion, and 29 (29.5%) required a dedicated additional treatment. Rates of treatment on associated lesions were analyzed: younger versus older groups presented a significant difference, as did younger acute versus older acute groups; SLAP and posterior rotator cuff tear treatments represented 24 of the 35 additional surgeries (68.5%). CONCLUSIONS: The overall rate of associated pathologic lesions requiring additional surgical treatment in patients with ACJ dislocation was 29.5%. Patients aged 45 years or older had a greater risk of presenting with associated lesions that needed to be surgically addressed (odds ratio, 3.01). The overall rates of associated surgical lesions in acute versus chronic cases were not shown to be significantly different. LEVEL OF EVIDENCE: Level IV, prognostic case series.

Preoperative handgrip strength can predict early postoperative shoulder function in patients undergoing arthroscopic rotator cuff repair.

BACKGROUND: Rotator cuff tears (RCTs) are a common musculoskeletal disorder, and arthroscopic rotator cuff repair (ARCR) is widely performed for tendon repair. Handgrip strength correlates with rotator cuff function; however, whether preoperative grip strength can predict functional outcomes in patients undergoing ARCR remains unknown. This study aimed to investigate the correlation between preoperative grip strength and postoperative shoulder function following ARCR. METHODS: A total of 52 patients with full-thickness repairable RCTs were prospectively enrolled. Baseline parameters, namely patient characteristics and intraoperative findings, were included for analysis. Postoperative shoulder functional outcomes were assessed using the Quick Disabilities of the Arm, Shoulder, and Hand (QDASH) questionnaire and Constant-Murley scores (CMSs). Patients were followed up and evaluated at three and six months after ARCR. The effects of baseline parameters on postoperative outcomes were measured using generalized estimating equations. RESULTS: At three and six months postoperatively, all clinical outcomes evaluated exhibited significant improvement from baseline following ARCR. Within 6 months postoperatively, higher preoperative grip strength was significantly correlated with higher CMSs (ß = 0.470, p = 0.022), whereas increased numbers of total suture anchors were significantly correlated with decreased CMSs (ß = - 4.361, p = 0.03). Higher body mass index was significantly correlated with higher postoperative QDASH scores (ß = 1.561, p = 0.03) during follow-up. CONCLUSIONS: Higher baseline grip strength predicts more favorable postoperative shoulder function following ARCR. A preoperative grip strength test in orthopedic clinics may serve as a predictor for postoperative shoulder functional recovery in patients undergoing ARCR.

A systematic approach for diagnosing subscapularis tendon tears with preoperative magnetic resonance imaging scans.

PURPOSE: To determine and propose a systematic approach to evaluating magnetic resonance imaging (MRI) scans for subscapularis tears and compares preoperative MRI interpretations with findings of the same shoulders at arthroscopy. METHODS: The study was composed of 202 patients who underwent shoulder arthroscopy by 1 of 5 orthopaedic surgeons during a 3-month period. All patients had MRI scans performed within 6 months before arthroscopy. RESULTS: Of the 202 patients, 82 had subscapularis tendon tears confirmed at the time of arthroscopy. The orthopaedic surgeons correctly diagnosed 60 of 82 patients (73%) with subscapularis tendon tears on preoperative MRI that were subsequently identified by arthroscopy. The orthopaedic surgeons correctly diagnosed 113 of 120 patients (94%) as not having subscapularis tendon tears. This resulted in an overall sensitivity of 73%, specificity of 94%, positive predictive value of 90%, negative predictive value of 84%, and accuracy of 86%. The frequency of subscapularis tears was highest when the long head of the biceps was displaced from the groove (88%), a combined supraspinatus/infraspinatus tear existed (71%), or the long head of the biceps tendon was torn (69%). CONCLUSIONS: Preoperative MRI scans of the shoulder interpreted by orthopaedic surgeons with the described systematic approach resulted in improved accuracy in diagnosing subscapularis tendon tears compared with previous studies. A consistent finding is that larger subscapularis tendon tears are more easily detected using MRI scans whereas smaller tears are more frequently missed. LEVEL OF EVIDENCE: Level III, development of diagnostic criteria with universally applied reference (nonconsecutive patients).

A Technique for a Suture-Based Cable Reconstruction of an Irreparable Posterosuperior Rotator Cuff Tear.

The management of irreparable rotator cuff tears remains challenging. In patients in whom a complete repair cannot be obtained, a partial repair remains an option. The goal of a partial rotator cuff repair is to obtain a stable glenohumeral joint fulcrum by restoring the rotator cable complex. Traditionally, partial repair has been performed with independent reattachment(s) of the rotator cable complex with or without margin convergence medially. This Technical Note describes an alternative approach to a partial rotator cuff repair with a suture-based cable reconstruction.

Addition of Allograft and Acromioclavicular Cerclage Improves Outcomes of Arthroscopic-Assisted Reconstruction of Acromioclavicular Separation With a Single Coracoclavicular Tunnel.

Objective The purpose of this study was to prospectively evaluate the functional outcome and complications of unstable acromioclavicular (AC) joint separations repaired with a single coracoclavicular tunnel utilizing an arthroscopic-assisted curved button technique. Methods Thirty-five patients with a minimum of 12 months follow-up underwent arthroscopic-assisted AC joint reconstruction with suspensory button and 2 mm suture tape fixation using 3 mm tunnels. Functional outcome scores were analyzed preoperatively and at final follow-up with all complications noted. Results Comparing preoperative to postoperative values, all functional outcome scores improved. Three of the 16 (19%) patients that had a supplementary graft looped around the undersurface of the coracoid demonstrated loss of reduction compared to eight of the 19 (42%) that were treated with button and suture fixation alone (p = .138). No loss of reduction occurred in the subset of patients with AC joint supplementation. One (3%) patient sustained a distal clavicle fracture. Conclusion Arthroscopic-assisted AC joint reconstruction with a suspensory button construct demonstrates improved clinical outcomes with high patient satisfaction. While loss reduction remains problematic, smaller bone tunnels appear to lead to a low rate of iatrogenic fractures. The addition of a free tendon graft, as well as AC cerclage, appears to minimize loss of reduction.

A Tensionable Suture-based Cerclage Is an Alternative to Stainless Steel Cerclage Fixation for Stabilization of a Humeral Osteotomy During Shoulder Arthroplasty.

INTRODUCTION: Fixation of periprosthetic humeral fractures is most commonly obtained with steel-based wires or cables; however, disadvantages with these constructs are numerous. Suture-based cerclages offer the advantage of easy handling, less radiographic interference, and risk of metallosis, as well as decreased risk of cutting into the soft humeral bone. Therefore, the purpose of this study was to compare a suture-based cerclage to a stainless steel wire cerclage (SSWC) for stabilization of the humerus during shoulder arthroplasty. METHODS: In part I of the study, SSWC fixation was compared with single-looped tape cerclage and a double-looped tape cerclage (DLTC) fixation. In part II, a subsidence test was performed on 12 cadaveric humeri. After an osteotomy, the humeri were secured with either a SSWC or DLTC. Subsequently, a metal wedge was introduced into the humerus to simulate the stem of a shoulder arthroplasty. RESULTS: In part I, load to 2-mm displacement was significantly higher for the DLTC construct compared with the SSWC construct (2,401 ± 483 N versus 750 ± 33 N; P < 0.0001). Load to failure was 935 ± 143 N with the SSWC, 1,737 ± 113 N with the single-looped tape cerclage, and 4,360 ± 463 N with the DLTC constructs, and all differences were statistically significant (P < 0.05). In part II, load at 20-mm subsidence was higher for the DLTC (320 ± 274 N) compared with the SSWC (247 ± 137 N), but no significant difference was observed (P > 0.05). However, gap displacement at 20 mm subsidence was significantly lower with the DLTC construct (0.33 ± 0.31 mm versus 0.77 ± 0.23 mm; P = 0.009). Load to failure was higher with the DLTC construct compared with the SSWC construct (4,447 ± 2,325 N versus 1,880 ± 1,089 N; P = 0.032), but the final gap displacement did not differ significantly (DLTC 5.23 ± 6.63 mm versus SSWC 6.03 ± 8.82 mm; P > 0.05). DISCUSSION: A DLTC has higher load to failure and trends toward lower gap displacement compared with a SSWC. The DLTC construct may therefore be a viable alternative for fixation of periprosthetic fractures or osteotomies of the humeral shaft during shoulder arthroplasty.

Accuracy of preoperative magnetic resonance imaging in predicting a subscapularis tendon tear based on arthroscopy.

PURPOSE: The purpose of this study was to evaluate the diagnostic accuracy of magnetic resonance imaging (MRI) scan assessments of subscapularis tendon tears by comparing the preoperative MRI interpretations of radiologists with the actual results determined by arthroscopic evaluations of the same shoulders. METHODS: This retrospective review comprised all 120 patients who underwent primary arthroscopic rotator cuff repairs performed by the senior author during 2006. Of the 120 patients, 90 had high-field strength, conventional MRI scans performed within 190 days before their arthroscopic procedures. RESULTS: All 16 patients with preoperative MRI scans that were interpreted by the radiologists as positive for subscapularis tendon tears were confirmed to be positive by arthroscopy, resulting in perfect specificity. However, the radiologists diagnosed only 16 of 44 subscapularis tears (36%) identified by arthroscopy. This resulted in an overall sensitivity of 36%, specificity of 100%, positive predictive value of 100%, negative predictive value of 62%, and accuracy of 69%. CONCLUSIONS: Preoperative MRI scans of the shoulder do not reliably predict which rotator cuff injury patients have subscapularis tendon tears. Subscapularis tendon tears that extend at least half the cephalad-to-caudal distance are more easily detected by MRI scans, whereas smaller tears are usually missed on MRI scans. LEVEL OF EVIDENCE: Level III, development of diagnostic criteria with universally applied reference (nonconsecutive patients).

Arthroscopic Superior Capsular Reconstruction for Treatment of Massive Irreparable Rotator Cuff Tears: An Update of the Technique for 2020.

The treatment of massive, irreparable rotator cuff tears presents a substantial challenge to health-care professionals. Treatment options range from nonoperative to operative, including debridement, partial repair, biceps tenotomy, bridging patch grafts, muscle transfers, and reverse total shoulder arthroplasty. However, the results of such treatments are often mixed, and many carry a substantial risk of complications. Superior capsular reconstruction has been described as a surgical alternative to the aforementioned procedures. Superior capsular reconstruction is a technique that provides an anatomic reconstruction of the superior capsule of the glenohumeral joint, with the goal of restoring the normal restraint to superior translation that is lost with a deficient superior rotator cuff. The technique described in the present article highlights the pearls and pitfalls learned over the last several years of performing arthroscopic reconstruction of the superior capsule with dermal allograft.

Graft Tensioning in Superior Capsular Reconstruction Improves Glenohumeral Joint Kinematics in Massive Irreparable Rotator Cuff Tears: A Biomechanical Study of the Influence of Superior Capsular Reconstruction on Dynamic Shoulder Abduction.

BACKGROUND: Superior capsular reconstruction (SCR) for massive, irreparable rotator cuff tears has become more widely used recently; however, ideal tensioning of the graft and the influence on joint kinematics remain unknown. PURPOSE/HYPOTHESIS: The purpose of this study was to assess the effects of graft tensioning on glenohumeral joint kinematics after SCR using a dermal allograft. The hypothesis was that a graft fixed under tension would result in increased glenohumeral abduction motion and decreased cumulative deltoid forces compared with a nontensioned graft. STUDY DESIGN: Controlled laboratory study. METHODS: A total of 10 fresh-frozen cadaveric shoulders were tested using a dynamic shoulder simulator. Each shoulder underwent the following 4 conditions: (1) native, (2) simulated irreparable supraspinatus (SSP) tear, (3) SCR using a nontensioned acellular dermal allograft, and (4) SCR using a graft tensioned with 30 to 35 N. Mean values for maximum glenohumeral abduction and cumulative deltoid forces were recorded. The critical shoulder angle (CSA) was also assessed. RESULTS: Native shoulders required a mean (±SE) deltoid force of 193.2 ± 45.1 N to achieve maximum glenohumeral abduction (79.8° ± 5.8°). Compared with native shoulders, abduction decreased after SSP tears by 32% (54.3° ± 13.7°; P = .04), whereas cumulative deltoid forces increased by 23% (252.1 ± 68.3 N; P = .04). The nontensioned SCR showed no significant difference in shoulder abduction (54.1° ± 16.1°) and required deltoid forces (277.8 ± 39.8 N) when compared with the SSP tear state. In contrast, a tensioned graft led to significantly improved shoulder abduction compared with the SSP tear state (P = .04) although abduction and deltoid forces could not be restored to the native state (P = .01). A positive correlation between CSA and maximum abduction was found for the tensioned-graft SCR state (r = 0.685; P = .02). CONCLUSION: SCR using a graft fixed under tension demonstrated a significant increase in maximum shoulder abduction compared with a nontensioned graft; however, abduction remained significantly less than the intact state. The nontensioned SCR showed no significant improvement in glenohumeral kinematics compared with the SSP tear state. CLINICAL RELEVANCE: Because significant improvement in shoulder function after SCR may be expected only when the graft is adequately tensioned, accurate graft measurement and adequate tension of at least 30 N should be considered during the surgical procedure. SCR with a tensioned graft may help maintain sufficient acromiohumeral distance, improve clinical outcomes, and reduce postoperative complications.