Immunomodulatory fibrous hyaluronic acid-Fmoc-diphenylalanine-based hydrogel induces bone regeneration.

AIM: To investigate the potential of an ultrashort aromatic peptide hydrogelator integrated with hyaluronic acid (HA) to serve as a scaffold for bone regeneration. MATERIALS AND METHODS: Fluorenylmethyloxycarbonyl-diphenylalanine (FmocFF)/HA hydrogel was prepared and characterized using microscopy and rheology. Osteogenic differentiation of MC3T3-E1 preosteoblasts was investigated using Alizarin red, alkaline phosphatase and calcium deposition assays. In vivo, 5-mm-diameter calvarial critical-sized defects were prepared in 20 Sprague-Dawley rats and filled with either FmocFF/HA hydrogel, deproteinized bovine bone mineral, FmocFF/Alginate hydrogel or left unfilled. Eight weeks after implantation, histology and micro-computed tomography analyses were performed. Immunohistochemistry was performed in six rats to assess the hydrogel's immunomodulatory effect. RESULTS: A nanofibrous FmocFF/HA hydrogel with a high storage modulus of 46 KPa was prepared. It supported osteogenic differentiation of MC3T3-E1 preosteoblasts and facilitated calcium deposition. In vivo, the hydrogel implantation resulted in approximately 93% bone restoration. It induced bone deposition not only around the margins, but also generated bony islets along the defect. Elongated M2 macrophages lining at the periosteum-hydrogel interface were observed 1 week after implantation. After 3 weeks, these macrophages were dispersed through the regenerating tissue surrounding the newly formed bone. CONCLUSIONS: FmocFF/HA hydrogel can serve as a cell-free, biomimetic, immunomodulatory scaffold for bone regeneration.

Exploiting Minimalistic Backbone Engineered γ-Phenylalanine for the Formation of Supramolecular Co-Polymer.

Ordered supramolecular hydrogels assembled by modified aromatic amino acids often exhibit low mechanical rigidity. Aiming to stabilize the hydrogel and understand the impact of conformational freedom and hydrophobicity on the self-assembly process, two building blocks based on 9-fluorenyl-methoxycarbonyl-phenylalanine (Fmoc-Phe) gelator which contain two extra methylene units in the backbone, generating Fmoc-γPhe and Fmoc-(3-hydroxy)-γPhe are designed. Fmoc-γPhe spontaneously assembled in aqueous media forming a hydrogel with exceptional mechanical and thermal stability. Moreover, Fmoc-(3-hydroxy)-γPhe, with an extra backbone hydroxyl group decreasing its hydrophobicity while maintaining some molecular flexibility, self-assembled into a transient fibrillar hydrogel, that later formed microcrystalline aggregates through a phase transition. Molecular dynamics simulations and single crystal X-ray analyses reveal the mechanism underlying the two residues' distinct self-assembly behaviors. Finally, Fmoc-γPhe and Fmoc-(3-OH)-γPhe co-assembly to form a supramolecular hydrogel with notable mechanical properties are demonstrated. It has been believed that the understanding of the structure-assembly relationship will enable the design of new functional amino acid-based hydrogels.

Hyaluronic Acid and a Short Peptide Improve the Performance of a PCL Electrospun Fibrous Scaffold Designed for Bone Tissue Engineering Applications.

Bone tissue engineering is a rapidly developing, minimally invasive technique for regenerating lost bone with the aid of biomaterial scaffolds that mimic the structure and function of the extracellular matrix (ECM). Recently, scaffolds made of electrospun fibers have aroused interest due to their similarity to the ECM, and high porosity. Hyaluronic acid (HA) is an abundant component of the ECM and an attractive material for use in regenerative medicine; however, its processability by electrospinning is poor, and it must be used in combination with another polymer. Here, we used electrospinning to fabricate a composite scaffold with a core/shell morphology composed of polycaprolactone (PCL) polymer and HA and incorporating a short self-assembling peptide. The peptide includes the arginine-glycine-aspartic acid (RGD) motif and supports cellular attachment based on molecular recognition. Electron microscopy imaging demonstrated that the fibrous network of the scaffold resembles the ECM structure. In vitro biocompatibility assays revealed that MC3T3-E1 preosteoblasts adhered well to the scaffold and proliferated, with significant osteogenic differentiation and calcium mineralization. Our work emphasizes the potential of this multi-component approach by which electrospinning, molecular self-assembly, and molecular recognition motifs are combined, to generate a leading candidate to serve as a scaffold for bone tissue engineering.

Modification of a Single Atom Affects the Physical Properties of Double Fluorinated Fmoc-Phe Derivatives.

Supramolecular hydrogels formed by the self-assembly of amino-acid based gelators are receiving increasing attention from the fields of biomedicine and material science. Self-assembled systems exhibit well-ordered functional architectures and unique physicochemical properties. However, the control over the kinetics and mechanical properties of the end-products remains puzzling. A minimal alteration of the chemical environment could cause a significant impact. In this context, we report the effects of modifying the position of a single atom on the properties and kinetics of the self-assembly process. A combination of experimental and computational methods, used to investigate double-fluorinated Fmoc-Phe derivatives, Fmoc-3,4F-Phe and Fmoc-3,5F-Phe, reveals the unique effects of modifying the position of a single fluorine on the self-assembly process, and the physical properties of the product. The presence of significant physical and morphological differences between the two derivatives was verified by molecular-dynamics simulations. Analysis of the spontaneous phase-transition of both building blocks, as well as crystal X-ray diffraction to determine the molecular structure of Fmoc-3,4F-Phe, are in good agreement with known changes in the Phe fluorination pattern and highlight the effect of a single atom position on the self-assembly process. These findings prove that fluorination is an effective strategy to influence supramolecular organization on the nanoscale. Moreover, we believe that a deep understanding of the self-assembly process may provide fundamental insights that will facilitate the development of optimal amino-acid-based low-molecular-weight hydrogelators for a wide range of applications.

Mechanical Enhancement and Kinetics Regulation of Fmoc-Diphenylalanine Hydrogels by Thioflavin†T.

The self-assembly of peptides is a key direction for fabrication of advanced materials. Novel approaches for fine tuning of macroscopic and microscopic properties of peptide self-assemblies are of a high demand for constructing biomaterials with desired properties. In this work, while studying the kinetics of the Fmoc-Diphenylalanine (Fmoc-FF) dipeptide self-assembly using the Thioflavin T (ThT) dye, we observed that the presence of ThT strongly modifies structural and mechanical properties of the Fmoc-FF hydrogel. Notably, the presence of ThT resulted in a tenfold increase of the gelation time and in the formation of short and dense fibers in the hydrogel. As a result of these morphological alteration higher thermal stability, and most important, tenfold increase of the hydrogel rigidity was achieved. Hence, ThT not only slowed the kinetics of the Fmoc-FF hydrogel formation, but also strongly enhanced its mechanical properties. In this study, we provide a detailed description of the ThT effect on the hydrogel properties and suggest the mechanisms for this phenomenon, paving the way for the novel approach to the control of the peptide hydrogels' micro- and macroscale properties.

Formation of peptide-based oligomers in dimethylsulfoxide: identifying the precursor of fibril formation.

The well-studied dipeptide fluorenylmethyloxycarbonyl-di-phenylalanine (FmocFF) forms a rigid hydrogel upon dissolving in dimethylsulfoxide (DMSO) and dilution in H2O. Here, we explored the pre-aggregation of the peptide in pure DMSO by vibrational spectroscopies, X-ray powder diffraction and dynamic light scattering. Our results show an equilibrium between a dominant population of amorphous oligomers (on a length scale of 2 nm) and a small number of protofibrils/fibrils (on a length scale of 30 nm in the centimolar and of 200 nm in the sub-molar region). To probe the mechanism underlying the formation of these protofilaments, we measured the 1H-NMR, IR and visible Raman spectra of DMSO containing different FmocFF concentrations, ranging between 10 and 300 mM. Our data reveal that interpeptide hydrogen bonding leads to the self-assembly of FmocFF in the centimolar region, while π-π stacking between Fmoc-groups is observed above 100 mM. The high 3J(HNHCα) coupling constant of the N-terminal amide proton indicates that the Fmoc end-cap of the peptide locks the N-terminal residue into a conformational ensemble centered at a φ-value of ca. -120°, which corresponds to a parallel ß-sheet type conformation. The 3J(HNHCα) coupling constant of the C-terminal residue is indicative of a polyproline II (pPII)/ßt mixture. Our results suggest that the gelation of FmocFF caused by the addition of a small amount of water to DMSO mixtures is facilitated by the formation of disordered protofibrils in pure DMSO.

Bi-functional peptide-based 3D hydrogel-scaffolds.

Over the last few years, hydrogels have been proposed for many biomedical applications, including drug delivery systems and scaffolds for tissue engineering. In particular, peptides have been envisioned as excellent candidates for the development of hydrogel materials, due to their intrinsic biocompatibility, ease of handling, and intrinsic biodegradability. Recently, we developed a novel hybrid polymer-peptide conjugate, PEG8-(FY)3, which is able to self-assemble into a self-supporting soft hydrogel over dry and wet surfaces as demonstrated by molecular dynamics simulation. Here, we describe the synthesis and supramolecular organization of six novel hexapeptides rationally designed by punctual chemical modification of the primary peptide sequence of the ancestor peptide (FY)3. Non-coded amino acids were incorporated by replacing the phenylalanine residue with naphthylalanine (Nal) and tyrosine with dopamine (Dopa). We also studied the effect of the modification of the side chain and the corresponding PEGylated peptide analogues, on the structural and mechanical properties of the hydrogel. Secondary structure, morphology and rheological properties of all the peptide-based materials were assessed by various biophysical tools. The in vitro biocompatibility of the supramolecular nanostructures was also evaluated on fibroblast cell lines. We conclude that the PEG8-(Nal-Dopa)3 hydrogel possesses the right properties to serve as a scaffold and support cell growth.

Surface Modification by Nano-Structures Reduces Viable Bacterial Biofilm in Aerobic and Anaerobic Environments.

Bacterial biofilm formation on wet surfaces represents a significant problem in medicine and environmental sciences. One of the strategies to prevent or eliminate surface adhesion of organisms is surface modification and coating. However, the current coating technologies possess several drawbacks, including limited durability, low biocompatibility and high cost. Here, we present a simple antibacterial modification of titanium, mica and glass surfaces using self-assembling nano-structures. We have designed two different nano-structure coatings composed of fluorinated phenylalanine via the drop-cast coating technique. We investigated and characterized the modified surfaces by scanning electron microscopy, X-ray diffraction and wettability analyses. Exploiting the antimicrobial property of the nano-structures, we successfully hindered the viability of Streptococcus mutans and Enterococcus faecalis on the coated surfaces in both aerobic and anaerobic conditions. Notably, we found lower bacteria adherence to the coated surfaces and a reduction of 86-99% in the total metabolic activity of the bacteria. Our results emphasize the interplay between self-assembly and antimicrobial activity of small self-assembling molecules, thus highlighting a new approach of biofilm control for implementation in biomedicine and other fields.

Transition of Metastable Cross-α Crystals into Cross-ß Fibrils by ß-Turn Flipping.

The ensemble of native, folded state was once considered to represent the global energy minimum of a given protein sequence. More recently, the discovery of the cross-ß amyloid state revealed that deeper energy minima exist, often associated with pathogenic, fibrillar deposits, when the concentration of proteins reaches a critical value. Fortunately, a sizable energy barrier impedes the conversion from native to pathogenic states. However, little is known about the structure of the related transition state. In addition, there are indications of polymorphism in the amyloidogenic process. Here, we report the first evidence of the conversion of metastable cross-α-helical crystals to thermodynamically stable cross-ß-sheet-like fibrils by a de novo designed heptapeptide. Furthermore, for the first time, we demonstrate at atomic resolution that the flip of a peptide plane from a type I to a type II' turn facilitates transformation to cross-ß structure and assembly of a dry steric zipper. This study establishes the potential of a peptide turn, a common protein secondary structure, to serve as a principal gatekeeper between a native metastable folded state and the amyloid state.

Fmoc-FF and hexapeptide-based multicomponent hydrogels as scaffold materials.

Short peptides or single amino acids are interesting building blocks for fabrication of hydrogels, frequently used as extracellular matrix-mimicking scaffolds for cell growth in tissue engineering. The combination of two or more peptide hydrogelators could allow obtaining different materials exhibiting new architectures, tunable mechanical properties, high stability and improved biofunctionality. Here we report on the synthesis, formulation and multi-scale characterization of peptide-based mixed hydrogels formed by the low molecular weight Fmoc-FF (Nα-fluorenylmethyloxycarbonyl diphenylalanine) hydrogelator and of the PEG8-(FY)3 hexapeptide, containing three repetitions of the Phe-Tyr motif and a PEG moiety at its N-terminus. Mixed hydrogels were also prepared by replacing PEG8-(FY)3 with its analogue (FY)3, without the PEG moiety. Rheology analysis confirmed the improved mechanical features of the multicomponent gels prepared at two different ratios (2/1 or 1/1, v/v). However, the presence of the hydrophilic PEG polymeric moiety causes a slowing down of the gel kinetic formation (from 42 to 18 minutes) and a decrease of the gel rigidity (G' from 9 to 6 kPa). Preliminary in vitro biocompatibility and cell adhesion assays performed on Chinese hamster ovarian (CHO) cells suggest a potential employment of these multicomponent hydrogels as exogenous scaffold materials for tissue engineering.

Composite of Peptide-Supramolecular Polymer and Covalent Polymer Comprises a New Multifunctional, Bio-Inspired Soft Material.

Peptide-based supramolecular hydrogels are utilized as functional materials in tissue engineering, axonal regeneration, and controlled drug delivery. The Arg-Gly-Asp (RGD) ligand based supramolecular gels have immense potential in this respect, as this tripeptide is known to promote cell adhesion. Although several RGD-based supramolecular hydrogels have been reported, most of them are devoid of adequate resilience and long-range stability for in vitro cell culture. In a quest to improve the mechanical properties of these tripeptide-based gels and their durability in cell culture media, the Fmoc-RGD hydrogelator is non-covalently functionalized with a biocompatible and biodegradable polymer, chitosan, resulting in a composite hydrogel with enhanced gelation rate, mechanical properties and cell media durability. Interestingly, both Fmoc-RGD and Fmoc-RGD/chitosan composite hydrogels exhibit thixotropic properties. The utilization of the Fmoc-RGD/chitosan composite hydrogel as a scaffold for 2D and 3D cell cultures is demonstrated. The composite hydrogel is found to have notable antibacterial activity, which stems from the inherent antibacterial properties of chitosan. Furthermore, the composite hydrogels are able to produce ultra-small, mono-dispersed, silver nanoparticles (AgNPs) arranged on the fiber axis. Therefore, the authors' approach harnesses the attributes of both the supramolecular-polymer (Fmoc-RGD) and the covalent-polymer (chitosan) component, resulting in a composite hydrogel with excellent potential.

Bio Mimicking of Extracellular Matrix.

Biomaterials play a critical role in regenerative strategies such as stem cell-based therapies and tissue engineering, aiming to replace, remodel, regenerate, or support damaged tissues and organs. The design of appropriate three-dimensional (3D) scaffolds is crucial for generating bio-inspired replacement tissues. These scaffolds are primarily composed of degradable or non-degradable biomaterials and can be employed as cells, growth factors, or drug carriers. Naturally derived and synthetic biomaterials have been widely used for these purposes, but the ideal biomaterial remains to be found. Researchers from diversified fields have attempted to design and fabricate novel biomaterials, aiming to find novel theranostic approaches for tissue engineering and regenerative medicine. Since no single biomaterial has been found to possess all the necessary characteristics for an ideal performance, over the years scientists have tried to develop composite biomaterials that complement and combine the beneficial properties of multiple materials into a superior matrix. Herein, we highlight the structural features and performance of various biomaterials and their application in regenerative medicine and for enhanced tissue engineering approaches.

Amyloid-Like Fibrillary Morphology Originated by Tyrosine-Containing Aromatic Hexapeptides.

Phenylalanine-based nanostructures have attracted the attention of the material science community for their functional properties. These properties strongly depend on the hierarchic organization of the nanostructure that in turn can be finely tuned by punctual chemical modifications of the building blocks. Herein, we investigate how the partial or the complete replacement of the Phe residues in PEG8 -(Phe)6 (PEG8 -F6) with tyrosines to generate PEG8 -(Phe-Tyr)3 (PEG8 -(FY)3) or PEG8 -(Tyr)6 (PEG8 -Y6) affects the structural/functional properties of the nanomaterial formed by the parental compound. Moreover, the effect of the PEG derivatization was evaluated through the characterization of the peptides without the PEG moiety (Tyr)6 (Y6) and (Phe-Tyr)3 ((FY)3). Both PEG8 -Y6 and PEG8 -(FY)3 can self-assemble in water at micromolar concentrations in ß-sheet-rich nanostructures. However, WAXS diffraction patterns of these compounds present significant differences. PEG8 -(FY)3 shows a 2D WAXS oriented fiber diffraction profile characterized by the concomitant presence of a 4.7 Šmeridional and a 12.5 Šequatorial reflection that are generally associated with cross-ß structure. On the other hand, the pattern of PEG8 -Y6 is characterized by the presence of circles typically observed in the presence of PEG crystallization. Molecular modeling and dynamics provide an atomic structural model of the peptide spine of these compounds that is in good agreement with WAXS experimental data. Gelation phenomenon was only detected for PEG8 -(FY)3 above a concentration of 1.0 wt % as confirmed by storage (G'≈100 Pa) and loss (G''≈28 Pa) moduli in rheological studies. The cell viability on CHO cells of this soft hydrogel was certified to be 90 % after 24 hours of incubation.

Pillararene-Based Two-Component Thixotropic Supramolecular Organogels: Complementarity and Multivalency as Prominent Motifs.

Rationally designed two-component supramolecular organogels based on multiple chemical interactions between percarboxylato- and peramino-pillararenes are described. Mixing low concentration solutions (<1 % w/v) of decacarboxylato-pillar[5]arene (1) with decaamino-pillar[5]arenes (2 b-d) affords, rapidly and without heating, organogels displaying an exceptional combination of properties. These supramolecular organogels, the characteristics of which are tunable, were found to be thixotropic and thermally stable, with Tgel values in some cases exceeding the boiling point of the embedded solvent. It is demonstrated that both structural complementarity and multivalency are important determinants in the gelation process of these attractive soft materials.

UV Light-Responsive Peptide-Based Supramolecular Hydrogel for Controlled Drug Delivery.

Low-molecular-weight self-assembled peptides may serve as promising hydrogelators for drug delivery applications by changing their structural network in response to external stimuli. Herein, inspired by the well-studied low-molecular-weight peptide hydrogelator, fluorenyl-methoxycarbonyl-diphenylalanine (Fmoc-FF), a novel peptide is designed and synthesized to include an ultraviolet (UV)-sensitive phototrigger. Similar to Fmoc-FF, 6-nitroveratryloxycarbonyl-diphenylalanine (Nvoc-FF) self-assembles to form a 3D, self-supporting, nanofibrous hydrogel. The Nvoc-FF hydrogel exhibits good mechanical properties with a storage modulus of 40 kPa. UV irradiation of the Nvoc-FF hydrogel encapsulating insulin-fluorescein isothiocyanate (insulin-FITC) results in the cleavage of Nvoc-FF peptide to produce unmasked FF, thereby facilitating the degradation of the hydrogel and the release of insulin-FITC. This release is in linear correlation to the irradiation time. In the present study, a first insight into this rigid, fibrous, light-responsive hydrogel is provided, allowing the fabrication of a novel drug delivery system for controlled release of large molecules.

Arginine-Presenting Peptide Hydrogels Decorated with Hydroxyapatite as Biomimetic Scaffolds for Bone Regeneration.

Hydrogels are promising candidates for biomimetic scaffolds of the extracellular matrix in tissue engineering applications. However, their use in bone tissue engineering is limited due to their low mechanical properties. In this study, we designed and synthesized multicomponent peptide-based hydrogels composed of fluorenyl-9-methoxycarbonyl diphenylalanine (FmocFF), which contributed to the rigidity and stability of the hydrogel, and Fmoc-arginine (FmocR), which mediated high affinity to hydroxyapatite (HAP) due to the arginine moiety. The new hydrogels composed of nanometric fibril networks were decorated with HAP and demonstrated high mechanical strength with a storage modulus of up to 29 kPa. In addition, the hydrogels supported cell adhesion and in vitro cell viability. These properties suggest using these multicomponent organic-inorganic hydrogels as functional biomaterials for improved bone regeneration.

Fmoc-modified amino acids and short peptides: simple bio-inspired building blocks for the fabrication of functional materials.

Amino acids and short peptides modified with the 9-fluorenylmethyloxycarbonyl (Fmoc) group possess eminent self-assembly features and show distinct potential for applications due to the inherent hydrophobicity and aromaticity of the Fmoc moiety which can promote the association of building blocks. Given the extensive study and numerous publications in this field, it is necessary to summarize the recent progress concerning these important bio-inspired building blocks. Therefore, in this review, we explore the self-organization of this class of functional molecules from three aspects, i.e., Fmoc-modified individual amino acids, Fmoc-modified di- and tripeptides, and Fmoc-modified tetra- and pentapeptides. The relevant properties and applications related to cell cultivation, bio-templating, optical, drug delivery, catalytic, therapeutic and antibiotic properties are subsequently summarized. Finally, some existing questions impeding the development of Fmoc-modified simple biomolecules are discussed, and corresponding strategies and outlooks are suggested.

Disruption of diphenylalanine assembly by a Boc-modified variant.

Peptide-based biomaterials are key to the future of diagnostics and therapy, promoting applications such as tissue scaffolds and drug delivery vehicles. To realise the full potential of the peptide systems, control and optimisation of material properties are essential. Here we investigated the co-assembly of the minimal amyloid motif peptide, diphenylalanine (FF), and its tert-butoxycarbonyl (Boc)-modified derivative. Using Atomic Force Microscopy, we demonstrated that the co-assembled fibers are less rigid and show a curvier morphology. We propose that the Boc-modification of FF disrupts the hydrogen bond packing of adjacent N-termini, as supported by Fourier transform infrared and fluorescence spectroscopic data. Such rationally modified co-assemblies offer chemical functionality for after-assembly modification and controllable surface properties for tissue engineering scaffolds, along with tunable morphological vs. mechanical properties.

FtsZ Cytoskeletal Filaments as a Template for Metallic Nanowire Fabrication.

Supramolecular protein assemblies can serve as templates for the fabrication of inorganic nanowires due to their morphological reproducibility and innate proclivity to form well-ordered structures. Amongst the variety of naturally occurring nano-scale assemblies, cytoskeletal fibers from diverse biological sources represent a unique family of scaffolds for biomimetics as they efficiently self-assemble in vitro in a controllable manner to form stable filaments. Here, we harness the bacterial FtsZ filament system as a scaffold for protein-based metal nanowires, and further demonstrate the control of wire alignment with the use of an external magnetic field. Due to the ease at which the bacterial FtsZ is overexpressed and purified, as well as the extensive studies of its ultrastructural properties and physiological significance, FtsZ filaments are an ideal substrate for large-scale production and chemical manipulation. Using a biologically compatible electroless metal deposition technique initiated by adsorption of platinum as a surface catalyst, we demonstrate the coating of assembled FtsZ filaments with iron, nickel, gold, and copper to fabricate continuous nanowires with diameters ranging from 10-50 nm. Organic-inorganic hybrid wires were analyzed using high-resolution field-emission-gun transmission and scanning electron microscopy, and confirmed by energy-dispersive elemental analysis. We also achieved alignment of ferrofluid-coated FtsZ filaments using an external magnetic field. Overall, we provide evidence for the robustness of the FtsZ filament system as a molecular scaffold, and offer an efficient, biocompatible procedure for facile bottom-up assembly of metallic wires on biological templates. We believe that bottom-up fabrication methods as reported herein significantly contribute to the expanding toolkit available for the incorporation of biological materials in nano-scale devices for electronic and electromechanical applications.

The physical properties of supramolecular peptide assemblies: from building block association to technological applications.

Bio-inspired nano-materials can be formed by the ordered assembly of elementary building blocks using recognition modules and structural elements. Among the biological sources, peptides and proteins are of special interest due to their role as major structural elements in all living systems, ranging from bacteria to humans in a continuum of magnitudes, from the nano-scale to the macro-scale. Peptides, as short as dipeptides, contain all the molecular information needed to form well-ordered structures at the nano-scale. Here, in light of the significant advancements in the field of peptide nanostructures in the last few years, we provide an updated overview of this subject. The use of these nanostructures was indeed recently demonstrated in various fields including the design of molecular motors based on nanostructure complexation with a metal-organic framework, the delivery of therapeutic agents, the development of energy storage devices and the fabrication of piezoelectric-based sensors.