Effective removal of acetamiprid and eosin Y by adsorption on pristine and modified MIL-101(Fe).

In this work, the efficacy of two metal-organic frameworks (MIL-101(Fe) and NH2-MIL-101(Fe)) in eliminating acetamiprid (ATP) insecticide and eosin Y (EY) dye from aqueous solution is tested. An analysis was conducted on the developed nanocomposite's optical, morphological, and structural characteristics. The adsorption isotherm, kinetics, thermodynamics, reusability, and mechanisms for ATP and EY dye removal were assessed. NH2-MIL-101(Fe) adsorbed 76% and 90% of ATP pesticide and EY dye, respectively after 10 to 15 min in optimum conditions. For both adsorbents, with regard to explaining the isotherm data, the Langmuir model offered the most accurate description. Moreover, the adsorption of ATP and EY dye is described by the pseudo-second-order kinetic model. The maximum adsorption capacities of ATP and EY dye on MIL-101(Fe) were 57.6 and 48.9 mg/g compared to 70.5 and 97.8 mg/g using NH2-MIL-101(Fe). The greatest amount of ATP and EY dye clearance was obtained at a neutral medium for both adsorbents. The results of this investigation demonstrate the effectiveness of MIL-101(Fe) and NH2-MIL-101(Fe) as effective substances in the adsorption process for removing pesticides and dyes from aqueous solution.

Introduction to the Young African Researchers collection.

Abisola O. Egbedina, Jairus L. Lamola, Mina Shawky Adly, and Stephen O. Ojwach introduce the RSC Advances Young African Researchers collection.

Remediation of water containing lead(II) using (3-iminodiacetic acid) propyltriethoxysilane graphene oxide.

A novel chelating adsorbent based on (3-iminodiacetic acid) propyltriethoxysilane graphene oxide (IAT-GO) has been developed, showing exceptional promise for capturing lead. IAT-GO is made by combining a high-surface-area graphene oxide with a specially designed chelating ligand, which can selectively and efficiently remove lead. The synthesis of IAT-GO involves a two-step progression. In the first step, covalent bonds form between graphene oxide and (3-aminopropyl)-triethoxysilane (AT) through hydrolysis, condensation, and epoxide ring opening reactions. In the second step, nucleophilic substitution reactions occur between the primary amines and chloroacetic acid (CAA). A comprehensive suite of characterization techniques, including XPS, UV-Vis, XRD, Raman, FTIR, TEM, and SEM, provides detailed insights into the IAT-GO adsorbent's chemical composition and physical form, elucidating its intricate structure and morphology. Optimizing the experimental conditions for using the adsorbent material to remove Pb(II) ions from contaminated water revealed a maximum adsorption capacity of 124.0 mg/g at pH 5 and 30 min. The IAT-GO displays high selectivity for Pb(II) in a mixture of six metal ions containing 100 ppm of each one. Moreover, the IAT-GO shows 100% removal of Pb(II) for concentrations lower than 50 ppm. The excellent fit of the experimental data with the Langmuir adsorption isotherm and pseudo-second-order kinetic models (R2 > 99%) indicates that Pb(II) ion uptake onto the IAT-GO surface occurs via the monolayer formation of mercury ions. IAT-GO demonstrates exceptional potential as an innovative adsorbent for lead-contaminated water. Nitric acid (0.4 M) effectively regenerates the material, while its reusability remains impressive even after five cycles (> 97% removal efficiency). Therefore, this study highlights the development of a groundbreaking material, IAT-GO, with exceptional potential for remediating lead-contaminated water. Its high efficiency, selectivity, reusability, and cost-effectiveness make it a promising candidate for real-world applications.

Solar-driven seawater desalination via plasmonic hybrid MOF/polymer and its antibacterial activity.

In recent years, solar seawater desalination has been considered to be a promising and cost-effective technique to produce clean sources for water treatment and water deficiency. In addition, this technique shows high photothermal conversion efficiency by solar collectors to transfer solar energy into heat and the transformation of molecules in the capillaries of solar evaporators. In this study, we report the preparation of graphene-supported MIL-125 with polyurethane foam (MGPU) for solar steam generation. We modified MGPU by using the plasmonic nanoparticles of Ag and a polymer of polyaniline to increase the evaporation rate. Polyurethane foam can float on the surface of water and self-pump water by its hydrophilic porous structure, superior thermal insulation capabilities, and easy fabrication. MIL-125 has a high salt rejection and higher water permeability. It can reduce the affinity between water molecules and the pore surface of membrane, making it simple for water molecules to move through the pores. GO is a great alternative for steam generation applications since it exhibits broad-band light. The strong solar absorption, photothermal conversion efficiency, and photoreaction efficiency are enhanced by the use of silver nanoparticles in the photoreaction. The salt resistance capability is enhanced in saline water in the presence of polyaniline in a composite. Under one solar irradiation, the Ag/PANI/GO@MIL-125 (Ag-PMG) nanocomposite demonstrates an average 1.26 kg m2 h-1 rate of evaporation and an efficiency as high as 90%. The composite exhibits remarkable stability and durability after more than 10 cycles of use without a noticeable decrease in activity. In addition, the composite exhibits excellent organic dye removal from contaminated water and generates pure condensed freshwater. The antibacterial photoactivity of the photocatalysts was examined against B. subtilis and E. coli. The results demonstrate that Ag-PMG shows higher antibacterial activity than MIL-125 and PMG. It was shown that the presence of rGO, PANI, and Ag in the sample enhances the antimicrobial activity.

Efficient removal of heavy metals from polluted water with high selectivity for Hg(ii) and Pb(ii) by a 2-imino-4-thiobiuret chemically modified MIL-125 metal-organic framework.

A highly porous adsorbent based on a metal-organic framework was successfully designed and applied as an innovative adsorbent in the solid phase for the heavy metal removal. MIL-125 was densely decorated by 2-imino-4-thiobiuret functional groups, which generated a green, rapid, and efficacious adsorbent for the uptake of Hg(ii) and Pb(ii) from aqueous solutions. ITB-MIL-125 showed a high adsorption affinity toward mercury(ii) ions of 946.0 mg g-1 due to covalent bond formation with accessible sulfur-based functionality. Different factors were studied, such as the initial concentration, pH, contact time, and competitive ions, under same circumstances at the room temperature. Moreover, the experimental adsorption data were in excellent agreement with the Langmuir adsorption isotherm and pseudo-second order kinetics. At a high concentration of 100 ppm mixture of six metals, ITB-MIL-125 exhibited a high adsorption capacity, reaching more than 82% of Hg(ii) compared to 62%, 30%, 2%, 1.9%, and 1.6% for Pb(ii), Cu(ii), Cd(ii), Ni(ii), and Zn(ii), respectively.

Green construction of eco-friendly phosphotungstic acid Sr-MOF catalysts for crystal violet removal and synthesis of coumarin and xanthene compounds.

There is an urgent need to improve engineering and synthetic chemistry, either through the use of eco-friendly starting materials or the proper design of novel synthesis routes. This reduces the contamination of toxic chemicals and helps the disposal of organic dyes. In the current work, a metal-organic framework-based Sr(ii) was fabricated to achieve the desired goal for dye removal and catalysis. Sr-MOF-based phosphotungstic acid (PWA/Sr-MOF) was hydrothermally synthesized to study its adsorption and catalytic activities. Remarkably, about 99.9% of crystal violet (CV) dye was removed using PWA/Sr-MOF within 90 min at room temperature. Various factors have been studied to investigate the optimum conditions such as pH of solution, initial dye concentration, contact time, and temperature. The maximum adsorption capacity of CV dye was reached after 90 min and well fitted the pseudo-second kinetic order and Langmuir adsorption isotherm. Coumarin and xanthene reactions were chosen to test the catalytic activity of the prepared PWA/Sr-MOF at 373 K. Furthermore, structural and chemical characterization of the fabricated samples was obtained using FT-IR, XRD, TGA, DTA, TEM, EDX, and XPS. PWA/Sr-MOF can be considered as a promising and green framework in the material design used to study catalytic and adsorption performances.

Thermoelectric Energy Harvesters: A Review of Recent Developments in Materials and Devices for Different Potential Applications.

The thermoelectric effect encompasses three different effects, i.e. Seebeck effect, Peltier effect, and Thomson effect, which are considered as thermally activated materials that alter directions in smart materials. It is currently considered one of the most challenging green energy harvesting mechanisms among researchers. The ability to utilize waste thermal energy that is generated by different applications promotes the use of thermoelectric harvesters across a wide range of applications. This review illustrates the different attempts to fabricate efficient, robust and sustainable thermoelectric harvesters, considering the material selection, characterization, device fabrication and potential applications. Thermoelectric harvesters with a wide range of output power generated reaching the milliwatt range have been considered in this work, with a special focus on the main advantages and disadvantages in these devices. Additionally, this review presents various studies reported in the literature on the design and fabrication of thermoelectric harvesters and highlights their potential applications. In order to increase the efficiency of equipment and processes, the generation of thermoelectricity via thermoelectric materials is achieved through the harvesting of residual energy. The review discusses the main challenges in the fabrication process associated with thermoelectric harvester implementation, as well as the considerable advantages of the proposed devices. The use of thermoelectric harvesters in a wide range of applications where waste thermal energy is used and the impact of the thermoelectric harvesters is also highlighted in this review.