Uptake, translocation, and nutrient efficiency of nano-bonechar as a plant growth regulator in hydroponics and soil systems.

The use of nanotechnology in terms of nanoparticles, carbon nanotubes, and quantum dots, when exposed to the plants, helps increase their productivity. It is worth the effort to comprehend the fate of these nanoparticles in plants. Bonechar derived from bones is a rich source of C, P, Ca2+, and Mg2+ nutrients, which can significantly contribute to the growth of the plants. This study focused on the uptake of nano-bonechar (NBC) in the Syngonium podophyllum plant, and its effects on plant growth under hydroponics and soil systems. The compound microscopy and SEM-EDX results confirmed the presence of NBC in the leaves and roots of the plants in hydroponics and soil systems. The FTIR spectra reflected the presence of functional groups of the NBC in the leaves of the Syngonium podophyllum plant. The plant's growth parameters showed an increase in fresh weight, dry weight, shoot length, chlorophyll content, leaf count, total Ca2+, total PO43-, and total organic carbon of plants in both systems. The NBC not just improved plant physiochemical parameters but also built up the soil quality in terms of bioavailable Ca2+, PO43-, water holding capacity, and soil organic matter. It is concluded that the production of carbon-based NBC not only helps manage bone waste but also their efficient uptake in plants significantly improving plant productivity.

Adsorption-coupled Fenton type reduction of bromate in water by high-yield polymer-derived ceramic-supported nano-zerovalent iron.

Nano-zerovalent iron (nZVI) is a promising material for the removal of both organic and inorganic pollutants from contaminated water. This study investigates the potential of a novel composite of nZVI on a polymer-derived supporting ceramic (nZVI-PDC) synthesized via the liquid-phase reduction method for the simultaneous adsorption and Fenton-type reduction of bromate anion (BrO3-) in water. The nZVI nanoparticles were effectively anchored onto the PDC by impregnating high-yield carbon in a ferrous sulfate solution. The PDC facilitated the uniform dispersion of nZVI nanoparticles due to its multiple active sites distributed within mesocarbon cavities. The developed nZVI-PDC composite exhibited a high specific surface area of 837 m2 g-1 and an ordered mesoporous structure with a pore volume of 0.37 cm3 g-1. As an adsorbent, the nZVI-PDC composite exhibited a maximum adsorption capacity (qe) of 842 mg g-1 and a partition coefficient (KH) of 10.2 mg g-1 µM-1, as calculated by the pseudo-second-order model. As a catalyst, the composite demonstrated a reaction kinetic rate of 43.5 µmol g-1 h-1 within 6 h at pH 4, using a dosage of 60 mg L-1 nZVI-PDC and a concentration of 0.8 mmol L-1 H2O2. Comparatively, PDC exhibited a qe of 408 mg g-1, KH of 1.67 mg g-1 µM-1, and a reaction rate of 20.8 µmol g-1 h-1, while nZVI showed a qe of 456 mg g-1, KH of 2.30 mg g-1 µM-1, and a reaction rate of 27.2 µmol g-1 h-1. The modelling indicated that the nZVI-PDC composite followed pseudo-second-order kinetics. The remarkable removal efficiency of the nZVI-PDC composite was attributed to the synergistic effects between PDC and nZVI, where PDC facilitated charge transfer, promoting Fe2+ generation and the Fe3+/Fe2+ cycle. Overall, this work introduces a promising adsorption technology for the efficient removal of BrO3- from contaminated aqueous solutions, highlighting the significant potential of the nZVI-PDC composite in water purification applications.

A mechanistic approach to arsenic adsorption and immobilization in aqueous solution, groundwater, and contaminated paddy soil using pine-cone magnetic biochar.

Arsenic (As) poisoning in groundwater and rice paddy soil has increased globally, impacting human health and food security. There is an urgent need to deal with As-contaminated groundwater and soil. Biochar can be a useful remedy for toxic contaminants. This study explains the synthesis of pinecone-magnetic biochar (PC-MBC) by engineering the pinecone-pristine biochar with iron salts (FeCl3.6H2O and FeSO4.7H2O) to investigate its effects on As(V) adsorption and immobilization in water and soil, respectively. The results indicated that PC-MBC can remediate As(V)-contaminated water, with an adsorption capacity of 12.14 mg g-1 in water. Isotherm and kinetic modeling showed that the adsorption mechanism involved multilayer, monolayer, and diffusional processes, with chemisorption operating as the primary interface between As(V) and biochar. Post-adsorption analysis of PC-MBC, using FTIR and XRD, further revealed chemical fixing and outer-sphere complexation between As(V) and Fe, O, NH, and OH as the main reasons for As(V) adsorption onto PC-MBC. Recycling of PC-MBC also had excellent adsorption even after several regeneration cycles. Similarly, PC-MBC successfully immobilized As in paddy soil. Single and sequential extraction results showed the transformation of mobile forms of As to a more stable form, confirmed by non-destructive analysis using SEM, EDX, and elemental dot mapping. Thus, Fe-modified pine-cone biochar could be a suitable and cheap adsorbent for As-contaminated water and soil.

Synergistic biochar and Serratia marcescens tackle toxic metal contamination: A multifaceted machine learning approach.

Metal contamination in soil poses environmental and health risks requiring effective remediation strategies. This study introduces an innovative approach of synergistically employing biochar and bacterial inoculum of Serratia marcescens to address toxic metal (TM) contamination. Physicochemical, enzymatic, and microbial analyses were conducted, employing integrated biomarker response (IBR) and machine-learning approaches for toxicity estimation. The combined application significantly reduced the Cd, Cr, and Pb concentrations by 71.6, 31.2, and 57.1%, respectively, while the Cu concentration increased by 85% in the individual Serratia marcescens treatment. Biochar enhanced microbial biomass by 33-44% after 25 days. Noteworthy physicochemical improvements included a 44.7% increase in organic content and a decrease in pH and electrical conductivity. The K⁺ and Ca2⁺ concentrations increased by 196.9 and 21.6%, respectively, while the Mg2⁺ content decreased by 86.4%. Network analysis revealed intricate relationships, displaying direct and indirect negative correlations between metals and soil physicochemical parameters. The IBR index values indicated effective mitigation of TM toxicity in Serratia marcescens and biochar with individual and combined treatments. Binary classification demonstrated high sensitivity (80.1%) and specificity (80.5%) in identifying TM-contaminated soil. These findings indicate significant biochar- and Serratia marcescens-induced impacts on toxic metal availability, physicochemical properties, and enzymatic activities in metal-contaminated soil, suggesting that blending soil with biochar and microorganisms is an effective remediation strategy.

Investigating the potential of nanobonechar toward climate-smart agriculture.

Extreme climates and the unpredictability of the weather are significant obstacles to agricultural productivity. This study is the first attempt to explore the capacity of nanobonechar (NBC) for promoting climate-smart agriculture. A pot experiment was performed on maize (Zea mays L.) under a deficit irrigation system (40, 70, and 100% irrigation rates) using different soil application rates of the NBC (0, 0.5, 1, and 2% wt/wt). Additionally, the CO2-C efflux rate and cumulative CO2-C were measured in an incubation experiment. The results indicated the best performance of the 1% NBC treatment under a 70% irrigation rate in terms of the fresh and dry weights of maize plants. Total PO43- and Ca2+ were significantly higher in the plants grown in the NBC-amended soil as compared to the control, showing a gradual increase with an increase in the NBC application rate. The improved productivity of maize plants under a deficit irrigation system was associated with enhanced water-holding capacity, organic matter, and bioavailability of cations (Ca2+, K+, and Na+) and anions (PO43- and NO3-) in the soils amended with NBC. The CO2-C efflux rate and cumulative CO2-C emissions remain higher in the NBC-amended soil than in the un-amended soil, pertaining to the high contents of soil organic matter emanating from the NBC. We conclude that NBC could potentially be used as a soil amendment for promoting maize growth under a water stress condition.

A remediation approach to chromium-contaminated water and soil using engineered biochar derived from peanut shell.

Hexavalent chromium (Cr[VI]) is one of the major environmental concerns due to its excessive discharge through effluents from the leather tanning industry. Peanut production leads to the generation of residual shells as waste calling for sustainable disposal. In this study, we employed an innovative approach of applying peanut-shell-derived pristine and engineered biochar for the remediation of Cr-contaminated wastewater and soil. The peanut shell waste was converted to biochar, which was further engineered with cetyltrimethylammonium bromide (CTAB, a commonly used cationic surfactant). The biochars were then used for the adsorption and immobilization of Cr(VI) in water and soil, respectively. The adsorption experiments demonstrated high Cr(VI) removal efficiency for the engineered biochar (79.35%) compared with the pristine biochar (37.47%). The Langmuir model best described the Cr(VI) adsorption onto the biochars (R2 > 0.97), indicating monolayer adsorption. Meanwhile, the adsorption kinetics indicated that chemisorption was the dominant mechanism of interaction between the Cr(VI) and the biochars, as indicated by the best fitting to the pseudo-second-order model (R2 > 0.98). Adsorption through the fixed-bed column also presented higher Cr(VI) adsorption onto the engineered biochar (qeq = 22.93 mg g-1) than onto the pristine biochar (qeq = 18.54 mg g-1). In addition, the desorption rate was higher for the pristine biochar column (13.83 mg g-1) than the engineered biochar column (10.45 mg g-1), indicating that Cr(VI) was more strongly adsorbed onto the engineered biochar. A higher immobilization of Cr(VI) was observed in the soil with the engineered biochar than with the pristine biochar, as was confirmed by the significant decreases in the Cr(VI) bioavailability (92%), leachability (100%), and bioaccessibility (97%) compared with the control (soil without biochar). The CTAB-engineered biochar could thus potentially be used as an efficient adsorbent for the removal and the immobilization of Cr(VI) in water and soil, respectively.

Effectiveness of the engineered pinecone-derived biochar for the removal of fluoride from water.

Drinking fluoride (F-)-contaminated water (>1.5 mg L-1) causes severe dental and skeletal disorders. In the central province of Pakistan, ∼20 times higher levels of F- in the drinking groundwater (compared with the 1.5 mg L-1 permissible limit of the World Health Organization) are triggering bone abnormalities in teenagers. In this study, we demonstrated the potential of pinecone-derived biochar (pristine) impregnated with Fe- and Al-salts (engineered) to defluoridate water. Batch mode adsorption experiments were carried out under variable conditions of solution pH, F- initial concentration, adsorbent dose, and contact time. The engineered biochars resulted in greater adsorption than that of pristine biochar. Specifically, the AlCl3-modified biochar exhibited a maximum adsorption capacity of 14.07 mg g-1 in spiked water and 13.07 mg g-1 in in-situ groundwater. The equilibrium isothermal and kinetic models predicted monolayer, cooperative, and chemisorption types of the adsorption process. The chemical interaction and outer-sphere complexation of F- with Al, Na, and H elements were further confirmed by the post-adsorption analysis of the AlCl3-modified biochar by FTIR and XRD. The AlCl3-modified biochar resulted in 87.13% removal of F- from the in-situ F--contaminated groundwater, even in the presence of naturally occurring competing ions (such as Cl-, HCO3-, SO42-, and NO3-). We conclude that the AlCl3-modified biochar derived from pinecone could be a promising cost-effective adsorbent for the defluoridation of water.

Design and characterization of a biomass template/SnO2 nanocomposite for enhanced adsorption of 2,4-dichlorophenol.

2,4-Dichlorophenol (2,4-DCP) is a hazardous chlorinated organic chemical derived from phenol that exerts serious effects on living organisms. In the present study, SnO2 templated with grapefruit peel carbon as a nanocomposite (SnO2@GPC) was designed via ball-milling, and its mechanism of 2,4-DCP adsorption in aqueous solution was determined. Batch adsorption experiments revealed that the maximum adsorption efficiency of SnO2@GPC occurred at 6.0 pH, 3 mg L-1 initial adsorbate concentration, 2 h contact time, and 293 K temperature. The SnO2@GPC nanocomposite and its non-tin-bearing counterpart, grapefruit derived char (@GPC), showed maximum adsorption capacities (QL) of 45.95 and 22.09 mg g-1 and partition coefficients of 41.77 and 10.83 mg g-1 µM-1, respectively. The adsorption of 2,4-DCP was best described by the Redlich-Peterson model followed by the Langmuir model with high correlation coefficients (R2 ≥ 0.96), and the adsorption kinetic data best fitted the pseudo-second-order model (R2 ≥ 0.98). The thermodynamic parameters indicated that the reaction was spontaneous, exothermic, and involved high affinity between SnO2@GPC and 2,4-DCP. The high desorption efficiency obtained (>80%) demonstrated the recyclability of the adsorbent. The enhanced QL of SnO2@GPC was due to the effective combination of GPC and SnO2. A thin porous layer of GPC on SnO2 nanoparticles provided effective channels, a large surface area, and an abundance of active sites for 2,4-DCP adsorption. Thus, the SnO2@GPC nanocomposite could potentially be used as a low-cost adsorbent to remove 2,4-DCP from water.

Correction to: Date palm waste-derived biochar composites with silica and zeolite: synthesis, characterization and implication for carbon stability and recalcitrant potential.

Unfortunately, in the original publication of the article, Prof. Yong Sik Ok's affiliation was incorrectly published.

Date palm waste-derived biochar composites with silica and zeolite: synthesis, characterization and implication for carbon stability and recalcitrant potential.

Engineered organo-mineral composites were synthesized from date palm waste biochar and silica or zeolite via mechanochemical treatments. Date palm tree rachis (leaves) waste biomass was pre-treated with silica or zeolite minerals via ball milling and sonication prior to pyrolysis at 600 °C. The resultant organo-mineral composites and pristine materials were characterized using X-ray diffraction, thermogravimetric-differential thermal (TG-DTA), Fourier transform infrared, scanning electron microscope analyses and surface area and porosity analyzer to investigate the variations in physiochemical and structural characteristics. Compared to the resultant composites derived from non-milled date palm biomass, ball milling increased surface area, while decreased crystallinity index and effective particle size of the biochar composites. Silica composited biochars were located near origin in the van Krevelen diagram indicating lowest H/C and O/C molar ratios, thus suggesting higher aromaticity and lower polarity compared to other biochars. TGA thermograms indicated highest thermal stability of silica composited biochars. Ash and moisture corrected TGA thermograms were used to calculate recalcitrance index (R50) of the materials, which speculated high degradability of biomass (R50 < 0.4), minimal degradability of biochars and zeolite composited biochars (0.5 < R50 < 0.7) and high recalcitrant nature of silica composited biochars (R50 > 0.7). Silica composited biochars exhibited highest carbon sequestration potential (64.17-95.59%) compared to other biochars. Highest recalcitrance and carbon sequestration potential of silica composited biochars may be attributed to changes in structural arrangements in the silica-biochar complex. Encapsulations of biochar particles with amorphous silica via Si-C bonding may have prevented thermal degradation, subsequently increasing recalcitrance potential of silica composited biochars.

Correction to: Contrasting effects of engineered carbon nanotubes on plants: a review.

Unfortunately, in the original publication of the article, Prof. Yong Sik Ok's affiliation was incorrectly published. The author's affiliation is as follows.

Contrasting effects of engineered carbon nanotubes on plants: a review.

Rapid surge of interest for carbon nanotube (CNT) in the last decade has made it an imperative member of nanomaterial family. Because of the distinctive physicochemical properties, CNTs are widely used in a number of scientific applications including plant sciences. This review mainly describes the role of CNT in plant sciences. Contradictory effects of CNT on plants physiology are reported. CNT can act as plant growth inducer causing enhanced plant dry biomass and root/shoot lengths. At the same time, CNT can cause negative effects on plants by forming reactive oxygen species in plant tissues, consequently leading to cell death. Enhanced seed germination with CNT is related to the water uptake process. CNT can be positioned as micro-tubes inside the plant body to enhance the water uptake efficiency. Due to its ability to act as a slow-release fertilizer and plant growth promoter, CNT is transpiring as a novel nano-carbon fertilizer in the field of agricultural sciences. On the other hand, accumulation of CNT in soil can cause deleterious effects on soil microbial diversity, composition and population. It can further modify the balance between plant-toxic metals in soil, thereby enhancing the translocation of heavy metal(loids) into the plant system. The research gaps that need careful attention have been identified in this review.

Trace metal levels, sources, and ecological risk assessment in a densely agricultural area from Saudi Arabia.

The present study was conducted in one of the most densely cultivated area of Al-Qassim region in Kingdom of Saudi Arabia to (i) monitor trace metal (Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, and Zn) contents in surface and subsurface soils, (ii) assess the pollution and potential ecological risk levels of trace metals, and (iii) identify trace metal sources using enrichment factor (EF), correlation matrix, and principal component analysis (PCA). The pollution levels of the analyzed trace metals calculated by the geoaccumulation index (I geo) and contamination factor (C f) suggested that the soils were highly contaminated with Cd and moderately contaminated with Pb. Based on the average values of EF, soil samples were found to present extremely high enrichment for Cd, significant enrichment for Pb, moderate enrichment for Zn, and deficient to minimal enrichment for other trace metals. Among the analyzed trace metals, a very high ecological risk was observed only in the case of Cd at some sampling sites. Meanwhile, other investigated trace metals had a low ecological risk. The results of PCA combined with correlation matrix suggested that Fe, Mn, Zn, Cu, Cr Ni, Cu, and Co represent natural abundance in soil, but Cd, Pb, and Cu are of anthropogenic inputs, mainly due to agrochemical and fertilizer applications. It could be generally concluded that the obtained results can be useful for assessing and conducting a future program for trace metal monitoring in agricultural areas of Saudi Arabia.

Impact of soybean stover- and pine needle-derived biochars on Pb and As mobility, microbial community, and carbon stability in a contaminated agricultural soil.

Biochar is gaining attention as a potential soil amendment to remediate and revitalize the contaminated soils. Simultaneous effects of biochar on metals mobility, microbial abundance, bacterial diversity and carbon storage in soil are scarcely addressed. This study assessed the effect of biochars on metal mobility, microbial abundance, bacterial community, and carbon storage in an agricultural soil contaminated with heavy metals. Biochars derived from soybean stover at 300 and 700 °C (S-BC300 and S-BC700, respectively) and pine needles at the same temperatures (P-BC300 and P-BC700, respectively) were used. A maximum reduction of Pb mobility by 95% was observed from a soil treated with S-BC700, associated with precipitation of chloropyromorphite and hydroxylpyromorphite. In contrast, As was desorbed from soil particles because of P competition. The abundance of Gram-positive and negative bacteria, fungi, actinomycetes, and arbuscular mycorrhizal fungi increased in the soils treated with biochar produced at 300 °C, possibly due to the high dissolved organic and active organic carbons. Microbial abundance in the soils treated with S-BC700 and P-BC700 was constant due to the existence of fixed or non-labile carbon. Changes to bacterial communities in the biochar-treated soils depended on feedstock type and pyrolysis temperature. Actinobacteria substantially increased whereas Acidobacteria and Chloroflexi decreased in the biochar-treated soils. The non-labile carbon fraction was ∼25 fold higher in the biochar-treated soil than the control soil, indicating long-term carbon storage.

Chemically modified biochar produced from conocarpus waste increases NO3 removal from aqueous solutions.

Biochar has emerged as a universal sorbent for the removal of contaminants from water and soil. However, its efficiency is lower than that of commercially available sorbents. Engineering biochar by chemical modification may improve its sorption efficiency. In this study, conocarpus green waste was chemically modified with magnesium and iron oxides and then subjected to thermal pyrolysis to produce biochar. These chemically modified biochars were tested for NO3 removal efficiency from aqueous solutions in batch sorption isothermal and kinetic experiments. The results revealed that MgO-biochar outperformed other biochars with a maximum NO3 sorption capacity of 45.36 mmol kg(-1) predicted by the Langmuir sorption model. The kinetics data were well described by the Type 1 pseudo-second-order model, indicating chemisorption as the dominating mechanism of NO3 sorption onto biochars. Greater efficiency of MgO-biochar was related to its high specific surface area (391.8 m(2) g(-1)) and formation of strong ionic complexes with NO3. At an initial pH of 2, more than 89 % NO3 removal efficiency was observed for all of the biochars. We conclude that chemical modification can alter the surface chemistry of biochar, thereby leading to enhanced sorption capacity compared with simple biochar.

Identification, Quantification, and Toxicity of PCDDs and PCDFs in Soils from Industrial Areas in the Central and Eastern Regions of Saudi Arabia.

This study was conducted to identify and quantify polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) in soil samples collected from selected industrial areas in the central and eastern regions of Saudi Arabia. All the investigated compounds of PCDDs/PCDFs were identified in the studied locations. The average concentrations of PCDDs (sum of seven congeners measured) ranged from 11.5 to 59.6 pg g(-1), with a maximum concentration of 125.7 pg g(-1) at an oil refinery station followed by 100.9 pg g(-1) at a cement factory. The average concentrations of PCDFs (sum of 10 congeners measured) accounted for 11.68-19.35 pg g(-1), with a maximum concentration of 38.67 pg g(-1) at the cement factory. It was generally observed that the soil samples collected from industrial areas have substantially high toxicity equivalence (TEQ) values of PCDDs/PCDFs compared to soils of remote areas. Principal component analysis revealed that the cement factories and oil refineries were the primary sources of PCDDs and PCDFs.

Mechanisms of antimony adsorption onto soybean stover-derived biochar in aqueous solutions.

Limited mechanistic knowledge is available on the interaction of biochar with trace elements (Sb and As) that exist predominantly as oxoanions. Soybean stover biochars were produced at 300 °C (SBC300) and 700 °C (SBC700), and characterized by BET, Boehm titration, FT-IR, NMR and Raman spectroscopy. Bound protons were quantified by potentiometric titration, and two acidic sites were used to model biochar by the surface complexation modeling based on Boehm titration and NMR observations. The zero point of charge was observed at pH 7.20 and 7.75 for SBC300 and SBC700, respectively. Neither antimonate (Sb(V)) nor antimonite (Sb(III)) showed ionic strength dependency (0.1, 0.01 and 0.001 M NaNO3), indicating inner sphere complexation. Greater adsorption of Sb(III) and Sb(V) was observed for SBC300 having higher -OH content than SBC700. Sb(III) removal (85%) was greater than Sb(V) removal (68%). Maximum adsorption density for Sb(III) was calculated as 1.88 × 10(-6) mol m(-2). The Triple Layer Model (TLM) successfully described surface complexation of Sb onto soybean stover-derived biochar at pH 4-9, and suggested the formation of monodentate mononuclear and binuclear complexes. Spectroscopic investigations by Raman, FT-IR and XPS further confirmed strong chemisorptive binding of Sb to biochar surfaces.

The role of biochar, natural iron oxides, and nanomaterials as soil amendments for immobilizing metals in shooting range soil.

High concentration of toxic metals in military shooting range soils poses a significant environmental concern due to the potential release of metals, such as Pb, Cu, and Sb, and hence requires remediation. The current study examined the effectiveness of buffalo weed (Ambrosia trifida L.) biomass and its derived biochars at pyrolytic temperatures of 300 and 700 °C, natural iron oxides (NRE), gibbsite, and silver nanoparticles on metal immobilization together with soil quality after 1-year soil incubation. Destructive (e.g., chemical extractions) and non-destructive (e.g., molecular spectroscopy) methods were used to investigate the immobilization efficacy of each amendment on Pb, Cu, and Sb, and to explore the possible immobilization mechanisms. The highest immobilization efficacy was observed with biochar produced at 300 °C, showing the maximum decreases of bioavailability by 94 and 70% for Pb and Cu, respectively, which were attributed to the abundance of functional groups in the biochar. Biochar significantly increased the soil pH, cation exchange capacity, and P contents. Indeed, the scanning electron microscopic elemental dot mapping and X-ray absorption fine structure spectroscopic (EXAFS) studies revealed associations of Pb with P (i.e., the formation of stable chloropyromorphite [Pb5(PO4)3Cl]) in the biomass- or biochar-amended soils. However, no amendment was effective on Sb immobilization.

Inhibitory effect of veterinary antibiotics on denitrification in groundwater: a microcosm approach.

Veterinary antibiotics in groundwater may affect natural microbial denitrification process. A microcosm study was conducted to evaluate the influence of sulfamethazine and chlortetracycline at different concentrations (0, 0.01, 0.1, and 1.0 mg/L) on nitrate reduction in groundwater under denitrifying condition. Decrease in nitrate removal and nitrite production was observed with the antibiotics. Maximum inhibition of nitrate removal was observed after seven days of incubation with 0.01 mg/L sulfamethazine (17.0%) and 1.0 mg/L chlortetracycline (15.4%). The nitrite production was inhibited with 1.0 mg/L sulfamethazine to 82.0% and chlortetracycline to 31.1%. The initial/final nitrate concentrations indicated that 0.01 mg/L sulfamethazine and 1.0 mg/L chlortetracycline were most effective in inhibiting activity of denitrifying bacteria in groundwater. After 12 days of incubation, the sulfamethazine biodegradation was observed whereas chlortetracycline was persistent. Sulfamethazine and chlortetracycline in groundwater could inhibit the growth and capability of naturally occurring denitrifying bacteria, thereby threatening nitrate pollution in groundwater.

Sorption of polycyclic aromatic hydrocarbons (PAHs) to lignin: effects of hydrophobicity and temperature.

The study of the sorption of contaminants to lignin is significant for understanding the migration of contaminants in the environment as well as developing low cost sorbent. In this study, sorption of three polycyclic aromatic hydrocarbons (PAHs), naphthalene, acenaphthene and phenanthrene, to lignin was investigated. Sorption isotherms were well described by both linear and Freundlich sorption models. Sorption coefficients of PAHs to lignin from water obtained from regression of both linear model (K d) and Freundlich model (K f) were highly positively correlated with hydrophobicity of PAHs. The amorphous structure of lignin provided sufficient sorption domain for partitioning of PAHs, and the attraction between PAHs molecules and aromatic fractions in lignin via π-π electron-donor-acceptor (π-π EDA) interaction is hypothesized to provide a strong sorption force. Thermodynamic modeling revealed that sorption of PAHs to lignin was a spontaneous and exothermic process.