Exhaled Breath Aerosol Shedding of Highly Transmissible Versus Prior Severe Acute Respiratory Syndrome Coronavirus 2 Variants.

BACKGROUND: Aerosol inhalation is recognized as the dominant mode of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) transmission. Three highly transmissible lineages evolved during the pandemic. One hypothesis to explain increased transmissibility is that natural selection favors variants with higher rates of viral aerosol shedding. However, the extent of aerosol shedding of successive SARS-CoV-2 variants is unknown. We aimed to measure the infectivity and rate of SARS-CoV-2 shedding into exhaled breath aerosol (EBA) by individuals during the Delta and Omicron waves and compared those rates with those of prior SARS-CoV-2 variants from our previously published work. METHODS: Individuals with coronavirus disease 2019 (COVID-19) (n = 93; 32 vaccinated and 20 boosted) were recruited to give samples, including 30-minute breath samples into a Gesundheit-II EBA sampler. Samples were quantified for viral RNA using reverse-transcription polymerase chain reaction and cultured for virus. RESULTS: Alpha (n = 4), Delta (n = 3), and Omicron (n = 29) cases shed significantly more viral RNA copies into EBAs than cases infected with ancestral strains and variants not associated with increased transmissibility (n = 57). All Delta and Omicron cases were fully vaccinated and most Omicron cases were boosted. We cultured virus from the EBA of 1 boosted and 3 fully vaccinated cases. CONCLUSIONS: Alpha, Delta, and Omicron independently evolved high viral aerosol shedding phenotypes, demonstrating convergent evolution. Vaccinated and boosted cases can shed infectious SARS-CoV-2 via EBA. These findings support a dominant role of infectious aerosols in transmission of SARS-CoV-2. Monitoring aerosol shedding from new variants and emerging pathogens can be an important component of future threat assessments and guide interventions to prevent transmission.

Infectious Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) in Exhaled Aerosols and Efficacy of Masks During Early Mild Infection.

BACKGROUND: Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) epidemiology implicates airborne transmission; aerosol infectiousness and impacts of masks and variants on aerosol shedding are not well understood. METHODS: We recruited coronavirus disease 2019 (COVID-19) cases to give blood, saliva, mid-turbinate and fomite (phone) swabs, and 30-minute breath samples while vocalizing into a Gesundheit-II, with and without masks at up to 2 visits 2 days apart. We quantified and sequenced viral RNA, cultured virus, and assayed serum samples for anti-spike and anti-receptor binding domain antibodies. RESULTS: We enrolled 49 seronegative cases (mean days post onset 3.8 ±â€…2.1), May 2020 through April 2021. We detected SARS-CoV-2 RNA in 36% of fine (≤5 µm), 26% of coarse (>5 µm) aerosols, and 52% of fomite samples overall and in all samples from 4 alpha variant cases. Masks reduced viral RNA by 48% (95% confidence interval [CI], 3 to 72%) in fine and by 77% (95% CI, 51 to 89%) in coarse aerosols; cloth and surgical masks were not significantly different. The alpha variant was associated with a 43-fold (95% CI, 6.6- to 280-fold) increase in fine aerosol viral RNA, compared with earlier viruses, that remained a significant 18-fold (95% CI, 3.4- to 92-fold) increase adjusting for viral RNA in saliva, swabs, and other potential confounders. Two fine aerosol samples, collected while participants wore masks, were culture-positive. CONCLUSIONS: SARS-CoV-2 is evolving toward more efficient aerosol generation and loose-fitting masks provide significant but only modest source control. Therefore, until vaccination rates are very high, continued layered controls and tight-fitting masks and respirators will be necessary.

From MAX Phase Carbides to Nitrides: Synthesis of V2GaC, V2GaN, and the Carbonitride V2GaC1-xNx.

The research in MAX phases is mainly concentrated on the investigation of carbides rather than nitrides (currently >150 carbides and only <15 nitrides) that are predominantly synthesized by conventional solid-state techniques. This is not surprising since the preparation of nitrides and carbonitrides is more demanding due to the high stability and low diffusion rate of nitrogen-containing compounds. This leads to several drawbacks concerning potential variations in the chemical composition of the MAX phases as well as control of morphology, the two aspects that directly affect the resulting materials properties. Here, we report how alternative solid-state hybrid techniques solve these limitations by combining conventional techniques with nonconventional precursor synthesis methods, such as the "urea-glass" sol-gel or liquid ammonia method. We demonstrate the synthesis and morphology control within the V-Ga-C-N system by preparing the MAX phase carbide and nitride─the latter in the form of bulkier and more defined smaller particle structures─as well as a hitherto unknown carbonitride V2GaC1-xNx MAX phase. This shows the versatility of hybrid methods starting, for example, from wet chemically obtained precursors that already contain all of the ingredients needed for carbonitride formation. All products are characterized in detail by X-ray powder diffraction, electron microscopy, and electron and X-ray photoelectron spectroscopies to confirm their structure and morphology and to detect subtle differences between the different chemical compositions.

Infectious virus in exhaled breath of symptomatic seasonal influenza cases from a college community.

Little is known about the amount and infectiousness of influenza virus shed into exhaled breath. This contributes to uncertainty about the importance of airborne influenza transmission. We screened 355 symptomatic volunteers with acute respiratory illness and report 142 cases with confirmed influenza infection who provided 218 paired nasopharyngeal (NP) and 30-minute breath samples (coarse >5-µm and fine ≤5-µm fractions) on days 1-3 after symptom onset. We assessed viral RNA copy number for all samples and cultured NP swabs and fine aerosols. We recovered infectious virus from 52 (39%) of the fine aerosols and 150 (89%) of the NP swabs with valid cultures. The geometric mean RNA copy numbers were 3.8 × 104/30-minutes fine-, 1.2 × 104/30-minutes coarse-aerosol sample, and 8.2 × 108 per NP swab. Fine- and coarse-aerosol viral RNA were positively associated with body mass index and number of coughs and negatively associated with increasing days since symptom onset in adjusted models. Fine-aerosol viral RNA was also positively associated with having influenza vaccination for both the current and prior season. NP swab viral RNA was positively associated with upper respiratory symptoms and negatively associated with age but was not significantly associated with fine- or coarse-aerosol viral RNA or their predictors. Sneezing was rare, and sneezing and coughing were not necessary for infectious aerosol generation. Our observations suggest that influenza infection in the upper and lower airways are compartmentalized and independent.

Magnetic and Electrocatalytic Properties of Nanoscale Cobalt Boride, Co3B.

The use of low-temperature solution synthesis followed by a brief annealing step allows metastable single-phase Co3B nanoparticles to be obtained, with sizes ranging from 11 to 22 nm. The particles are ferromagnetic with a saturation magnetization of 91 A m2 kg-1 (corresponding to 1.02 µB/Co) and a coercive field of 0.14 T at 5 K, retaining the semihard magnetic properties of bulk Co3B. They display a magnetic blocking temperature of 695 K and a Curie temperature near 710 K, but the measurement of these high-temperature properties was complicated by decomposition of the particles during heating in the magnetometer. Additionally, the nanoparticles of Co3B were investigated as an electrocatalyst in the oxygen evolution reaction and showed a low onset potential of 1.55 V vs RHE. XPS measurements were performed before and after the electrocatalytic measurements to study the surface of the catalyst, to pinpoint what appear to be the active surface species.

Manganese Tetraboride, MnB4: High-Temperature Crystal Structure, p-n Transition, (55)Mn NMR Spectroscopy, Solid Solutions, and Mechanical Properties.

The structural and electronic properties of MnB4 were studied by high-temperature powder X-ray diffraction and measurements of the conductivity and Seebeck coefficient on spark-plasma-sintered samples. A transition from the room-temperature monoclinic structure (space group P2(1)/c) to a high-temperature orthorhombic structure (space group Pnnm) was observed at about 650 K. The material remained semiconducting after the transition, but its behavior changed from p-type to n-type. (55)Mn NMR measurements revealed an isotropic chemical shift of -1315 ppm, confirming an oxidation state of Mn close to I. Solid solutions of Cr(1-x)Mn(x)B4 (two phases in space groups Pnnm and P2(1)/c) were synthesized for the first time. In addition, nanoindentation studies yielded values of (496±26) and (25.3±1.7) GPa for the Young's modulus and hardness, respectively, compared to values of 530 and 37 GPa obtained by DFT calculations.

Discovery of γ-MnP4 and the Polymorphism of Manganese Tetraphosphide.

A new polymorph of MnP4 was prepared by reaction of the elements via chemical vapor transport with iodine as transporting agent. The crystal structure was refined using single-crystal diffraction data (space group Cc, no. 9, a = 5.1049(8) Å, b = 10.540(2) Å, c = 10.875(2) Å, ß = 93.80(2)°). The phase is called γ-MnP4 as it is isostructural with γ-FeP4. It is the fourth reported binary polymorph in the MnP4 system, all of which are stacking variants of nets built with manganese and phosphorus atoms. In γ-MnP4, there are two Mn-Mn distances (2.93 and 3.72 Å) arising from a Peierls-like distortion effectively forming Mn2 dumbbells in the structure. Magnetic and electrical conductivity measurements show diamagnetism and a small anisotropic band gap (100-200 meV) with significantly enhanced conductivity along the crystallographic a axis. Calculations of the electronic and vibrational (phonon) structures show the P-P and Mn-P bonds within the nets are mainly responsible for the stability of the phase. The similar bonding motifs of the polymorphs give rise to the existence of numerous dynamically stable variants. The calculated Helmholtz energy shows the polymorph formation to be closely tied to temperature with the 6-MnP4 structure favorable at low temperatures, the 2-MnP4 favorable between approximately 800 and 2000 K, and 8-MnP4 preferred at high temperatures.

Metastable Ni7B3: A New Paramagnetic Boride from Solution Chemistry, Its Crystal Structure and Magnetic Properties.

We trapped an unknown metastable boride by applying low-temperature solution synthesis. Single-phase nickel boride, Ni7B3, was obtained as bulk samples of microcrystalline powders when annealing the amorphous, nanoscale precipitate that is formed in aqueous solution of nickel chloride upon reaction with sodium tetrahydridoborate. Its crystal structure was solved based on a disordered Th7Fe3-type model (hexagonal crystal system, space group P63mc, no. 186, a = 696.836(4) pm, c = 439.402(4) pm), using synchrotron X-ray powder data. Magnetic measurements reveal paramagnetism, which is in accordance with quantum chemical calculations. According to high-temperature X-ray diffraction and differential scanning calorimetry this nickel boride phase has a narrow stability window between 300 and 424 °C. It crystallizes at ca. 350 °C, then starts decomposing to form Ni3B and Ni2B above 375 °C, and shows an exothermic effect at 424 °C.

Selection of peptides binding to metallic borides by screening M13 phage display libraries.

BACKGROUND: Metal borides are a class of inorganic solids that is much less known and investigated than for example metal oxides or intermetallics. At the same time it is a highly versatile and interesting class of compounds in terms of physical and chemical properties, like semiconductivity, ferromagnetism, or catalytic activity. This makes these substances attractive for the generation of new materials. Very little is known about the interaction between organic materials and borides. To generate nanostructured and composite materials which consist of metal borides and organic modifiers it is necessary to develop new synthetic strategies. Phage peptide display libraries are commonly used to select peptides that bind specifically to metals, metal oxides, and semiconductors. Further, these binding peptides can serve as templates to control the nucleation and growth of inorganic nanoparticles. Additionally, the combination of two different binding motifs into a single bifunctional phage could be useful for the generation of new composite materials. RESULTS: In this study, we have identified a unique set of sequences that bind to amorphous and crystalline nickel boride (Ni3B) nanoparticles, from a random peptide library using the phage display technique. Using this technique, strong binders were identified that are selective for nickel boride. Sequence analysis of the peptides revealed that the sequences exhibit similar, yet subtle different patterns of amino acid usage. Although a predominant binding motif was not observed, certain charged amino acids emerged as essential in specific binding to both substrates. The 7-mer peptide sequence LGFREKE, isolated on amorphous Ni3B emerged as the best binder for both substrates. Fluorescence microscopy and atomic force microscopy confirmed the specific binding affinity of LGFREKE expressing phage to amorphous and crystalline Ni3B nanoparticles. CONCLUSIONS: This study is, to our knowledge, the first to identify peptides that bind specifically to amorphous and to crystalline Ni3B nanoparticles. We think that the identified strong binding sequences described here could potentially serve for the utilisation of M13 phage as a viable alternative to other methods to create tailor-made boride composite materials or new catalytic surfaces by a biologically driven nano-assembly synthesis and structuring.

Analyzing ammonia bridges--and more about bonding in boron-rich solids.

Three types of boron-rich compounds in unusual bonding situations are described: First, salts that contain closo-hydroborate anions and exhibit hydrogen and dihydrogen bonds and a strong ammonia network; second, boron-rich metal borides with an unexpected metal-metal bond stabilized by Peierls distortion; and third, nanoscale metal borides that bind selectively to certain heptapeptides identified by the phage display technique.

Peierls-distorted monoclinic MnB(4) with a Mn-Mn bond.

Tetraborides of chromium and manganese exhibit an unusual boron-atom framework that resembles the hypothetical tetragonal diamond. They are believed to be very hard. Single crystals of MnB4 have now been grown. The compound crystallizes in the monoclinic crystal system (space group P21 /c) with a structure that has four crystallographically independent boron-atom positions, as confirmed by (11) B MAS-NMR spectroscopy. An unexpected short distance between the Mn atoms suggests a double Mn-Mn bond and is caused by Peierls distortion. The structure was solved using group-subgroup-relationships. DFT calculations indicate Mn(I) centers and paramagnetism, as confirmed by magnetic measurements. The density of states shows a pseudo-band gap at the Fermi energy and semiconducting behavior was observed for MnB4 .

Relative efficacy of masks and respirators as source control for viral aerosol shedding from people infected with SARS-CoV-2: a controlled human exhaled breath aerosol experimental study.

BACKGROUND: Tight-fitting masks and respirators, in manikin studies, improved aerosol source control compared to loose-fitting masks. Whether this translates to humans is not known. METHODS: We compared efficacy of masks (cloth and surgical) and respirators (KN95 and N95) as source control for SARS-CoV-2 viral load in exhaled breath of volunteers with COVID-19 using a controlled human experimental study. Volunteers (N = 44, 43% female) provided paired unmasked and masked breath samples allowing computation of source-control factors. FINDINGS: All masks and respirators significantly reduced exhaled viral load, without fit tests or training. A duckbill N95 reduced exhaled viral load by 98% (95% CI: 97%-99%), and significantly outperformed a KN95 (p < 0.001) as well as cloth and surgical masks. Cloth masks outperformed a surgical mask (p = 0.027) and the tested KN95 (p = 0.014). INTERPRETATION: These results suggest that N95 respirators could be the standard of care in nursing homes and healthcare settings when respiratory viral infections are prevalent in the community and healthcare-associated transmission risk is elevated. FUNDING: Defense Advanced Research Projects Agency, National Institute of Allergy and Infectious Diseases, Centers for Disease Control and Prevention, the Bill & Melinda Gates Foundation, and The Flu Lab.

closo-Hydroborates from liquid ammonia: synthesis and crystal structures of [Li(NH3)4]2[B12H12]·2NH3, Rb2[B12H12]·8NH3, Cs2[B12H12]·6NH3 and Rb2[B10H10]·5NH3.

Ammonia complexes of hydroborates may be potentially promising materials for ammonia storage or indirect hydrogen storage. The title compounds contain 20.04-52.23 wt % ammonia and 5.94-13.01 wt % hydrogen. They were synthesized in liquid ammonia, using (NBu4)2[B12H12] and Li2[B10H10] as starting materials. [Li(NH3)4]2[B12H12]·2NH3 (1) crystallizes in the monoclinic crystal system (space group P2(1)/c, a = 9.183(2) Å, b = 8.133(1) Å, c = 16.375 Å, ß = 110.54(1)°, V = 1143.97(40) Å(3), Z = 2). The compound is a direct precursor of the hydrogen storage compound Li2[B12H12]·7NH3. Hydroborates of the heavier alkali metals were found to crystallize in the orthorhombic crystal system: Rb2[B12H12]·8NH3 (2) (space group Pnnm, a = 14.4166(6) Å, b = 7.8221(3) Å, c = 9.5792(4) Å, V = 1080.23(8) Å(3), Z = 2), Cs2[B12H12]·6NH3 (3) (space group Pbca, a = 7.7569(8) Å, b = 14.087(2) Å, c = 18.075(2) Å, V = 1974.99(30) Å(3), Z = 4), and Rb2[B10H10]·5NH3 (4) (space group Pnma, a = 13.9510(7) Å, b = 8.675(2) Å, c = 13.966(2) Å, V = 1690.2(3) Å(3), Z = 4), as determined by single crystal X-ray diffraction. The structures are discussed briefly.

Possible superhardness of CrB4.

Chromium tetraboride [orthorhombic, space group Pnnm (No. 58), a = 474.65(9) pm, b = 548.0(1) pm, c = 286.81(5) pm, and R value (all data) = 0.041], formerly described in space group Immm, was found not to be superhard, despite several theory-based prognoses. CrB(4) shows an almost temperature-independent paramagnetism, consistent with low-spin Cr(I) in a metallic compound. Conductivity measurements confirm the metallic character.

MXene Aerogel Derived Ultra-Active Vanadia Catalyst for Selective Conversion of Sustainable Alcohols to Base Chemicals.

Selective oxidation reactions are an important class of the current chemical industry and will be highly important for future sustainable chemical production. Especially, the selective oxidation of primary alcohols is expected to be of high future interest, as alcohols can be obtained on technical scales from biomass fermentation. The oxidation of primary alcohols produces aldehydes, which are important intermediates. While selective methanol oxidation is industrially established, the commercial catalyst suffers from deactivation. Ethanol selective oxidation is not commercialized but would give access to sustainable acetaldehyde production when using renewable ethanol. In this work, it is shown that employing 2D MXenes as building blocks allows one to design a nanostructured oxide catalyst composed of mixed valence vanadium oxides, which outperforms on both reactions known materials by nearly an order of magnitude in activity, while showing high selectivity and stability. The study shows that the synthesis route employing 2D materials is key to obtain these attractive catalysts. V4C3Tx MXene structured as an aerogel precursor needs to be employed and mildly oxidized in an alcohol and oxygen atmosphere to result in the aspired nanostructured catalyst composed of mixed valence VO2, V6O13, and V3O7. Very likely, the bulk stable reduced valence state of the material together coupled with the nanorod arrangement allows for unprecedented oxygen mobility as well as active sites and results in an ultra-active catalyst.

Wet-chemical synthesis of nanoscale iron boride, XAFS analysis and crystallisation to α-FeB.

The reaction of lithium tetrahydridoborate and iron bromide in high boiling ether as reaction medium produces an ultrafine, pyrophoric and magnetic precipitate. X-ray and electron diffraction proved the product to be amorphous. According to X-ray absorption fine structure spectroscopy (XAFS) the precipitate has FeB structure up to nearly two coordination spheres around an iron absorber atom. Transmission electron microscopy (TEM) confirms the ultrafine powder to be nanoscale. Subsequent annealing at 450 °C causes the atoms to arrange in a more distinct FeB structure, and further thermal treatment to 1050 °C extends the local structure to the α-modification of FeB. Between 1050 °C and 1500 °C α-FeB is transformed into ß-FeB.

Crystal structure refinement and bonding patterns of CrB4: a boron-rich boride with a framework of tetrahedrally coordinated B atoms.

Crystals of chromium tetraboride, a recently proposed candidate superhard material, have been grown for the first time to allow for a first structure refinement of the compound [orthorhombic, space group Immm (No. 71), a = 474.82(8) pm, b = 548.56(8) pm, and c = 287.17(4) pm, R value (all data) = 0.018]. The previously proposed structure model is confirmed, and accurate interatomic distances are presented for the first time. First-principles electronic structure calculations emphasize the unique framework of three-dimensionally linked B atoms that are tetrahedrally coordinated and carry a slightly negative charge. All B-B bonding is of the 2-center 2-electron type. CrB(4) is metallic with a pseudogap at the Fermi level.

Ventilation and laboratory confirmed acute respiratory infection (ARI) rates in college residence halls in College Park, Maryland.

Strategies to protect building occupants from the risk of acute respiratory infection (ARI) need to consider ventilation for its ability to dilute and remove indoor bioaerosols. Prior studies have described an association of increased self-reported colds and influenza-like symptoms with low ventilation but have not combined rigorous characterization of ventilation with assessment of laboratory confirmed infections. We report a study designed to fill this gap. We followed laboratory confirmed ARI rates and measured CO2 concentrations for four months during the winter-spring of 2018 in two campus residence halls: (1) a high ventilation building (HVB) with a dedicated outdoor air system that supplies 100% of outside air to each dormitory room, and (2) a low ventilation building (LVB) that relies on infiltration as ventilation. We enrolled 11 volunteers for a total of 522 person-days in the HVB and 109 volunteers for 6069 person-days in the LVB, and tested upper-respiratory swabs from symptomatic cases and their close contacts for the presence of 44 pathogens using a molecular assay. We observed one ARI case in the HVB (0.70/person-year) and 47 in the LVB (2.83/person-year). Simultaneously, 154 CO2 sensors distributed primarily in the dormitory rooms collected 668,390 useful data points from over 1 million recorded data points. Average and standard deviation of CO2 concentrations were 1230 ppm and 408 ppm in the HVB, and 1492 ppm and 837 ppm in the LVB, respectively. Importantly, this study developed and calibrated multi-zone models for the HVB with 229 zones and 983 airflow paths, and for the LVB with 529 zones and 1836 airflow paths by using a subset of CO2 data for model calibration. The models were used to calculate ventilation rates in the two buildings and potential for viral aerosol migration between rooms in the LVB. With doors and windows closed, the average ventilation rate was 12 L/s in the HVB dormitory rooms and 4 L/s in the LVB dormitory rooms. As a result, residents had on average 6.6 L/(s person) of outside air in the HVB and 2.3 L/(s person) in the LVB. LVB rooms located at the leeward side of the building had smaller average ventilation rates, as well as a somewhat higher ARI incidence rate and average CO2 concentrations when compared to those values in the rooms located at the windward side of the building. Average ventilation rates in twenty LVB dormitory rooms increased from 2.3 L/s to 7.5 L/s by opening windows, 3.6 L/s by opening doors, and 8.8 L/s by opening both windows and doors. Therefore, opening both windows and doors in the LVB dormitory rooms can increase ventilation rates to the levels comparable to those in the HVB. But it can also have a negative effect on thermal comfort due to low outdoor temperatures. Simulation results identified an aerobiologic pathway from a room occupied by an index case of influenza A to a room occupied by a possible secondary case.

Boron: elementary challenge for experimenters and theoreticians.

Many of the fundamental questions regarding the solid-state chemistry of boron are still unsolved, more than 200 years after its discovery. Recently, theoretical work on the existence and stability of known and new modifications of the element combined with high-pressure and high-temperature experiments have revealed new aspects. A lot has also happened over the last few years in the field of reactions between boron and main group elements. Binary compounds such as B(6)O, MgB(2), LiB(1-x), Na(3)B(20), and CaB(6) have caused much excitement, but the electron-precise, colorless boride carbides Li(2)B(12)C(2), LiB(13)C(2), and MgB(12)C(2) as well as the graphite analogue BeB(2)C(2) also deserve special attention. Physical properties such as hardness, superconductivity, neutron scattering length, and thermoelectricity have also made boron-rich compounds attractive to materials research and for applications. The greatest challenges to boron chemistry, however, are still the synthesis of monophasic products in macroscopic quantities and in the form of single crystals, the unequivocal identification and determination of crystal structures, and a thorough understanding of their electronic situation. Linked polyhedra are the dominating structural elements of the boron-rich compounds of the main group elements. In many cases, their structures can be derived from those that have been assigned to modifications of the element. Again, even these require a critical revision and discussion.

Disordered langasites La3Ga5MO14 : Eu3+ (M = Si, Ge, Ti) as red-emitting LED phosphors.

Polycrystalline powders of La3Ga5SiO14 (LGSi), La3Ga5GeO14 (LGGe), and La3Ga5TiO14 (LGTi) doped with Eu3+ were studied with respect to their use as luminescent materials in solid state lighting based on light-emitting diodes. The langasites were synthesized with up to 35% of trivalent europium to achieve the highest possible doping amount. According to diffuse reflection measurements the undoped compounds have band gap energies of 4.51 eV (LGSi), 4.54 eV (LGGe) and 4.07 eV (LGTi). The luminescence behavior between 77 K and 500 K was investigated, including excitation, emission and lifetime measurements to analyze the impact of the structural differences between the three langasites on the spectroscopic properties of the materials. Depending on the excitation wavelengths, 300 nm (charge transfer) and 394 nm (4f levels, i.e.7F0 → 5L6), different quenching temperatures were achieved for LGSi : Eu3+ 20% (TQ,300 = 438 K, TQ,394 = 422 K), LGGe : Eu3+ 20% (TQ,300 = 325 K, TQ,394 = 441 K) and LGTi : Eu3+ 20% (TQ,300 = 500 K, TQ,394 = 467 K). The quenching observed can be explained by three semi-quantitative configurational coordinate diagrams. Independent from the excitation wavelength and the temperature (77-300 K) decay times of 1.1 ms were measured. At room temperature and with an excitation wavelength of 394 nm maximum quantum efficiencies of 40% for LGSi : Eu, of 80% for LGGe : Eu, and of 81% for LGTi : Eu were reached. Finally, to prove the applicability as red LED phosphors, the langasites were built into LEDs with (In,Ga)N chips emitting at 394 nm.